AN/PRC-152(C) System Guide Brochure
AN/PRC-152(C)
System Guide
System
Components
AN/PRC-152
Type-1 SCA 30–512 MHz multiband handheld
The AN/PRC-152 multiband handheld
provides the warfighter with the security
and flexibility necessary in a multimission environment. With its JTRS-certified
SCA operating environment and Sierra™
II programmable crypto, the AN/PRC-152
not only supports today’s tactical radio
requirements, but is easily upgradeable
to future JTRS technology. In combination with the Handheld Power Amplifier
(HPA), the AN/PRC-152 can be configured
into a variety of vehicular, base station,
and repeater configurations, providing
high power solutions in addition to
dismounted pull-and-go capabilities.
SINCGARS
SINCGARS, VULOS, HAVEQUICK I/II, HPW,
MIL-STD-188-181B SATCOM
Optional internal GPS
Handheld Power Amplifier
Power amplifier for AN/PRC-152
50 W VHF, optional 20 W UHF and 50 W
SATCOM
Integrated battery charger
Pull-and-go capable
Separate VHF and UHF antenna ports with
automatic switching
20–32 Vdc input
Vehicle Systems
AN/PRC-152 SINCGARS vehicle systems
are specifically designed to be integrated
with the standard SINCGARS shock mount
(MT-6532/VRC) using the Harris SINCGARS Interface Module (SIM). This allows
for existing infrastructure to be upgraded
with the latest AN/PRC-152 based technology. By utilizing the mounting developed for the AN/PRC-119 and related
systems, AN/PRC-152 SINCGARS vehicle
systems are capable of integration with a
wide variety of related peripherals.
Part Number
SierraTM II programmable crypto
Radios Included
Key features and options include:
Seamless integration into the MT-6352/
VRC mount
Integrated speaker support for the
LS-671 speaker and VIC-1 and VIC-3
intercoms
Single and dual system options
UHF PA options
Available KDU remote control
Systems available with or without
AN/PRC-152(V)1(C) radios
Single or Dual
UHF PA
RF-300M-HV003
No
Single
0
RF-300M-HV004
No
Dual
0
RF-300M-HV006
No
Dual
1 of 2
RF-300M-HV007
No
Dual
2
RF-300M-HV101
Yes
Single
0
RF-300M-HV201
Yes
Dual
0
RF-300M-HV202
Yes
Dual
1 of 2
RF-300M-HV203
Yes
Dual
2
SINCGARS solutions like the AN/VRC-110
shown above provide high power 50 W
vehicular communications with the
flexibility for multiband and dismounted
operations.
Single Vehicle Systems
Designed to support a variety of system
scenarios and qualified to military specification requirements, the Harris Vehicular
Interface Mount (VIM) allows for flexible
single system installs of the AN/PRC-152
and Handheld Power Amplifier. Providing both easy interfacing to external
power and speaker solutions and a shock
mount, VIM-based installations provide
a ruggedized platform for deployment in
the most demanding of environments.
Key features and options include:
Integrated shock mount
Integrated power interface supporting
20–32 Vdc
Integrated speaker support for the
LS-671 speaker and VIC-1 and VIC-3
intercoms
Operational temperature range of
–30°C to +60°C
Qualified to MIL-STD-810F
Available UHF PA option
Available KDU remote control
Part Number
AN/PRC-152(V)1(C) Included
UHF PA
RF-300M-HV005
RF-300M-HV008
No
No
No
Yes
RF-300M-HV102
Yes
No
RF-300M-HV103
Yes
Yes
The RF-300M-HV 102 provides
power amplification, battery
charging, and a shock mount—
all in a compact package.
Base Station Repeater Systems
When fielded as a base station, the AN/PRC-152 provides the ideal
combination of range, power, and pull-and-go versatility. Able to be
run from a wide variety of military and civilian AC and DC power inputs,
systems can be paired with ruggedized transit cases to allow quick and secure
system installation and movement. Base station configurations can easily be
configured into repeater setups with the addition of another radio and
Handheld Power Amplifier.
Using a suite of battle proven system components, Harris can
configure AN/PRC-152 based systems to fit a wide variety of needs.
Key features and options include:
Flexible power inputs, with 12–32 Vdc and 115 or
230 Vac at 47–400 Hz inputs supported
Integrated speaker support for the
LS-671 speaker, with optional speakers available
Optional ruggedized transit cases
Optional UHF PA
Available in repeater configurations
Transit case base station systems allow for portability in the most demanding of environments.
System
Accessories
A small sample of available accessories is shown below.
Contact your Harris sales representative for further choices.
10075-1399 Lightweight Handset
The 10075-1399 is a high grade, lightweight military-grade handset for use with the Harris tactical radio systems. One handset is supplied with each Falcon® II and Falcon® III series transceiver systems. It is modified to
provide improved operator RF protection. Cable has U-229B/U connector.
RF-3020-HS002 Lightweight Headset
The RF-3020-HS002 headset is a lightweight tactical headset consisting of a single earphone in an ear cup and
a noise-cancelling microphone on an adjustable gooseneck boom. It is worn on the head using an adjustable
cloth web and straps. The RF-3020-HS002 has two Push-to-Talk (PTT) switches: one PTT is a typically chestmounted switch with clothing clip for attachment. The second PTT is a silent Push-to-Talk switch (sniper switch)
typically worn on the palm. The RF-3020-HS002 is submersible to 1 meter and is designed to meet tactical
environmental requirements. It has a standard U-229/329 audio connector compatible with the Falcon II and
Falcon III families of radios.
RF-5980-SA001 Tactical Amplifier/Speaker
Amplifies transceiver audio output for vehicular and base-station applications. The speaker features include:
Dual six-pin handset/headset connectors, individual handset/headset and speaker volume controls
Individual handset/headset and speaker power switches
Vehicular mounting bolt and bracket
Ruggedized for operation in extreme environments per MIL-STD-810F
RF-5941-SM903 Multiband Antenna Mast System
The RF-5941-SM903 is a sectional fiberglass 9 m multiband 30 to 512 MHz antenna/mast system that may be
assembled to create either a 7 m or 9 m mast with a 30 to 512 MHz multiband antenna. The system comes
complete with a 30–512 MHz multiband antenna, guying, ground stakes, storage bag, coaxial cable on winder
(BNC), and hammer.
The RF-390-AT001 Multiband Vehicular Whip Antenna
The RF-390-AT001 multiband vehicular whip antenna is a two-piece sectional vertical whip for use from 30 to
512 MHz. Exceptional bandwidth is obtained from distributive passive components along the antenna’s length.
The RF-390-AT001 has equivalent gain to other narrowband antennas. This antenna is the ideal choice for multiband radios because it reduces the vertical signature by replacing three narrowband antennas with a single
antenna.The antenna comes with single or dual ports and can be paired with the RF-392-AT001 tripod base for
fixed site installations.
KDU Remote Control
Available for any configuration of the Handheld Power Amplifier, the widely fielded Harris Keypad Display
Unit (KDU) can be configured as a remote control. Using menu screens identical to the AN/PRC-152 radio, the
remote control allows full control while in system configuration. The KDU remote control kit consists of a KDU,
6 ft cable, and cable adapter (shown attached to an RF-300M-HV008).
Special thanks to the U.S. Military Defense Websites for providing images of our troops used in this brochure.
RF Communications Division | 1680 University Avenue | Rochester, NY USA 14610
585-244-5830 | www.rfcomm.harris.com
Copyright © 2007 Harris Corporation 06/07 VPB/JF B2209A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement