TPI TPI 192 True RMS 50,000 Count Digital Multimeter with

TPI TPI 192 True RMS 50,000 Count Digital Multimeter with
190 Series 50,000 Count True RMS DMMs
190 Series General Specifications & Accessories
ACCESSORIES
CO, Combustion &
Combustibles
Refrigeration Leak
Detectors
Digital Manometers
Temperature
Instruments
IAQ: Air
Flow/Humidity
Digital Multimeters
& Clamp-on Meters
Test Products
International, Inc.
Headquarters:
9615 SW Allen Blvd.
Beaverton, OR 97005
USA
503-520-9197
Fax: 503-520-1225
email:
GENERAL SPECIFICATIONS
Weight:
530g
Operating Temp:
0°C to 45°C (-32°F to 113°F)
Storage Temp:
-20°C to 60°C (-40°F to 140°F)
Relative Humidity:
0% to 80%: (0°C to 35°C/32°F to 95°F)
0% to 70%: (45°C to 55°C/95°F to 131°F)
Temp Coefficient:
0.1x (Specified Accuracy) per °C for temperature <18°C to>28°C
Power Supply
9 Volt Alkaline Battery
Three Models
to Choose From
190
STANDARD ACCESSORIES
A190
Protective Boot
A085
UL Listed Silicone Test Lead Set with Alligator Clips (Screw On)
A104
0.5 Amp/600V UL Ceramic Fuse for 100 series DMMs (2 each)
A110
10 Amp/600V UL Ceramic Fuse for 100 series DMMs (2 each)
LIFE-
tilt stand on all 190 series DMMs
192
Electronic
OPTIONAL ACCESSORIES
A100
Carrying case
A191
RS232 cable & software for optically isolated IR port
A251
AC Clamp-On Accessory for DMMs
0-400 Amps
A254
Low Current AC/DC Adapter for DMMs 10 Amp range, 0.001 resolution
60 Amp range, 0.01 resolution
A256
AC/DC Clamp-on Accessory for DMMs 0.1 A resolution
A296
AC/DC Clamp-On Accessory for DMMs 0-1,000 Amps
A301
Temperature Adapter with GK11M and battery, 0.1°C or °F resolution
A620
500psi Pressure/Vacuum Adapter for DMMs
194
Electrical
Industrial
600V CAT IV
All 190 series DMMs come
with protective boot
and silicone rubber
(CAT IV 600V) test leads.
separate battery & fuse compartment
Features
Distributed by:
• Large 50,000 count display increases
resolution and improves accuracy
(1.7” x 2.75”, 43mm x 70mm)
info@tpi-thevalueleader.com
Test Products
International, Ltd.
342 Bronte St. South
Unit 9
Milton, Ontario L9T
5B7
Canada
905-693-8558
Fax: 905-693-0888
email:
• Triple Display shows more than one reading
simultaneously
• 51 Segment Analog Bar Graph to catch fast
AC fluctuations
• Back Light (LED Type) allows viewing in any
light condition
• Auto Range automatically selects
the best range for the measurement
info@tpicanada.com
• Separate battery and fuse compartment for
easy replacement
Test Products
International UK Ltd.
Longley House, East Park
Crawley, West Sussex
RH10 6AP England
Tel: +44 (0)1293 561212
Fax: +44 (0)1293813465
contactus@tpieurope.com
ITLIM
ED
Electrical
Industrial
HVAC
To learn about the entire
line of TPI products visit:
www.tpi-thevalueleader.com
L TAW 190 SERIES-1004
Copyright © 2004 Test Products International, Inc.
The
Value
Leader™
• Auto Power Off DMM will automatically power down
after approximately 15 minutes of inactivity to extend
battery life. Disable Auto Power Off: Hold down the
REC button and turn the meter on.
• Diode Test displays approximate forward bias voltage
• Continuity and buzzer to check for opens and shorts
ADDITIONAL FEATURES AVAILABLE ON
192 & 194 ONLY
• Time Stamp Logging logs up to 100 readings
(min/max/avg) with a time stamp
• Pulse Width measures the duration of a pulse
• Duty Cycle displays the total “on” time of a component
• True RMS needed to accurately
measure nonsinusoidal AC voltage and
current waveforms found on controls
and circuits
• Inductance measures the value of inductors and
coils
• Increased safety with Silicone rubber
1,000V CAT III, 600V CAT IV, 10A test leads
(CE & cUL listed)
• Temperature for use in HVAC, electrical, and
electronic applications
• Capacitance measures the value of capacitors
• Conductance measures the ability of a material to
conduct electricity
• dB Readout displays a voltage level without regard
for impedance
visit us at www.tpi-thevalueleader.com
Quality TPI Products Online at:
www.
GlobalTestSupply.com
sales@GlobalTestSupply.com
190 Series Features & Specifications
190 Series Functions
Features (for all models)
optically
isolated
RS232
interface
port
TRIPLE
DISPLAY:
shows more than
one reading
simultaneously
large 50,000
count display
Diode Test:
REL%:
relative;
display
a measured
value as a
percentage.
RANGE:
automatically
sets the best
range for
measurement
Basic DC accuracy:
Compare:
Data Hold:
Relative:
Record:
Auto Range:
Continuity & Buzzer:
RS232:
Safety:
LCD:
Triple Display:
Bar Graph
Back Light:
True RMS:
Test Leads:
Auto Power Off:
Specification
AC Volts
Max. reading
Frequency
Best resolution
DC millivolts
Max. reading
Best resolution
Max. reading
Best resolution
Max. reading
Best resolution
DC Volts
EDIT:
REC:
record
minimum,
maximum
& average
reading
DC Microamps
DC Milliamps
DC Amps
HOLD:
data hold
BACKLIGHT:
LED type;allows
viewing in any
light
condition
AC Microamps
AC Miliamps
AC Amps
Ohms
RESISTANCE,
CONTINUITY
& BUZZER
Kohms
COMP:
compare
Mohms
ADP: adapter
position on range
selector switch to
directly use
optional
accessories
• A251
• A254
• A296
• A301
• A312
• A620
DIODE TEST:
displays
approximate
forward bias
voltage
0.05%
Compares stored value with measured value for matching components
Enables the reading on the display to be frozen. The two hold system holds the previous reading when a new one is received
Display a measured value as a percentage of a stored value. Useful for component testing
Record Minimum, Maximum, and average reading.
Automatically selects the best range for measurement
Check for opens and shorts
Optically isolated software optional
Designed to meet cULus 3111 and IEC1010
Large 50,000 count display
Shows more than one reading simultaneously
51 Segments Analog Bar Graph to catch fast AC fluctuations
Allows viewing in any light condition
Needed to accurately measure nonsinusoidal AC voltage and current waveforms found on controls and circuits
Silicone rubber 1,000 CAT III, 600V CAT IV, 10A
DMM will automatically power down after approximately 15 minutes of inactivity to extend battery life. Disable Auto Power Off:
Hold down the REC button and turn the meter on
Displays approximate forward bias voltage
Please refer to back
for accessory
descriptions
Frequency Hz
Frequency KHz
Inductance mH
Max. reading
Best resolution
Max. reading
Best resolution
Max. reading
Best resolution
Max. reading
Best resolution
Max. reading
Best resolution
Max. reading
Best resolution
Max. reading
Best resolution
Max. reading
Best resolution
Max. reading
Best resolution
Max. reading
Best resolution
Max. reading
Best resolution
Temperature (maximum)
Resolution (maximum
Max. reading
Capacitance
Best resolution
Micro farads
Conductance
Duty Cycle
Pulse Width
dB
Fuse
Agency Approval: CEIC61010
Actual size 4.5”w x 8.0”h x 2.0”d
Quality TPI Products Online at:
cULus3111
www.
GlobalTestSupply.com
190
(resolution)
750
(45Hz to 20kHz)
(0.0001V)
500
(0.001mV)
1,000
(0.0001V)
5,000
(0.01uA)
500
(0.001mA)
10
(0.0001A)
5,000
(0.01uA)
500
(0.001mA)
10
(0.0001A)
500
(0.01 ohm)
500
(0.0001 Kohm)
50
(0.0001 Mohm)
500
(0.001Hz)
500
(0.0001kHz)
no
20,000
(0.001)
192
(resolution)
750
(45Hz to 20kHz)
(0.0001V)
500
(0.001mV)
1,000
(0.0001V)
5,000
(0.01uA)
500
(0.001mA)
10
(0.0001A)
5,000
(0.01uA)
500
(0.001mA)
10
(0.0001A)
500
(0.01 ohm)
500
(0.0001 Kohm
50
(0.0001 Mohm)
500
(0.001Hz)
500
(0.0001kHz)
300
(0.01)
2,462°F
0.1°F
100
(0.001)
50nS
0.1 to 99.9%
500mS, 1S
60dB
600V 500mA
600V 10A
CAT II 1,000V
CAT III 600V
pending
sales@GlobalTestSupply.com
600V 500mA
600V 10A
CAT II 1,000V
CAT III 600V
pending
194
(resolution)
750
45Hz to 20kHz)
(0.0001V)
500
(0.001mV)
1,000
(0.0001V)
5,000
(0.01uA)
500
(0.001mA)
10
(0.0001A)
5,000
(0.01uA)
500
(0.001mA)
10
(0.0001A)
500
(0.01 ohm)
500
(0.0001 Kohm)
50
(0.0001 Mohm)
500
(0.001Hz)
500
(0.0001kHz)
300
0.01
2,462°F
0.1°F
20,000
(0.001)
50nS
0.1 to 99.9%
500mS, 1S
60dB
1000V 440mA
1000V 11A
CAT III 1,000V
CAT IV 600V
pending
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising