TC16 spec sheet - Equipment

TC16 spec sheet - Equipment
TC16
MINI EXCAVATOR
Specifications
Features
Operating weight
3,800 lbs (1,725 kg)
Short-tail machine
Engine power
18 HP (13.2 kW)
Extra-wide blade for dozer applications
3
Bucket capacity
0.74-3.2 ft (21-91 l)
Top-mounted boom cylinders for perfect protection of cylin-
Dig depth
7' 3" (2.2 m)
ders and larger range of application
Reach
12' 10" (3.9 m)
Comfort cab with perfect all-round visibility
Knickmatik® allows for working closely alongside walls
Wide range of proven working tools
SPECIFICATIONS
OPERATING DATA, STANDARD EQUIPMENT
3,635 lbs (1,650 kg)
3,800 lbs (1,725 kg)
8' 2" (2,500 mm).
12' 6" / 12' 2"* 3,800 (3,720* mm)
7' 10" (2,390 mm).
3' 3" (990 mm)
3' 8" (1,130 mm)
4' 1" (1,240 mm)
7' 9"/ 8' 2" (2,370 / 2,500 mm)
6.7" (170 mm)
3,237 lbf (14,400 N)
2,091 (1,866* lbf) / 9,300 (8,300* N)
3.6 psi (0.25 daN/cm2)
3.7 psi (0.26 daN/cm2)
ENGINE
Manufacturer, model
Type
Combustion
Displacement
Net power rating at 2,400 rpm (SAE J 1349)
Max. torque
Cooling system
Mitsubishi, L3E
3-cylinder diesel engine, EPA/Tier 4 Final
4-stroke, swirl chamber injection
58 in3 (952 cm3)
18 hp (13.2 kW)
38.7 lbf ft (52.5 Nm) @ 2,400 rpm
Water
ELECTRICAL SYSTEM
Nominal voltage
Battery
Generator
Starter
12 V
12 V / 74 Ah
12 V / 40 A
12 V / (2.3 hp) 1.7 kW
TRANSMISSION
Single-stage hydrostatic travel drive with axial piston variable displacement motor and reduction gear,
fully enclosed. “Straight-Travel” function. Brake valve for downhill drive.
Travel speed, forward and reverse
1.4 mph (0-2.2 kph)
Gradeability
max. 60 %
Drawbar pull
2,610 lbf (1,160 daN)
UNDERCARRIAGE
Maintenance-free crawler-type undercarriage. Idler suspension with hydraulic crawler track tensioning.
Mechanically retractable/extendable undercarriage provided as standard.
Range of adjustment, outside edge of crawler chains
3' 3-4' 5" (990-1,340 mm)
Width rubber crawlers / steel crawlers
9" (230 mm)
Total length (sprocket - idler)
44.5" (1,130 mm)
Total length (undercarriage)
58.7" (1,490 mm)
DOZER BLADE
Independent of drive train, sensitive control via separate hand lever.
Width x height
Dozer cut below ground
Dozer lift above ground
Slope angle
4' 5" x 9" (1,340 x 235) mm
6.3" (160 mm)
8" (200 mm)
25°
STEERING
Independent, individual control of crawler chains, also counterwise. Sensitive control via hand levers
combined with foot pedals. Pedal console serving as foot rest.
SWING SYSTEM
Hydrostatic drive, also acts as wear-restistant brake. Additional spring-loaded multi-disc brake.
Internally toothed ring gear.
Swing speed
0-10 rpm
KNICKMATIK®
Lateral parallel adjustment of boom arrangement at full digging depth.
Angle of articulation / lateral adjustment left
Angle of articulation / lateral adjustment right
60° / 15" (370 mm)
60° / 20" (510 mm)
FLUID CAPACITIES
Fuel tank
Hydraulic system (incl. tank 6.6 gal (25 l))
8 gal (30 l)
9 gal (35 l)
HYDRAULIC SYSTEM
Pump capacity
7.7 + 5.0 gpm (29 + 19 l/min)
Working pressure
2,395 psi (165 bar)
Working hydraulics: Dual fixed displacement pump with power switch. Load-independent flow division
(LUDV) for all work functions and travel drive. Simultaneous independent control of all movements.
Tank-immersed return filter, full flow filtration. Hydraulic oil radiator provided as standard. Boom, dipperstick and articulated cylinders with end-positioning damping on both sides, bucket retract function
with one-side end-position damping.
Open return (Option). All functions can be activated proportionally. Two servo-assisted joystick controls
for excavator operations. Shut-off of all functions when operator dismounts from machine.
Control circuit for work attachments (Option):
Diagram shows P/Q provided on couplers
40
30
Quantity (Q) l/min
Transport weight (incl. bucket)
Operating weight acc. to ISO 6016 (incl. operator)
Total length (travel position)
Total length (trailer transport position)
Total height (travel position)
Width (crawlers retracted)
Uppercarriage tailswing
Uppercarriage frontswing
Working envelope 180° / 360°
Ground Clearance
Bucket digging force (ISO 6015)
Stick digging force (ISO 6015)
Ground pressure (rubber crawlers)
Ground pressure (steel crawlers)
20
10
0
0
20
40
60
80
100
120
140
160
180
Pressure (P) bar
CAB
Spacious, sound-insulated full-vision steel cab ROPS (acc. to ISO 12117), FOPS** (acc. to ISO 3449)
and TOPS (acc. to ISO 12117) certified. Two equally large doors. Safety glass windows, thermo
windows tinted in green. Skylight thermo window, bronze tinted. Panoramic rear window. Front window
supported by pneumatic springs, lockable for ventilation and slidable under cab roof. Windshield
washer system. Storage compartment. Preparation for radio installation. Left-hand outside rear-view
mirror.
Cab heating with windshield defroster through coolant heat exchanger and 2-speed fan, ventilating
mode in summer.
Fabric-covered operator's seat FSP010 with lap belt.
Instrument panel on the right hand side of the operator's seat with visual & acoustic warning device,
hour-meter, instrument cluster with large fuel gauge.
Working flood lights Halogen H-3.
93 dB (A)
Noise emission ambience LWA
78 dB (A)
Noise emission cab LpA
Measured in dynamic measuring cycle acc. to EC-directive 2000/14/EC.
*with dipperstick 1300 mm (optional)
**FOPS-approved only with skylight guard (optional)
7' 10" (2,390)
7' 7" (2,300)
3' 6" (1,060)
7' 6" (2,290)
8' 0" (2,430)
5' 6" (1,670)
4' 0" (1,220)
9' 9" (2,960)
9' 3" (2,830)
6' 2" (1,870)
11' 4" (3,460)
11' 0" (3,350)
8' 11" (2,710)
7' 3" (2,200)
5' 7" (1,700)
9' 7" (2,910)
7' 10" (2,400)
6' 4" (1,920)
5' 11" (1,820)
9' 7" (2,930)
6' 8" (2,040)
TC16
25°
10' 3" (3,130)
WORKING RANGES & DIMENSIONS: MONOBLOC BOOM
12' 8" (3,860)
12' 9" (3,900)
13' 3" (4,050)
13' 5" (4,085)
Dipperstick 3' 7" (1,100 mm)
Dipperstick 4' 3" (1,300 mm)
LIFTING CAPACITIES
Bucket hinge height
Dipperstick 3' 7" (1,100 mm)
6' 7"
(2.0 m)
3' 3"
(1.0 m)
0m
-2' 6"
(-0.75 m)
S
T
S
T
S
T
S
T
Bucket hinge height
Dipperstick 4' 3" (1,300 mm)
6' 7"
(2.0 m)
S
3' 3"
(1.0 m)
S
0m
S
-2' 6"
(-0.75 m)
S
T
T
T
T
4' 11" (1.5 m)
UE
UR
End
Side
End
Side
1.96 (0.89) 1.74 (0.79) 1.96 (0.89) 1.52 (0.69)
1.2 (0.54) 1.7 (0.77) 1.2 (0.54) 1.32 (0.60)
2.03 (0.92) 1.56 (0.71) 2.03 (0.92) 1.08 (0.49)
1.3 (0.59) 1.52 (0.69) 1.3 (0.59) .90 (0.41)
1.41 (0.64) 1.34 (0.61) 1.41 (0.64) .93 (0.42)
1.1 (0.50) 1.34 (0.61) 1.1 (0.50) .82 (0.37)
Load radius from center of ring gear
6' 7" (2.0 m)
8" 2" (2.5 m)
UE
UR
UE
UR
End
Side
End
Side
End
Side
End
Side
1.23 (0.56) 1.04 (0.47) 1.23 (0.56) .82 (0.37) 1.19 (0.54) .84 (0.38) 1.19 (0.54) .64 (0.29)
.84 (0.38) 1.01 (0.46) .84 (0.38) .70 (0.32) .75 (0.34) .82 (0.37) .75 (0.34) .53 (0.24)
1.54 (0.70) 1.1 (0.50) 1.54 (0.70) .86 (0.39) 1.23 (0.56) .82 (0.37) 1.23 (0.56) .60 (0.27)
.84 (0.38) 1.08 (0.49) .84 (0.38) .70 (0.32) .62 (0.28) .79 (0.36) .62 (0.28) .51 (0.23)
1.41 (0.64) 1.04 (0.47) 1.41 (0.64) .73 (0.33) .97 (0.44) .77 (0.35) .97 (0.44) .55 (0.25)
.75 (0.34) 1.01 (0.46) .75 (0.34) .62 (0.28) .51 (0.23) .75 (0.34) .51 (0.23) .46 (0.21)
1.01 (0.46) 1.01 (0.46) 1.01 (0.46) .68 (0.31) .73 (0.33) .73 (0.33) .73 (0.33) .53 (0.24)
.64 (0.29) 1.01 (0.46) .64 (0.29) ) .60 (0.27) .51 (0.23) .73 (0.33) .51 (0.23) .44 (0.20)
9' 10" (3.0 m)
UE
UR
End
Side
End
Side
.77 (0.35) .71 (0.32) .77 (0.35) .46 (0.21)
.42 (0.19) .66 (0.30) .42 (0.19) .42 (0.19)
.68 (0.31) .68 (0.31) .68 (0.31) .44 (0.20)
.40 (0.18) .64 (0.29) .40 (0.18) .40 (0.18)
.49 (0.22) .66 (0.30) .49 (0.22) .42 (0.19)
.42 (0.17) .62 (0.28) .42 (0.17) .42 (0.17)
4' 11" (1.5 m)
UE
UR
End
Side
End
Side
2.18 (0.99) 1.72 (0.78) 2.18 (0.99) 1.17 (0.53)
1.28 (0.58) 1.65 (0.75) 1.28 (0.58) .99 (0.45)
1.5 (0.68) 1.7 (0.77) 1.5 (0.68) 1.1 (0.50)
1.1 (0.50) 1.63 (0.74) 1.1 (0.50) 1.03 (0.47)
Load radius from center of ring gear
6' 7" (2.0 m)
8" 2" (2.5 m)
UE
UR
UE
UR
End
Side
End
Side
End
Side
End
Side
.99 (0.45) 1.01 (0.46) .99 (0.45) .64 (0.29)
.66(0.30) .99 (0.45) .66(0.30) .60 (0.27)
1.41 (0.64) 1.34 (0.61) 1.41 (0.64) .97 (0.44) .88 (0.40) .86 (0.39) .88 (0.40) .62 (0.28)
.88 (0.40) 1.34 (0.61) .88 (0.40) .79 (0.36) .62 (0.28) .86 (0.39) .62 (0.28) .57 (0.26)
1.34 (0.61) 1.17 (0.53) 1.34 (0.61) .79 (0.36) .97 (0.44) .82(0.37) .97 (0.44) .60 (0.27)
.79 (0.36) 1.1 (0.50) .79 (0.36) .71 (0.32) .57 (0.26) .82(0.37) .57 (0.26) .53 (0.24)
1.08 (0.49) 1.12 (0.51) 1.08 (0.49) .75 (0.34) .77 (0.35 .82(0.37) .77 (0.35 .55 (0.25)
.77 (0.35) 1.12 (0.51) .77 (0.35) .66 (0.30) .64 (0.29) .82(0.37) .64 (0.29) .51 (0.23)
9' 10" (3.0 m)
UE
UR
End
Side
End
Side
.77 (0.35) .71 (0.32) .77 (0.35) .49 (0.22)
.46 (0.21) .66 (0.30) .46 (0.21) .46 (0.21)
.77 (0.35) .71 (0.32) .77 (0.35) .46 (0.21)
.51 (0.23) .66 (0.30) .51 (0.23) .42 (0.19)
.71 (0.32) .69 (0.31) .71 (0.32) .44 (0.20)
.46 (0.21) .64 (0.29) .46 (0.21) .40 (0.18)
.55 (0.25) .66 (0.30) .55 (0.25) .42 (0.19)
.44 (0.20) .62 (0.28) .44 (0.20) .37 (0.17)
The above loads (all values in lbs x 1,000 resp. metric tons) are in compliance with SAE J 1097. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. All values were determined with
quick-attach system but without bucket. In case of mounted-on work attachments, the deadweights of the work attachments must be deducted from the permissible payloads.
Working equipment: Rubber crawlers.
Abbreviations: UE = Undercarriage extended, UR = Undercarriage retracted, S = Supported by blade, T = Traveling
Max. height loading position
60°
4' 5" (1,340)
7' 9" (2,370)
8' 2" (2,500)
Bucket heaped
15" 370 20" 510
Work equipment:
Monobloc boom with dipperstick 1100 mm
60°
DIMENSIONS
WORK ATTACHMENTS
BUCKETS
GRABS
10" (250 mm wide, capacity .85 ft3 (24 l)
9" (220 mm wide, capacity .74 ft3 (21 l)
12" (300 mm wide, capacity 1.06 ft3 (30 l)
12” (300 mm wide, capacity 1.03 ft3 (29 l)
16" (400 mm wide, capacity 1.55 ft3 (44 l)
16" (400 mm wide, capacity 1.41 ft3 (40 l)
20" (500 mm wide, capacity 1.94 ft3 (55 l)
24" (600 mm wide, capacity 2.5 ft3 (71 l)
24” (600 mm wide, capacity 2.15 ft3 (61 l)
39" (1,000 mm wide, capacity 3.21 ft3 (91 l)
47" (1,000 mm wide, capacity 3.0 ft3 (85 l)
39" (850 mm wide, capacity 2.15 ft3 (61 l)
39" (1,000 mm wide, capacity 1.98 ft3 (56 l)
Bucket, QAS
Bucket, directly mounted
Bucket, QAS
Bucket, directly mounted
Bucket, QAS
Bucket, directly mounted
Bucket, QAS
Bucket, QAS
Bucket, directly mounted
Ditch-cleaning bucket, QAS
Ditch-cleaning bucket, directly mounted
Swing bucket, QAS
Swing bucket, directly mounted
Clamshell grab GL 1250, grab swing brake
Ejector
set of shells 10" (250 mm) wide, capacity 1.77 ft3 (45 l)
OTHER WORK ATTACHMENTS
Hydraulic hammer
Auger
Bolt-on load hook for bucket rod
Cutting unit
Quick-change adapter for hydraulic hammer
Further work attachments available on request
OPTIONAL EQUIPMENT
BOOM OPTIONS
CAB
Monobloc boom, with extended dipperstick 51" (1,300 mm)
CRAWLER CHAIN OPTIONS
Steel crawler chain, 9" (230 mm) wide
HYDRAULIC SYSTEM
Terex 'Fingertip' control (electro proportional) for
additional control circuit for work attachments on
right joystick, actuation via rollers
Hose-rupture / load-retaining valve for boom with
load warning device
Hose-rupture / load-retaining valve for dipperstick
Terex 'Fingertip' control (electro proportional) incl.
second additional control circuit on left joystick,
actuation via rollers
Second additional control circuit (e.g. for sorting
grab), foot pedal
Biodegradable hydraulic oil / ester-based HLP 68
(Panolin)
Open return
DRIVER’S STAND
Rain guard
Cab-mounted working floodlight, front right
Boom-mounted working floodlight
Anti-theft device, coded key (immobilizer)
Yellow beacon
FOPS - skylight guard
Cab-mounted working floodlight, rear right
Radio set installation kit (speakers)
Electronic immobilizer, keypad operation
Motion alarm incl. horn
(to be deactivated on demand)
OTHER OPTIONAL EQUIPMENT
Mechanical quick-attach system (QAS)
Quick-attach system, mechanical
(genuine Lehnhoff system), type MS01
Crane lifting beam
Additional boom-mounted working floodlight
Rear vandal guard
High-speed 0-4.5 kph
Canopy with working floodlight
(weight reduction: 176 lbs (80 kg))
Special coating / adhesive films
Front dozer blade - extra-long version
Further optional equipment available on request
Fabric-covered operator's seat MSG 20 (standard version), lap belt, adjustable driver's weight
www.terex.com/construction
Effective Date: February 2011. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this
document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the
appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to
our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products
and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are
reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2015 Terex Corporation. (R7_180215)
TC16 2.5K 0215C Part No. 109282
Terex Construction 8800 Rostin Road, Southaven, MS 38671 USA
Tel +1 (888) 90-TEREX www.terex.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising