pentek intellidrive

pentek intellidrive
PENTEK INTELLIDRIVE
CONSTANT PRESSURE CONTROLLER
™
Intelligent Variable Frequency Drive
For Residential Well Pump Systems
Maintains Constant Pressure Inside and Outside
PENTEK
®
ELECTRONICS CATALOG
Motors, Controls and Drives
w w w.PUMPS.com
CONSTANT PRESSURE
FOR WELL PUMP SYSTEMS
For use with both Submersible and Above Ground Well
Pumps to Control Changes in Water Demand
Most homeowners with well systems know what happens
when demand for water changes. If they’re taking a shower,
water pressure drops when someone starts the dishwasher
or turns on a faucet. Weak showers, unclean dishes and
other water pressure problems become frustrating daily
experiences.
A “Variable Frequency Drive” for Submersible or Above
Ground Well Pumps.
The PENTEK INTELLIDRIVE Water Pressure Control Center
directs changes in pump motor speed, responding to
fluctuations in demand. If water pressure starts dropping,
an electronic pressure transducer signals the drive to
accelerate the pump motor to increase water volume going
into the home.
The Benefit? Strong, equal pressure, everywhere.
Homeowners will recognize the difference right away.
Water flows smoothly and evenly throughout the home.
Regardless of changes in demand, water pressure stays
the same: in the shower, the dishwasher, and from every
other faucet and fixture.
And when homeowners are outside, they’ll enjoy a lush,
green lawn and landscaping. Sprinkler systems will
perform at their best, with consistent spray patterns,
constantly pressurized to achieve complete coverage.
The pump and motor will last longer.
PENTEK INTELLIDRIVE features “Soft Start/Coast to Stop”
design, which minimizes mechanical stress. And during
long-running applications like lawn irrigation, pressurecycling is eliminated…another system stress reducer.
PENTEK INTELLIDRIVE Leading-edge technology for a
premium residential water system that makes life better!
2
How PENTEK INTELLIDRIVE™ works
2
3
1
5
6
1
PENTEK INTELLIDRIVE is connected to an
Electronic Pressure
Transducer, and to the
submersible pump.
2
PRESSURE TANK
this properly sized tank is
installed between the pump and the pressure transducer.
The minimum size tank
recommended is 2 gallons.
3
PRESSURE TRANSDUCER
measures changes in system
pressure continuously, and
sends electronic signals to
PENTEK INTELLIDRIVE.
4
WHEN PRESSURE DROPS
PENTEK INTELLIDRIVE
responds by increasing pump
motor speed andwater flow;
first from the pressure tank,
then directly from the well.
4
5
INCREASED WATER FLOW
maintains constant pressure
wherever it is needed
throughout the home.
6
DECREASED DEMAND
when signaled by the pressure
transducer, the pressure tank is
replenished, and PENTEK INTELLIDRIVE
responds by reducing or shutting off
water flow. Once water flow shuts off, the
system returns to monitoring phase until
the next demand for pressure adjustment.
PENTEK INTELLIDRIVE
gives you the product range you need
with just three models…
PUMP
MOTOR
INPUT
OUTPUT
PENTEK
INTELLIDRIVE
Product Range
2-WIRE
1-PHASE
1-PHASE
UP TO 1.5 HP
3-WIRE
1-PHASE
1-PHASE
UP TO 2 HP
3-WIRE
1-PHASE
3-PHASE
UP TO 5 HP
3
ADVANCED TECHNOLOGY. SUPERIOR PERFORMANCE.
KEYHOLE MOUNT
For fast and easy installation
LCD INFORMATION
CENTER
Displays installation,
status and fault
information in easy-tounderstand language
instead of codes
GROUND DETECTION
Message Center shows
if there is a grounding
problem
MULTIPLE ACCESSORY INPUTS
Additional inputs allow use of
multiple drive accessories at
the same time
BEST-IN-CLASS
EMI/RFI FILTER
Superior noise and
interference protection,
including AM radio signals
SPACIOUS
WIRING AREA
For fast and easy
installation
ELECTRONIC
PRESSURE TRANSDUCER
More accurate and reliable
than mechanical pressure
switch, with piezo resistive
technology designed to
resist water hammer
TEMPERATURESENSITIVE
INTELLIGENT FAN
Operates when needed for
quiet operation
SD CARD SLOT
For easy software updates when provided
by manufacturer
SPRING TERMINALS
For secure connections
and easy installation
without special tools
PROGRAMMABLE
INPUT/OUTPUT RELAYS
Provide application
flexibility
EASY-ACCESS CONDUIT OPENINGS
Align with appropriate
terminals for straight-in
accessibility. Fits 1/2", 3/4"
or 1-1/4"
4
REMOVABLE
TERMINAL BLOCKS
For easy wiring of motor
and power supply – field
replaceable
AN INTELLIGENT CONTROL... SIMPLE TO OPERATE, EASY TO UNDERSTAND.
No other variable frequency drive provides such an
effective operator interface with easy touchpad operation
and a spectrum of features that allows easy configuration
for most residential water control applications. And the
LCD Information Center communicates clearly in words,
instead of confusing light codes.
START-UP IS SIMPLE…
ENTER MOTOR PHASE
ENTER MOTOR TYPE
ENTER SERVICE FACTOR AMPS
ENTER CURRENT TIME
ENTER CURRENT DATE
1
2
3
4
5
6
BACKLIT LCD DISPLAY
PUMP-OUT BUTTON For cleaning of new wellsand
fixed frequency operation
PSI PRESET Sets pressure to
any value desired
LED STATUS
INDICATION
CHOOSE “PUMP OUT”
OR “AUTO START”
DIAGNOSTICS INDICATOR Self-diagnostic messaging
for ease of service
FAULT LOG Stores 15 faults with timestamps
KEYPAD LOCKOUT For security against tampering
and unintended adjustments
MULTI-LINGUAL OPTIONS English, French or Spanish
AUTO-START With automatic line-fill
functionality, providing
constant pressure operation
5
COMPETITIVE
PRODUCT
COMPARISON
OPERATING RANGE
2-Wire, 3-Wire and
3-Phasein same unit
3-Phase Output (60Hz/80Hz)**
COMPETITION:
Most competitors offer
separate units for
1-Phase and 3-Phase outputs.
NUMBER OF MODELS
NEW! Just three models will
meet all your needs, reduce
inventory requirements and
simplify product selection.
COMPETITION:
Some competitors offer as
many as 11 different models.
ADJUSTABLE
PROGRAMMING
PARAMETERS GROUND DETECTION FULLY PROGRAMMABLE DRIVE 34 different parameters
can be adjusted. Provides
ultimateflexibility to finetune system operation.
Detects and displays when there
is a grounding problem.
COMPETITION:
No competitor offers this technology.
Easily programmable for a variety of
applications and specific settings. SD Card Slot for easy updating of
software enhancements when
provided by Pentair.
COMPETITION:
Most competitors offer
factory-configuredsettings,
which limit flexibility.
COMPETITION:
Competitors offer no
more than 6 adjustable
programming parameters.
60Hz operation is recommended as the industry standard. Intermittent 80Hz operation is an
acceptable option.
** Ongoing 80Hz operation may reduce the life of the pump and motor.
MODEL
NUMBER
PID10
PID20
PID50
* Select drives by S.F amps of pump motor.
6
* Select drives by S.F. amps of pump motor.
MOTOR
TYPE
HP
RANGE
STATE-OF-THE-ART
INPUT
VOLTAGE
MAXIMUM
OUTPUT AMPS
2-WIRE* 1-PHASE
3-WIRE* 1-PHASE
3-PHASE
2-WIRE* 1-PHASE
3-WIRE* 1-PHASE
3-PHASE
2-WIRE* 1-PHASE
0.5–1.5 HP
9.5A
7.5A
5A
11A
13.5A
8.5A
11A
3-WIRE* 1-PHASE
0.5 – 2 HP
13.5A
3-PHASE
0.5 – 5 HP
18A
0.5–1 HP
0.5–1.5 HP
0.5–2 HP
190V – 265V
ENCLOSURE
TYPE
NEMA 3R outdoor
DIAGNOSTICS EMI/RFI FILTERS TERMINAL BLOCKS LCD display provides easy-tounderstand information for
easydiagnostics and troubleshooting.
Best in the industry, to eliminate
potential interference.
Removable/Replaceable terminal
blocks for easy wiring of motor
and power supply.
COMPETITION:
Flashing LED sequence provides
unclear diagnostic information.
COMPETITION:
Most competitors offer limited
interference filtering capabilities.
COMPETITION:
Fixed blocks require replacement
of drive for stripped terminals.
CONNECTIONS SURGE PROTECTION
Increased surge protection covers both line and load side
PENTEK INTELLIDRIVE™ SPECIFICATIONS
Enclosure Dimensions
Width: 9.72"
Height: 19"
Depth: 6.93"
Carton Dimensions: 10.4" width, 22.3" height, 9.4” depth
Shipping Weight: 22 pounds
Ambient Temperature Range: -20°C (-4°F) to 50°C (122°F)
Ambient Humidity Range: 95% non-condensing
Includes:
Variable Frequency Drive
Transducer: 1/4" thread size, 18 NPT type
Transducer Cable: 10' length standard
Conduit holes align with terminal
blocks for easy accessibility.
COMPETITION:
Tight and cramped access makes
connections more challenging.
9.72"
6.93"
19"
7
293 WRIGHT STREET, DELAVAN, WI 53115 WWW.PUMPS.COM
PH: 866-9-PENTEK ORDERS FAX: 800-426-9446
IN CANADA
269 TRILLIUM DRIVE, KITCHENER, ON N2G 4WS
PH: 519-748-5470 ORDERS FAX: 519-748-2553
Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.
© 2013 Pentair Ltd. All Rights Reserved. P8063WS (11/12)
P8158WS (02/01/13)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising