5U 48 bay 6G SAS Expander JBOD Enclosure

5U 48 bay 6G SAS Expander JBOD Enclosure
DAS >> JBOD >> Rackmount SAS/SATA
C o m p u t e r
G m b H
Carl-Zeiss-Str. 27-29 • D-73230 Kirchheim / Teck
Tel. +49(0)7021-487 200 • Fax +49(0)7021-487 400
Through the latest 6Gbps SAS expansion technology, the NS390S-8026 supports SES-2 protocols for host
management of cascaded external enclosures. Provided with 48 hot-swappable HDD trays, each front of the
drive trays is built with an HDD failure LED indicator to let users avoid pulling out the wrong drives that lead
to the total crash of the whole data stored on the RAID volumes. The high-density 48-bay rackmount storage
features excellent enclosure management covering monitoring of all components and audible/visual alerts for
fan, power supply failures and over-temperature. LCD displays are given in front of the enclosure to let IT
administrators know immediately the status of all units. The built-in eight large 120×120×25 mm cooling fans
provide best airflow ventilation for drives while maintaining the enclosure at the lowest sound volume, so IT
administrators are now able to be kept away from the noise resulting from the cabinet room.
Application Diagram
5U 48 bay 6G SAS Expander
JBOD Enclosure
SAS in
SAS Exp. out
High density 5U 48-Bay rackmount chassis
Backplane design for up to forty-eight(48) 3.5" SAS/SATA 6G/3G bps drives
Built in latest 6Gb/s SAS Expander for single miniSAS(SFF8088) cable connectivity
Provides miniSAS ports for next storage expansion
SAS daisy chain for max 128 HDDs
Host Interface
miniSAS(SFF8088) up to 24Gbps bandwidth
LCD control panel for setup, alarm mute and configuration
HDD Interface
SAS/SATA (6G/3Gbps)
Eight(8) big 120x120x25mm cooling fans for superior enclosure ventilation
No. of Disk(s)
Up to 48
SAS Expander
Built-in 6Gb/s SAS Expander
Individial Key lock of each HDD tray for physical security
Expansion Port
Two miniSAS ports for next storage expansion
Forty-eight(48) hot-swappable hard drive drays with LED indicators for
LED Display for
HDD power,activity and failure
Each Tray
White - Power On Indicator
Flash Blue - HDD Accessing Indicator
Red - HDD Failure Indicator
LCD Control
LED Display for
The Netstor NS390S-8026 is the most high-density 48-bay SAS JBOD storage enclosure designed for HPC
(High Performance Computing) application of mass capacity storage, which significantly and effectively saves
the cost for spaces needed within the 19” rack and the cabinet room. For the portion of the power, the 5U
Power Supply
48-bay storage adopts the highly efficient 80 PLUS redundant power supply that efficiently uses the power
toward the enclosure and allows a lower budget for the maintenance of the arrays of the mass capacity
storage. The NS390S-8026 is built with the latest 6Gbps SAS expansion technology that makes 6Gbps
SAS/SATA 3.5-inch HDDs available to the enclosure. Therefore, both high-density and high-performance
features are presented through the rackmount 48-bay storage. With the innovative SAS expansion technology
inside, each SAS host RAID card is capable of supporting a capacity of up to 128 hard drives.
O.S. Support
Storage Temperature
Operating Temperature
Relative Humidity
LCD control panel for setup,alarm mute and configuration
1. Enclosure power LED, Green - Power On
2. Busy LED, Flash green - Host computer accessing the enclosure
3. Fault LED, Red - Enclosure failure
Heavy-duty cold-rolled steel Housing
79 (D) x 44(W) x 22(H) cm
31 (D) x 17.3 (W) x 8.66 (H) inch
800W Redundant PSU (High-efficiency 80 Plus )
Input: 90-230 VAC/50-60 HZ
Output: +5V and +12V
Eight Big 12 x 12 x 2.5 cm cooling Fans
OS Independent
0 to 40°C (32 to 104°F)
-10 to 50°C (-14 to 122°F)
20 to 80% (non-condensing)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF