pro-ject phono product catalogue 2015

pro-ject phono product catalogue 2015
PRO-JECT PHONO
PRODUCT CATALOGUE 2015
V1.6
GO ANALOGUE · IN THE THIRD MILLENNIUM · PHONO PRODUCTS 2015
PRODUCT CATALOGUE 2015
CONTENTS
page
page
♦ Elemental Line
3
♦ Special limited edition 9
♦ Essential Line
3
♦ Cartridges
9
♦ Debut Line
4
♦ Tonearms
10
♦ Classic Line
5-6
♦ Phono Cables
11
♦ RPM Line
7
♦ Phono Electronics
11 - 15
♦ Signature Line
8
♦ Accessories
15 - 19
ABOUT PRO-JECT AUDIO SYSTEMS
Pro-Ject Audio Systems was founded by Heinz Lichtenegger 1990 in
Vienna, with the idea that analogue playback is the most costeffective way to listen to music of audiophile quality.
Inspired by the concept of supporting analogue in the face of the
digital onslaught, Pro-Ject Audio Systems became one of the most
powerful driving forces in reinventing analogue turntables for the hi-fi
market. Today, Pro-Ject Audio Systems is the world leader in the
manufacture of quality hi-fi turntables, as turntables are once again
accepted as a must-have for every concerned music lover. Pro-Ject
Audio Systems’ products are exported to almost 80 countries worldwide and is the recipient of nearly every award in the audio industry.
Since 2006, Pro-Ject Audio Systems has been bringing its idea “less is more” mission
to the digital world. Inspired by the new possibilities of the iPod and high-quality music reproduction from a PC or laptop, Pro-Ject Audio Systems has designed a complete new and revolutionary range of micro high-end Hi-fi components under the
family name BOX DESIGN. Starting with the smallest audiophile amp in the world,
with open and euphonic sound, Pro-Ject Audio Systems now produces all of the components of traditional
hi-fi systems including CD players, tuners, phono amps, headphone amps and switching modules, as well as
digital products such as docking stations, D/A converters and streamers to connect with the PC wired or
wireless.
BOX DESIGN regards itself as the ‘next generation of hi-fi’ – the link between the micro-sized hardware of the
IT world and the big boxes of the audiophile world. All products, except for speakers and headphones, are
designed and produced in Europe.
Pro-Ject: Simple-to-use, high quality sound, astonishing value, long-term stability and good service.
2
CATALOGUE 2015 · PRO-JECT Analog products
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
Elemental Line
ELEMENTAL
OM 5e SRP € 199,00
Audiophile „Best Buy“ turntable
• Connec on to phono preamp or amplifier with phono preamp required • Pre-mounted interconnect cable with gold-plated RCA plugs • Dimensions 430 x 90 x 300mm (WxHxD) • Weight 2,7kg
ELEMENTAL PHONO USB
OM 5e SRP € 249,00
Turntable for Hifi & audio transfer to PC/Mac
• Integrated Phono-MM preamplifier • Connec ons: line-level RCA to amp & USB to PC/Mac
(simultaneously) • Dimensions 430 x 90 x 300mm (WxHxD) • Weight 2,75kg
Both models: • Ultra rigid simplified design • Central gravity point minimizing motor and chassis resonances • DC driven AC motor control • 8.6" aluminium tone-arm • Unique OM 5 op mized tonearm •
Super easy plug and play without any need of counterweight and an ska ng adjustment • Colour
op ons: White/Black, Red/Black, Silver/Black • Op onal dustcover: COVER IT E
Pictured with op onal plaCer Acryl it E
Essen+al Line
ESSENTIAL II
OM 5e SRP € 259,00
Audiophile „Best Buy“ turntable
• Connec on to phono preamp or amplifier with phono preamp required • Pre-mounted interconnect cable with gold-plated RCA plugs • Dimensions 420 x 112 x 330mm (WxHxD) • Weight 4,0kg
ESSENTIAL II PHONO USB
OM 5e SRP € 339,00
Turntable for Hifi & audio transfer to PC/Mac
• Integrated Phono-MM preamplifier • Connec ons: Line-level RCA to amp & USB to PC/Mac
(simultaneously) • Dimensions 420 x 112 x 330mm (WxHxD) • Weight 4,1kg
All models: • Belt drive with silicone belt • Low vibra on synchronous AC motor • DC driven AC motor
control • 8.6" tone-arm with aluminium headshell made out of one piece • Ortofon OM 5e cartridge,
pre-mounted • Colour op ons: Black, red, white
ESSENTIAL II DIGITAL
OM 5e SRP € 379.00
NEW Audiophile „Best Buy“ turntable with analogue & digital op+c output
• Integrated Phono-MM preamplifier • Connec ons: Digital op+cal output (Toslink) & Line-level RCA
to amp • Belt drive with silicone belt • Low vibra on synchronous AC motor • DC driven AC motor
control • 8.6" tone-arm with aluminium headshell made out of one piece • Ortofon OM 5e cartridge,
pre-mounted • Colour op ons: Black, red, white • Dimensions 420 x 112 x 330mm (WxHxD) • Weight
4,1kg
Pictured with op onal plaCer Acryl it E
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
PRO-JECT PHONO · CATALOGUE 2015
3
Debut Line
DEBUT CARBON DC
OM 10 SRP € 349,00
2M Red SRP € 399,00
Audiophile „Best Buy“ turntable
• Magne c cartridge op ons from Ortofon: OM 10 or 2M Red • Connec on to phono preamp or amplifier with phono preamp required • Pre-mounted interconnect cable with gold-plated RCA plugs
European Turntable 2012-2013
DEBUT CARBON PHONO USB DC
OM 10 SRP € 449,00
Audiophile turntable for Hifi & audio transfer to PC/Mac
• Magne c cartridge: OM 10 • Integrated Phono-MM preamplifier • Connec ons: Line-level RCA to
amp & USB to PC/Mac (simultaneously)
Both models: • Precision belt drive with synchronous motor • DC driven precision AC motor control •
New TPE motor suspension • 8,6” carbon tonearm • Increased plaCer size with more weight • Felt
mat • 8 high-gloss colour op ons: Green, piano, blue, white, red, light-grey, yellow, purple • Dimensions 415 x 118 x 320mm (WHD lid closed) • 415 x 365 x 465mm (WHD lid open) • Weight 5,6kg
DEBUT CARBON ESPRIT DC
2M Red SRP € 449,00
Audiophile „Best Buy“ turntable
• Lifestyle for vinyl fans • 8,6” carbon tonearm • Heavy non resonant acrylic plaCer • Precision belt
drive with synchronous motor • DC driven precision AC motor control • New TPE motor suspension •
Magne c cartridge 2M Red from Ortofon • 8 high-gloss colour op ons: Red, piano, blue, white,
green, light-grey, yellow, purple • Dimensions 415 x 118 x 320mm (WHD lid closed), 415 x 365 x
465mm (WHD lid open) • Weight 5,6kg
DEBUT CARBON ESPRIT SB DC
.
.
2M Red SRP € 499,00
Audiophile „Best Buy“ turntable for 33, 45 & 78 & speed switch
• Lifestyle & convenience for vinyl fans • 8,6” carbon tonearm • Heavy non resonant acrylic plaCer •
Belt drive with synchronous motor • TPE motor suspension • DC driven precision AC motor control •
Magne c cartridge 2M Red from Ortofon • High-gloss colour op ons: piano black, red, white blue,
green, light-grey, yellow, purple • Dimensions 415 x 118 x 320mm (WHD lid closed), 415 x 365 x
465mm (WHD lid open) • Weight 5,6kg
.
.
.
4
CATALOGUE 2015 · PRO-JECT PHONO
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
Classic Line
1XPRESSION CARBON (DC)
n/c SRP € 599,00
Manual turntable including carbon tonearm
2M Red SRP € 650,00
• Full carbon tonearm with spinoff EVO technology • EVO gimbal design • EVO counterweight with
arm resonance damping device • Belt drive design • Low noise AC motor • DC driven precision AC
motor control • MDF plinth • PlaCer bearing with low-tolerance chrome-plated stainless-steel axle
running on polished ball bearing in brass bearing housing • Motor decoupling reduces vibra on •
Height adjustable rubber-damped aluminium cones • Gold-plated RCA phono sockets • Colour opons: blue, bordeaux, piano black • Dimensions 415 x 130 x 335mm (WHD lid closed) • 415 x 365 x
465mm (WHD lid open) • Weight 5,5kg
1XPRESSION CARBON CLASSIC (DC)
2M Silver SRP € 799,00
Manual turntable with fi=ed cartridge Ortofon 2M Silver
• Full carbon tonearm with spinoff EVO technology • EVO gimbal design • EVO counterweight with
arm resonance damping device • With Highend MM system Ortofon 2M Silver (like 2M Red but with
silver spools for superior resolu on and more details) • Belt drive design • Low noise AC motor • DC
driven precision AC motor control • MDF plinth • Height-adjustable rubber-damped aluminium
cones • Motor decoupling reduces vibra on • Fine-balanced aluminium plaCer • Standard felt mat
supplied • Low-tolerance chrome-plated stainless-steel axle running on polished ball bearing in brass
housing • Interchangeable connec ng cables • Gold plated phono sockets and earth screw • Colour
op ons: Mahogany, olive veneer, piano-lacquered black and piano-lacquered white • Dimensions 415
x 130 x 335mm (WHD lid closed) • Weight 5,5kg
2XPERIENCE SB
n/c SRP € 1099,00
2M Silver SRP € 1199,00
NEW Manual turntable. Op+onal with cartridge Ortofon 2M Silver
• Full carbon 9“ tonearm with spinoff EVO technology • EVO gimbal design • EVO counterweight with
arm resonance damping device • Belt drive design • Electronic speed control with 33/45 rpm speed
change, which acts as “Speed Box” with ul+mate speed stability • MDF base • Height-adjustable
Sorbothane®-damped aluminium cones • Motor decoupling reduces vibra on • Resonance-op mised
2kg MDF/vinyl sandwich plaCer • Screw-down metal record clamp • Low-tolerance chrome-plated
stainless-steel axle running on Teflon bearing plate in sintered bronze bearing housing • Gold plated
phono sockets and earth screw • Standard cable is provided • Finish op ons: 3 wood veneer maC
(eucalyptus, palisander, walnut) and 3 high-gloss (HG black piano, HG mahogany, HG olive) • Dimensions 460 x 160 x 360mm (WHD lid closed) • Weight 7,7kg
2XPERIENCE DC ACRYL
2M Silver SRP € 999,00
NEW Manual turntable with cartridge Ortofon 2M Silver
• Full carbon 9“ tonearm • Low noise AC motor • Precision belt drive with synchronous motor • DC
driven precision AC motor control • New TPE motor suspension • Transparent acrylic plinth • Motor
decoupling reduces vibra on • Resonance-op mised 2kg MDF/vinyl sandwich plaCer • Screw-down
metal record clamp • Height-adjustable Sorbothane®-damped aluminium cones• Low-tolerance
chrome-plated stainless-steel axle running on Teflon bearing plate in sintered bronze bearing housing • Gold plated phono sockets and earth screw • Standard cable is provided • Dimensions 460 x 160
x 360mm (WHD lid closed) • Weight 7,6kg
6PERSPEX SB
n/c SRP € 1.599,00
NEW Manual turntable, Op+onal with cartridge Ortofon 2M Blue
2M Blue SRP € 1.799,00
• Belt drive design • Transparent acrylic plinth • 3 individually height-adjustable Sorbothane®damped aluminium cones carry motor sub-chassis • Corian subchassis rests on 3 magne c fields •
Built-in spirit level • Electronic speed control with 33/45 rpm speed change, which acts as “Speed
Box” with ul+mate speed stability • Silent running AC motor • Inverted bearing uses stainless-steel
axle carrying a ceramic ball on which ceramic bearing plate runs • 2kg resonance-op mised sandwich
plaCer with 4mm vinyl-layer • Screw-down metal record clamp • 9“ Evolu on tonearm • Gold plated
5pin to RCA cable included (XLR version as an op on) • Dimensions 460 x 183 x 365mm (WHD lid
closed) • Weight 10,5kg
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
PRO-JECT PHONO · CATALOGUE 2015
5
XTENSION 9 EVOLUTION
n/c SRP € 2.195,00
Highend turntable with 9“ tonearm
• Heavy belt drive turntable • Precision balanced sandwich-plaCer with vinyl layer • Mass loaded
magne c floa ng subchassis • Inverted ceramic ball bearing with magne c support • Heavy weight
record clamp • Extremely low level of natural resonance • Perfect decoupling through magne c
feet • Electronic speed control 33/45/78 Rpm • 9“ Tonearm 9cc Evolu on made from carbon fibre •
Inverted tonearm bearings (ABEC 7 quality) • Colour op ons: Mahogany, olive veneer and pianolacquered black, white or red • Dimensions 465 x 185 x 350mm (WHD lid closed) • Weight 16kg
European Analogue Source 2014-2015
XTENSION 10 EVOLUTION
n/c SRP € 3.300,00
Highend turntable with 10“ tonearm
• Super-heavy 22kg belt drive turntable • Mass loaded magne c floa ng subchassis • Precision balanced sandwich-plaCer with vinyl layer • Inverted ceramic ball bearing with magne c support •
Heavy weight record clamp • Extremely low level of natural resonance • Perfect decoupling through
magne c feet • Electronic speed control 33/45/78 Rpm • Tonearm 10cc Evolu on made from carbon
fibre • Inverted tonearm bearings (ABEC 7 quality) • Gold plated 5pin to RCA cable included (5pin to
XLR cable for use with Phono Box RS is available on request) • Colour op ons: Mahogany, olive veneer and piano-lacquered black, white or red • Dimensions 480 x 235 x 400mm (WHD lid closed) •
Weight 22kg
XTENSION 12
Pro-Ject 12cc Evolu on SRP € 3.990,00
Ortofon RS-309D SRP € 6.500,00
Manual turntable with built-in Pro-Ject Speed Box DS
• Super-heavy 25kg mass load magne c floa ng belt drive design • TPE® damped ultra precise balanced sandwich-plaCer out of special alloy combined with Vinyl layer • Brass record puck • Ultra low
noise motor highest selec on • Magnet supported, inverted main bearing with ceramic thrust-pad •
Integrated Speed Box DS for super silent motordrive and electronically switchable speed • Metalgranulate filled plinth for universal damping • Mass loaded interchangeable armboard • Height adjustable magnet supported feet for perfect isola on • Gold plated 5pin to RCA cable included (5pin to
XLR cable for use with Phono Box RS is available on request) • HG colour op ons: mahogany, olive
veneer, piano black • Dimensions 550 x 250 x 450mm (WHD lid closed) • Weight 25kg
6
CATALOGUE 2015 · PRO-JECT PHONO
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
RPM Line
RPM 1 Carbon
n/c SRP € 399,00
NEW Manual turntable with 8.6" S-shaped tone arm
2M Red SRP € 449,00
• Belt drive turntable with quiet running synchronous motor • DC driven precision AC motor control • Isolated motor plaOorm, decoupled from the plinth • 2-step pulley • Eliminates vibra on transmission • Resonance-op mised plaCer made of medium density fibre • Inverted, chrome-plated
stainless-steel axle • Polished metal ball in sintered bronze bearing housing • Central mass point
op+mises resonance behaviour • Interchangeable connec ng cables • Gold plated phono sockets
and earth screw • Colour op ons: glossy black, red and white • Dimensions 380 x 110 x 350mm
(WHD) • Weight 3,8kg
RPM 3 Carbon
n/c SRP € 650,00
NEW Manual turntable with 10" S-shaped carbon tonearm
2M Silver SRP € 699,00
• Belt drive turntable with quiet running synchronous motor • DC driven precision AC motor control • Isolated motor plaOorm, decoupled from the plinth • 2-step pulley • Eliminates vibra on transmission • Resonance-op mised plaCer made of medium density fibre with vinyl layer • Inverted,
chrome-plated stainless-steel axle • Polished metal ball in sintered bronze bearing housing • Central
mass point op+mises resonance behaviour • Interchangeable connec ng cables • Gold plated phono
sockets and earth screw • Colour op ons: glossy black, red and white • Dimensions 447 x 118 x
373mm (WHD) • Weight 5,5kg
RPM 5 Carbon
n/c SRP € 1199,00
NEW Manual turntable with 9" EVO technology carbon tonearm
• Belt drive turntable with quiet running synchronous motor • DC driven precision AC motor control
with electronic 33/45 speed switch • Isolated motor plaOorm, stands separated from the plinth •
Eliminates vibra on transmission • 28mm acrylic pla=er • Inverted, chrome-plated stainless-steel
axle carrying a ceramic ball on which the ceramic bearing plate runs • 32mm plinth thickness with
carbon layer on top • Central mass point op mises resonance behaviour • Interchangeable connec ng cables • Gold plated phono sockets and earth screw • Colour op ons: glossy black, red and
white
RPM 9 Carbon
n/c SRP € 1995,00
NEW Manual turntable with 9" EVO carbon tonearm
• Belt drive • DC driven precision AC motor control with electronic 33/45 speed switch • Isolated
motor plaOorm, stands separated from the plinth • Mass loaded magne+c floa+ng subchassis • Inverted ceramic ball bearing • Heavy weight record puck • Inverted, chrome-plated stainless-steel
axle • Polished metal ball in sintered bronze bearing housing • 7,2kg acous+cally inert aluminium
pla=er • Extremely low level of natural resonance • Central metal block op mises centre of gravity
and damps main bearing • Interchangeable connec ng cables • Gold plated phono sockets and earth
screw • Gold plated 5pin to RCA cable included (XLR version as an op on) • Dimensions 440 x 180 x
325mm (WHD) • Weight 16,7kg
RPM 10 Carbon
n/c SRP € 2990,00
NEW Manual turntable with 10" EVO carbon tonearm including Ground it Carbon base
• Extra-heavy chassis with carbon layer • Belt drive • Separate metal housing for motor with
built-in DC driven precision AC motor control • Electronic 33/45 speed switch • 3 individually height-adjustable magne c field feet • Spirit level supplied • Extra-heavy chassis and granulate filled plinth guarantee constant damping • Extra heavy aluminium pla=er • Brass record
puck • Inverted bearing with stainless-steel axle carrying a ceramic ball on which the ceramic
bearing plate runs • Central metal block op mises centre of gravity and damps main bearing •
Delivered with heavy turntable plaOorm Ground it Carbon • Gold plated 5pin to RCA cable
included (XLR version as an op on)
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
PRO-JECT PHONO · CATALOGUE 2015
7
Signature Line
SIGNATURE 10
n/c SRP € 4.990,00
Highend turntable with 10‘‘ single-pivot tonearm
• Heavy belt drive turntable • Mass loaded magne c floa ng subchassis • Precision balanced heavyweight magne cally decoupled resonance-op mised alloy plaCer with vinyl layer • Inverted ceramic
ball bearing with magne c support • Heavy weight record clamp • Extremely low level of natural
resonance • Perfect decoupling through magne c feet • Electronic speed control 33/45 Rpm • Singlepivot precision tonearm Signature 10 • HG colour op ons: Mahogany, olive veneer and pianolacquered black • Dimensions 475 x 188 x 350mm (WHD lid closed) • Weight 22,5kg
SIGNATURE 12
n/c SRP € 9.500,00
Non-compromise highend turntable with 12‘‘ single-pivot tonearm
• Heavy mass design with 34,3kg total weight • Mass-loaded subchassis design • 10,55kg magne cally decoupled main plaCer with vinyl layer • Resonance-op mised alloy • Magne c-floa ng plaCer
guarantees an absolute quiet running turntable • Inverted main bearing with ceramic ball • Flywheel
belt drive • Motor control system with LCD-display • Genuine Pro-Ject Audio Systems design 12“ single-pivot tonearm • Wide range of adjustment possibili es and choice of adequate counterweights •
Prac cally every cartridge can be mounted • High gloss metal surface • Piano-lacquer chassis with
magne c decoupling from surface • HG colour op ons: mahogany, olive veneer and piano-lacquered
black • Dimensions 570 x 250 x 470mm (WHD lid closed) • Weight 34,3kg
8
CATALOGUE 2015 · PRO-JECT PHONO
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
Special limited edi+on
Parov Stelar PS-00 „Frida“
2M Red SRP € 550,00
Limited edi+on audiophile turntable
• Collectors item and must have for vinyl and Parov Stelar fans • 7-layer high quality colour prin ng •
Pre-mounted interconnect cable with gold-plated RCA plugs • Based on famous Debut Carbon Esprit
Parov Stelar PS-01 „Wave“
2M Red SRP € 550,00
Limited edi+on audiophile turntable
• Collectors item and must have for vinyl and Parov Stelar fans • 7-layer high quality colour prin ng •
Pre-mounted interconnect cable with gold-plated RCA plugs • Based on famous Debut Carbon Esprit
Both models: • Precision belt drive with synchronous motor • DC driven precision AC motor control •
New TPE motor suspension • 8,6” carbon tonearm • Increased plaCer size with more weight • Felt
mat • Magne c cartridge Ortofon 2M Red premounted • Connec on to phono preamp or amplifier
with phono preamp required • Pre-mounted interconnect cable with gold-plated RCA plugs • Dimensions 415 x 118 x 320mm (WHD lid closed) • 415 x 365 x 465mm (WHD lid open) • Weight 5,6kg
Parov Stelar ESSENTIAL II “Demon”
OM 5e SRP € 359,00
NEW Limited edi+on audiophile turntable
• Belt drive with silicone belt • Low vibra on synchronous AC motor • DC driven AC motor control •
8.6" tone-arm with aluminium headshell made out of one piece • Ortofon OM 5e cartridge, premounted • Connec on to phono preamp or amplifier with phono preamp required • Pre-mounted
interconnect cable with gold-plated RCA plugs • Dimensions 420 x 112 x 330mm (WxHxD) • Weight
4,0kg
PRIMARY
OM 5e SRP € (on request)
NEW Limited edi+on audiophile „Plug & Play“ turntable
• Belt drive with silicone belt • Low vibra on synchronous AC motor • DC driven AC motor control •
8.6" aluminium tone-arm • Unique OM 5 op mized tonearm • Super easy plug and play without any
need of counterweight and an ska ng adjustment • Connec on to phono preamp or amplifier with
phono preamp required • Pre-mounted interconnect cable with gold-plated RCA plugs • Complete
with acrylic lid • Colour op ons: White, Black • Dimensions 420 x 112 x 330mm (WxHxD) • Weight
4,0kg
Cartridges
Ortofon 2M Silver
SRP € 199,00
Highend MM system
• Exclusive development for Pro-Ject Audio Systems • Based on Ortofon 2M series cartridge with
ellip cal stylus • Silver spools for superior resolu on and more details • High trackability • 2M silver
connects directly to MM phono preamp • Suitable for light to medium tonearm mass • 1/2-inch
mount • As with all MM cartridges, stylus can be exchanged
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
PRO-JECT PHONO · CATALOGUE 2015
9
Tonearms
PRO-JECT CC TONEARMS (carbon tube + carbon headshell)
FL
5P
BOX
9CC
SRP € 549,00
SRP € 579,00
SRP € 599,00
10CC
SRP € 569,00
SRP € 599,00
SRP € 619,00
12CC
SRP € 799,00
SRP € 829,00
SRP € 849,00
9CC - 9" precision tonearm with carbon-fibre armtube/headshell
• Conical carbon-fibre armtube avoids standing wave reflec ons • Inverted bearing design with four
hardened ABEC7 spec ballraces • Solid armbase permits accurate height adjustment of armtube and
VTA (ver cal tracing angle) • Single-screw fixing of armtube allows rota on for easy adjustment of
needle azimuth despite fixed headshell • Highly flexible top-grade copper internal wiring • Linn standard mount • Available with 5-pole standard socket, flying leads or terminal with phono sockets and
earth screw
10CC - 10" precision tonearm with carbon-fibre armtube/headshell
Same as above, but 10“ lenght
12CC - 12" precision tonearm with carbon-fibre armtube/headshell
Same as above, but 12“ lenght
PRO-JECT CC EVOLUTION TONEARMS
FL
5P
BOX
9CC EVOLUTION
SRP € 799,00
SRP € 829,00
SRP € 849,00
10CC EVOLUTION
SRP € 849,00
SRP € 879,00
SRP € 899,00
12CC EVOLUTION
SRP € 899,00
SRP € 929,00
SRP € 949,00
9CC EVOLUTION - 9" precision tonearm with carbon-fibre armtube/headshell
• Conical carbon-fibre armtube avoids standing wave reflec ons • Inverted bearing design with four
hardened ABEC7 spec ballraces • Solid armbase • Accurate height adjustment of armtube and VTA
(ver cal tracing angle) • Single-screw fixing of armtube allows rota on for easy adjustment of needle
azimuth despite fixed headshell • Internal wiring • Linn standard mount • Available with 5-pole standard socket, flying leads or terminal with phono sockets and earth screw
10CC EVOLUTION - 10" precision tonearm with carbon-fibre armtube/headshell
Same as above, but 10“ lenght
12CC EVOLUTION - 12" precision tonearm with carbon-fibre armtube/headshell
Same as above, but 12“ lenght
PRO-JECT SIGNATURE TONEARMS
SIGNATURE 9
SRP € 1.690,00
SIGNATURE 10
SRP € 1.790,00
SIGNATURE 12
SRP € 1.990,00
SIGNATURE 9 - 9" precision single-pivot tonearm
SIGNATURE 10 - 10" precision single-pivot tonearm
SIGNATURE 12 - 12" precision single-pivot tonearm
• Single pivot design with minimised bearing fric on • Non magne c low resonance construc on
• Fits low to high cartridge mass, including 32gr. SPU • High rigidity aluminium headshell (12gr)
with built-in fingerliP included, allows 1/2 inch cartridge mount • High conduc vity OFC
headshell cables included • Azimuth adjustment with screw on side • Built-in 5-pin DIN
connector (tonearm cable not included) • High gloss finish • Measure it, Alignment +
Moun ng distance tools included • Delivered in exclusive wooden jewel box
PRO-JECT SIGNATURE HEADSHELLS
HEADSHELL SIG. ALU HEADSHELL SIG.CARBON
SRP € 125,00
SRP € 99,00
HEADSHELL SIG. WOOD
SRP € 79,00
HEADSHELL SIGNATURE ALU
HEADSHELL SIGNATURE CARBON
HEADSHELL SIGNATURE WOOD
• Ultra rigid resonance op mised construc on • Audiophile-grade wiring • SME standard mount
10
CATALOGUE 2015 · PRO-JECT PHONO
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
Phono cables
CONNECT IT PHONO 5Pin
Length
0,82 m
1,23 m
1,85 m
5P > RCA
5P C
SRP € 69,00
SRP € 79,00
SRP € 99,00
5P CC / 5P XLR CC
SRP € 99,00
SRP € 109,00
SRP € 139,00
5P SI / 5P XLR SI
SRP € 329,00
SRP € 449,00
SRP € 599,00
Phono 5P > RCA C - Electrically shielded with conductors made of OFC (oxygen free copper)
Interconnect cable with earthing wire, 1x 5-pole standard tonearm socket > 2x RCA phono plugs.
Op on: 90° angled or 5-pol. standard tonearm socket.
Phono 5P > RCA or 5P > XLR CC - Electrically shielded with conductors made of OFC (oxygen free
copper) and an addi+onal layer of carbon fibre
Interconnect cable with earthing wire, 1x 5-pole standard tonearm socket > 2x XLR or RCA phono
plugs. Op on: 90° angled or 5-pol. standard tonearm socket.
5P > XLR
Phono 5P > RCA or 5P > XLR SI - Electrically shielded with conductors made of pure silver and RCA
phono plugs with locking func+on
Interconnect cable with earthing wire, 1x 5-pole standard tonearm socket > 2x XLR or RCA phono
plugs. Op on: 90° angled or 5-pol. standard tonearm socket.
CONNECT IT PHONO
Length
0,82 m
1,23 m
1,85 m
RCA C
SRP € 59,00
SRP € 69,00
SRP € 89,00
RCA or XLR CC
SRP € 89,00
SRP € 99,00
SRP € 129,00
RCA or XLR SI
SRP € 299,00
SRP € 399,00
SRP € 599,00
RCA > RCA
Phono RCA > RCA C - Electrically shielded with conductors made of OFC (oxygen free copper)
Interconnect cable with earthing wire, 2x RCA phono plugs > 2x RCA phono plugs.
Phono RCA > RCA or XLR > XLR CC - Electrically shielded with conductors made of OFC (oxygen
free copper) and an addi+onal layer of carbon fibre
Interconnect cable with earthing wire, 2x XLR or RCA phono plugs > 2x XLR or RCA phono plugs.
XLR > XLR
Phono RCA SI / XLR SI - Electrically shielded with conductors made of pure silver and RCA phono
plugs with locking func+on
Interconnect cable with earthing wire, 2x XLR or RCA phono plugs > 2x XLR or RCA phono plugs.
Phono electronics - Elemental line
RECORD BOX E
SRP € 99,00
MM Phono preamplifier with A/D converter and USB output.
• Op mal channel separa on through dual-mono circuitry • Special low-noise ICs used • Gold plated
RCA connec on sockets • Outboard power supply included • Digitalisa on of analogue signals for
recording direct to disk via USB with suitable recording programs • Automa c recogni on, without
addi onal driver, by standard PC • Runs on Windows® and Mac OS® opera ng systems • Small size
allows installa on close to record player • Stylish & robust synthe c casing • Colour op ons: White or
black • Dimensions: 120x32x100 (115)mm WxHxD (D with sockets) • Weight: 250g
PHONO BOX E
SRP € 69,00
MM Phono preamplifier
• Op mal channel separa on through dual-mono circuitry • Special low-noise ICs used • Gold plated
RCA connec on sockets • Outboard power supply included • Amplifica on and RIAA equalisa on for
MM cartridges • Small size allows installa on close to record player • Stylish & robust synthe c casing • Colour op ons: White or black • Dimensions: 120x32x100 (115)mm WxHxD (D with sockets) •
Weight: 250g
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
PRO-JECT PHONO · CATALOGUE 2015
11
Phono electronics - Classic line
PHONO BOX
SRP € 99,00
MM/MC Phono preamp with line output
• Preamplifier for MM or MC with switch on rear panel • Best buy classic • „Green“ DC power supply
(< 1 waC standby power) • Precise RIAA equalisa on • Low noise ICs • Output stage with ultra-low
impedance • Gold-plated RCA sockets • Small size for installa on near record player • Colour op ons:
Silver or black • Dimensions: 103x36x103 (109)mm WxHxD (D with sockets) • Weight: 540g
PHONO BOX USB
SRP € 139,00
MM/MC Phono preamp with line & USB outputs
• Preamplifier for MM or MC with switch on rear panel • „Green“ DC power supply (< 1 waC standby
power) • Precise RIAA equalisa on • High quality A/D conversion with USB out to PC/Mac • Compable with Windows®, Mac OS® • SMD technology for shortest signal paths • Gold-plated RCA sockets • Output stage with ultra-low impedance • Colour op ons: Silver or black • Dimensions:
103x36x103 (109)mm WxHxD (D with sockets) • Weight: 540g
PHONO BOX USB V
SRP € 159,00
MM/MC Phono/line preamp with line & USB outputs
• Preamplifier for MM or MC with switch on rear panel • „green“ DC power supply (< 1 waC standby
power) • Precise RIAA equalisa on • Phono/line selector on front • Record level adjustment • High
quality A/D conversion with USB out to PC/Mac • Compa ble with Windows®, Mac OS® • SMD technology for shortest signal paths • Output stage with ultra-low impedance • Colour op ons: Silver or
black • Dimensions: 103x36x103 (109)mm WxHxD (D with sockets) • Weight: 540g
Phono electronics - S line
PHONO BOX S
SRP € 149,00
„Best Buy“ MM/MC phono preamplifier
• Audiophile Performance • Dual mono configura on • Audiophile-grade amplifica on modules •
Audiophile-grade polypropylene WIMA capacitors • Precise RIAA equalisa on • Switchable Subsonic
filter –12dB @ 20Hz • Switchable input impedance/capacitance • 4 adjustable gain levels • Outstanding sound quality • Metal casing protects against vibra on and interference • Colour op ons:
Silver or black • Dimensions: 103x36x104 (115)mm WxHxD (D with sockets) • Weight: 570g
A/D PHONO BOX S
SRP € 199,00
Analogue to digital converter with digital op+c out (Toslink) & USB out
• MM & MC capable • Linear RIAA equalisa on • Phono stage technology by Dr. Sykora • Line level
input switchable • Recording level control • USB recording output to computer (Win & Mac) • Digital
op c output (Toslink), works while USB is connected • Ultra low noise & low distor on levels • SMD
circuitry • Metal casing protects against vibra on and interference • Small size allows installa on
close to record player • Colour op ons: silver or black • Dimensions: 103x36x104 (115)mm WxHxD (D
with sockets) • Weight: 580g
TUBE BOX S
SRP € 349,00
MM/MC phono preamplifier with tube output stage
• Audiophile Performance • Audiophile-grade ECC83 (12AX7) • Dual mono configura on • Audiophile
-grade polypropylene WIMA capacitors • Precise RIAA equalisa on • Switchable input impedance/
capacitance • 3 adjustable gain levels • Subsonic filter • Outstanding sound quality • Metal casing
protects against vibra on and interference • Colour op ons: Silver or black • Dimensions:
103x74x104 (115)mm WxHxD (D with sockets) • Weight: 810g
SPEED BOX S
SRP € 129,00
Electronic motor control and speed change
• Quartz-generated high precision electronic speed regula on with microprocessor control • Sound
improvement through motor running smoothness • Clean power decoupled from mains interference • Allows electronic speed change 33 & 45 rpm • 78 rpm possible with op onal accessory pulley • Suitable for all turntables with 16 volt AC motor, up to 3 waC max. power consump on • Small
size allows installa on close to record player • Outboard power supply included • Metal casing protects against vibra on and interference • Colour op ons: Silver or black • Dimensions: 103x36x104
(115)mm WxHxD (D with sockets) • Weight: 580g
12
CATALOGUE 2015 · PRO-JECT PHONO
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
MAIA (My audio integrated amplifier)
SRP € 499,00
Stereo integrated amplifier with analogue, digital, Bluetooth inputs & headphone out
• High End integrated amplifier with 3 line, 1 phono (MM), 1 digital coax, 2 digital op c & 1 wireless
high defini on aptX Bluetooth input • 2x 30 waCs @ 4 ohms • XMOS asynchronous USB (24bit /
192kHz) • 24bit / 192kHz D/A converter • Headphone output • Gold plated connectors for line (RCA)
& speakers • IR remote control for volume, input & power • Record out with fixed level • Metal casing protects against vibra on and interference • Colour op ons: silver or black • Dimensions:
206x36x200 (220)mm WxHxD (D with sockets) • Weight: 1850g
MAIA PRE
SRP € 499,00
NEW Stereo preamplifier with analogue, digital, Bluetooth inputs & headphone out
• High End preamplifier with 3 line, 1 phono (MM), 1 digital coax, 2 digital op c & 1 wireless high
defini on aptX Bluetooth input • Output voltage: 2V RMS • Output impedance: 100ohms • XMOS
asynchronous USB (24bit / 192kHz) • 24bit / 192kHz D/A converter • Headphone output • Gold plated connectors for line (RCA) • IR remote control for volume, input & power • Record out with fixed
level • Metal casing protects against vibra on and interference • Colour op ons: silver or black •
Dimensions: 206x36x150 (155)mm WxHxD (D with sockets) • Weight: 1100g
Phono electronics - DS line
PHONO BOX DS
SRP € 249,00
Phono preamplifier
• MM & MC capable • Linear RIAA equalisa on • Ul mate circuit technology from Dr. Sykora, simplified version of Phono Box DS+ without display & relais switching • Ultra low noise & low distor on
levels • SMD circuitry • Subsonic filter (switchable on rear panel) • Substan al setup op ons • Comfortable switching via buCons on front • Metal casing protects against vibra on and interference •
Colour op ons: Silver or black • Dimensions: 103x72x144 (156)mm WxHxD (D with sockets) • Weight:
1100g
PHONO BOX DS +
SRP € 399,00
Phono preamplifier
• MM & MC capable • Linear RIAA equalisa on • Ul mate circuit technology from Dr. Sykora • Ultra
low noise & low distor on levels • Double mono SMD circuitry • Low loss polypropylen capacitors •
Substan al setup op ons • Classy & elegant display shows setup parameters • Relay switching • Metal casing protects against vibra on and interference • Colour op ons: Silver or black • Dimensions:
103x72x144 (156)mm WxHxD (D with sockets) • Weight: 1025g
TUBE BOX DS
SRP € 499,00
MM/MC tube phono preamplifier
• MM & MC support • Precise RIAA equalisa on • Ultra low noise circuitry • 12AX7 tube output stage
with pre-mounted cool dampers• Input impedance adjustment for low output MC on front • Input
capacitance adjustment in 4 steps (MM & Hi-output MC) • Switchable subsonic filter • Gold plated
RCA sockets • Front-sided On/Off switch • Metal casing protects against vibra on and interference •
Colour op ons: Silver or black • Dimensions: 103x72x144 (156)mm WxHxD (D with sockets) • Weight:
1100g
MAIA DS (My audio integrated amplifier)
SRP € 799,00
NEW Stereo integrated amplifier with analogue, digital inputs, headphone out and free control App
• High End integrated amplifier with 3 line, 1 phono (MM/MC), 1 digital coax, 2 digital op c & 1 wireless high defini on aptX Bluetooth input • 2x 60 waCs @ 4 ohms • XMOS asynchronous USB (24bit /
192kHz) • 24bit / 192kHz D/A converter • Headphone output • Gold plated connectors for line (RCA)
& speakers • Controlled via Box Control IT App without any need of WiFi connec on • Also controls
other components like Stream Boxes, CD Boxes and other IR components like TVs and satellite receivers • Metal casing protects against vibra on and interference • Colour op ons: silver or black
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
PRO-JECT PHONO · CATALOGUE 2015
13
SPEED BOX DS
SRP € 399,00
Quartz controlled speed control for turntable for assuring ul+mate speed consistency
• Speed change between 33 and 45rpm • Speed can be altered in graduated steps on either seYng •
Voltage regula on func on • Generated sinus wave voltage decoupled from mains interference •
Outputs: 16V AV and 230V AV (available also in 120V / 60 Hz version) • Only for AC turntables • Metal
casing protects against vibra on and interference • Colour op ons: Silver or black • Dimensions:
103x72x144mm WxHxD • Weight: 1360g
Phono electronics - RS line
PHONO BOX RS
SRP € 799,00
Highend phono preamplifier
• MM & MC capable • Fully balanced double mono design • Fully passive RIAA & DECCA equalisa on • Unique con nuously variable input impedance loading, matches every cartridge (adjustment
even while playing) • RCA & XLR In & Out • Superior low noise / low distor on • Classy & elegant dip
switches • Metal casing protects against vibra on and interference • Colour op ons: Silver or black •
Dimensions: 206x72x200 (210)mm WxHxD (D with sockets) • Weight: 2000g
Op onal Upgrade: Linear power supply Power Box RS Phono for further improved sound quality
POWER BOX RS PHONO
SRP € 499,00
Linear power supply for Phono Box RS with ba=ery power output
• High filtra on capacity • Precise voltage regula on • Surge protec on • Low noise components for
ul mate sound performance • Power Box RS Phono offers virtual baCery power to Phono RS • Metal
casing protects against vibra on and interference • Colour op ons: silver or black • Dimensions:
206x72x195 mm WxHxD • Weight: 2030g
Phono power solu+on - S, DS, RS line
POWER BOX MAIA DS
SRP € 499,00
NEW Linear power supply for MaiA DS and other products of DS-Line, S-Line and turntable
• DC blocking circuitry in primary winding (no mechanical noise generated by transformer, cleaner
energy, beCer sound) • 12V trigger out • 15V / 1A turntable power output (real ground for turntable,
elimina+ng possibility of hum) • Allows simultaneous opera+on of turntable; Phono Box preamplifier plus other products (for further details see www.project-audio.com) • Colour op ons: silver
or black • Dimensions: 206x72x194mm WxHxD
POWER BOX DS SOURCES
SRP € 399,00
NEW Universal linear power supply for 6 components of DS-Line, S-Line and turntable
• DC blocking circuitry in primary winding (no mechanical noise generated by transformer, cleaner
energy, beCer sound) • 12V trigger out • 15V / 1A turntable power output (real ground for turntable, elimina+ng possibility of hum) • Allows simultaneous opera+on of turntable; Phono Box preamplifier plus other products (for further details see www.project-audio.com) ) • Colour op ons:
silver or black • Dimensions: 206x72x194mm WxHxD
POWER BOX MAIA
SRP € 399,00
NEW Linear power supply for MaiA, MaiA CD and turntable
• DC blocking circuitry in primary winding (no mechanical noise generated by transformer, cleaner
energy, beCer sound) • Toroidal transformers • 15V / 1A turntable power output (real ground for
turntable, elimina+ng possibility of hum) • Allows simultaneous opera+on of turntable, Phono Box
pre-amplifier plus other products (for further details see www.project-audio.com) • Colour op ons:
silver or black • Dimensions: 206x72x194mm WxHxD
14
CATALOGUE 2015 · PRO-JECT PHONO
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
POWER BOX RS UNI 4-way
SRP € 599,00
Universal linear power supply for 4 components of RS-Line including turntable
• High filtra on capacity • Precise voltage regula on • Surge protec on • 15V / 1A turntable power
output (real ground for turntable, elimina+ng possibility of hum) using adapter cable Connect it
Power• Allows simultaneous opera+on of turntable, Phono Box RS plus other products (for further
details see www.project-audio.com) • Colour op ons: silver or black • Dimensions: 201x72x195mm
WxHxD (D with sockets) • Weight: 4800g
Connect it Power RS MiniXLR-Phono DC15V 2,1
Available lengths: 0,205m - 1,85m
from SRP € 49,00 to € 60,00
NEW Cable to connect Power Box with Pro-Ject turntables (with 15V DC power supply)
Mini XLR (20V) connector > 2,1mm (15V) connector
Accessories - 78 Rpm
78RPM PULLEY SET 50 OR 60HZ
SRP € 17,00
Pulley + Belt for gramophone playback
Op onal pulley set converts some Pro-Ject turntables for playback of gramophone records. Please
note that a special cartridge stylus may be required
PULLEY SB
SRP € 9,00
Pulley 33 & 45 & 78rpm in combina+on with Speed Box
78rpm possible by replacing original drive pulley for „Pulley SB“ and addi on of Speed Box S (suitable
for turntables with 16V AC motors) or Speed Box SE / DS (suitable for turntables with 230V and 16V
AC motors) • Not usable with all turntables, please consult your Pro-Ject Audio Systems partner
OM78 stylus
2M78 stylus
SRP € 60,00
SRP € 80,00
Recommended styli for gramophone playback
Op onal for OM and 2M cartridges • Only for use with 78rpm gramophone records • Not usable for
standard LPs and singles
Accessories - Adjustment
STROBE IT
SRP € 29,00
Control of turntable speed
• Speed control for 33/45/78 rpm • 50/60 Hz • Cartridge alignment scheme included
ALIGN IT
SRP € 119,00
Cartridge alignment tool
• Tool for cartridge alignment and adjustment • Special slip-proof tool for defining the turning centre
of Pro-Ject Audio Systems' tonearms • Adaptable to accommodate differing tonearm lengths • Suitable for other manufacturers' tonearms • Suitable for tonearms between 8" (203mm) and
12"(305mm) effec ve length
ADJUST IT
SRP € 25,00
Tonearm bearing adjustment tool
• Suitable for all Pro-Ject Audio Systems' tonearms • Allows fine adjustment of bearings, if misadjusted • Cau on: For qualified personnel only • Includes 2 inserts for different bearings • Full metal
(aluminium & brass)
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
PRO-JECT PHONO · CATALOGUE 2015
15
LEVEL IT
SRP € 25,00
Spirit level for op+mum posi+oning of a turntable
• Making sure your turntable is level because this is cri cal for set-up and playback
MEASURE IT II
SRP € 99,00
Electronic stylus balance
• 4 digit LCD-display with backlight • Capacity 0 - 5g • Variance ±0,002g • Auto calibra on funcon • Auto off aPer 120 seconds • Replacement baCeries supplied
Accessories - Sound tuning
LUBE IT
SRP € 17,90
High-tech lubricant
• Constant velocity spindle oil for standard plaCer bearings • 5ml
GREASE IT
SRP € 15,00
NEW High-tech lubricant
• Constant velocity grease for inverted plaCer bearings • 2ml
ACRYL IT
SRP € 109,00
Turntable pla=er
• Suitable for Debut and Xpression turntables • Subs tutes metal plaCer • Inert material avoids resonances • Dent for label implemented • Ideal for use with Clamp it • Audiophile sound tuning • Op cal
upvalua on
ACRYL IT E
SRP € 99,00
Turntable pla=er
• Suitable for Elementa and Essen al turntables • Subs tutes metal plaCer • Inert material avoids
resonances • Dent for label implemented • Ideal for use with Clamp it • Audiophile sound tuning •
Op cal upvalua on
CORK IT
SRP € 19,00
Sound tuning with turntable mats
• Alterna ve plaCer mats with special sound characteris cs • Subs tutes felt mats • Damping of resonances from metal turntable plaCers • Less noise • Avoids sta c load • Suitable for all turntables •
Perfect combined with Clamp it
LEATHER IT
SRP € 49,00
Sound tuning with turntable mats
• Alterna ve plaCer mats with special sound characteristcs • Subs tutes felt mats • Damping of resonances from metal turntable plaCers • Less noise • Avoids sta c load • Suitable for all turntables •
Perfect combined with Clamp it
FELT MAT
SRP € 9,90
Felt mat for Debut turntables
• Individual colours give your turntable a very special appearance • Diameter 280 or 300mm • Different
colours: Black, dark-grey, light-grey, dark-red, red, orange, yellow, light-green, green, blue
CLAMP IT
SRP € 79,00
Record clamp
• Sound improvement for all turntables • Reduces unwanted resonances while playback • Fast and
easy moun ng • Fine-adjustment of thightening force • Full metal accessory with leather coa ng •
Diamond cut finish
RECORD PUCK
SRP € 69,00
Heavy weight record clamp
• Record clamp for fixing of record on the turntable
RECORD PUCK BRASS
SRP € 69,00
Heavy weight record clamp
• Record clamp in brass gold for fixing of record on the turntable
16
CATALOGUE 2015 · PRO-JECT PHONO
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
Accessories - sound tuning
ABSORB IT
4 pcs SRP € 159,00
Highend damping feet
• Special absorber feet made from hightech synthe c material enclosed by metal ring • Prevent
transmission of unwanted mechanical vibra on • Especially designed for CD players and turntables
DAMP IT
1 pc
SRP € 7,99
Highend damping feet
4 pcs SRP € 29,90
• Special absorber feet made from hightech TPE material • Prevent transmission of unwanted mechanical vibra on • Especially for CD and other disc players, tube amplifiers, speakers and turntables
• Single or set of 4
GROUND IT DELUXE
GROUND IT DELUXE 1
GROUND IT DELUXE 2
GROUND IT DELUXE 3
SRP € 299,00
SRP € 299,00
SRP € 499,00
Equipment bases
• Resonance free placement for turntables & Hifi • Heavy weight base filled with granular damping •
2 models with adjustable spikes (3 or 4 may be fiCed) • 1 model with height adjustable magne c
feet • Dark grey piano lacquer finish • Matches charcoal finish of Pro-Ject turntables • Ground it deluxe 1: Dimension: 500 x 65 (45)x 400mm incl spikes (without spikes) Weight: 11,6 kg • Ground it
deluxe 2: Dimension: 435 x 65 (45)x 340mm incl. spikes (without spikes) Weight: 8,5 kg • Ground it
deluxe 3: Dimension: 500 x 65 (45) x 400mm incl. feet (without feet) Weight: 13,5 kg
WALLMOUNT IT 1
SRP € 129,00
Wall mount equipment rack
• Welded steel frame construc on, maC black finish • Veneered wooden board, black finish • Four
height-adjustable spikes to level the board • Surface area (W x D): 460 x 355mm • Overall dimensions
(W x H x D): 460 x 90 x 415mm
WALLMOUNT IT 2
SRP € 159,00
Wall mount equipment rack
• Welded steel frame construc on, maC black finish • Veneered wooden board, black finish • Four
height-adjustable spikes to level the board • Surface area (W x D): 460 x 355mm • Overall dimensions
(W x H x D): 460 x 260 x 455mm
WALLMOUNT IT 3
SRP € 299,00
Wall mount equipment rack
• Screwed steel construc on, maC black finish • Lacquered MDF board, maC black • Three heightadjustable spikes to level the board • Surface area (W x D): 520 x 450mm • Overall dimensions (W x H
x D): 635 x 290 x 455mm
WALLMOUNT IT 5
SRP € 199,00
Wall mount equipment rack
• Resonance-free wall mount for turntables & Hifi • Playback of records free from any influence by
impact noise and vibra ng floors • WMI wall mounts use rigid steel frame construc on • Heightadjustable spikes to level the board • Maximum load of 30kg • Can also be mounted on thin or american type plywood walls (Firmness depends on wall and moun ng accessories), because massloaded
internal damping absorbs resonances • Wood finish: either black or walnut • Surface area (W x D):
460 x 400mm • Overall dimensions (W x H x D): 460 x 60 x 425mm
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
PRO-JECT PHONO · CATALOGUE 2015
17
Accessories - Miscellaneous
RACK IT
RACK IT CUBE (MATT)
RACK IT CUBE (HIGH GLOSS)
RACK IT SHELF (MATT)
RACK IT SHELF (HIGH GLOSS)
NEW Universal storage system for Box Design components and music media
• Lifestyle rack system • Stackable plaOorm for turntables, Box Design components etc • Easy to
mount • 1 Rack it Cube holds approximately 150 LPs • Basic Cube can be equipped with op onal
shelves • Shelves include moun ng tools • Colour op ons: white, white HG, red HG, black, black
HG, champagne HG, green HG, grey HG, yellow HG • Dimensions Rack it Cube 535 x 376 x 440 mm
(WxHxD) • Dimensions Rack it Shelves 485 x 7 x 380 mm (WxHxD)
1 piece Rack it Cube to store Vinyl records
Rack it Cube with Rack it Shelves to store MaiA,
MaiA CD (including power supplies) and CDs
535mm
PLAY & DISPLAY
44
0m
m
376mm
Lifestyle combina on of
3 pcs Rack it Cube with Rack it Shelves
(1pc.) SRP € 109,00
(1pc.) SRP € 250,00
(1pc.) SRP € 25,00
(1pc.) SRP € 39,00
(1 pc.) SRP € 49,00
(3 pc.) SRP € 139,00:
12‘‘ Vinyl display frame
• Stylish hifi accessory for vinyl lovers • First ever vinyl display frame that can have its contents
changed without being removed from the wall • Any space can be personalised in seconds • Bri sh
Design Classic • Interna onally patented • Beau fully packaged for instant giPing • UV resistant •
Renewed enjoyment to record collec ons • Customer friendly priced single and triple packs
COVER IT
NEW COVER IT Signature 12
COVER IT 1
COVER IT 2.1
COVER IT RPM 9/9.1
COVER IT RPM 1/5
NEW COVER IT E (suits Elemental)
SRP € 299,00
SRP € 249,00
SRP € 199,00
SRP € 99,00
SRP € 79,00
SRP € 79,00
Universal dust cover
• Crystal clear acrylic cover for turntables • Protects turntable and needle • Cover it 1 suits Ground
it deluxe 1 • Cover it 2.1 suits Ground it deluxe 2 & 3
ADAPT IT
SRP € 19,00
Single puck
• Adaptor for use with 7-inch single records • Locates record centrally on turntable • No plas c precision CNC-machined • Non-magne c aluminium • Suitable for all brands and types of record
players • 2 colour op ons: Black or blue
Q UP
SRP € 59,00
Automa+c tonearm liTer for manual turntables
• LiPs tonearm, when it moves to the end of a record • Extends stylus life • Suits nearly all tonearms
and manual turntables • Includes three stackable plaOorms for turntables with thick plaCers • Adjustable trigger sensi vity • No AC or baCery power needed • Easy to mount, no addi onal tools
necessary
18
CATALOGUE 2015 · PRO-JECT PHONO
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
Accessories - Cleaning
BRUSH IT
SRP € 15,00
Carbon fibre brush for record cleaning
• An sta c record cleaner • Conduc ve carbon fibers • Eliminates sta c charges • Removes finest
dust par cles
CLEAN IT
SRP € 10,00
Carbon fibre stylus cleaning brush
• Smooth cleaner for diamant stylus • Conduc ve carbon fibers • Eliminates sta c charges • Removes finest dust par cles
SPIN-CLEAN®
SPIN-CLEAN RECORD WASHER SYSTEM MKII
SPIN-CLEAN RECORD WASHER MKII PACKAGE
SPIN-CLEAN RECORD WASHER MKII PACKAGE - LIMITED EDITION
SRP € 99,00
SRP € 165,00
SRP € 199,00
Record washer
Clean your valuable vinyls gentle, but efficient! Clean records sound much beCer and help to protect
the stylus from dust. Spin Clean clears manually and is suitable for all kinds of records: LP‘s, 45‘s, 78‘s
Spin Clean Record washer system includes all necessary parts: 4 oz. (118ml) washer fluid, 2 brushes
and dryer cloths. Of course all components of Spin-Clean are available as accessory!
SPIN-CLEAN® WASHER FLUID
SPIN-CLEAN WASHER FLUID 8 OZ (237 ML)
SPIN-CLEAN WASHER FLUID 16 OZ (473 ML)
SPIN-CLEAN WASHER FLUID 32 OZ (946 ML)
SRP € 17,00
SRP € 25,00
SRP € 37,00
SPIN-CLEAN® BRUSHES (ONE PAIR)
SRP € 30,00
Replacement brushes
SPIN-CLEAN® ROLLERS (ONE PAIR)
SRP € 25,00
Replacement rollers
SPIN-CLEAN® DRYING CLOTHS (5-PACK)
SRP € 20,00
Washable dry cloths
VINYL CLEANER VC-S
SRP € 499,00
NEW Automa+c cleaning machine for vinyl records
• Smooth and efficient cleaner for vinyl records • Cleaning side by side • Quick and gentle cleaning
preserves value of your record collec on • Removes finest dust and grease
SRPs are only for orientation, prices can differ depending on local taxes
Prices, technical data & release date without engagement
PRO-JECT PHONO · CATALOGUE 2015
19
PALISANDER MATT
WALNUT MATT
EUCALYPTUS MATT
PRO-JECT AUDIO SYSTEMS a division of Audio Tuning Vertriebs GmbH · Margaretenstraße 98 · A-1050 Wien, AUSTRIA
Phone: +43 1 5448580 · Fax: +43 1 5448580-33 · e-mail: [email protected] · www.project-audio.com
© Pro-Ject Audio Systems 2015, English version
Technical data without engagement
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement