BMWhat Coding List for BMW E60, as of Febr 2015

BMWhat Coding List for BMW E60, as of Febr 2015
BMWhat Coding List for BMW E60, as of Febr 2015
CAS: Comfort start
active
not active
BMWhat: Ignition key just has to be tapped once to start the engine after ignition is turned on.
CAS: Comfort eject
active
not active
BMWhat: Turn off the ignition with a long press on the start/stop button in order to eject the ignition
key.
CAS: Comfort open using remote
active
not active
BMWhat: Press and hold the unlock button on the remote to open all windows and the sunroof.
CAS: Comfort close using remote
active
not active
BMWhat: Press and hold the lock button on the remote to close all windows and the sunroof.
CAS: Comfort close using door handle (comfort access)
active
not active
BMWhat: Use comfort closing features when locking with the door handle. This only works if comfort
access is installed.
CAS: Comfort open using keylocks
active
not active
BMWhat: Unlock the car by key and hold the key in the unlock position to open all windows and the
sunroof.
CAS: Comfort close using keylocks
active
not active
BMWhat: Lock the car by key and hold the key in the lock position to close all windows and the
sunroof.
CAS: Power windows after ignition off
active
not active
BMWhat: Power windows are active for another minute after ignition is turned off.
CAS: Power windows after ignition off duration
1 min
2 min
5 min
10 min
15 min
BMWhat: Duration in minutes, for which power windows are active after turning off the ignition.
CAS: Easy entry
active
not active
BMWhat: Press the unlock button once to unlock all doors. Press it again to lower the driver side
window.
CAS: Easy entry Key 1
active
not active
BMWhat: Separate setting for "Easy entry" for key 1. Press the unlock button once to unlock all doors.
Press it again to lower the driver side window.
CAS: Easy entry Key 2 - 4
active
not active
BMWhat: Separate setting for "Easy entry" for key 2 - 4. Press the unlock button once to unlock all
doors. Press it again to lower the driver side window.
CAS: Selective central locking
active
not active
BMWhat: Unlocking the car once only unlocks the driver"s door. Unlocking it again unlocks the other
doors, too.
CAS: Selective central locking Key 1
active
not active
BMWhat: Separate setting for "Selective central locking" for key 1. Unlocking the car once only
unlocks the driver"s door. Unlocking it again unlocks the other doors, too.
CAS: Selective central locking Key 2 - 4
active
not active
BMWhat: Separate setting for "Selective central locking" for key 2 - 4. Unlocking the car once only
unlocks the driver"s door. Unlocking it again unlocks the other doors, too.
CAS: Selective central locking - unlock fuel lid
active
not active
BMWhat: The fuel lid is also unlocked upon the first unlock, when "Selective central locking" is
active.
CAS: Automatically lock vehicle duration
1 min
2 min
5 min
10 min
15 min
BMWhat: Duration in minutes until doors are locked after car was unlocked but no windows or doors
have been opened.
CAS: Automatically lock vehicle Key 1 - 4
active
not active
BMWhat: Separate setting for "Automatically lock vehicle" for key 1. If no door or window has been
opened two minutes after the car has been unlocked, the doors automatically lock.
CAS: Lock vehicle upon ignition
active
not active
BMWhat: Vehicle is locked, when ignition is turned on.
CAS: Unlock car when turned off
active
not active
BMWhat: Doors are automatically unlocked, when ignition key is ejected. Only works if "Lock vehicle
at x kph Key 1-4" is activated.
CAS: Threshold speed for vehicle locking
2 kph / 1 mph
6 kph / 4 mph
12 kph / 8 mph
18 kph / 11 mph
24 kph / 15 mph
30 kph / 19 mph
BMWhat: Sets the speed at which the vehicle automatically locks all doors. For models other than E46
values 1 to 6 mean the following: 4 kph, 8kph, 12 kph, 20 kph, 24 kph, 28 kph To activate this function
you need to activate "Lock vehicle at x kph" for the according keys.
CAS: Lock vehicle at x kph Key 1 - 4
active
not active
BMWhat: Automatically lock the vehicle at the set threshold speed when key 1 – 4 is used.
CAS: Interior lights with remote
active
not active
BMWhat: Pressing the lock button on the remote, when the car is already locked, turns on the interior
lights.
CAS: Panic mode remote
active
not active
BMWhat: Press and hold the "unlock trunk" button to trigger the alarm.
CAS: Prohibit engine start without brake
active
not active
BMWhat: Engine can"t be started when brake is not pressed.
CAS: Arm/Disarm Anti-Theft Alarm System
Only with remote
With locks and remote
BMWhat: Anti-theft alarm system is armed/disarmed by locking/unlocking the car (1) with the locks
and the remote or (2) only by locking/unlocking the car with the remote.
IHKA: Save circulation settings
active
not active
BMWhat: Circulation settings are saved for next start of the vehicle.
IHKA: Air conditioning engine speed
active
not active
BMWhat: Increase idle engine speed when air conditioning is turned on.
IHKA: Blower level during automatic air conditioning
active
not active
BMWhat: The current blower level is displayed even during automatic mode of the air conditioning.
IHKA: Automatic compressor with air conditioning
active
not active
BMWhat: When pressing the "Automatic" button for air conditioning, the compressor for air
conditioning does not start by itself.
IHKA: Ventilation in off-mode
active
not active
BMWhat: Ventilation blows on smallest level, when air conditioning is in off-mode.
IHKA: Off-Mode Memory Key 1 - 4
active
not active
BMWhat: Save setting for "Off-mode" for the air conditioning. Separate setting for key 1 - 4.
KOMBI: Digital speedometer
active
not active
BMWhat: Digital speedometer is displayed in dashboard.
KOMBI: Digital speedometer correction
active
not active
BMWhat: Active: corrected speed is displayed in dashboard Inactive: true speed is displayed in
dashboard
KOMBI: Speedometer correction
active
not active
BMWhat: Active: corrected speed is displayed in dashboard Inactive: true speed is displayed in
dashboard/nDoes not work on US models.
KOMBI: Speed limit warning
not active
120 kph / 75 mph
190 kph / 120 mph
210 kph / 130 mph
240 kph / 150 mph
BMWhat: Speed limit warning at 120 kph is active/not active.
KOMBI: GPS time correction
active
not active
BMWhat: Time of day is corrected by using GPS.
KOMBI: Blank line in dashboard
active
not active
BMWhat: Blank line in dashboard is displayed/not displayed.
KOMBI: Permanent speedometer lighting
active
not active
BMWhat: Speedometer is always lit, even in the daytime.
KOMBI: Ignition key warning
active
not active
BMWhat: Ignition key warning active/not active.
KOMBI: Seat belt warning
active
not active
BMWhat: Various settings for the seat belt warning.
KOMBI: Seat belt reminder driver
active
not active
BMWhat: Seat belt reminder for driver is active/ inactive.
KOMBI: Seat belt reminder passenger
active
not active
BMWhat: Seat belt reminder for passenger is active/ inactive.
KOMBI: Cruise Control speed display
0s
4s
6s
BMWhat: The set speed of the cruise control is shown for a couple of seconds in the on board
computer.
KOMBI: Threshold for low range warning
off
20 km / 12 mi
50 km / 31 mi
BMWhat: Threshold for acoustic low range warning due to low fuel level.
KOMBI: Threshold for tank reserve warning
6.5 litres
8 litres
10 litres
12.5 litres
20 litres
BMWhat: Threshold for tank reserve warning due to low fuel level.
LMA: Flasher with bi-xenon
active
not active
BMWhat: Bi-xenon lamps are used for flasher.
LMA: Front fog lights and high beams not simultaneously
active
not active
BMWhat: Front fog lights are automatically turned off when activating high beams.
LMA: Front fog lights and flasher not simultaneously
active
not active
BMWhat: Front fog lights are automatically turned off when activating flasher.
LMA: Comfort standing light
active
not active
BMWhat: If the light switch is set at automatic or on, the parking lights remain on, until the vehicle is
locked with the remote.
LMA: Lights-on warning
active
not active
BMWhat: A warning is shown, when the driver"s door is opened while the lights are still on.
LMA: Hazard lights
standard
double
BMWhat: Hazard lights blink once or twice.
LMA: Crash lights
standard
double
BMWhat: Hazard lights blink once or twice upon an accident.
LMA: One-touch turn signal function
1
3
5
BMWhat: Number of turn signals when tapping the turn signal.
LMA: One-touch turn signal function Key 1 - 4
1
3
5
BMWhat: Number of turn signals when tapping the turn signal. Separate setting for "One-touch turn
signal function" for key 1 – 4.
LMA: Optical confirmation for locking vehicle
active
not active
BMWhat: Optical confirmation for locking vehicle is active/not active.
LMA: Optical confirmation for locking vehicle Key 1 - 3
active
not active
BMWhat: Optical confirmation for locking vehicle is active/not active. Separate setting for "Optical
confirmation for locking" for key 1 – 3.
LMA: Optical confirmation for unlocking vehicle
active
not active
BMWhat: Optical confirmation for unlocking vehicle is active/not active.
LMA: Optical confirmation for unlocking vehicle Key 1 - 3
active
not active
BMWhat: Optical confirmation for unlocking vehicle is active/not active. Separate setting for "Optical
confirmation for unlocking" for key 1 - 3.
LMA: Brake force display
active
not active
BMWhat: Brake lights turn on or flash when braking hard.
LMA: Brake force display - tail lights
on
flashing
BMWhat: Customization for tail lights for brake force display.
LMA: Brake force display - angel eyes
off
on
flashing
BMWhat: Customization for angel eyes for brake force display.
LMA: Brake force display - outer brake lights
off
on
flashing
BMWhat: Customization for outer brake lights for brake force display.
LMA: Brake force display - inner brake lights
off
on
flashing
BMWhat: Customization for inner brake lights for brake force display.
LMA: Brake force display - rear fog lights
off
on
flashing
BMWhat: Customization for rear fog lights for brake force display.
LMA: Daytime running lights (US) customization
not active
dimmed turn signals
dimmed high beams
BMWhat: Customization of the US daytime running lights. Brightness can be set with "Daytime
running lights (US) brightness".
LMA: Daytime running lights (US) brightness
low
medium
high
BMWhat: Brightness for dimmed US daytime running lights. To use this function, also activate
"Daytime running lights (US)".
LMA: Daytime running lights customization
Off
Individual
High beams
Low beams
Corona-rings/Angel-eyes (EU)
BMWhat: Customization of the daytime running lights. For Corona-rings/Angel-eyes also activate
"Daytime running lights (Europe)".
LMA: Daytime running lights - front fog lights
active
not active
BMWhat: Use front fog lights as daytime running lights. To activate this function, set "Daytime
running lights customization" to "Individual".
LMA: Daytime running lights - dimmed turn signals
active
not active
BMWhat: Use dimmed turn signals as daytime running lights. To activate this function, set "Daytime
running lights customization" to "Individual".
LMA: Daytime running lights - sidemarker
active
not active
BMWhat: Use sidemarker as daytime running lights. To activate this function, set "Daytime running
lights customization" to "Individual".
LMA: Daytime running lights - number plate lighting
active
not active
BMWhat: Use number plate lighting as daytime running lights. To activate this function, set "Daytime
running lights customization" to "Individual".
LMA: Daytime running lights - tail lights
active
not active
BMWhat: Use tail lights as daytime running lights. To activate this function, set "Daytime running
lights customization" to "Individual".
LMA: Daytime running lights - angel eyes
active
not active
BMWhat: Use angel eyes as daytime running lights. To activate this function, set "Daytime running
lights customization" to "Individual".
LMA: Daytime running lights - brake lights
active
not active
BMWhat: Use brake lights as daytime running lights. To activate this function, set "Daytime running
lights customization" to "Individual".
LMA: Daytime running lights - high beams
active
not active
BMWhat: Use high beams as daytime running lights. To activate this function, set "Daytime running
lights" to "High beams".
LMA: Daytime running lights - high beams brightness
very low
low
medium
high
BMWhat: Brightness for "Daytime running lights high beams".
LMA: Daytime running lights - Corona rings brightness
off
very low (standard)
low
medium
high
very high
BMWhat: Brightness of Corona rings for daytime running lights.
LMA: Parking lights - Corona rings brightness
off
very low (standard)
low
rather low
rather high
high
very high
BMWhat: Brightness of Corona rings for parking lights.
LMA: Angel Eyes voltage monitoring 1/2
active
not active
BMWhat: Voltage monitoring for angel eyes. Might cause flickering of LED lights.
LMA: Angel Eyes voltage monitoring 2/2
active
not active
BMWhat: Deactivate with "Angel Eyes voltage monitoring 1/2" to disable flickering of LED lights.
LMA: Angel Eyes warning
active
not active
BMWhat: Warning for malfunction of angel eyes in the on board computer.
LMA: Sidemarker (US)
active
not active
BMWhat: Sidemarkers are permanently active. May need additional "Sidemarker (US)" functions set
to "active" if available.
LMA: Daytime running lights turn signals brightness (US)
off
low
medium
high
BMWhat: Brightness for "Daytime running lights turn signals (US)".
LMA: Sidemarker voltage monitoring 1/2
active
not active
BMWhat: Voltage monitoring for sidemarkers. Might cause flickering of LED lights.
LMA: Sidemarker voltage monitoring 2/2
active
not active
BMWhat: Deactivate with "Sidemarker voltage monitoring 1/2" to disable flickering of LED lights.
LMA: Turn signals front voltage monitoring 1/2
active
not active
BMWhat: Voltage monitoring for turn signals front. Might cause flickering of LED lights.
LMA: Turn signals front voltage monitoring 2/2
active
not active
BMWhat: Deactivate with "Turn signals front voltage monitoring 1/2" to disable flickering of LED
lights.
LMA: Turn signals warning
active
not active
BMWhat: Warning for malfunction of turn signals in on the board computer.
LMA: Fog lights voltage monitoring 1/2
active
not active
BMWhat: Voltage monitoring for fog lights. Might cause flickering of LED lights.
LMA: Fog lights voltage monitoring 2/2
active
not active
BMWhat: Deactivate with "Fog lights voltage monitoring 1/2" to disable flickering of LED lights.
LMA: Low beams voltage monitoring 1/2
active
not active
BMWhat: Voltage monitoring for low beams. Might cause flickering of LED lights.
LMA: Low beams voltage monitoring 2/2
active
not active
BMWhat: Deactivate with "Low beams voltage monitoring 1/2" to disable flickering of LED lights.
LMA: Turn signals rear voltage monitoring 1/2
active
not active
BMWhat: Voltage monitoring for turn signals rear. Might cause flickering of LED lights.
LMA: Turn signals rear voltage monitoring 2/2
active
not active
BMWhat: Deactivate with "Turn signals rear voltage monitoring 1/2" to disable flickering of LED
lights.
LMA: Braking lights voltage monitoring 1/2
active
not active
BMWhat: Voltage monitoring for braking lights. Might cause flickering of LED lights.
LMA: Braking lights voltage monitoring 2/2
active
not active
BMWhat: Deactivate with "Braking lights voltage monitoring 1/2" to disable flickering of LED lights.
LMA: Braking lights warning
active
not active
BMWhat: Warning for malfunction of brakinglights in the on board computer.
LMA: Tail lights voltage monitoring 1/2
active
not active
BMWhat: Voltage monitoring for tail lights. Might cause flickering of LED lights.
LMA: Tail lights voltage monitoring 2/2
active
not active
BMWhat: Deactivate with "Tail lights voltage monitoring 1/2" to disable flickering of LED lights.
LMA: Reversing lights voltage monitoring 1/2
active
not active
BMWhat: Voltage monitoring for reversing lights. Might cause flickering of LED lights.
LMA: Reversing lights voltage monitoring 2/2
active
not active
BMWhat: Deactivate with "Reversing lights voltage monitoring 1/2" to disable flickering of LED
lights.
LMA: License plate lighting voltage monitoring 1/2
active
not active
BMWhat: Voltage monitoring for license plate lighting. Might cause flickering of LED lights.
LMA: License plate lighting voltage monitoring 2/2
active
not active
BMWhat: Deactivate with "License plate lighting voltage monitoring 1/2" to disable flickering of LED
lights.
LMA: Activate follow me home lights
active
not active
BMWhat: Follow me home lights are active/not active.
LMA: Follow me home lights duration
off
40s
90s
150s
240s
BMWhat: Duration of follow me home lights in seconds. To activate follow me home lights, activate
the flasher, while the enginge is off.
LMA: Follow me home lights duration Key 1 - 3
off
40s
90s
150s
240s
BMWhat: Separate setting for duration in seconds of follow me home lights for key 1 - 3.
LMA: Follow me home lights with remote
active
not active
BMWhat: Quickly press the "Open trunk" button twice to activate the follow me home lights. Under
some circumstances the function "Panic mode remote" in the CAS has to be activated, too.
LMA: Cancel follow me home lights
active
not active
BMWhat: Follow me home lights are cancelled, when activating the flasher again.
LMA: Extend follow me home lights
active
not active
BMWhat: Follow me home lights are displayed longer, when activating the flasher again.
LMA: Follow me home lights - dashboard lights
active
not active
BMWhat: Follow me home lights for dashboard instruments are active/not active.
LMA: Follow me home lights - low beams
active
not active
BMWhat: Follow me home lights for low beams are active/not active.
LMA: Follow me home lights - turn signals
active
not active
BMWhat: Follow me home lights for turn signals are active/not active.
LMA: Follow me home lights - turn signals rear
active
not active
BMWhat: Follow me home lights for turn signals rear are active/not active.
LMA: Follow me home lights - turn signals front
active
not active
BMWhat: Follow me home lights for turn signals front are active/not active.
LMA: Follow me home lights - high beams
active
not active
BMWhat: Follow me home lights for high beams are active/not active.
LMA: Follow me home lights - number plates
active
not active
BMWhat: Follow me home lights for number plates are active/not active.
LMA: Follow me home lights - fog lights rear
active
not active
BMWhat: Follow me home lights for fog lights rear are active/not active.
LMA: Follow me home lights - fog lights front
active
not active
BMWhat: Follow me home lights for fog lights front are active/not active.
LMA: Follow me home lights - reversing lights
active
not active
BMWhat: Follow me home lights for reversing lights are active/not active.
LMA: Follow me home lights - tail lights
active
not active
BMWhat: Follow me home lights for tail lights are active/not active.
LMA: Follow me home lights - inner tail lights
active
not active
BMWhat: Follow me home lights for inner tail lights are active/not active.
LMA: Follow me home lights - parking lights
active
not active
BMWhat: Follow me home lights for parking lights are active/not active.
LMA: Welcome lights
active
not active
BMWhat: Welcome lights are turned on, when vehicle is unlocked. In order for the welcome light to
work, the light switch in the car has to be set to "Auto".
LMA: Welcome lights Key 1 - 4
active
not active
BMWhat: Separate setting for "Welcome lights" for key 1 - 4.
LMA: Welcome lights duration
off
5s
10s
20s
40s
90s
BMWhat: Duration of the welcome lights in seconds.
LMA: Welcome lights - low beams
not active
turn on softly
turn on hard
BMWhat: Low beams are turned on with welcome lights.
LMA: Welcome lights - braking lights
not active
turn on softly
turn on hard
BMWhat: Braking lights are turned on with welcome lights.
LMA: Welcome lights - turn signals front
not active
turn on softly
turn on hard
BMWhat: Turn signals front are turned on with welcome lights. To activate this function you may need
to additionally code "Sidemarker (US) brightness" to "very low" or higher.
LMA: Welcome lights - turn signals rear
not active
turn on softly
turn on hard
BMWhat: Turn signals rear are turned on with welcome lights. To activate this function you may need
to additionally code "Sidemarker (US) brightness" to "very low" or higher.
LMA: Welcome lights - high beams
not active
turn on softly
turn on hard
BMWhat: High beams are turned on with welcome lights.
LMA: Welcome lights - number plate lighting
not active
turn on softly
turn on hard
BMWhat: Number plate lights are turned on with welcome lights.
LMA: Welcome lights - front fog lights
not active
turn on softly
turn on hard
BMWhat: Front fog lights are turned on with welcome lights.
LMA: Welcome lights - rear fog lights
not active
turn on softly
turn on hard
BMWhat: Rear fog lights are turned on with welcome lights.
LMA: Welcome lights - corner LEDs
not active
turn on softly
turn on hard
BMWhat: Corner LEDs are turned on with welcome lights. Due to the way LEDs work, it is not
possible to softly turn them on.
LMA: Welcome lights - parking lights front
not active
turn on softly
turn on hard
BMWhat: Parking lights front are turned on with welcome lights.
LMA: Welcome lights - parking lights rear
not active
turn on softly
turn on hard
BMWhat: Parking lights rear are turned on with welcome lights.
LMA: Welcome lights - eyebrow lights
not active
turn on softly
turn on hard
BMWhat: Eyebrow lights are turned on with welcome lights.
CSM: Seat belt warning
active
not active
BMWhat: Various settings for the seat belt warning.
CSM: Seat belt reminder driver
active
not active
BMWhat: Seat belt reminder for driver is active/ inactive.
CSM: Seat belt reminder passenger
active
not active
BMWhat: Seat belt reminder for passenger is active/ inactive.
DWA: Panic alarm
active
not active
BMWhat: Trigger alarm by pressing and holding the "unlock tailgate" button on the remote.
DWA: Audible confirmation for locking vehicle
active
not active
BMWhat: Audible confirmation for locking vehicle is active/not active. Only works if "Anti Theft
System" is set to "active".
DWA: Audible confirmation for unlocking vehicle
active
not active
BMWhat: Audible confirmation for unlocking vehicle is active/not active. Only works if "Anti Theft
System" is set to "active".
DWA: Optical confirmation for locking vehicle
active
not active
BMWhat: Optical confirmation for locking vehicle is active/not active. Only works if "Anti Theft
System" is set to "active".
DWA: Optical confirmation for unlocking vehicle
active
not active
BMWhat: Optical confirmation for unlocking vehicle is active/not active. Only works if "Anti Theft
System" is set to "active".
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising