Agilent 66300 Series Mobile Communications dc Power Sources

Agilent 66300 Series Mobile Communications dc Power Sources
®
E stablished 1981
Advanced Test Equipment Rentals
www.atecorp.com 800-404-ATEC (2832)
Agilent
66300 Series
Mobile Communications
dc Power Sources
Configuration Guide
Selection table
66311B
66311D
66309B
66309D
66321B
66321D
66319B
66319D
Fast response power technology
•
•
•
•
•
•
•
•
Peak current capability (up to 5 A)
•
•
•
•
•
•
•
•
Dynamic measurement capability
(talk mode, stand-by mode and off mode)
2
2
2
2
3
3
3
3
•
•
•
•
•
•
66332A
2
Measurement ranges
Battery emulation capability
Positive R Prog (0 to 1 Ohm)
Negative R Prog (to - 0.040 Ohms)
Replace main battery and power adapter
•
•
(requires dual dc outputs)
Output response compensation
2
2
2
2
4
4
4
4
Electronic load capability for calibrating
charger circuit A/D’s
•
•
•
•
•
•
•
•
Remote sense for improved accuracy
•
•
•
•
•
•
•
•
2
Programmable modes
•
Auxiliary built-in DVM
Broken sense lead protection
•
•
•
Output disconnect relays (Option 521)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Configuration information 2,3,4
Single output models
66311B
66311D
66321B
66321D
66332A
Single output dc power source
Single output dc power source with built-in auxiliary DVM
Single output dc power source with battery emulation
Single output dc power source with battery emulation
and built-in auxiliary DVM
Single output dc power source
Dual output models1
66309B
66309D
66319B
66319D
1
Dual output models recommended
for replacing the main battery and
power adapter/charger.
2
Battery emulation models are
recommended for simulating the
internal resistance of a battery. This
capability is available on output 1.
3
All models include built-in GPIB
interface.
4
IEEE- 488.2 SCPI command set,
plug&play drivers.
Dual output dc power source
Dual output dc power source with built-in auxiliary DVM
Dual output dc power source with battery emulation
Dual output dc power source with battery emulation and
built-in auxiliary DVM
Recommended models for
R&D
66319B/D, 66321B/D, 14565A1
Manufacturing 66311B/D, 66309B/D, 66321B/D, 66319B/D
Repair Stations 66311B/D, 66309B/D, 66321B/D, 66319B/D, 14565A1
2
66311B/D, 66309B/D, 66319B/D, 66321B/D, and 66332A
Option 100
Option 120
Option 220
Option 230
Option 0B0
Option 0L2
Option 0B3
Option 8ZE
Option 8ZJ
Set ac input voltage to 100 Vac (47 to 63 Hz)
Set ac input voltage to 120 Vac (47 to 63 Hz)
Set ac input voltage to 220 Vac (47 to 63 Hz)
Set ac input voltage to 230 Vac (47 to 63 Hz)
Delete manual set
Additional standard documentation package
Service manual (only available on 66311B/D, 66332A, and 66309B/D)
Refurbished instrument
Delete feet (if unit will be rack mounted)
Option 521
Solid state relays for output disconnect and independent
on/off output control
Option 020
Option 760
Option 1CP
Front panel output binding posts
Output disconnect relays
Rack flange kit with handles for 66332A
Option 1CM
Option ASX
Option 1CP
Rack flange kit without handles
Rack kit for mounting 2 units side-by-side (except 66332A)
Rack flange kit with handles for 66332A only
66309B/D and 66319B/D
66332A
Rack mounting
Rack mount with slides for two side-by-side units of different depths
(Order 5062-3996 and 1494-0015)
Rack mount for two side-by-side units of different depths
(Order 5062-3996)
Rack mount with slide for one unit
(Order 5062-3996, 1494-0015, 5062-4022)
Note: Support rails, E3663A, are required when rack
mounting units in Agilent rack cabinets
Equivalent Agilent part numbers for
Option 1CM
Option ASX
Option 1CP
5062-3972
5061-9694 and 5062-3974
5062-3975
Option UK6
Option W32
Option W34
Option 1BN
Option A6J
Commercial calibration certificate with test data
3-year customer return calibration service
3-year customer return standard compliance calibration service
Mil std 45662A calibration
Mil std 45662A calibration plus test data
14565A
10833A
10833B
10833C
10833D
Device characterization software
1 Meter GPIB cable
2 Meter GPIB cable
3 Meter GPIB cable
0.5 Meter GPIB cable
Hardware support option
Accessories
1
14565A device characterization software
3
Agilent Technologies’ Test and Measurement
Support, Services, and Assistance
Agilent Technologies aims to maximize the value
you receive, while minimizing your risk and problems. We strive to ensure that you get the test
and measurement capabilities you paid for and
obtain the support you need. Our extensive support resources and services can help you choose
the right Agilent products for your applications
and apply them successfully. Every instrument
and system we sell has a global warranty.
Support is available for at least five years beyond
the production life of the product. Two concepts
underlie Agilent’s overall support policy: “Our
Promise” and “Your Advantage.”
Our Promise
Our Promise means your Agilent test and measurement equipment will meet its advertised
performance and functionality. When you are
choosing new equipment, we will help you with
product information, including realistic performance specifications and practical recommendations from experienced test engineers. When you
receive your new Agilent equipment, we can help
verify that it works properly and help with initial
product operation.
Your Advantage
Your Advantage means that Agilent offers
a wide range of additional expert test and
measurement services, which you can purchase
according to your unique technical and business
needs. Solve problems efficiently and gain a
competitive edge by contracting with us for
calibration, extra-cost upgrades, out-of-warranty
repairs, and onsite education and training, as well
as design, system integration, project management,
and other professional engineering services.
Experienced Agilent engineers and technicians
worldwide can help you maximize your productivity,
optimize the return on investment of your Agilent
instruments and systems, and obtain dependable
measurement accuracy for the life of those products.
Agilent Email Updates
www.agilent.com/find/emailupdates
Get the latest information on the products and
applications you select.
For more assistance with your test and measurement needs or to find your local Agilent office
go to: www.agilent.com/find/assist
For more information on Agilent
Technologies’ products, applications or
services, please contact your local Agilent
office. The complete list is available at:
www.agilent.com/find/contactus
Phone or Fax
United States:
(tel) 800 829 4444
(fax) 800 829 4433
Canada:
(tel) 877 894 4414
(fax) 905 282 6495
China:
(tel) 800 810 0189
(fax) 800 820 2816
Europe:
(tel) 31 20 547 2111
Japan:
(tel) (81) 426 56 7832
(fax) (81) 426 56 7840
Korea:
(tel) (080) 769 0800
(fax) (080)769 0900
Latin America:
(tel) (305) 269 7500
Taiwan:
(tel) 0800 047 866
(fax) 0800 286 331
Other Asia Pacific Countries:
(tel) (65) 6375 8100
(fax) (65) 6755 0042
Email: tm_ap@agilent.com
Product specifications and descriptions
in this document subject to change
without notice.
Windows is a U.S. registered trademark
of Microsoft Corporation.
© Agilent Technologies, Inc. 2005
Printed in USA, June 27, 2005
5988-4226EN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising