TK-690/790/890 - United Radio Service

TK-690/790/890 - United Radio Service
Jun-05
Last Revised: 06/01/05
Land-Mobile Price List
TK-690/790/890
Public Safety / Service Mobile Radios
Model
Description
%start models
TK-690HBK
TK-690HBK2
TK-690HBK3
List
$1,020.00
1,020.00
1,020.00
29.7-37.0 MHz, 110W, 160 Channels (R.F. DECK ONLY)
35.0-43.0 MHz, 110W, 160 Channels (R.F. DECK ONLY)
40.0-50.0 MHz, 110W, 160 Channels (R.F. DECK ONLY)
Multi-Mode Versions
TK-790BK
TK-790BK2
TK-790HBK*
TK-790K*
TK-890BK*
TK-890BK2
TK-890BK3
TK-890HBK*
TK-890K
%end models
148-174 MHz, 45W, 160 Channels
(R.F. DECK ONLY)
136-156 MHz, 45W, 160 Channels
(R.F. DECK ONLY)
730.00
730.00
1,180.00
1,013.00
780.00
780.00
780.00
1,230.00
1,063.00
148-174 MHz, 110W, 160 Channels (R.F. DECK ONLY)
148-174 MHz, Basic Front("BMD"), 45W, 160 Channels
450-490 MHz, 40W, 160 Channels
(R.F. DECK ONLY)
480-512 MHz, 40W, 160 Channels
(R.F. DECK ONLY)
403-430 MHz, 40W, 160 Channels
(R.F. DECK ONLY)
450-480 MHz, 100/75W, 160 Channels
(R.F. DECK ONLY)
450-490 MHz, Basic Front ("BMD"), 40W, 160 Channels
* Most popular radios
90-SERIES MOBILE FEATURES:
General Features:
160 Channels
12.5 / 25 kHz Channel Spacing (per channel)
Dual Priority Scan
Flash ROM Memory
MIL-STD 810C, D & E
MIIL-Spec "Driven Rain" Control Head
Multiple Configurations:
Dash Mount
Single Head Remote
Dual Head Remote
Dual Band Remote
Dual Head & Dual Band Remote
Basic Control Head (KCH-10)
7 Programmable Keys
8 Alphanumeric LCD
Programmable Key Functions
Emergency
Channel Recall
Direct Channel Select
Home Channel Toggle
LCD Dimmer
Mobile Relay Repeat
Intercom
Operator Selectable Tone
FleetSync PTT ID*
Emergency Mode*
Continuous Call Alert**
Call Alert & Transpond**
Power On Text**
Two Tone Decode A-B, B-C & C-B**
External Speaker status backup**
Horn Alert status backup**
Timed Power Off – Ignition Sense On**
Universal Accessory Connector
Mobile Data Terminals
Mobile Computers
GPS AVL
Repeater Port
Remote Control Port
7 Programmable Input Ports
6 Programmable Output Ports
* Feature available with Version 2.0 radio
production; serial S/N 209xxxxx or later
** Feature available with Version 2.0 radio
production; serial S/N 303xxxxx or later
Full Featured Control Head (KCH-11)
13 Programmable Keys
14 Alphanumeric Dot Matrix LCD
Basic Control Head (KCH-10)
Full Featured Control Head (KCH-11)
Page 1 of 10
TK-690_790_890
Jun-05
Last Revised: 06/01/05
Accessory Configuration Sets
Single Band
(see pages 6 - 8 for more information)
Model
9BHD1
9BHDH1
9BHSH1
9BMD1
9BMDH1
9BMSH1
Description
KCH-10, KCT-23M2, KMB-9, KMC-27
KCH-10(x2), KRK-6DH, KCT-22M2(x2), KCT-23M4, KMB-9, KMC-27(x2)
KCH-10, KRK-5, KCT-22M2, KCT-23M4, KMB-9, KMC-27
KCH-10, KCT-23M, KMB-5, KMC-27
KCH-10(x2), KRK-6DH, KCT-22M2(x2), KCT-23M3, KMB-5, KMC-27(x2)
KCH-10, KRK-5, KCT-22M2, KCT-23M3, KMB-5, KMC-27
List
$311.00
956.00
537.00
283.00
925.00
506.00
Note: All KCH-10 / Basic Control Head configurations are shipped with the control heads 4W internal speaker
enabled. Order L-891 to enable the 13W external speaker output for KES-5 speaker use. This will disconnect the
control heads internal 4W speaker !
9FHD1
9FHDH1
9FHSH1
9FMD1
9FMDH1
9FMSH1
KCH-11, KCT-23M2, KMB-9, KMC-27, KES-5
KCH-11(x2), KRK-6DH, KCT-22M2(x2), KCT-23M4, KMB-9, KMC-27(x2), KES-5(x2)
KCH-11, KRK-5, KCT-22M2, KCT-23M4, KMB-9, KMC-27, KES-5
KCH-11, KCT-23M, KMB-5, KMC-27, KES-5
KCH-11(x2), KRK-6DH, KCT-22M2(x2), KCT-23M3, KMB-5, KMC-27(x2), KES-5(x2)
KCH-11, KRK-5, KCT-22M2, KCT-23M3, KMB-5, KMC-27, KES-5
450.00
1,234.00
676.00
422.00
1,203.00
645.00
Dual Band
(see page 9 for more information)
Model
9BHHDB
9BHMDB
9BMMDB
Description
KCH-10, KRK-7DB, KMC-27, KCT-22M2, KCT-23M4(x2), KMB-9(x2)
KCH-10, KRK-7DB, KMC-27, KCT-22M2, KCT-23M3, KCT-23M4, KMB-5, KMB-9
KCH-10, KRK-7DB, KMC-27, KCT-22M2, KCT-23M3(x2), KMB-5(x2)
List
725.00
694.00
663.00
Note: All KCH-10 / Basic Control Head configurations are shipped with the control heads 4W internal speaker
enabled. Order L-891 to enable the 13W external speaker output for KES-5 speaker use. This will disconnect the
control heads internal 4W speaker !
9FHHDB
9FHMDB
9FMMDB
KCH-11 KRK-7DB, KMC-27, KES-5, KCT-22M2, KCT-23M4(x2), KMB-9(x2)
KCH-11 KRK-7DB, KMC-27, KES-5, KCT-22M2, KCT-23M3, KCT-23M4, KMB-5, KMB-9
KCH-11 KRK-7DB, KMC-27, KES-5, KCT-22M2, KCT-23M3(x2), KMB-5(x2)
864.00
833.00
802.00
Dual Band Dual Head
(see page 10 for more information)
Model
9BBHH
9BBHM
9BBMM
9FFHH
9FFHM
9FFMM
Description
KCH-10(x2), KMC-27(x2), KRK-8DBH, KCT-22M2(x2), KCT-23M4(x2), KMB-9(x2)
KCH-10(x2), KMC-27(x2), KRK-8DBH, KCT-22M2(x2), KCT-23M3, KCT-23M4, KMB-5, KMB-9
KCH-10(x2), KMC-27(x2), KRK-8DBH, KCT-22M2(x2), KCT-23M3(x2), KMB-5(x2)
Note: All KCH-10 / Basic Control Head configurations are shipped with the control heads 4W internal speaker
enabled. Order L-891 to enable the 13W external speaker output for KES-5 speaker use. This will disconnect the
control heads internal 4W speaker !
KCH-11(x2), KMC-27(x2), KRK-8DBH, KCT-22M2(x2), KCT-23M4(x2), KMB-9(x2), KES-5(x2)
KCH-11(x2), KMC-27(x2), KRK-8DBH, KCT-22M2(x2), KCT-23M3, KCT-23M4, KMB-5, KMB-9, KES-5(x2)
KCH-11(x2), KMC-27(x2), KRK-8DBH, KCT-22M2(x2), KCT-23M3(x2), KMB-5(x2), KES-5(x2)
List
1,064.00
1,033.00
1,002.00
1,342.00
1,311.00
1,280.00
Definition of Configurations
9 = 90-series mobiles
B = Basic Front Panel
F = Full Featured Front Panel
H = High Powered
M = Medium Powered
DB = Dual Band Remote Mount
DH = Dual Head Remote Mount
SH = Single Head Remote Mount
D = Dash Mount
1 = Single Band
Example 1: 9BMDH1 = 90-series, Basic Front, Medium Powered, Dual Head Remote Mount, Single Band Radio
Example 2: 9FHHDB = 90-series, Full Featured Front, High Powered, High Powered, Dual Band
Example 3: 9BBHM = 90-series, Basic Front, Basic Front, High Powered, Medium Powered, Dual Band
Page 2 of 10
TK-690_790_890
Jun-05
Last Revised: 06/01/05
Accessories for 90-Series Mobile Radios
Model
%start accessories
CABLES
KCT-18
KCT-22M
KCT-22M2
KCT-22M3
KCT-23M
KCT-23M2
KCT-23M3
KCT-23M4
Description
Ignition sense cable
Control cable - 8 Feet
Control cable - 17 Feet (Standard accessory config. set cable)
Control cable (25 Feet)
DC Cable (35/45W Dash mount)
DC Cable (75/110W Dash mount)
DC Cable (35/45W Remote mount)
DC Cable (75/110W Remote mount)
List
$13.00
70.00
80.00
90.00
30.00
37.00
33.00
43.00
INSTALLATION ACCESSORIES
KCK-61
KLF-2
KMB-10
KMB-5
KMB-9
Auxiliary Adapter for 90-Series Mobiles (For AUX A, B, & C)
Line Filter (suppresses alternator whine, 25dB, 25A max)
Key Lock Adapter for use with KMB-5
Medium Power Mounting Bracket (35W/45W models)
High Power Mounting Bracket with built-in key lock (75W/110W models)
MICROPHONES AND SPEAKERS
External Speaker (40W max input)
KES-5
115.00
39.50
25.00
14.00
35.00
59.00
Note: All KCH-10 / Basic Control Head configurations are shipped with the control heads 4W internal speaker
enabled. Order L-891 to enable the 13W external speaker output for KES-5 speaker use. This will disconnect the
control heads internal 4W speaker !
KMC-27
KMC-28
KMC-9B
Rugged standard microphone with noise canceling, MIL-STD and driven rain features
DTMF microphone (MIL-SPEC, Noise canceling)
Desk top microphone
MISCELLANEOUS ITEMS
Basic Control Panel
KCH-10
99.00
155.00
92.00
140.00
Note: All KCH-10 / Basic Control Head configurations are shipped with the control heads 4W internal speaker
enabled. Order L-891 to enable the 13W external speaker output for KES-5 speaker use. This will disconnect the
control heads internal 4W speaker !
KCH-11
KRK-5
KRK-6DH
KRK-7DB
KRK-8DBH
220.00
140.00
240.00
250.00
270.00
Full Featured Control Panel
Single Control Head Remote Mount Kit
Dual Control Head Remote Mount Kit
Dual Band Control Head Remote Mount Kit
Dual Band Dual Head Remote Mount Kit
SERVICE RELATED ACCESSORIES
Programming Interface Cable for TK-690/790/890 (requires KPG-44D)
KPG-43
90-Series Mobile Programming Software; Windows® 98/2000/Me/XP compatible
KPG-44D
*****************
K29-5276-03
K29-5277-03
K29-5305-03
S76-0434-05
N/A
65.00
Call Kenwood Parts at 800-367-7514 to order the following:
Key Inserts for 90-series mobile (AN, D/A, DIM, HA, HC, IC, MON, OPT, OST, PA)
Key Inserts for 90-series mobile (RCL, RPT, SCN, SP, SPM, SQ, TA, <up arrow>, <down arrow>)
Key Inserts for 90-series mobile (CH1, CH2, CH3, CH4, CH5, AUXA, AUXB, AUXC, EMG, ORG)
1 Amp Relay for 90-series mobile
14.00
14.00
14.00
11.22
Accessories for 90-Series Mobile Radios
Model
Description
List
QE-2 G-Star®/ MDC1200 DIGITAL ANI MODULES by Cimarron Technologies
How to Order: Please see QE-2 Information and Order Sheet available from LMR Order Desk
1. Select the proper model/ quantity of radios, desired MDC-1200 (L-901) or G-Star (L-902) ANI format labor code.
2. Refer to the "QE-2 MDC-1200 Information/Order Sheet" available from the LMR Order Desk; select the ID format, ID codes and other feature options
3. Fax the Order Sheet with your radio order to your authorized Kenwood Rep or LMR Order Desk
All order sheet items must be filled out even if the feature option is "disabled" (incomplete Order Sheets will not be processed).
a. QE-2's are Kenwood installed only; these are not available as "shipped loose" (pre-programmed or not).
b. Allow a min. 1 week delivery ARO for 1- 25 units (allow min. 3 weeks for 25 units and up).
Notes:
Emergency "Man-down" features require an installed CAE-3 internal man-down tilt switch option (portables only).
Dealers can purchase a QE-2 programmer , Model QPF-2, direct from Cimarrron Technologies Call 800-487-7184, website: www.cimtechcorp.com.
QE-2
G-Star® or MDC1200 ANI Board : PTT ANI, emergency & man-down
Important Factory Install Only –Order L-901 or L-902
Page 3 of 10
128.00
TK-690_790_890
Jun-05
Last Revised: 06/01/05
Installation / Tuning Charges for 90-Series Mobile Radios
Model
%start labor codes
L-846
L-847
L-848
L-849
L-850
L-854
L-858
L-859
L-861
L-8622
L8643, 4
L8653, 4
L8665
L-867
L-870
L-883
L-891
Description
Package Dash/Single Head Remote for 90-series mobiles
Package Dual Head Remote for 90-series mobiles
Package Dual Band Remote for 90-series mobiles
Package Dual Band Dual Head Remote for 90-series mobiles
Tune TK-890 receiver channel spread (20 MHz max.); specify receive spread (See Pg. 37)
Tune 90-series mobile
Modify 90-series mobile Single Band (Single Head) Mobile for Pyramid Vehicular Repeater
Modify 90-series mobile Single Band (Dual Head) Mobile for Pyramid Vehicular Repeater
Note: L-859 labor code was originally for Dual Head (Single Head) and has been changed to Dual Head (Single
Band). For more info. pls. see "Pyramid Instruction Guide r
Install Horn Alert output relay for 90-series mobiles (1 amp max.) --- Part #S76-0407-05 Relay incl.
Install Key Inserts for 90-series mobiles
KCT-22A Extended Control Head Cable (up to 50 ft. max.)4
KCT-22A Extended Control Head Cable (up to 100 ft. max.)4
KCT-23A-K2 Two Conductor 75/110W High Power DC Cable (2 Conductor: 1x23 ft. positive, 1x23 ft. negative; AWG
#10)
Jumper foil for SB to pin 14 of accessory connector for 90-series mobile (Ref. 90-Series Mobile Service Manual, page
17/18)
Simultaneous transpond and alert feature up-grade for 90-series mobiles & portables
Modify 90-series mobile for KCT-18
External speaker modification for 90-series mobile Control Head (13W)
Note: All KCH-10 / Basic Control Head configurations are shipped with the control heads 4W internal speaker enab
L-901
L-902
L-903
L-9106
L-912
L-917
Program and install QE-2 MDC1200 Encoder
L-921
L-922
Modify 90-series mobile Dual Band (Single Head) for Pyramid Vehicular Repeater
Program and install QE-2 G-Star® Encoder
R640 mic input modification for 90-series mobile
Install firmware 094F (90-series mobile * and # DTMF without PTT)
90-Series mobile low imp. mic. Input at RF deck
EXT PTT / Local KMC-27 mic disable
PURPOSE: Disables the KMC-27 mobile hand mic element when 90-series mobile external PTT is active. For use
with data modems, GPS AVL data units, headset systems (motorcycles, ambulance, fire engines), vehicle intercom
Modify 90-series mobile Dual Band (Dual Head) for Pyramid Vehicular Repeater
List
17.00
34.00
34.00
50.00
N/C
30.00
75.00
75.00
70.00
15.00
190.00
245.00
75.00
25.00
50.00
25.00
10.00
75.00
75.00
17.00
17.00
10.00
17.00
75.00
75.00
1
For KCK-6
---> Features: 90-Series AUX A, B, & C Inputs, 3 AUX 1 Amp Relay Outputs, D-Sub 25 90-Series Accessory Connector Parallel Feed Through
---> Supplied Items: Instruction Sheet (1pc.), KCK-6 (1pc.), Insulated Spade Lugs [0.250 female fully insulated, 16-14 wire range] (8pcs.)
***Hardware that may be required but NOT supplied - two 3/16" mounting screws, male-to-female DB-25 straight through serial cable, & wire peripheral.**
CAUTION: KCK-6 Relays are rated at 1A maximum. Do Not Exceed. The KCK-6 is not intended to directly drive siren and light packages. The siren/light package manufacturers recommended
high amperage relay units and directions should be followed.
2
For new radio tune orders only. Installs only the included KCH-10/11 key inserts. Must specify keys and placement (see Service Manuals for placement diagram, pg. 14). Also, see Service
Manuals for technical details (pg. 14). Other Key Inserts are available from Parts Dept. See the "Service Related Accessories" section of the 90-series mobiles pricepages for more information.
3
Please specify exact length at 1ft. increments when ordering.
4
Extended control head cables exhibit a loss in speaker audio power to the control heads. For either type control head (KCH-10/11), it is recommended that the 13W audio output modification be
implemented to drive extended cable runs and a KES-5 external speaker be used. Refer to the service manual pg. 15-17 for 13W modifications. Installing new radio firmware (hex files) via the
KPG-44D software nor checking the firmware "checksum" is not possible through an extended control head cable. A standard KCT-22 cable of 25 ft. or less should be used when this has to be
done. Normal KPG-44D radio parameter programming is possible at extended lengths.
5
This cable substitutes for the ff: DC Cables:
---> KCT-23M2 75/110W Dash Mount DC Cable:
4 Conductor: 2x10 ft. positive, 2x10 ft. negative
---> KCT-23M4 75/110W Remote Mount DC Cable: 4 Conductor: 2x23 ft. positive, 2x23 ft. negative
6
The firmware 094F gives the 90-series mobile the ability to generate a DTMF tone from the * and # keys without pushing the PTT button.
Page 4 of 10
TK-690_790_890
Jun-05
Last Revised: 06/01/05
90-Series Mobile Radios Configuration Sets - Single Band
(see page 2 for more information)
DASH MOUNT / MEDIUM POWER
Model
VHF HIGH BAND
TK-790K
Description
148-174 MHz, 45W, Basic front, 160 Channels (pre-packaged TK-790BK 9BMD1)
List
$1,013.00
Note: Pre-packaged & fully assembled: basic front, medium power, dash mount mobiles. No need to use the
assembly labor code L-846. If these versions are out of stock please order: "TK-790BK 9BMD1" and an L-846.
TK-790BK 9BMD1
TK-790BK2 9BMD1
TK-790BK 9FMD1
TK-790BK2 9FMD1
UHF
TK-890K
136-156 MHz, 45W, Full front, 160 Channels
1,013.00
1,013.00
1,152.00
1,152.00
450-490 MHz, 40W, Basic front, 160 Chan. (prepackaged TK-890BK 9BMD1)
1,063.00
148-174 MHz, 45W, Basic front, 160 Channels
136-156 MHz, 45W, Basic front, 160 Channels
148-174 MHz, 45W, Full front, 160 Channels
Note: Pre-packaged & fully assembled: basic front, medium power, dash mount mobiles. No need to use the
assembly labor code L-846. If these versions are out of stock please order: "TK-890BK 9BMD1" and an L-846.
TK-890BK 9BMD1
TK-890BK2 9BMD1
TK-890BK3 9BMD1
TK-890BK 9FMD1
TK-890BK2 9FMD1
TK-890BK3 9FMD1
1,063.00
1,063.00
1,063.00
1,202.00
1,202.00
1,202.00
450-490 MHz, 40W, Basic front, 160 Channels
480-512 MHz, 40W, Basic front, 160 Channels
403-430 MHz, 40W, Basic front, 160 Channels
450-490 MHz, 40W, Full front, 160 Alpha/Num Channels
480-512 MHz, 40W, Full front, 160 Alpha/Num Channels
403-430 MHz, 40W, Full front, 160 Alpha/Num Channels
Note: Order an L-846 for each model above if factory packaging is required
(except the TK-790K & TK-890K pre-packaged models).
DASH MOUNT / HIGH POWER
Model
VHF LOW BAND
TK-690HBK 9BHD1
TK-690HBK2 9BHD1
TK-690HBK3 9BHD1
TK-690HBK 9FHD1
TK-690HBK2 9FHD1
TK-690HBK3 9FHD1
Description
1,331.00
1,331.00
1,331.00
1,470.00
1,470.00
1,470.00
29.7-37.0 MHz, 110W, Basic front, 160 Channels
35.0-43.0 MHz, 110W, Basic front, 160 Channels
40.0-50.0 MHz, 110W, Basic front, 160 Channels
29.7-37.0 MHz, 110W, Full front, 160 Alpha/Num Channels
35.0-43.0 MHz, 110W, Full front, 160 Alpha/Num Channels
40.0-50.0 MHz, 110W, Full front, 160 Alpha/Num Channels
VHF HIGH BAND
TK-790HBK 9BHD1
TK-790HBK 9FHD1
148-174 MHz, 110W, Basic front, 160 Channels
UHF
TK-890HBK 9BHD1
TK-890HBK 9FHD1
450-480 MHz, 100/75W, Basic front, 160 Channels
List
1,491.00
1,630.00
148-174 MHz, 110W, Full front, 160 Alpha/Num Channels
450-480 MHz, 100/75W, Full front, 160 Alpha/Num Channels
1,541.00
1,680.00
Note: Order an L-846 for each model above if factory packaging is required.
Warning: High power decks may not be suitable for some dash mount installations. Please account for size, weight &
heat dissipation: Size-7.05" Wx2.36"Hx 12.97"D, Weight-8.36lbs
Page 5 of 10
TK-690_790_890
Jun-05
Last Revised: 06/01/05
90-Series Mobile Radios Configuration Sets - Single Band Cont'd…
(see page 2 for more information)
SINGLE HEAD REMOTE / MEDIUM POWER
Model
VHF HIGH BAND
TK-790BK 9BMSH1
TK-790BK2 9BMSH1
TK-790BK 9FMSH1
TK-790BK2 9FMSH1
UHF
TK-890BK 9BMSH1
TK-890BK2 9BMSH1
TK-890BK3 9BMSH1
TK-890BK 9FMSH1
TK-890BK2 9FMSH1
TK-890BK3 9FMSH1
Description
List
$1,236.00
1,236.00
1,375.00
1,375.00
148-174 MHz, 45W, Basic front, 160 Channels
136-156 MHz, 45W, Basic front, 160 Channels
148-174 MHz, 45W, Full front, 160 Alpha/Num Channels
136-156 MHz, 45W, Full front, 160 Channels
1,286.00
1,286.00
1,286.00
1,425.00
1,425.00
1,425.00
450-490 MHz, 40W, Basic front, 160 Channels
480-512 MHz, 40W, Basic front, 160 Channels
403-430 MHz, 40W, Basic front, 160 Channels
450-490 MHz, 40W, Full front, 160 Alpha/Num Channels
480-512 MHz, 40W, Full front, 160 Alpha/Num Channels
403-430 MHz, 40W, Full front, 160 Alpha/Num Channels
Note: Order an L-846 for each model above if factory packaging is required.
SINGLE HEAD REMOTE / HIGH POWER
Model
VHF LOW BAND
TK-690HBK 9BHSH1
TK-690HBK2 9BHSH1
TK-690HBK3 9BHSH1
TK-690HBK 9FHSH1
TK-690HBK2 9FHSH1
TK-690HBK3 9FHSH1
Description
1,557.00
1,557.00
1,557.00
1,696.00
1,696.00
1,696.00
29.7-37.0 MHz, 110W, Basic front, 160 Channels
35.0-43.0 MHz, 110W, Basic front, 160 Channels
40.0-50.0 MHz, 110W, Basic front, 160 Channels
29.7-37.0 MHz, 110W, Full front, 160 Alpha/Num Channels
35.0-43.0 MHz, 110W, Full front, 160 Alpha/Num Channels
40.0-50.0 MHz, 110W, Full front, 160 Alpha/Num Channels
VHF HIGH BAND
TK-790HBK 9BHSH1
TK-790HBK 9FHSH1
148-174 MHz, 110W, Basic front, 160 Channels
UHF
TK-890HBK 9BHSH1
TK-890HBK 9FHSH1
450-480 MHz, 100/75W, Basic front, 160 Channels
List
1,717.00
1,856.00
148-174 MHz, 110W, Full front, 160 Alpha/Num Channels
450-480 MHz, 100/75W, Full front, 160 Alpha/Num Channels
1,767.00
1,906.00
Note: Order an L-846 for each model above if factory packaging is required.
Page 6 of 10
TK-690_790_890
Jun-05
Last Revised: 06/01/05
90-Series Mobile Radios Configuration Sets - Single Band Cont'd…
(see page 2 for more information)
DUAL HEAD REMOTE / MEDIUM POWER
Model
VHF HIGH BAND
TK-790BK 9BMDH1
TK-790BK 9FMDH1
UHF
TK-890BK 9BMDH1
TK-890BK2 9BMDH1
TK-890BK3 9BMDH1
TK-890BK 9FMDH1
TK-890BK2 9FMDH1
TK-890BK3 9FMDH1
Description
List
$1,655.00
1,933.00
148-174 MHz, 45W, Basic fronts, 160 Channels
148-174 MHz, 45W, Full fronts, 160 Alpha/Num Channels
1,705.00
1,705.00
1,705.00
1,983.00
1,983.00
1,983.00
450-490 MHz, 40W, Basic fronts, 160 Channels
480-512 MHz, 40W, Basic fronts, 160 Channels
403-430 MHz, 40W, Basic fronts, 160 Channels
450-490 MHz, 40W, Full fronts, 160 Alpha/Num Channels
480-512 MHz, 40W, Full fronts, 160 Alpha/Num Channels
403-430 MHz, 40W, Full fronts, 160 Alpha/Num Channels
Note: Order an L-847 for each model above if factory packaging is required.
DUAL HEAD REMOTE / HIGH POWER
Model
VHF LOW BAND
TK-690HBK 9BHDH1
TK-690HBK2 9BHDH1
TK-690HBK3 9BHDH1
TK-690HBK 9FHDH1
TK-690HBK2 9FHDH1
TK-690HBK3 9FHDH1
Description
1,976.00
1,976.00
1,976.00
2,254.00
2,254.00
2,254.00
29.7-37.0 MHz, 110W, Basic fronts, 160 Channels
35.0-43.0 MHz, 110W, Basic fronts, 160 Channels
40.0-50.0 MHz, 110W, Basic fronts, 160 Channels
29.7-37.0 MHz, 110W, Full fronts, 160 Alpha/Num Channels
35.0-43.0 MHz, 110W, Full fronts, 160 Alpha/Num Channels
40.0-50.0 MHz, 110W, Full fronts, 160 Alpha/Num Channels
VHF HIGH BAND
TK-790HBK 9BHDH1
TK-790HBK 9FHDH1
148-174 MHz, 110W, Basic fronts, 160 Channels
UHF
TK-890HBK 9BHDH1
TK-890HBK 9FHDH1
450-480 MHz, 100/75W, Basic fronts, 160 Channels
List
2,136.00
2,414.00
148-174 MHz, 110W, Full fronts, 160 Alpha/Num Channel
450-480 MHz, 100/75W, Full fronts, 160 Alpha/Num Channels
2,186.00
2,464.00
Note: Order an L-847 for each model above if factory packaging is required.
Page 7 of 10
TK-690_790_890
Jun-05
Last Revised: 06/01/05
90-Series Mobile Radios Configuration Sets - Dual Band Remote Mounts
Dual Band Mobiles must be ordered in components. Follow the three (3) steps listed below:
(1) [Choose the RF DECKS]: RF Decks can both be the same power or can be mixed (i.e. medium & high power).
Adhere to the compatibility chart below:
TK-690
TK-790
TK-890
TK-690
X
O
O
TK-790
O
X
O
TK-890
O
O
X
O = Compatible
X = Not Compatible
MEDIUM POWER DECKS
Model
TK-790BK
TK-790BK2
TK-890BK
TK-890BK2
TK-890BK3
Description
List
$730.00
730.00
780.00
780.00
780.00
148-174 MHz, 45W, 160 Channels
136-156 MHz, 45W, 160 Channels
450-490 MHz, 40W, 160 Channels
480-512 MHz, 40W, 160 Channels
403-430 MHz, 40W, 160 Channels
Note: The TK-790BK2 band split, 136-156 MHz is for government/export only.
HIGH POWER DECKS
Model
TK-690HBK
TK-690HBK2
TK-690HBK3
TK-790HBK
TK-890HBK
Description
1,020.00
1,020.00
1,020.00
1,180.00
1,230.00
29.7-37.0 MHz, 110W, 160 Channels
35.0-43.0 MHz, 110W, 160 Channels
40.0-50.0 MHz, 110W, 160 Channels
148-174 MHz, 110W, 160 Channels
450-480 MHz, 100/75W, 160 Channels
(2) [Choose the Accessory Configuration Set]:
a. Choose one set to match the front panel type
B = Basic
F = Full Featured
Model
9BHHDB
9BHMDB
9BMMDB
9FHHDB
9FHMDB
9FMMDB
List
b. And, each RF deck power range
MM = Medium/Medium Power
HH = High/High Power
HM = High/Medium Power
DB = Dual Band
Description
List
725.00
694.00
663.00
864.00
833.00
802.00
KCH-10, KRK-7DB, KMC-27, KCT-22M2, KCT-23M4(x2), KMB-9(x2)
KCH-10, KRK-7DB, KMC-27, KCT-22M2, KCT-23M3, KCT-23M4, KMB-5, KMB-9
KCH-10, KRK-7DB, KMC-27, KCT-22M2, KCT-23M3(x2), KMB-5(x2)
KCH-11 KRK-7DB, KMC-27, KES-5, KCT-22M2, KCT-23M4(x2), KMB-9(x2)
KCH-11 KRK-7DB, KMC-27, KES-5, KCT-22M2, KCT-23M3, KCT-23M4, KMB-5, KMB-9
KCH-11 KRK-7DB, KMC-27, KES-5, KCT-22M2, KCT-23M3(x2), KMB-5(x2)
(3) [Optional]: Include the L-848 assembly labor code if factory packaging is required.
EXAMPLE ORDER
TK-790BK
TK-890BK2
9FMMDB
L-848
RF Deck #1
RF Deck #2
Accessory Set (90-Series, Full Feature Front, Medium/Medium Power, Dual Band)
Labor Code
Total
Page 8 of 10
730.00
780.00
802.00
34.00
2,346.00
TK-690_790_890
Jun-05
Last Revised: 06/01/05
90-Series Mobile Radios Configuration Sets - Dual Band Dual Head
Dual Band Dual Head Mobiles must be ordered in components. Follow the three (3) steps listed below:
(1) [Choose the RF DECKS]: RF Decks can both be the same power or can be mixed (i.e. medium & high power).
Adhere to the compatibility chart below:
TK-690
TK-790
TK-890
TK-690
X
O
O
TK-790
O
X
O
TK-890
O
O
X
O = Compatible
X = Not Compatible
MEDIUM POWER DECKS
Model
TK-790BK
TK-790BK2
TK-890BK
TK-890BK2
TK-890BK3
Description
List
$730.00
730.00
780.00
780.00
780.00
148-174 MHz, 45W, 160 Channels
136-156 MHz, 45W, 160 Channels
450-490 MHz, 40W, 160 Channels
480-512 MHz, 40W, 160 Channels
403-430 MHz, 40W, 160 Channels
Note: The TK-790BK2 band split, 136-156 MHz is for government/export only.
HIGH POWER DECKS
Model
TK-690HBK
TK-690HBK2
TK-690HBK3
TK-790HBK
TK-890HBK
Description
1,020.00
1,020.00
1,020.00
1,180.00
1,230.00
29.7-37.0 MHz, 110W, 32 Channels
35.0-43.0 MHz, 110W, 32 Channels
40.0-50.0 MHz, 110W, 32 Channels
148-174 MHz, 110W, 160 Channels
450-480 MHz, 100/75W, 160 Channels
(2) [Choose the Accessory Configuration Set]:
a. Choose one set to match the front panel type
BB = Basic/Basic
FF = Full/Full Featured
Model
9BBHH
9BBMM
9BBHM
9FFHH
9FFMM
9FFHM
List
b. And, each RF deck power range
MM = Medium/Medium Power
HH = High/High Power
HM = High/Medium Power
Description
List
1,064.00
1,002.00
1,033.00
1,342.00
1,280.00
1,311.00
KCH-10(x2), KMC-27(x2), KRK-8DBH, KCT-22M2(x2), KCT-23M4(x2), KMB-9(x2)
KCH-10(x2), KMC-27(x2), KRK-8DBH, KCT-22M2(x2), KCT-23M3(x2), KMB-5(x2)
KCH-10(x2), KMC-27(x2), KRK-8DBH, KCT-22M2(x2), KCT-23M3, KCT-23M4, KMB-5, KMB-9
KCH-11(x2), KMC-27(x2), KRK-8DBH, KCT-22M2(x2), KCT-23M4(x2), KMB-9(x2), KES-5(x2)
KCH-11(x2), KMC-27(x2), KRK-8DBH, KCT-22M2(x2), KCT-23M3(x2), KMB-5(x2), KES-5(x2)
KCH-11(x2), KMC-27(x2), KRK-8DBH, KCT-22M2(x2), KCT-23M3, KCT-23M4, KMB-5, KMB-9, KES-5(x2)
(3) [Optional]: Include the L-849 assembly labor code if factory packaging is required.
EXAMPLE ORDER
TK-790BK
TK-890BK2
9FFMM
L-849
RF Deck #1
RF Deck #2
Accessory Set (9 = 90-Series, FF = Full/Full Front, MM = Medium/Medium Power)
Labor Code
Total
Page 9 of 10
730.00
780.00
1,280.00
50.00
2,840.00
TK-690_790_890
Jun-05
Last Revised: 06/01/05
IMPORTANT TK-890 INFORMATION
TK-890 Receiver Channel Spread (20MHz)
The lowest receive channel spread range is the factory default tuning if not otherwise specified. Refer to the table below; order L-850 (no charge) and specify
receive spread at the time of ordering. Out of range orders cannot be accepted.
TK-890HBK Rated Transmit Power (100W / 75W)
The transmit power output is rated at 100 W from 450-470 MHz and 75W from 470-480 MHz. Radio power level automatically adjusts within these band ranges.
Model
RF Deck Freq. Range RX Ch. Spread TX Ch. Spread
TK-890BK/K
450-490
20 MHz
40 MHz
Remarks
Factory default
450-470
450-490
Order L-850, specify:
460-480
450-490
Red Dot Indicator *
Order L-850, specify:
470-490
450-490
Yellow Dot Indicator *
TK-890BK2
20 MHz
40 MHz
Factory default
480-500
480-512
Order L-850, specify:
492-512
480-512
TK-890BK3
480-512
20 MHz
40 MHz
Factory default
410-430
403-430
Order L-850, specify:
403-423
403-430
TK-890HBK
403-430
450-480
Red Dot Indicator *
Green Dot Indicator *
20 MHz
30 MHz
100 W: 450-470
Factory default
450-470
450-480
75 W: 470-480
Order L-850, specify:
460-480
450-480
Red Dot Indicator *
*Note: If Kenwood changes the factory default, a colored label as denoted on the "Remarks" column, will be placed on the outside
carton and on the radio itself to denote the frequency range to which it was tuned.
Page 10 of 10
TK-690_790_890
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising