ABLOY EL560 – Electromechanical Lock (72 mm Distance)

ABLOY EL560 – Electromechanical Lock (72 mm Distance)
Electric Locks and Fittings
Self-Locking Electromechanical Locks
TECHNICAL DETAILS
ABLOY EL560 – Electromechanical
Lock (72 mm Distance)
Operating voltage:
12 – 24 V DC (-10 %, +15 %)
Current:
Nominal 0,13 A (12 V), 0,065 A (24 V)
Max. 0,4 A
Monitoring outputs:
a) bolt in
b) bolt out
c) key cylinder used/free
d) handle down/free
e) door open/closed
Operating temperature range:
-20° C – +60° C
Bolt throw:
20 mm
Backset:
standard: 55 mm
optional: 60, 65, 80 a 100 mm
Forend:
standard: 20 mm
optional: 24 mm
Spindle:
9 mm, (8 mm with snap spindle adapter)
Finish:
stainless steel forend
Cylinder:
DIN – Europrofile
Security fittings:
DIN, handle-handle – distance 72 mm
Delivery includes:
lock case, fixing screws, 9-to-8 mm
adapters and manual
ABLOY EL560 – Self-locking electromechanical wide lock
Application
• For both interior and exterior solid doors.
• The handle can be controlled by means of a proximity card reader output contact,
keypad, button etc.
• Split handle spindle – optional inside/outside handle function.
• Intended for entrance, emergency exit, fire and corridor doors – selectable function,
see„Lock Setting Possibilities“.
• Can be used in fire resistant doors – „fail-safe“ mode – in the case of power failure
the lock becomes unlocked (door can be opened from both sides).
• Safety class 3 – Trezor Test, security level “Secret” – NBÚ.
Benefits
• Left or right – double action latch bolt.
• Self-locking – when the door closes, the dead bolt throws out automatically.
• Secured locking – in the locked state the dead bolt is thrown out and the latch bolt
is blocked – the lock is secured in two points.
• Unified operating voltage 12 – 24 V DC.
• Low idle power consumption – 130 mA at 12 V DC, 65 mA at 24 V DC.
• Lock monitoring ability – see Monitoring outputs in Technical Details section.
Standards
•
•
•
•
•
– Burglar resistance
– Emergency exit
– Panic exit
– Fire resistant doors
– Building hardware. Locks and latches.
Mechanically operated locks, latches and locking plates
• STN P ENV 1627:2001 – Burglar resistance
A-8
EN 1627
EN 179
EN 1125
EN 1634-1
STN EN 12209:2004
Electric Locks and Fittings
Self-Locking Electromechanical Locks
Lock Functions
• When the door closes, the lock becomes locked automatically – the dead bolt throws out
and the latch bolt is blocked.
• When the controlled handle or panic handle is down, the dead bolt is withdrawn inside
the lock case and the latch bolt is released consequently.
• Mechanical opening using key cylinder is always possible from both sides and the lock
can be opened by inside handle (antipanic feature).
Lock Setting Possibilities – Access and Exit Control
“0” – fail secure
The lock can be always opened by inside (exit-side) handle (antipanic), the outside handle is
operational when the power from the control device, such as a card reader, is on.
“1” – fail safe – function EPS
The lock can be always opened by inside (exit-side) handle (antipanic), the outside handle is
operational when the power from the control device, such as a card reader, is off.
“2” – fail secure
Both handles are operational when the power from the control device, such as a card reader,
is on.
“3” – fail safe – function EPS
Both handles are operational when the power from the control device, such as a card reader,
is off.
• The required lock settings can be adjusted before installation. Adjusting controls are accessible
from the outside using Allen wrench, which is included in each lock delivery.
• Settings “1” and “3” are used in fire doors connected to EPS. When EPS signal is on, the door
is free to open. When the door fully closes, it becomes locked automatically.
Wiring Diagram
Connector pin-out
(cable-side view)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1 – gray
2 – yellow
3 – green
4 – turquoise
5 – brown
6 – white
7 – black
8 – pink
9 – green/brown
10 – orange
11 – blue
12 – violet
13 – yellow/red
14 – red
Note:
The security fittings IKON SX03 (handle-handle) are recommended. In connection with _SN EN 1125 the lateral panic fittings effeff 8000
are recommended, which are especially suitable for frame doors.
Accessories
Connector cables
Price €
Security fittings
Price €
EA218 (6 m)
SX03 (HANDLE-HANDLE)
EA219 (10 m)
effeff 8000 – panic fittings effeff
p. 110
Strike plate
Price €
Lead covers
Price €
EA280 (230 mm)
EA321-EA324
EA281 (450 mm)
Spindle
8812 (330 mm)
9 mm – split
Proximity card reader
Price €
HID EntryProx 4045
p. 136
Price €
A-9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising