DESOLDERING STATION
www.jbctools.com
CS/CV
DESOLDERING STATION
CS / CV / DESOLDERING STATION
CONTROL UNIT
DS360-A
MICRO DESOLDERING IRON
ACCESORIES
CL6210 Brass Wool
S0331 Sponge
POWER CORD
MANUAL
w w w.jbctools.com
CS/CV
DESOLDERING STATION
2
MANUAL
INSTALLATION
CONTROL UNIT
DS360
DESOLDERING IRON
Equipotential
connection
Main switch
Power Cord Socket
USB connector to PC:
- Update station software
- Create graphs of the soldering
process
- Manage and monitor
parameters via PC
PART NAMES
Cable collector
Smart stand
Friendly display control
Tip cleanning system
Desoldering Pump
3
ADJUSTABLE STAND
CABLE COLLECTOR
4
CLEANNING OPTIONS
Full set of clean option: sponge, metal wool and brush
S0331 Sponge
S0354 Sponge
The smoothest cleaning method. The sponge has to be kept wet (not soaked) using distilled water.
CL6205 Inox Wool
CL6220 Brushes
Provides a deeper cleaning on the tip.
More agressive on the tip than the wool.
TAPPING
WIPING
Tap smoothly the cartridge on the wiper profile to
remove the excess of solder
Use the slots to wipe any posible particle sticked
on the tip
5
HEAT MANAGEMENT
Expected life
(hours)* 700
JBC stations intelligently manage the tool temperature
and it helps to extended the tip life:
600
500
400
300
200
100
0
Temp (ºC)
200
225
250
Sleep
Temp
Work mode: Lift tool from the stand and the tool tip
heats up to the selected temperature.
Sleep mode: When the tool is in the stand, the
temperature reduces (preset sleep temperature is
180ºC / 360ºF).
Hibernation mode: After longer periods of inactivity
(pre-set to 30 minutes), the power is cut off and the
tool cools down to room temperature.
Heat management increase tip life which reduces cost of ownership.
6
275
300
325
350
Working
Temp
375
400
425
450
CONTROL SCREEN
Selected temp. 3 5 0 o C
350 c
0
Tip temperature
Power 10%
% Instant power supplied to the tool
Decrease & move down
Access Menu
& Confirm Selection
Increase & move up
SETTINGS MENU
ORIGINAL PIN: 0105
Main menu
Station settings
1
2
3
4
Temp unit
Maximum temp
Minimum temp
Help text
5 Beep
6 Power limit
7 Change PIN
Back
Tool settings
Celsius
4000C
2000C
OFF
1 Fix one temp
----2 Temp levels set
OFF
3 Sleep delay
0 min
ON
130W
4 Sleep temp
1800C
5 Hibernation delay 30 min
6 Temp adjust
+ O OC
1
2
3
Exit
Reset settings
Station settings
Tool settings
4
5
Counters
Program version
Counters
1 Plugged hours
2 Working hours
3 Sleep hours
0
0
0
4 Hibernation hours
5 No tool hours
6 Sleep cycles
7 Desold cycles
0
0
0
0
Tool DS
Back
Tool DS
Back
7
TECHNICAL SPECIFICATIONS
-
-
-
-
-
-
-
-
-
-
-
Temperature selection from 180ºC to 450°C (±5%) (356-840 ºF)
Output Peak Power: 40W.
Safety transformer, mains separator and double isolation.
CS-2C / CV-2C 230V 50/60Hz. Input fuse: 1A Output: 23,5V.
CS-1C / CV-1C 120V 50/60Hz. Input fuse: 2A Output: 23,5V.
CS-9C / CV-9C 100V 50/60Hz. Input fuse: 2A Output: 23,5V.
Total weight of unit: 2.8 kg (6.2 lb)
Ambient operating temperature: 10-40 ºC (50-104 ºF)
Complies with CE standards on electrical safety, electromagnetic compatibility
and ESD protected housing “skin effect”.
RoHS compliant.
Equipotential connector and the tool tip are connected to station mains ground supply for ESD protection.
This product should not be
thrown in the garbage.
WARRANTY
JBC’s 2 years warranty guarantees this equipment against all manufacturing defects, covering the replacement of defective parts and
all necessary labour.
Warranty does not cover product wear due to use or mis-use.
In order for the warranty to be valid, equipment must be returned,
postage paid, to the dealer where it was purchased enclosing this
fully filled in, sheet.
SERIAL Nº
STAMP OF DEALER
www.jbctools.com
0012763-0213
DATE OF PURCHASE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising