DWL-3200AP Dynamic VLAN function

DWL-3200AP Dynamic VLAN function
DWL-3200AP Dynamic VLAN function
1. Network topology :
To use the Dynamic Vlan function on DWL-3200AP, you will need a Radius server
which support IEEE 802.1x, a switch that support 802.1Q VLAN; DWL-3200AP at least
firmware version 2.45 rc266, a wireless adapter that support WPA-EAP encryption.
2. Configure Radius Server:
Here we use Windows IAS Radius Server for setup example.
a. Create a Radius client on IAS server, and configure the IP address as the DWL3200AP’s IP address.
b. Create the Remote Access Policy for wireless clients:
c. Add three attributes in the remote policy:
Attribute name: “Tunnel-Medium-Type”, Value: “802(includes all 802midea plus
Ethernet canonical format)”
Attribute name: “Tunnel-Pvt-Group-ID”, Value= the VID value which you want to give
to the user.
Attribute name: “Tunnel-Type”, Value: “Virtual LANs (VLAN)”
Note: the value of attribute “Tunnel-Pvt-Group-ID” is hexadecimal, please set a correct
VID value.
d. Create remote login user.
3. Configure DES-3828P as below shows:
DES-3800:admin#show vlan
Command: show vlan
VID
:1
VLAN Name
VLAN TYPE
: static
Member ports
: 1,23-28
Advertisement : Enabled
Static ports : 1,23-28
Current Tagged ports :
Current Untagged ports : 1,23-28
Static Tagged ports :
Static Untagged ports : 1,23-28
Forbidden ports :
: default
VID
: 10
VLAN Name
VLAN TYPE
: static
: vlan10
Advertisement : Disabled
Member ports : 1-8
Static ports : 1-8
Current Tagged ports : 1
Current Untagged ports : 2-8
Static Tagged ports : 1
Static Untagged ports : 2-8
Forbidden ports :
VID
: 20
VLAN Name
VLAN TYPE
: static
: vlan20
Advertisement : Disabled
Member ports : 1,9-16
Static ports : 1,9-16
Current Tagged ports : 1
Current Untagged ports : 9-16
Static Tagged ports : 1
Static Untagged ports : 9-16
Forbidden ports :
VID
: 30
VLAN Name
VLAN TYPE
: static
Member ports
: 1,17-22
Static ports : 1,17-22
: vlan30
Advertisement : Disabled
Current Tagged ports : 1
Current Untagged ports : 17-22
Static Tagged ports : 1
Static Untagged ports : 17-22
Forbidden ports :
Total Entries : 4
DES-3800:admin#
4. Configure DWL-3200AP :
a. Set the Authentication of Primary SSID as WPA/WPA2 Enterprise.
b. Enable Multiple SSID function, select the “Enable the VLAN Status” option, choose
“Dynamic” from “VLAN ID” option, then configure the other Multi-SSID that you need.
5. Result:
Connect DWL-3200AP to DES-3828P port 1, connect Radius server to DES-3828P port
23; connect the Laptop to DWL-3200AP primary SSID, after passing the authentication
of the Radius server, the Laptop will automatically be assigned to the vlan which you
configured in radius server.
Made by Y.C. Ting
2008/04/30
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising