57004_QUIKSET TABLE TENNIS TABLE_INST

57004_QUIKSET TABLE TENNIS TABLE_INST
AGES 8+
QUIKSET
®
TABLE TENNIS
ITEM NUMBER: 57004
Please visit
www.franklinsports.com/57004
for instructional video
For all your replacement part needs, please visit:
www.franklinsports.com/57004
CHOKING HAZARD --Small parts.
Not for children under 3 yrs.
Adult assembly required.
Made In China
Franklin Sports Inc.
Stoughton, MA 02072
57004-R1
57004-R2
57004-R3
6
57004-R4
7
8
4
4
Nut
57004-R5
9
57004-R7
10
Metal Washers
57004-R9
Rep.part: 57004-R8
23
X4
plastic clips
15
X4
X8
Leg Leveler Cap
57004-R1015
11
6mm x 25mm Bolts
6mm x 45mm Bolts
57004-R6
15
57004-R23
14
13
12
8
4
57004-R11
57004-R12
57004-R13
57004-R15
57004-R17
20
Rep.part: 57004-R19
16
8
57004-R16
8
18
40
16
19
57004-R14
17
16
15
8
57004-R18
21
Plastic Tubes
Rep.part: 57004-R20
16
57004
8
22
Corner Cap
Rep.part: 57004-R21
16
8
Carrying Strap
4
Rep.part: 57004-R22
16
For replacement parts:
Visit: www.franklinsports.com/57004
Email: replacementparts@franklinsports.com
Call: 1-800-225-8649
ASSEMBLY INSTRUCTIONS
GENERAL NOTE
1. Find a clean, level place to begin the
assembly of your Table Tennis Table.
We recommend that two adults work
together to assemble this Table
Tennis Table.
2. Remove all the parts from the box and verify
that you have all of the listed parts as shown
on the parts list page. Carefully cut or tear the
four corners of the box so that the bottom of
the box can be used as your work surface.
PARTS
STEP 1
4
4
x2
Open the two Table
Halves (#1) as shown.
2
x4
Unscrew the 4 Leg
Levelers (#4) to
retrieve the two
Support Bars (#2).
3
x2
4
x8
1
3
2
2
4
NOTE
4
3
1
STEP 2
PARTS
4
23
23
11
11
10
2
8
8
Remove the Metal
Posts (#3) and set it
aside for later
assembly.
NOTE
Open the Metal
U-Legs (#11) and
push up hinge to align
the support bar to lock in
as shown and attach
the 4 Leg Levelers (#4).
2
x4
4
x8
8
x8
10
x4
11
x4
Attach the Support
Bars (#2) to the leg
folding hinge as
shown using two
6mm Bolts (#8).
x8
Attach Leg Leveler
Caps (#23) by screwing
them until snug.
23
Attach Plastic Clips
(#10) as shown.
CAUTION:
PINCH HAZARD! KEEP HANDS CLEAR.
ITEM#: 57004
2
For replacement parts:
Visit: www.franklinsports.com/57004
Email: replacementparts@franklinsports.com
Call: 1-800-225-8649
PARTS
STEP 3
7
NOTE
x4
7
Thread in the Support
Bolt (#7) downward so
the head of the bolt
touches the frame.
Remarks: it is
important to not over
tighten the Support
Bolt (#7) but to loosely
screw in the bolt at
this point.
NOTE
Support Bolt (#7) is used to level playing surface
once the table is flipped over.
support bolt
STEP 4: FLIP TABLE!
NOTE
Grab the table on the
end with the support
bar, lifting up, and
rolling the table on to
the angled legs.
Next tighten the
Support Bolt (#7) to
ensure a level playing
surface. It is important
to do this on level
ground.
7
STEP 5
PARTS
1
1
x2
3
x2
4
x8
5
x1
6
x4
9
x4
5
1
3
9
NOTE
6
4
3
Push Table Tops (#1)
together. Adjust the
Leg Levelers (#4) until
entire table is level.
Install Washers (#9)
on each threaded end
of the net Metal Posts
(#3). Insert the
threaded ends of the
net Metal Post into the
Table Top (#1). Secure
with Nuts (#6). Slide
Net (#5) over the posts.
Assembly is completed.
HOW DO YOU FOLD IT?
When you are ready to fold up and store away, simply follow the setup instructions in the reverse order.
YOU ARE NOW READY TO PLAY!
ITEM#: 57004
3
For replacement parts:
Visit: www.franklinsports.com/57004
Email: replacementparts@franklinsports.com
Call: 1-800-225-8649
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising