Machines - Alphaweld

Machines - Alphaweld
Machines
3
Weldmax Machines
Cebora Machines
Ensitech Machines
Hypertherm Machines
Lincoln Electric Machines
Mosa Engine Welders
Unimig Machines
Tungsten Grinding Machines
Stud Welding Machines
Fume Extractor Machines
Magnetic Drilling Machines
Core Drills
60 – 63
64 – 65
66 – 67
68 – 69
70 – 74
75 – 76
77 – 79
80
81 – 83
84 – 86
87 – 90
91 – 92
Machines WELDMAX Mig Welders
Section 3
Machines
WELDMAX Mig Welder 255S
The WELDMAX 255S is a single phase
(multi voltage) power source suited to
medium level workshops. Ideally, these
machines are suitable for light-medium
fabrication & maintenance applications.
Duty Cycles
250amp @ 30%
175amp @ 60%
135amp @ 100%
Tested over 4 hour cycle
Part No.
KWM255SWF
FEATURES
• Geared drive & pressure rollers
• 14 Voltage settings
• Euro torch connection
• 8m Interconnecting leads on SWF
models
• Overtemp protection
• Reverse polarity for gas or gasless
wire
• Trigger catch, spot & stitch control
• Fan cooled
• 5 Year Transformer & choke
warranty
• 2 Year PCB & rectifier warranty
• 1 Year warranty on most other
components
SPECIFICATIONS
Hard Wire Sizes
0.6 / 0.8mm V
0.9 / 1.0mm V
1.0 / 1.2mm V
Soft Wire Sizes
0.9 / 1.0mm U
1.0 / 1.2mm U
1.2 / 1.6mm U
Cored Wire Sizes
0.9 / 1.0mm knurled
1.2 / 1.6mm knurled
Dimensions (mm)
76kg 810L x 410W x 620H
Weight (kg): 76
Description
Mig Welder 255A with Separate Wire Feeder
Voltage
240V
WELDMAX Mig Welder 350S
The WELDMAX 350S mig welding
machines offer excellent arc
characteristics & unsurpassed value.
They are perfect for all materials and
can perform difficult tasks with ease.
The 350 range is the answer for those
who require smooth, low spatter
welding on all tasks from sheetmetal to
heavy fabrications.
Duty Cycles
335amp @ 60%
260amp @ 100%
Tested over 4 hour cycle
Part No.
KWM350SWF
Description
Mig Welder 350A with Separate Wire Feeder
Voltage
415V
The WELDMAX 335S is designed &
built to cater for heavier fabrication
and maintenance applications where
performance and finish is a priority.
These machines offer exceptional
welding characteristics, on a wide
range of materials.
Duty Cycles
FEATURES
• Geared drive & pressure rollers
• 20 Voltage settings
• Euro torch connection
• 8m Interconnecting leads on SWF
models
• Overtemp protection
• Reverse polarity for gas or gasless
wire
• Fan cooled
• 5 Year Transformer & choke
warranty
• 2 Year PCB & rectifier warranty
• 1 Year warranty on most other
components
SPECIFICATIONS
Hard Wire Sizes
0.6 / 0.8mm V
0.9 / 1.0mm V
1.0 / 1.2mm V
Soft Wire Sizes
0.9 / 1.0mm U
1.2 / 1.6mm U
Cored Wire Sizes
0.9 / 1.0mm knurled
1.2 / 1.6mm knurled
Dimensions (mm)
87kg 810L x 410W x 620H
Weight (kg): 87
335amp @ 30%
250amp @ 60%
190amp @ 100%
Tested over 4 hour cycle
Part No.
KWM335SWF
Description
Mig Welder 335A with Separate Wire Feeder
Voltage
415V
WELDMAX Mig Welder 395S
The WELDMAX 395S is designed for
professionals who expect superior
performance from their welding
equipment. The 395 range provides
consistent welding with clean and crisp
characteristics on a wide range of
materials, including mild steel, stainless
steel & aluminium.
Duty Cycles
355amp @ 70%
300amp @ 100%
Tested over 4 hour cycle
Part No.
KWM395SWF
FEATURES
• Geared drive & pressure rollers
• 30-410amps welding range
• 30 Voltage settings
• Euro Torch connection
• 10m Interconnecting leads
• 25% bigger transformer than most
other conventional mig welders
• Copper wound transformers
• Overtemp protection
• Reverse polarity for gas or gasless
wire
• Trigger latch, switch & spot control
• Fan cooled
• 5 Year Transformer & choke
warranty
• 2 Year PCB & rectifier warranty
• 1 Year warranty on most other
components
SPECIFICATIONS
Hard Wire Sizes
0.6 / 0.8mm V
0.9 / 1.0mm V
1.0 / 1.2mm V
1.2 / 1.6mm V
Soft Wire Sizes
0.9 / 1.0mm U
1.2 / 1.6mm U
Cored Wire Sizes
0.9 / 1.0mm knurled
1.2 / 1.6mm knurled
Dimensions (mm): 1000L x 560W x
900H
Weight (kg): 168
Description
Mig Welder 395A with Separate Wire Feeder
Voltage
415V
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
WELDMAX Mig Welders
60
FEATURES
• Geared drive & pressure rollers
• 30-380amps welding range
• 30 Voltage settings
• Euro Torch connection
• 10m Interconnecting leads
• 25% bigger transformer than most
other conventional mig welders
• Copper wound transformers
• Overtemp protection
• Reverse polarity for gas or gasless
wire
• Trigger latch, switch & spot control
• Fan cooled
• 5 Year Transformer & choke
warranty
• 2 Year PCB & rectifier warranty
• 1 Year warranty on most other
components
SPECIFICATIONS
Hard Wire Sizes
0.6 / 0.8mm V
0.9 / 1.0mm V
1.2 / 1.6mm V
Soft Wire Sizes
0.9 / 1.0mm U
1.2 / 1.6mm U
Cored Wire Sizes
0.9 / 1.0mm knurled
1.2 / 1.6mm knurled
Dimensions (mm): 1000L x 560W x
900H
Weight (kg): 164
WELDMAX Mig Welder 335S
Machines WELDMAX Pulse Mig Welders/DC Stick Welders
Duty Cycles
280/250A @ 40% (40 C)
230/210A @ 60% (40 C)
200/180A @ 100% (40 C)
Part No.
PTS280PS
FEATURES
• Special characteristics for flux cored
wires and MIG brazing
• Operation directly on power source
• Gas purge, wire creep-in,
downslope, burnback, wire inch and
2-cycle/4-cycle selection operated
on power source
• Digital droplet size correction
• Hotstart and Arc-Force function for
MMA
• Input voltage autorange 340 - 480V
• Highly energy efficient
• Digitally controlled 4-roll wire feed
• Polarity reversal option
• Water cooled model available
SPECIFICATIONS
Current range 5 - 280A
Power Supply – 3/PE AC 400V
Wire feed rolls – 4
Wire diam steel/inox/alum – 0.81.6mm
Electrode diameter – 2.5-5.0mm
Dimensions (mm)
Aircooled 800L x 530W x 550H
Watercooled 1090L x 530W x 990H
Weight (kg): Aircooled – 40,
Watercooled – 110
Description
Inverter Pulse Mig Welder 280A - Compact
Voltage
415V
WELDMAX PTS500 Pulse
Mig Welder 500A
Part No.
PTS500PS
Part No.
PTS400PS
Duty Cycles
380A @ 40% (40 C)
350A @ 60% (40 C)
280A @ 100% (40 C)
Description
Inverter Pulse Mig Welder 400A - SWF
Voltage
415V
Did you know about...
FEATURES
• Special programs for MIG/MAG flux
cored wires and MIG brazing
• RMT programs for mild and stainless
steel
• Operation directly on wire feeder
• Gas purge, wire creep-in,
downslope, burnback, wire inch and
2-cycle/4-cycle selection operated
on wire feeder
• Digital droplet size correction
• Hotstart and Arc-Force function for
MMA
• Input voltage range 400V +25/-20%
• Highly energy efficient
• Digitally controlled 4-roll wire feed
• Polarity reversal option
• Water cooled model available
SPECIFICATIONS
The latest digital inverter welder with
perfect control of MIG/MAG pulsed
ARC, MIG/MAG short arc, for RMT
(Rapid MIG/MAG Technology), for TIG
DC Liftarc, for MMA and for MIG
brazing.
Excellent welding characteristics for all
types of weldable material by extremelt
fast dynamics.
The latest digital inverter welder with
perfect control of MIG/MAG pulsed
ARC, MIG/MAG short arc, for RMT
(Rapid MIG/MAG Technology), for TIG
DC Liftarc, for MMA and for MIG
brazing. Excellent welding
characteristics for all types of weldable
material by extremelt fast dynamics.
FEATURES
• Programs for MIG/MAG flux cored
wires and MIG brazing
• Gas purge, wire soft-start,
downslope, burnback and 2-cycle/
4-cycle switching adjustable on the
wire feeder
• Wire feeder mounted controls
• Digital droplet size correction
• Hotstart and Arc-Force function for
MMA
• Input voltage autorange 400V +25/
-20%
• Extremely reduced current
consumption
• Digitally controlled 4-roll wire feed
• Water cooled model available
SPECIFICATIONS
Current range – 5-390A
Power supply – 3/PE AC 400V
Wire feed rolls – 4
Wire diam steel/stainless/alum – 0.81.6mm
Electrode Diameter – 2.5-5.0mm
Dimensions (mm) 1090L x 530W x
1340H
Weight (kg): 125kg
Machines
The latest digital inverter welder with
perfect control of MIG/MAG pulsed
ARC, MIG/MAG standard, for MMA
and for MIG brazing. Excellent welding
characteristics for all types of weldable
material by extremelt fast dynamics.
Integrated 4-roll wire feed.
WELDMAX PTS400 Pulse
Mig Welder 400A
Section 3
WELDMAX PTS280 Pulse
Mig Welder 280A
Current range – 5 - 490A
Power supply – 3/PE AC 400V
Wire feed rolls – 4
Wire speed – 0-30m/min
Wire diam steel/inox/alum – 0.81.6mm
Electrode diameter – 2.5-5.0mm
Dimensions (mm) 1090L x 530W x
1440H
Weight (kg): 160
HC Mag-Heat
Controlled Mig/Mag?
The ultimate balance
control for Mig/Mag welding
• Allows you to shift the energy freely between
the wire electrode and work piece
• Simple, easily controllable root passes
• Less distortion
• Extreme gap bridging
• Cladding with adjustable degree of dilution
• Aids welding of heat sensitive materials
• Less damage to material and coating
• Optional on all Weldmax PTS Welders
Duty Cycles
490A @ 60% (40 C)
440A @ 100% (40 C)
Description
Inverter Pulse Mig Welder 500A - SWF
Voltage
415V
Contact us today to discuss
the benefits
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
61
WELDMAX Pulse Mig Welders/DC Stick Welders
Section 3
WELDMAX 125VP MMA DC Inverter
125A - 10Amp
FEATURES
• Factory optimised Hotstart, Arc-
Site
y
read
The 125VP is an advanced inverter
power source which is robust and
reliable for industrial applications
where a 10A power supply is available.
Duty Cycles
MMA/125A @ 35% (40 C)
MMA/110A @ 60% (40 C)
MMA/100A @ 100% (40 C)
Part No.
WEM125VP
Force and anti sticking using
electrodes up to 3.2mm
• Fitted with VRD device
• Lift start function
• 10Amp 240V power supply
• Light weight: only 4.4kg
• Handle and shoulder strap
• Excellent rutile, basic MMA welding
• Lift TIG DC ignition reduces
Tungsten inclusions
• Fast pulse TIG DC: focussed arc,
thinner material and lower
deformations
• Ideal for outdoor operation
SPECIFICATIONS
Current range
MMA / TIG – 5-125A / 5-125A
Power supply – 1x230Vac +
– 15% @ 50Hz
Tolerance line input – -20/+25%
OCV - VRD – 11V
Max - KVA – 5.0KVA
Dimensions (mm) 310L x 120W x
215H
Weight (kg): 4.4
Description
DC Tig/Stick Welder 125A with 10A input
Voltage
240V
WELDMAX 161T HF Tig Welder
160A DC Inverter
The 161T is an Advanced Digital
Inverter Welder, with perfect weld
stability and control of DC Tig, Pulse
Arc, High Frequency and MMA
standard. The 161T has excellent
welding characteristics for all welders
at all levels.
It’s light weight and reliable rugged
construction marks it as unique in its
field. With user friendly digital
interference it allows for precise
paramater settings.
Duty Cycles
MMA/220A @ 25% (40 C)
MMA/180A @ 60% (40 C)
MMA/160A @ 100% (40 C)
TIG/150A @ 25% (40 C)
TIG/115A @ 60% (40 C)
TIG/100A @ 100% (40 C)
62
WELDMAX 150VP MMA 150A DC
Inverter - 15Amp
Part No.
WEM161T
FEATURES
• TIG DC - High quality special HF
control provides 100% rapid and
precise arc ignition
• Pre-gas, post gas
• Up slope, down slope
• Slow pulse setting - welding with tig
rod
• Fast pulse setting - focussed arc,
thinner welding material and lower
deformations
• 2T/4T trigger control
• MMA - Hot start, arc force and anti
sticking facilitate operating, up to
3.2mm electrode
• Lightweight and portable
SPECIFICATIONS
Current range
TIG / MMA – 5-160A / 5-150A
Power supply – 1x230Vac +– 15% @
50-60Hz
OCV Voltage - VRD – 11V
Max - KVA – 6.4KVA
Dimensions (mm) 630L x 120W x
215H
Weight (kg): 5.4
Description
HF DC Tig Welder 160A with 15A input
Site
y
read
The 150VP is an advanced inverter
power source which is robust and
reliable for industrial applications.
Duty Cycles
MMA/220A @ 40% (40 C)
MMA/180A @ 60% (40 C)
MMA/160A @ 100% (40 C)
Part No.
WEM150VP
Current range
TIG / MMA – 5-220A / 10-180A
Power Supply – 1x230Vac +
– 15% @
50-60Hz
OCV Voltage - VRD – 11V
Max - KVA – 5.9KVA
Dimensions (mm) 460L x 230W x
325H
Weight (kg): 18.5
Description
DC Tig/Stick Welder 150A with 15A input
Voltage
240V
WELDMAX 204T HF Tig Welder
200A DC Inverter
Site
y
read
The Multipower 204T is the latest
digital inverter welder with very high
precision weld characteristics and has
all functions and features that a
professional welder needs and wishes for.
Being equipped with Multipower, the
PFC (Power Factor Corrector) is
dimensioned for supporting a voltage
range from 90 volts up to 270 volts.
The internal device makes it possible to
run off a generator with over 100mtrs
of long supply cable.
Duty Cycles
MMA/180A @ 35% (40 C)
MMA/130A @ 60% (40 C)
MMA/120A @ 100% (40 C)
TIG/200A @ 30% (40 C)
TIG/140A @ 60% (40 C)
TIG/130A @ 100% (40 C)
Voltage
240V
FEATURES
• Light weight: only 4.4kg
• Handle and shoulder strap
• Inverter power source for low
energy demand and best arc
performance
• Fitted with VRD device
• Excellent rutile, basic MMA welding
• Lift TIG DC ignition reduces
Tungsten inclusions
• Fast Pulse TIG DC: focussed arc,
thinner material and lower
deformations
SPECIFICATIONS
Part No.
WEM204T
FEATURES
• Q START - Rapid joining of weld
pools for initial starting
• Dynamic arc, ensures deeper
penetration and lower heat input
with more regular bead formation
• Fitted with VRD device
• Multipower - Allows setting of
different coated electrode types
• V.EI - Switch off arc Voltage MMA
• Voltage reduction device supports
range from 90-270V
• Slow fast pulse
• MULTITACK - reduces heat while
joining light gauge materials
• Pre-gas and post gas
• MMA up to 5mm electrodes
SPECIFICATIONS
Current range
TIG / MMA – 5-220A / 10-180A
Power Supply – 1x230Vac +– 15% @
50-60Hz,
OCV Voltage - VRD – 83-11V
Max - KVA – 5.8KVA
Dimensions (mm) 400L x 160W x
260H
Weight (kg): 11.49
Description
HF DC Tig Welder 200A with 15A input
Voltage
240V
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
WELDMAX tig Welders
Machines
Machines WELDMAX Tig Welders
Machines WELDMAX Tig Welders
The 220T is an advanced digital
inverter welder with perfect weld
stability and control of DC Tig, Pulsed
Arc, High frequency and MMA
standard. Provides excellent welding
characteristics for welders at all levels.
Duty Cycles
MMA/180A @ 60% (40 C)
MMA/150A @ 100% (40 C)
TIG/220A @ 40% (40 C)
TIG/180A @ 60% (40 C)
TIG/160A @ 100% (40 C)
Part No.
WEM220T
Description
Weldmax 220T MMA/Tig Welder 220A DC Inverter
Voltage
240V
WELDMAX 300T HF Tig Welder 300A
DC Inverter
Site
y
read
The latest digital inverter welder with
perfect weld stability and control of DC
Tig, Pulsed Arc, High Frequency and
MMA Standard. Providing excellent
welding characteristics for welders at
all levels.
The best option available for small,
medium and large sized welding
applications.
Duty Cycles
MMA/300A @ 40% (40 C)
MMA/230A @ 60% (40 C)
MMA/200A @ 100% (40 C)
TIG/300A @ 50% (40 C)
TIG/250A @ 60% (40 C)
TIG/210A @ 100% (40 C)
Part No.
WEM300T
WEMCU05SC
FEATURES
• Q START - Rapid joining of weld
pools for initial starting
• SYNERGIC IGNITION – modifies
ignition according to electrode
diameter
• Dynamic arc, ensures deeper
penetration and lower heat input
with more regular bead formation
• Remote torch controls, up/down
potentiometer foot control
• VRD Function
• TIG DC - High quality HF ignition
suitable for very long torches
• MULTITACK - reduces heat while
joining light gauge materials
• MMA - Up to 5mm electrodes
• Pre-gas and post gas
• Up slope and down slope
• Watercooled and fingertip current
control option
SPECIFICATIONS
Current range
TIG 20A – 5-300A
MMA 20A – 10-300A
Power Supply – 3x400Vac +– 15% @
50-60Hz
OCV Voltage - VRD – 11V
Max - KVA – 13.3KVA
Dimensions (mm): 460 x 230 x 325
Watercooler weight – 12kg
Capacity – 2.2l
Dimensions – 530L x 230W x 535H
Weight (kg): 19
Description
DC Tig Welder 300A Inverter with HF Start
Optional Water Cooler
Site
y
read
The 221 AC/DC is an advanced
technology single phase AC/DC tig
welder packed with every feature and
parameter the professional requires.
Super quiet and high stability arc.
Duty Cycles
MMA/180A @ 40% (40 C)
MMA/150A @ 60% (40 C)
MMA/120A @ 100% (40 C)
TIG/220A @ 35% (40 C)
TIG/180A @ 60% (40 C)
TIG/160A @ 100% (40 C)
Part No.
WEM221ACDC
WEMCU05C
FEATURES
• Q START - Rapid joining of weld
pools for initial starting
• VRD function
• Dynamic arc, ensures deeper
penetration and lower heat input
with more regular bead formation
• Mixed AC/DC – increases arc
penetration for thick aluminium
plate
• remote torch controls, up/down
potentiometer foot control
• MULTITACK - reduces heat while
joining light gauge materials
• Multiple AC Wave Forms – square,
sine and triangular
SPECIFICATIONS
Current range
TIG / MMA 16A – 5-220A
TIG / MMA 25A – 10-180A
Power Supply – 1x230Vac +– 15% @
50-60Hz
OCV Voltage - VRD – 11V
Max - KVA – 6.2KVA
Dimensions (mm): 530L x 230W x
210H
Weight (kg): 19.5
Description
HF AC/DC Tig Welder 220A with 15A input
Optional Water Cooler
Machines
Site
y
read
FEATURES
• Q-Start – Rapid joining of weld
pools for initial starting
• SYNERGIC IGNITION – modifies the
ignition according to electrode diam
• Dynamic arc ensures deeper
penetration and lower heat input
with more regular bead formation
• Remote torch controls, up/down,
potentiometer foot control
• VRD Function
• TIG DC – High quality HF ignition
suitable for very long torches
• MULTITACK – reduces heat input
while joining light gauge materials
• Q SPOT – For fast tacking, leave the
weld tack white and clean with very
little heat
• MMA – Up to 5mm electrodes
SPECIFICATIONS
Current range
TIG/MMA – 5–220 / 10–180
Power Supply 230Vac ± 15% @ 5060Hz
OCV Voltage – VRD - 81V
Max KVA – 5.9KVA
Dimensions (mm): 460L x 230w x 325H
Weight (kg): 18.5
WELDMAX 221T AC/DC HF
Tig Welder 200A Inverter
Section 3
Weldmax 220T HF/Tig Welder 220A
DC Inverter
Voltage
240V
240V
WELDMAX 300T AC/DC HF Tig
Welder Inverter
Site
y
read
The Weldmax 300AC/DC is designed
for welders at all levels. Thanks to its
dimensions and the ratio weigh-power/
duty cycle 300T is the best option on
the market, for small and medium
workshops.
Recommended also for demonstrations
and welding.
Duty Cycles
MMA/300A @ 30% (40 C)
MMA/220A @ 60% (40 C)
MMA/180A @ 100% (40 C)
TIG/300A @ 30% (40 C)
TIG/220A @ 60% (40 C)
TIG/180A @ 100% (40 C)
Part No.
WEM300ACDC
WEMCU1P
FEATURES
• Easy to transport at only 23kg
• Ideal option for maintenance and
repair on field, shipyard and
off-shore operation
• Cooling unit external connection
allows easy removal
• The Quick start function facilitates
the joining of the parts in the initial
stage of the welding process
• The Q-Spot function makes it
possible to minimise tacking times
for light gauge sheet metal
• High fillet welding degree of
finishing
• VRD function
SPECIFICATIONS
Current range
TIG/MMA – 5–300A / 10–300A
Power Supply 3x400Vac ± 15% @
50-60Hz
OCV Voltage – VRD - 71V
Max KVA – 14.6kVA
Dimensions (mm): 460L x 230w x 325H
Weight (kg): 23.0
Description
AC/DC Tig Welder 300A Inverter with HF Start
Optional Water Cooler
Voltage
415V
230V
Voltage
415V
240V
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
63
CEBORA Tig Welders
Section 3
CEBORA 1636/M Tri-Star MultiProcess Welder 160A Inverter
Inverter multiprocess single-phase
power source for MIG/MAG, DC TIG
(with “Cebora lift ignition”) and MMA
welding, with 2-roller wire feeder and
stored synergic curves for MIG/MAG
welding, electronic control of choke
value, spot welding time and pause
time. Supplied with 3m CEBORA MIG
welding torch Art. 1635 and work
return lead (3m - 16mm²). Supplied
without flowmeter, MMA welding
cables and TIG welding torch.
Part No.
298
1659
CEBORA 2230/M Star Synergic
Mig Welder 220A Inverter
FEATURES
FEATURES
• 5-160A welding range
• Stepless amperage control
• Inverter power source
• Upslope control
• Down-slope control
• Robust design
• Up/down amperage control option
• Thermal overload protection
• 35/50 Outlet sockets
• Generator compatible (7kVA min)
SPECIFICATIONS
• 15-220A welding range
• Stepless amperage control
• Synergic power source
• User friendly controls
• Upslope control
• Down-slope control
• Robust design
• Thermal overload protection
• 35/50 Outlet sockets
• Generator compatible (8kVA min)
SPECIFICATIONS
Single phase input – 240V 50/60Hz 20/+15%
Current range
MIG/MAG – 15A –: 160A
DC TIG – 5A –: 160A
MMA – 10A –: 130A
Wire spool size – 200mm / 5kg
Wire sizes – Fe 0.6/0.8/1.0, Al 1.0,
Inox 0.8, Cu-Si 3% 0.8, Cored 0.9
Electrode diameter – 1.5-3.25mm
Dimensions (mm): 207L x 437W x 411H
Weight (kg): 13
Single phase input – 240V 50/60Hz 20/+15%
Current range – 15A –: 160A
Wire spool size – 300mm / 15kg
Wire sizes – Fe 0.6/0.8/0.9/1.0/1.2,
Al 0.8/0.9/1.0/1.2, Inox
0.6/0.8/0.9/1.0/ 1.2, Cu-Si 3%
0.8/0.9/1.0, Cu-Al8 (AlBz8) 0.8/1.0,
Cored 0.9
Dimensions (mm): 320L x 585W x 500H
Weight (kg): 27
Duty Cycles
GTAW 160A @ 35%, 120A @
60%, 100A @ 100%
MMAW 130A @ 45%, 115A @
60%, 100A @ 100%
GMAW 60A @ 35%, 120A @
60%, 100A @ 100%
Description
Multiprocess Inverter 160A Power Source
Optional Storage Compartment Trolley
Voltage
240V
CEBORA 2060/MD Synergic Pulse
Mig Welder 200A Inverter
Synergic inverter MIG/MAG welding
single-phase power source, with
2-roller wire feed unit in aluminium,
with manual/synergic control panel
with stored curves. Comes with work
return lead (3,5m - 25 mm²) and
clamp. Supplied without welding
torch.
Part No.
299
1656
Description
Synergic Mig Welder 220A Inverter style
Optional Trolley
FEATURES
Double pulse programs
Inverter technology
15-205 Amp welding range
Fan cooled with thermal overload
protection
• Pre and post gas control
• Stepless voltage adjustment
• Welds up to 10mm steel, 7mm
aluminium & 7mm stainless steel
• Pulse, synergic & standard MIG
modes
• Upgradeable software
• Crater fill Upslope
SPECIFICATIONS
Synergic inverter MIG/MAG DOUBLE
PULSE single-phase welding power
source, with 2-roller wire feed unit in
aluminium, with manual/synergic
control panel with stored curves,
electronic control of choke value, spot
welding time and pause time. Comes
with work return lead (3m - 25 mm²)
and clamp. Supplied without welding
torch.
64
Part No.
301
1656
Synergic inverter MIG/MAG PULSE
welding power source. Comes with
control panel, 4-roller wire feed unit in
aluminium, trolley for transportation
of the power source and earth cable
(3,5 m - 35 mm²). Supplied without
cooling unit and welding torch.
Duty Cycles
200A @ 35%
160A @ 60%
145A @ 100%
Description
Synergic Pulse Mig Welder 200A Inverter
Trolley for use with 15kg spool holder
Duty Cycles
275A @ 40%
255A @ 60%
240A @ 100%
Voltage
240V
Voltage
240V
CEBORA 2740/T Synergic Pulse Mig
Welder 275A Inverter
•
•
•
•
Single phase input – 240V 50/60Hz
-20/+15%
Current range – 15A –: 200A
Wire spool size – 200mm / 5kg, 300mm /
15kg
Wire sizes – Fe 0.6/0.8/1.0, Al 0.6/0.8/1.0/
1.2, Inox 0.6/0.8/1.0, Cu-Si 3% 0.8/1.0,
Cu-Al8 (AlBz8) 0.8/1.0
Dimensions (mm): 260L x 580W x 471H
Weight (kg): 21.5
Duty Cycles
220A @ 30%
175A @ 60%
145A 100%
Part No.
307
FEATURES
• Versatile power source suitable for
various applications
• Factory fitted with a wide range of
synergic programs covering various
wire types in the different diameters
• New synergic programs may be
saved afterwards by means of a
simple upgrade procedure through
the RS232 port
• High performance, versatile & user
friendly
• PFC system allows a low electrical
input as well as a wide tolerance on
the supply voltage (+15% /-20%)
• Simple, self explanatory control
panel
• Select main welding parameters
directly from the control panel
SPECIFICATIONS
Three phase input – 415V 50/60Hz 20/+15%
Current range – 15A –: 160A
Wire spool size – 300mm / 15kg
Wire sizes – Fe 0.8/0.9/1.0/1.2,
Al 0.8/0.9/1.0/1.2, Inox
0.8/0.9/1.0/1.2, Cu-Si 3% 0.8/0.9/1.0,
Cu-Al8 (AlBz8) 0.8/0.9/1.0
Dimensions (mm) 510L x 970W x 960H
Weight (kg): 67
Description
Synergic Pulse Mig Welder 275A Inverter
Voltage
415V
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
CEBORA Mig Welders
Machines
Machines CEBORA Mig Welders
Machines CEBORA Mig Welders/Tig Welders
Part No.
643
1680
FEATURES
FEATURES
• Superior welding performance
• 350A Transformer power source
• 4 Roll wire feeder
• Synergic control
• Digital Volt/Amp display meter
• Optional water cooler unit
SPECIFICATIONS
• Superior welding performance
• 450A Transformer power source
• 4 Roll wire feeder
• Synergic control
• Digital Volt/Amp display meter
• Optional water cooler unit
SPECIFICATIONS
Three phase input – 415V 50/60Hz +–10%
Current range – 35A –: 400A
Wire spool size – 300mm / 5kg
Wire sizes – Fe 0.6/0.8/0.9/1.0/1.2,
Al 0.6/0.8/0.9/1.0/1.2, Inox
0.6/0.8/0.9/ 1.0/1.2, Cu-Si 3% 0.9
Dimensions (mm): 615L x 975W x 900H
Weight (kg): 90
Three phase input – 415V 50/60Hz +–10%
Current range – 40A –: 500A
Wire spool size – 300mm / 5kg
Wire sizes – Fe 0.8/0.9/1.0/1.2/1.6,
Al 1.0/1.2/1.6, Inox 0.8/0.9/ 1.0/1.2,
Cored 1.2
Dimensions (mm): 615L x 975W x 900H
Weight (kg): 125
Duty Cycles
350A @ 40%
290A @ 60%
220A @ 100%
Description
Mig-Mag 350A Synergic Welding Machine
Optional Water Cooler unit
Duty Cycles
Synergic three phase power source for
MIG-MAG welding. Comes with work
return lead (3,5 m - 95mm2) and
clamp. Supplied without torch, wire
feed unit and extension lead.
Voltage
415V
CEBORA 2641/T Synergic AC/DC
Tig Welder 260A Inverter
Part No.
647
1680
Part No.
366
1683
450A @ 40%
370A @ 60%
290A @ 100%
Description
Mig-Mag 450A Synergic Welding Machine
Optional Water Cooler unit
Voltage
415V
CEBORA 3341/T Synergic AC/DC
Tig Welder 330A Inverter
FEATURES
FEATURES
• 260A Inverter power source
• High frequency start
• Synergic control
• Records up to 9 welding programs
• Pulsed arc control for thin materials
SPECIFICATIONS
• 330A Inverter power source
• High frequency start
• Synergic control
• Records up to 9 welding programs
• Pulsed arc control for thin materials
• Water cooler unit fitted
SPECIFICATIONS
Three phase input – 415V 50/60Hz +–10%
Current range – 10A –: 210A
Dimensions (mm): 705L x 1060W x
975H
Weight (kg): 65
Synergic inverter MMA and pulse A.C.D.C. TIG welding power source with
built-in HF ignition. Can be connected
to the optional cooling unit. Comes
with trolley for transportation of the
power source. Supplied without
cooling unit, torch and welding cables.
Duty Cycles
MMA/210A @ 40%
MMA/200A @ 60%
MMA/190A @ 100%
TIG/260A @ 50%
TIG/240A @ 60%
TIG/230A @ 100%
Description
Synergic AC/DC Tig Welder 260A Inverter
Optional Water Cooler unit
Machines
Synergic three phase power source for
MIG-MAG welding. Comes with work
return lead (3,5 m - 35mm2) and
clamp. Supplied without torch, wire
feed unit and extension lead.
CEBORA Evo 450 TS Synergic 450A
Mig Welder
Section 3
CEBORA Evo 350 TS Synergic 350A
Mig Welder
Three phase input – 415V 50/60Hz +–10%
Current Range – 10A –: 330A
Dimensions (mm)
705L x 1060W x 975H
Weight – 93kg
Synergic inverter MMA and pulse A.C.D.C. TIG welding power source with
built-in HF ignition. Supplied with
cooling unit and trolley for
transportation of the power source.
Supplied without torch and welding
cables.
Voltage
415V
Part No.
367
Duty Cycles
MMA/330A @ 40%
MMA/320A @ 60%
MMA/310A @ 100%
TIG/330A @ 50%
TIG/320A @ 60%
TIG/310A @ 100%
Description
Synergic AC/DC Tig Welder 330A Inverter
Voltage
415V
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
65
CEBORA Mig Welders/Tig Welders
Machines ENSITECH Tig Welding Cleaners
Section 3
Machines
ENSITECH TBX-160 Tig Brush Kit
The entry level performer in
stainless steel weld cleaning. The
TIG Brush has solved the access and
burn-through problems of hard
electrodes, by replacing them with a
brush. The unique brush design
provides fast, high-quality results even
in the most inaccessible areas.
Part No.
K0160-XC1
FEATURES
FEATURES
• Cleans material thickness to 5mm
• One step cleaning & passivation
• No more pickling paste
• Water based clean up
• Works on all thicknesses
• Low running costs
• Portable & tough
• 100% duty cycle
SPECIFICATIONS
• Cleans material thickness to 10mm
• One step cleaning & passivation
• No more pickling paste
• Water based clean up
• Low running costs
• Portable & tough
• Enhanced power
• Simple, variable control
• 100% duty cycle
SPECIFICATIONS
Patented Dynamic Power Transfer
240V single phase power
Weld cleaning & passivation
Surface restoration (polishing) option
100% duty cycle
12 month warranty
Variable power
2x Optimised for larger brushes
Standard power output
6m maximum reach with extension
cables
Description
TBX-160 Stainless Steel Weld Cleaning Kit
Voltage
240V
ENSITECH TBX-700 Tig Brush Kit
For the ultimate in heavy duty,
high performance, stainless steel
weld cleaning. Synergic three phase
power source for MIG-MAG welding.
Comes with work return lead (3,5 m 35mm2) and clamp. Without torch,
wire feed unit and extension lead.
Part No.
K0700-X01
ENSITECH TBX-300 Tig Brush Kit
For everyday high performance
stainless steel weld cleaning. The
TIG Brush has solved the access and
burn-through problems of hard
electrodes, by replacing them with a
brush. The unique brush design
provides fast, high-quality results even
in the most inaccessible areas.
Part No.
K0300-X01
Patented Dynamic Power Transfer
240V single phase power
Weld cleaning & passivation
Surface restoration (polishing) option
100% duty cycle
24 month warranty
Variable power
4x Optimised for larger brushes
Enhanced power output
12m maximum reach with extension
cables
Description
TBX-300 Stainless Steel Weld Cleaning Kit
Voltage
240V
ENSITECH Tig Brush Marking Kit
FEATURES
FEATURES
• Cleans material thickness to 20mm
• One step cleaning & passivation
• No more pickling paste
• Unparalleled safety features
• 240V single phase power
• Handles the toughest work easily
• 100% duty cycle
• Water resistant
SPECIFICATIONS
• Used to etch stainless steel products
with identifying marks such as
logos, part numbers and barcodes
• Re-useable stencil
• Custom stencils available
• Uses your existing machine power
source
• Replace brush with marking head
SPECIFICATIONS
Patented Dynamic Power Transfer
240V single phase power
Weld cleaning & passivation
Surface restoration (polishing) option
100% duty cycle
24 month warranty
Quad brush size
Heavy duty power output
18m maximum reach with extension
cables
Rated IP65 for water resistance
The Marking Kit includes:
1 litre TB-90 Marking Fluid for
Stainless Steel,
1 x sample stencil,
1 x TIG Brush marking adapter,
1 x TIG Brush marking head,
10 x marking head O-rings,
1 x roll marking felt strip (1m),
1 x roll masking tape,
2 x micro fibre cloths
Description
TBX-700 Stainless Steel Weld Cleaning Kit
Voltage
240V
Part No.
KMAR-A01
Description
Tig Brush Marking Kit
Voltage
66
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
ENSITECH Tigbrush Technology
Machines ENSITECH
2
3
4
5
6
7
8
Part No
A1006
A1006-10
A1063
A0027
A0027
A0095
A1043
A1049
A0113
A1077
A1062
A1044
A1086
A0102
A0145
A0103
A0150
S0058
S0089
Description
Brush - Single
TIG Brush Tip - 10 Pack
Wand Assy 50mm (non standard)
Insulating Shroud (single brush, all models)
Long Insulating Shroud - Long (single brush, all models)
Dual Brush Shroud (TBX MODELS)
Dual Brush Adaptor (TBX MODELS)
Quad Brush Adaptor (TBX-700 only)
Quad Brush Shroud (TBX-700 only)
Flexi Wand (attaches to existing handle)
Flexi Handle with red lead
Extension Cable Set (TBX MODELS) 3.0m
Extension Cable Set (TBX MODELS) 6.0m
Extension Cable - Red (TBX MODELS) 3.0m
Extension Cable -Red (TBX MODELS) 6.0m
Extension Cable -Black (TBX MODELS) 3.0m
Extension Cable -Black (TBX MODELS) 6.0m
Socket Insulator moulding - 2 reqd
Connector Socket - for TBX models
1
5
2
3
4
Part No
S0100
S0143
S1003
S1018
S1040
S1083
S8007
S8008
S8014
S8017
S8021
S8031
S8071
S8097
S9018
A0059
S0049
S1013
Description
Handle Cable Combo (TBX)
Handle Cable Combo (TBX) 6 metres
Wand Assy 100mm (standard)
Wand Pack (Wand assy, shroud, brush)
Clamp Cable (TBX)
Clamp Cable (TBX) 6 metres
Knob
IEC Socket
Control Transformer
Power Cord AU
Thermo Switch
Fuse 4 Amp Slow Blow M205 (TB & TBX)
Circuit Breaker 35Amp
Rectifier Semikron
Earth Clamp
Red Extension Cable (for TB- 250)
Handle Cable Combo (TB- 250)
Clamp Cable (TB- 250)
Machines
1
Section 3
ids
For flu ge
see pa
190
6
7
8
Lightning fast weld cleaning Tig brush
AFTER
BEFORE
•
•
•
•
Safe low toxicity water soluble fluids
No licence required to use
One step cleaning and passivation
Unparalleled safety features
•
•
•
•
IP65 Rated housing (700 Series)
240V Single phase power
Flexible brush applicators
Portable design
Contact Alphaweld for an onsite demonstration of Tigbrush!
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
67
ENSITECH Tigbrush Technology
Machines HYPERTHERM® Plasma Cutters
Professional-grade plasma system for
handheld cutting 10 mm metal.
System includes power supply, 4.5m
Duramax LT hand torch with standard
consumables, 4.5m work clamp,
operator and safety manuals.
Consumable kit with 1 standard
nozzle, 1 electrode, 1 FineCut nozzle
and 1 FineCut deflector. Supplied with
plastic carry case and carrying strap.
Duty Cycle
30A @ 35%
Part No.
088082
027668
FEATURES
• High-power cutting on thick metal
plus FineCut® consumables for
detailed, thin metal cutting
• Plug into any 240 V power with
Auto-VoltageTM technology and
included plug adaptors
• 50% increase in cutting power* for
fast cut speeds
• Less edge preparation - patented
consumables designs provide
superior cut quality
• Twice the consumable life* and
70% more efficient on average for
lower cost of cutting
• New DuramaxTM LT torch designed
to withstand impact and heat
• Hypertherm CertifiedTM reliability
ensures performance in the most
demanding environments
SPECIFICATIONS
Input voltages – 120-240V 1-PH
50/60Hz
Output current – 15-30A
Cutting Specs:
10mm- 500 mm/min
12mm - 250 mm/min
Severance:
16mm- 125 mm/min
Gas supply – Clean, dry, oil-free air or
nitrogen
Dimensions (mm): 356L x 168W x 305H
Weight (kg): 9.7
Description
30A Inverter Plasma Cutter
Circle Cutting Guide Deluxe Kit
Voltage
240V
HYPERTHERM® Powermax 45®
Plasma Cutter
Professional-grade plasma metal
cutting and gouging system for
handheld cutting 12mm.
Duty Cycles
50% @ 45A, 230V, 1PH
60% @ 41A, 230V, 1PH
100% @ 32A, 230V, 1PH
50% @ 45A, 380/400V, 3PH
60% @ 41A, 380/400V, 3PH
100% @ 32A, 380/400V, 3PH
Part No.
088018
088020
027668
HYPERTHERM® Powermax 65®
Plasma Cutter
Professional-grade plasma metal
cutting and gouging system for
handheld cutting 19mm and
mechanized piercing 16mm.
Duty Cycles
CE
68
50% @ 65A, 380/400V, 3PH
100% @ 46A, 380/400V, 3PH
Part No.
083279
027668
FEATURES
• Finish jobs faster with cut speeds
one and a half times greater than
oxyfuel on 13mm mild steel
• Spend less time on grinding and
edge preparation due to superior
cut and gouge quality
• No need to change the air pressure.
Smart SenseTM technology ensures
that it is always correctly set
• Drag cut at full output with a
patented shield that reduces dross
buildup for smoother cutting
• Tackle different jobs with multiple,
easy-to-use torch styles
• Reduce costs with long consumable
life and more uptime
• High power efficiency lowers energy
consumption
SPECIFICATIONS
Input voltages – 200-480V 1-PH
50/60Hz
200-600V 3-PH 50/60Hz
Output current – 20-65A
Cutting Specs: 20mm- 500 mm/min
25mm - 250 mm/min
Severance: 32mm- 125 mm/min
Gouging: 4.8kg/hr
Gas supply – Clean, dry, oil-free air or
nitrogen
Dimensions (mm): 500L x 233W x
450H
Weight (kg): 29
Description
65A Invertor Plasma Cutter
Circle Cutting Guide Deluxe Kit
Voltage
415V
FEATURES
• Small size and light weight provides
exceptional portability for a 3mm
rated cutting system
• Handheld and mechanized useage
with CNC interface and Fast
ConnectTM torch connection
• Patented drag-cutting technology
makes it easy to use - even for first
time operators
• Less edge preparation - patented
consumables designs provide
superior cut and gouge quality
• Cut speeds 188% faster than
oxyfuel on 6.5mm mild steel
• PowercoolTM design cools internal
components more effectively for
long system life and improved
uptime
SPECIFICATIONS
Input voltages – 200-240V 1-PH
50/60Hz
480V 3-PH 50-60Hz
Input current @ 5.95kW – 200/230V
1-PH 34/28A, 480V 3-PH 9A
Cutting Specs: 12mm- 500 mm/min
19mm - 250 mm/min
Severance: 25mm- 125 mm/min
Gouging: 2.8kg/hr
Output current – 20-45A
Gas supply – Clean, dry, oil-free air or
nitrogen
Dimensions (mm) 420L x 170W x 350H
Weight (kg): 16.8
Description
45A Inverter Plasma Cutter
45A Inverter Plasma Cutter
Circle Cutting Guide Deluxe Kit
Voltage
240V
415V
HYPERTHERM® Powermax 85®
Plasma Cutter
Professional-grade plasma metal
cutting and gouging system for
handheld cutting 25mm and
mechanized piercing 19mm.
Duty Cycles
CE
60% @ 85A, 380/400V, 3PH
100% @ 66A, 380/400V, 3PH
Part No.
087117
027668
FEATURES
• Finish jobs faster with cut speeds
two and a half times greater than
oxyfuel on 13mm mild steel
• Spend less time on grinding and
edge preparation due to superior
cut and gouge quality
• No need to change the air pressure.
Smart SenseTM technology ensures
that it is always correctly set
• Drag cut at full output with a
patented shield that reduces dross
buildup for smoother cutting
• Tackle different jobs with multiple,
easy-to-use torch styles
• Reduce costs with long consumable
life and more uptime
• High power efficiency lowers energy
consumption
SPECIFICATIONS
Input voltages – 200-480V 1-PH
50/60Hz
200-600V 3-PH 50/60Hz
Output current – 25-85A
Cutting Specs: 25mm- 500 mm/min
32mm - 250 mm/min
Severance: 38mm- 125 mm/min
Gouging: 8.8kg/hr
Gas supply – Clean, dry, oil-free air or
nitrogen
Dimensions (mm): 500L x 233W x
450H
Weight (kg): 32
Description
85A Invertor Plasma Cutter
Circle Cutting Guide Deluxe Kit
Voltage
415V
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
HYPERTHERM® Plasma Cutters
Section 3
Machines
HYPERTHERM® Powermax 30XP®
Plasma Cutter
Machines HYPERTHERM® Plasma Cutters
Duty Cycle
105A @ 80%
Part No.
059416
229467
027668
Description
105A Invertor Plasma Cutter
Optional Wheel Cart
Circle Cutting Guide Deluxe Kit
Voltage
415V
Professional-grade plasma metal
cutting and gouging system for
handheld cutting 38mm and
mechanized piercing 25mm.
Duty Cycle
125A @ 100%
Part No.
059526
229467
027668
FEATURES
• Finish jobs faster with cut speeds
five times greater than oxyfuel on
1/2” mild steel
• Spend less time on grinding and
edge preparation due to superior
cut and gouge quality
• Maximise your cutting time with
100% duty cycle
• Reduce costs with consumable life
up to four times longer than the
other systems in this amperage
range
• Electrode end-of-life detection
protects the torch and workpiece
from damage by automatically
stopping power when the electrode
is overused
• No need to change the air pressure.
Smart SenseTM technology ensures
that it is always correctly set
• Tackle different jobs with multiple,
easy-to-use torch styles
SPECIFICATIONS
Input voltages – 415V 3-PH 50-60Hz
Input current @ 21.9kW – 400V 3-PH
36A
Output current – 30-125A
Cutting Specs: 38mm- 500 mm/min
44mm - 250 mm/min
Severance: 57mm- 125 mm/min
Gouging: 12.5kg/hr
Gas supply – Clean, dry, oil-free air or
nitrogen
Dimensions (mm): 592L x 274W x
508H
Weight (kg): 48.9
Description
125A Invertor Plasma Cutter
Optional Wheel Cart
Circle Cutting Guide Deluxe Kit
Machines
Professional-grade plasma metal
cutting and gouging system for
handheld cutting 32mm and
mechanized piercing 22mm.
FEATURES
• Finish jobs faster with cut speeds
three times greater than oxyfuel on
13mm mild steel
• Spend less time on grinding and
edge preparation due to superior
cut and gouge quality
• Reduce costs with long consumable
life and more uptime
• Electrode end-of-life detection
protects the torch and workpiece
from damage by automatically
stopping power when the electrode
is overused
• No need to change the air pressure.
Smart SenseTM technology ensures
that it is always correctly set
• Drag cut at full output with a
patented shield that reduces dross
buildup for smoother cutting
• Tackle different jobs with multiple,
easy-to-use torch styles
SPECIFICATIONS
Input voltages – 200-600V 3-PH
50/60Hz
Output current – 30-105A
Cutting Specs: 32mm- 500 mm/min
38mm - 250 mm/min
Severance: 50mm- 125 mm/min
Gouging: 9.8kg/hr
Gas supply – Clean, dry, oil-free air or
nitrogen
Dimensions (mm): 590L x 275W x
508H
Weight (kg): 45
HYPERTHERM® Powermax 125®
Plasma Cutter
Section 3
HYPERTHERM® Powermax 105®
Plasma Cutter
Voltage
415V
We deliver for fast results
• 3 Daily Perth metro runs.*
• Fast turn around - 3 hour despatch on
stocked lines.
• Free delivery with every order over $200+gst.
• Daily despatch to WA regional areas.
• Daily airfreight despatch available. **
• Daily despatch to Darwin, Brisbane, Sydney,
Melbourne and Adelaide.
* Excluding Rockingham and Mandurah.
**Additional charges may apply – confirm with your sales
consultant.
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
69
HYPERTHERM® Plasma Cutters
Machines Lincoln Electric Welders
Machines
Power Mig® 180C RTW 240V Welder
PowercraftTM 180i RTW 240V Welder
FEATURES
FEATURES
• Designed for 0.6-0.8mm solid wire
• Generator compatible
• Intelligent protection for over-
and 0.9-1.2mm
Section 3
• Large, easy-to-set knobs provide
With the widest output in its class, the
Power MIG® 180C is ideal for the
home handyman right through to the
small fabrication and body repair shop.
The continuous voltage control makes
tuning in the perfect setting a breeze
while Lincoln Electric’s Diamond Core
Technology™ makes for easy starts
and a smooth, stable arc that reduces
spatter and clean-up time.
Output range (Amps DC) - 30-180
Rated input (Amps) - 10.7
Recommended generator - 6 KVA
Input/phase/voltage/hertz 240/1/50/60
Dimensions (mm) 357H x 258W x 472D
Weight (kg): 30
Duty Cycle
130A @ 30%
Part No.
K2668-1
voltage, low voltage & over-current.
voltage control and full range
continuous wire feed speed control
• Connects to 240V 15A outlet
• Built-in “burnback” function insures
proper wire stickout after each weld
with no sticking in the weld puddle
• Stepless control voltage for precise
adjustments
• Complete and ready to weld with
3-meter gun, work lead and clamp,
spool of SG2 0.9Kg, spool of
Innershield® NR® 211MP 0.45kg,
drive roll 1.2, 0.8/0.9 & 0.6mm,
contact tips 0.9 & 0.6mm & Adapter
5kg spool
SPECIFICATIONS
Description
Power Mig® 180C RTW 240V Welder
Voltage
240V
PowerplusTM 350HD 415V Welder
• Lift TIG for arc starting without
tungsten contamination
• Auto arc force for a stable arc with
low spatter levels as standard
• Easy to use - ideal for less
experienced welders
• Meets IEC 60974-1 international
standards for welding machines
• Thermally protected for longer life
• IGBT technology for high reliability
• Ready to weld with accessories &
power cord included
SPECIFICATIONS
The Powercraft 180i inverter 3 in 1
Stick, TIG, MIG machine is intended to
be used for light to medium duty
welding applications. It’s an ideal
choice for contractors, maintenance or
repair, rural and serious DYI. This
machine is designed to be used with
Mild steel gas shielded MIG, gasless
FCAW, mild steel, low hydrogen,
stainless steel electrodes, and DC TIG.
Part No.
K69020-1
Rated
Output
140A @ 20%
180A @ 20%
180A @ 20%
Voltage
240V
FEATURES
FEATURES
• Wide 50-400 amp welding output
• Infinitely variable voltage selection
• Outstanding aluminium & stainless
• Potted and encapsulated printed
circuit board controls in separate
dust free compartments
• Low cylinder entry for easy loading
and unloading of the gas cylinder.
• All controls are conveniently located
on the wire feeder next to the
operator
• LF-33 small rugged and easy to
handle feeder with bright digital
Volt and Amp meters
• Electronic feedback system on the
wire drive will guarantee consistent
wire feed speed
SPECIFICATIONS
metal in a single pass
• Low cylinder entry for easy loading/
unloading
• All controls are conveniently located
on the wire feeder next to the
operator
• Superb arc characteristics with
argon mix and 100% CO2
• Electronic feedback system on the
wire drive will guarantee consistent
wire feed speed
• Equipped with large diameter
wheels push/pull bar and lifting eyes
for full manoeuvrability
SPECIFICATIONS
Output range: 50-400A
Duty cycle:
Wire sizes:
Solid 0.8-1.6mm
Alum 1.2-1.6mm
FCAW 1.2-1.6mm
Wire feed speed: 1-20m/min
Dimensions (mm): 970L 480W x 1000H
Weight (kg): 140
The Idealarc® CV-425 is an industrial
power source for heavy-duty
applications. Designed to operate in
heavy environmental conditions these
can be shipyards or offshore yards.
Therefore the machines are truly
meeting IP23 allowing operation in any
adverse condition. Also all the sensitive
components are enclosed in a dust free
compartment.
Duty Cycles
Duty Cycles
420A @ 60%
325A @ 100%
350A @ 60%
270A @ 100%
Description
PowerplusTM 2 350HD Welder
Output range - 10-420A
Rated input - 22 kVA @ 60%
Output range (Amps) - 10-420A
Power source dimensions (mm): 1020L
x 696W x 880H
Feeder dimensions (mm): 645L x 188W
x 436H
Power source weight (kg): 152
Feeder weight (kg): 17
Dimensions (mm) 880H x 696W x
1020D
Weight (kg): 152
Voltage
415V
Part No.
K14028-1A
K14030-1W
Description
Idealarc® CV-425 SWF Welder
Lincoln LF33 Wire Feeder
Voltage
415V
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
Lincoln Electric
70
Stick
TIG
MIG
Current
Range
20-140A
20-180A
20-180A
Idealarc® CV-425 SWF Welder
performance, not just mild steel
Part No.
K60093-1P
Duty Cycles
Mode
Description
PowercraftTM 180i RTW 240V Welder
• MIG Weld 0.5mm to 8.0mm sheet
A heavy-duty, three-phase machine
with a generous output range of 50400 Amps providing excellent duty
cycle capabilities for increased
productivity. Included in the package is
the LF33 wire feeder, making this a
workhorse with plenty of grunt and
maximum flexibility. Delivering
exceptional welding characteristics, the
POWERPLUS™ 350 HD’s Diamond
Core Technology™ provides easy arc
starting and a stable arc across the
entire welding range for optimum
performance. It drastically reduces
spatter and minimises costly clean-up
time.
Dimensions (mm): 550L x 320W x 440H
Weight (kg): 15.5
Machines Lincoln Electric Welders
Idealarc® CV-510 SWF Welder
FEATURES
FEATURES
• Potted and encapsulated printed
• Ready-To-Weld™ packages include
circuit board controls in separate
dust free compartments
welding leads, shield, hammer/
brush and carry case
• Low cylinder entry for easy loading
• Built in VRD
• IP23- rated
• Long cables- primary power
and unloading of the gas cylinder
• All controls are conveniently located
on the wire feeder next to the
operator
• LF-33 small rugged and easy to
handle feeder with bright digital volt
and amp meters
• Electronic feedback system on the
wire drive will guarantee consistent
wire feed speed
SPECIFICATIONS
Part No.
K14081-1A
K14030-1W
Duty Cycles
500A @ 60%
385A @ 100%
Description
Idealarc® CV-510 SWF Welder
LF33 Wire Feeder
Voltage
415V
Invertec® 170S Stick Package
240V (15A) Welder
extension cables up to 60 metres
• Soft and Crisp mode Selectable arc
modes for different electrode types
• Auto Adaptive Arc Force- for a
stable arc with low spatter levels
• “Hot Start” for excellent arc striking
• Lift TIG- with excellent striking
without tungsten contamination
• Suitable for use with generators
SPECIFICATIONS
The Invertec® 150S is built with the
job in mind and is suited to a variety of
applications and working environments.
Its design has focused on providing
excellent welding and arc starting in a
reliable package. Built in a robust metal
case with large rubber corners and
push control buttons for added
protection it is rugged and robust on
one hand and portable on the other.
The Invertec® 150S is lightweight and
easy to handle in any situation.
Part No.
K12034-2-P
welding leads, shield, hammer/
brush and carry case
• Built in VRD
• IP23- rated
• Long cables- primary power
extension cables up to 60 metres
• Soft and crisp mode selectable arc
modes for different electrode types
• Auto adaptive arc force- for a stable
arc with low spatter levels
• “Hot Start” for excellent arc striking
• Lift TIG- with excellent striking
without tungsten contamination
SPECIFICATIONS
The Invertec 170S is built with the job
in mind and is suited to a variety of
applications and working environments.
Its design has focused on providing
excellent welding and arc starting in a
reliable package. Built in a robust metal
case with large rubber corners and
push control buttons for added
protection it is rugged and robust on
one hand and portable on the other.
The Invertec 170S is lightweight and
easy to handle in any situation.
Part No.
K12035-2-P
Output range - 10-160A
Rated input - 16A
Input/phase/voltage/hertz
230V/1/50-60Hz
Output range (Amps) - 10-160A
Dimensions (mm)
244H x 148W x 365D
Weight (kg): 7.0
Duty Cycle
[email protected]%
Description
Invertec® 170S Stick Package 240V (15A) Welder
Voltage
240V
PowercraftTM 130 Stick Package
RTW 240V (10A) Welder
FEATURES
K12035-2-p
Duty Cycle
140A @ 30%
Description
Invertec® 150S Stick Package 240V (15A) Welder
• Ready-to-Weld™ packages include
• Suitable for use with generators
Output range - 10-140A
Rated input - 16A
Input/phase/voltage/hertz
230V/1/50-60Hz
Output range (Amps) - 10-140A
Dimensions (mm) 224H x 148W x 365D
Weight (kg): 6.7
Machines
The Idealarc CV-510 is an industrial
power source for heavy-duty
applications. Designed to operate in
heavy environmental conditions these
can be shipyards or offshore yards.
Therefore the machines are truly
meeting IP23 allowing operation in any
adverse condition. All sensitive
components are enclosed in a dust free
compartment.
Output range - 40-500A
Rated input - 30 kVA @ 60%
Dimensions (mm) - Machine
870H x 565W x 1030D
Net weight (kg) - Machine: 160
Section 3
Invertec® 150S Stick Package
240V (15A) Welder
The PowercraftTM 130 inverter machine
is intended to be used for light to
medium duty welding application as an
ideal choice for maintenance, small
repairs & general fabrication and
designed to be used with 6011, 6013
& 7018 type electrodes up to 3.2 mm
in diameter. The Powercraft 130
inverter machine is very compact,
lightweight and comes with a shoulder
strap for ease of transportation with
accessories included, so the machines
are ready to use out of the box.
FEATURES
• Built-in VRD
• Generator compatible
• Intelligent protection
• Lift TIG
• Auto Arc Force
• Built in “Hot Start”
• Anti- sticking
• Meets IEC 60974-1
• Thermally protected
• GBT technology
• Easy to set output control
• Ready to weld with accessories
• 10amp rated input
SPECIFICATIONS
Output range - 20-130A
Rated input - 10A
Recommended generator - 8kVA
Input/phase/voltage/hertz 240/1/50/60
Output range (Amps) - 20-130A
Dimensions (mm)
190H x 110W x 330D
Weight (kg): 4.7
Duty Cycle
[email protected]%
Voltage
240V
Part No.
K69016-1
Description
PowercraftTM 130 Stick Package RTW 240V (10A) Welder
Voltage
240V
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
71
Lincoln Electric
Section 3
Powercraft 160 Stick Package RTW
240V (15A) Welder
Powercraft 180 Stick Package RTW
240V (15A) Welder
FEATURES
Built-in VRD
Generator compatible
Intelligent protection
Lift TIG
Auto arc force
Built in “hot start”
Anti- sticking
Meets IEC 60974-1
Thermally protected
IGBT technology
Easy to set output control
Ready to weld with accessories
SPECIFICATIONS
FEATURES
Built-in VRD
Generator compatible
Intelligent protection
Lift TIG
Auto arc force
Built in “hot start”
Anti- sticking
Meets IEC 60974-1
Thermally protected
IGBT technology
Easy to set output control
Ready to weld with accessories
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
The Powercraft 160 inverter machine is
intended to be used for light to
medium duty welding application as an
ideal choice for maintenance, small
repairs & general fabrication and
designed to be used with 6011, 6013
& 7018 type electrodes up to 3.2 mm
in diameter. The Powercraft 160
inverter machine is very compact,
lightweight and comes with a shoulder
strap for ease of transportation with
accessories included, so the machines
are ready to use out of the box.
Output range - 20-160A
Rated input - 15A
Recommended generator - 8kVA
Input/phase/voltage/hertz 240/1/50/60
Output range (Amps) - 20-160A
Dimensions (mm) 230H x 140W x 360D
Weight (kg): 6.8
The Powercraft 180 inverter machine is
intended to be used for light to
medium duty welding application as an
ideal choice for maintenance, small
repairs & general fabrication. It is
designed to be used with 6011, 6013
& 7018 type electrodes up to 4.0mm in
diameter. The Powercraft 180 inverter
machine is very compact, lightweight
and comes with a shoulder strap for
ease of transportation with accessories
included, so the machines are ready to
use out of the box.
Description
Powercraft 160 Stick Package RTW 240V (15A) Welder
Voltage
240V
Part No.
K69019-1
LNTM-8 Wire Feeder
The LN-8 is a semiautomatic constant
speed wire feeder providing
dependable performance and reliable
operation, making it ideal for shop or
field operations.Easy to use with a
quick release gun and cable connection
for easy set up with large wire feed
and voltage control knobs.
72
Part No.
K297
Output range - 20-180A
Rated input - 15A
Recommended generator - 8kVA
Input/phase/voltage/hertz 240/1/50/60
Output range (Amps) - 20-180A
Dimensions (mm) 230H x 140W x 360D
Weight (kg): 6.8
Duty Cycle
180A @ 22%
Duty Cycle
[email protected]%
Part No.
K69018-1
•
•
•
•
•
•
•
•
•
•
•
•
Description
LNTM-8 Wire Feeder
Description
Powercraft 180 Stick Package RTW 240V (15A) Welder
Voltage
240V
Linc Feed 33 Wire Feeder
FEATURES
FEATURES
• Unique drive roll design provides
• Small, rugged and easy to handle
positive feed and quick reloading by
simple insertion of wire into the
guide tube
• Drive rolls and guide tubes are
designed for long life and precise
wire feeding
• Dynamic braking system stops wire
feed motor quickly to minimize
crater sticking problems
• Control circuit features “cold
electrode” when the gun trigger is
released for added safety
• Solid state control compensates for
wire drag and input line variations
to maintain accurate wire feed
speed
• Control of wire feed speed and
voltage at the wire feeder eliminates
the need to return to the power
source to adjust procedures
• Easy to adjust with gloved hands
SPECIFICATIONS
with bright digital volt and ammeter
for improved control
• Electronic feedback system
guarantees consistent wire feed
speed
• Excellent drive system with four
large drive rolls and powerful motor.
• Features quick connect water
cooling connections
• Full enclosed wire spool cover
• Mobile built in undercarriage
• Optional 10m or 15m
interconnection cables either air or
water cooled
• Remote control option for greater
operator convenience
SPECIFICATIONS
Wire feed speed range - 1.3-15.2m/min
Drive rolls - 2
Voltage/phase hertz - 115
Wire size (mm)
Solid: 0.8-2.4
Cored: 1.2-3.0
Connector type - Bayonet
Dimensions (mm)
227H x 248W x 244D
Weight (kg): 16.2
Voltage
115VAC
The LF33 is a wire feeder designed to
withstand extreme environmental
conditions. The result is an incredibly
rugged, protective casing as standard
completed with an undercarriage For
use under tough industrial conditions
this feeder is able to accept D300
(15KG) and small D200 (5KG) wire
spools, using solid or cored wire. The
LF33 is equipped with 2/4-step, run-in,
wire inch and gas purge. Two clear
digital meters display the welding
voltage and amperage.
Part No.
K14030-1W
Description
Linc Feed 33 Wire Feeder
Input/Phase/Voltage/Hertz - 34-44 VAC
Wire Feed Speed Range - 1-20m/min
Drive Rolls - 4
Voltage/Phase Hertz - 34-44VAC
Wire size (mm)
Solid 0.8 - 1.6mm
Cored 1.0 - 1.6mm
Dimensions (mm)
440H x 270W x 636D
Weight (kg): 17
Voltage
34-44VAC
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
Lincoln Electric
Machines
Machines Lincoln Electric Welders
Machines Lincoln Electric Welders
Vantage® 400 Diesel Welder
The LN™-25 PRO is ideal for field
construction, steel fabrication, shipyard
industries. The maxtrac wire drive
enhances performance and the
LN™-25 PRO is designed to be simple,
reliable and easy to service with the
replacement case-and many other
upgrade options can be installed very
quickly.
Part No.
K2613-5A2
Description
LNTM-25 Pro Wire Feeder with Magnum 400 gun
Voltage
10/110VAC
Air Vantage® 500 Diesel Welder
FEATURES
FEATURES
• Arc control adjusts to produce a soft
• Belt driven VMAC® rotary screw
compressor rated at 60 CFM, 100PSI
arc or more forceful arc to suit you
• 100% duty cycle delivers abundant
• Arc performance 350 amps @100%
The Vantage® 400 is one of the most
compact 400 amp engine driven
welder generators available on the
market. It has a four-cylinder Perkins
diesel engine that can perform across a
wide range of processes including stick
(conventional and pipe modes), MIG
including FCAW, TIG welding and
gouging. This model efficiently
generates 13kVA or auxiliary power for
your lights or power tools in 240V &
415V.
FEATURES
• Two step trigger interlock provides
comfort for long welds
• Sturdier and rugged spindle
designed with an incorporated
brake
• Analogue voltmeter with polarity
indicator LED automatically adjusts
to welding polarity
• Non-linear wire feed speed gives
single range control, yet maintains
sensitivity with low wire feed speed
• Lightweight, impact & flame
resistant polycarbonate case design
• PC board protected
• Case can be replaced in less than
5 minutes - eliminates downtime
• Timer kit available to prevent the
electrode from sticking in the crater
when using high wire feed speeds
SPECIFICATIONS
Wire feed speed range - 1.217.7m/min
Drive rolls - 2
Wire size (mm)
Solid: 0.6-1.6
Cored: 1.7 -2.4
Connector type - Bayonet
Dimensions (mm)
356H x 191W x 533D
Weight (kg): 15.4
duty cycle with an output range of
up to 400 amps using Chopper
Technology®. All ratings are at 40°C
• “Hot” start for easier starts and
restrikes which minimises the
electrode “sticking” to the work
• Excellent CV wire welding with
cored-wire and MIG (CO2 and
blended gas). Up to 2.4mm E70T-6
up to 260 IPM, 27V
• Standard fuel, oil, temp. gauges and
meters
• 96dDA noise level performance
• Factory-fitted, built-in voltage
reduction device (VRD)
• 13.2kVA of auxiliary power with
240V, 15A IP66 rated outlets
SPECIFICATIONS
Output range - 30-400A
Engine Type - Perkins 404C-22 liquidcooled 4 cylinder diesel
HP @ RPM - [email protected]
Dimensions (mm)
913H x 642W x 1524D
Net weight – 560kg
The Air Vantage® 500 is a multiprocess 575 amp DC arc welder with
the added advantage of the new belt
driven VMAC® rotary screw compressor
pumping out plenty of air for gouging.
This welding equipment delivers high
performance across a wide range of
processes including conventional stick
and pipe stick modes, TIG, MIG
welding including FCAW with excellent
gouging capabilities.
Duty Cycles
Duty Cycles
400A @ 60%
350A @ 100%
575A @ 50%
500A @ 100%
Part No.
Description
K32038-1
Vantage® 400 Diesel Welder
K32038-1V-0001 Vantage® 400 Diesel Welder Mine Spec
Voltage
N/A
N/A
Machines
FEATURES
• Two step trigger interlock provides
comfort for long welds
• Sturdier and rugged spindle
designed with an incorporated
brake
• Analogue voltmeter with polarity
indicator LED automatically adjusts
to welding polarity
• Non-linear wire feed speed gives
single range control, yet maintains
sensitivity with low wire feed speed
• Lightweight, impact & flame
resistant polycarbonate case design
• PC board protected against
moisture and corrosion
• Case can be replaced in less than
5 minutes - eliminates downtime
LN™-25 PRO is ideal for field
• Timer kit available to prevent the
construction, steel fabrication, shipyard
electrode from sticking in the crater
industries. The maxtrac wire drive
when using high wire feed speeds
enhances performance and the LN™SPECIFICATIONS
25 PRO is designed to be simple,
Wire feed speed range - 1.2reliable and easy to service with the
17.7m/min
replacement case-and many other
Drive rolls - 2
upgrade options can be installed very
Wire size (mm)
quickly. Includes 1 x K126 gun, 1 x
Solid: 0.6-1.6
Drive roll kit 1.7-1.8mm cored & 1 x
Cored: 0.8-2.0
Drive roll kit 1.6mm cored
Connector type - Bayonet
Dimensions (mm)
356H x 191W x 533D
Weight (kg): 16
Part No.
Description
Voltage
K2613-5A1
LNTM-25 Pro Wire Feeder with K126 Gun
10/110VAC
LNTM-25 Pro Wire Feeder with
Magnum 400 gun
Section 3
LNTM-25 Pro Wire Feeder with
K126 Gun
air for arc gouging with up to 9.5mm
carbons, plasma cutting and air tools
like impact wrench or needle guns
• Simple to operate with five process
modes, including CC-Stick, CC-Pipe,
CC-Gouging, Touch-Start TIG or CV
Wire
• Optimised CC-stick mode for
general purpose and E7018 low
hydrogen electrodes
• Arc control adjusts to produce a soft
arc or more forceful arc to suit you
• Full instrumentation of fuel, oil
pressure, temperature gauges and
hour meter with digital volt/amp
meters
• Cummins® B3.3 diesel engine 56 HP
4 cylinder liquid-cooled, includes
automatic engine idler for greater
fuel economy and reduced noise
• Factory-fitted, built-in voltage
reduction device (VRD)
• 12kVA of auxiliary power with two
240V, 15A IP66 rated outlets
SPECIFICATIONS
Output range - 30 - 575A
Engine type - Cummins B3.3 liquidcooled 4 cylinder HP @ RPM - 56hp @
1800 rpm
Dimensions (mm)
1260H x 831W x 1603D
Net weight – 785kg
Part No.
Description
K32012-1
Air Vantage® 500 Diesel Welder
K32012-1V-0001 Air Vantage® 500 Diesel Welder Mine Spec
Voltage
N/A
N/A
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
73
Lincoln Electric
Machines Lincoln Electric Welders
FEATURES
FEATURES
• Simple to operate with five process
• Flexible multi-process capability –
modes
• CC-Stick mode optimised for general
Vantage® 580 is a rugged, reliable and
capable welder for demanding and
harsh environments. The Vantage® 580
has all the power you need and the
safety features that modern standards
demand. Standard features include a
battery isolator switch for safer
maintenance procedures and engine
stop button to quickly shut the unit
down in the event of an emergency.
It delivers a low maintenance, easy
operation with a great arc performance
every time.
Duty Cycles
525A @ 60%
500A @ 100%
Part No.
K2963-1
K2963-1V-0001
purpose and E7018 low hydrogen
electrodes
• Arc control adjusts to produce a soft
arc or more forceful arc to suit you
• Touch-Start™ DC TIG welding for
easy arc starting avoiding tungsten
contamination and high frequency
• Digital volt/amp meter with built-in
pre-set function makes it easy to
precisely set your procedures
• Arc gouging up to 13mm carbons
• New carbon arc gouging waveform
delivers improved performance
• Standard fuel, oil pressure,
temperature gauges and hour meter
with digital Volt/Amp meters
• Factory-fitted, built-in voltage
reduction device (VRD)
• 20kVA auxiliary power to power up
to 3 inverter power sources - up to
four stick electrode welding arcs for
higher productivity. 240V and 415V
IP66 rated outlets
SPECIFICATIONS
Output range (Amps) - 30-580
Engine Type - Perkins 404D-22T,
4 cylinder turbo, liquid cooled
HP @ RPM - 43 @ 1850
Dimensions (mm)
913H x 642W x 1524D
Weight (kg): 586
Description
Vantage® 580 Diesel Welder
Vantage® 580 Diesel Welder Mine Spec
Voltage
N/A
N/A
FlextecTM 650 Power Source
74
FlextecTM 450 Power Source
The Flextec 450 is a multi-process
welder that delivers up to 500 amps of
welding power for a variety of
applications, including construction
and fabrication. It features an IP23
rating for outdoor operation and
storage.
Duty Cycle
Output range - 10-500A
Input/phase/voltage/hertz
415/460/575/3/50/60
Dimensions (mm)
477H x 356W x 673D
Weight (kg): 56.8
450A @ 60%
Part No.
K3065-1
K163
including stick, touch start TIG®
(DC), MIG, flux-cored welding and
carbon arc gouging with up to a
3/8 in. (9.5 mm) carbon
• Faster arc response means smoother
arc action and more consistent bead
appearance
• Low power consumption results in
daily operational cost savings
• The user interface is designed with
the operator in mind
• Bright digital amp and volt meters easy to monitor, even in sunlight,
and resettable for precise procedure
control
• Built in VRD offers additional
protection for the operator
• Selectable hot start - off for thin
material, on for extra starting amps
for thick, rusty or dirty material
• Arc control adjusts to produce a soft
arc or more forceful arc to suit you
• Remote control capability (foot
pedal or hand control) to remotely
vary output up to 30m away
• Desert duty rated – outputs are rated
for extreme operation up to 55°C
SPECIFICATIONS
Description
FlextecTM 450 Power Source
Trolley/Undercarriage Suit Wire Feeder
Voltage
415V
Invertec® V350-Pro Inverter Welder
FEATURES
FEATURES
• Flexible multi-process capability –
• Exceptional multi-process fabrication
including stick, touch start TIG®
(DC), MIG, flux-cored welding and
carbon arc gouging
• Faster arc response for smoother arc
action and consistent bead
appearance
• Low power consumption results in
daily operational cost savings
• The user interface is designed with
the operator in mind
• Bright digital amp and volt meters easy to monitor, even in sunlight,
and resettable for precise control
• Built in VRD
The Flextec TM 650 is a powerful
• Selectable hot start - off for thin
material, on for extra starting amps
multi-process welder designed to
for thick, rusty or dirty material
handle all processes. Easy to use and to
• Arc control adjusts to produce a soft
transport around a construction or
arc or more forceful arc to suit you.
mine site. Featuring a tough IP23 rated
• Remote control capability to vary
enclosure that is designed for outdoor
output up to 30m away
operation and storage that will
• Welding outputs are rated for
withstand extreme field environments.
extreme operation up to 55°C
The inverter technology of the
SPECIFICATIONS
Flextec TM 650 yields a higher
efficiency and power factor compared
Output Range - 10A/10V - 850A/44V
Input/phase/voltage/hertz
to similar conventional power sources
380/415-460/575/3/50/60
resulting in lower running costs.
Output Range(Amps) - 10 - 815 Amps
Rated Output (duty cycle) Duty Cycles
650A/44V/100%
650A @ 100%
460/575/3/50/60
750A @ 60%
Dimensions (mm)
555H x 409W x 745D
Weight (kg): 74.8
Part No.
Description
Voltage
TM
K3278-1
Flextec 650 Power Source
415
K163
Trolley/Undercarriage Suit Wire Feeder
The Invertec® V350-PRO is the most
powerful portable inverter welding
power source in its class. It utilises the
optimum wave form for each welding
process - Stick welding, TIG welding,
MIG welding and flux-cored with the
ability to add an optional pulse MIG
capability. This powerful piece of
welding equipment will add significant
flexibility to your welding operation,
whether on-site or in the shop.
Duty Cycles
350A @ 60%
275A @ 100%
Part No.
K1728-12
welding with CC stick soft, CC stick
crisp, DC TIG, CV wire for MIG and
metal cored, CV Innershield®,
Outershield® flux cored, arc gouging
up to 7.9 mm carbon
• Input voltages and frequencies are
both single and three phase rated.
• 5-425 amp output range for all
recommended processes
• Input voltage from 208-440 and 50
and 60 Hz operation - runs on
virtually any input power supply
• Touch start TIG for contaminationfree starts
• Low power consumption for energy
savings 88% efficiency
• Factory fitted VRD
• Bright, large digital amp and volt
meters are easy to monitor even in
sunlight and resettable for precise
procedure control
• Rugged skid and tube handles- for
convenience and added protection
SPECIFICATIONS
Output range - 5-425A
Rated input - 28/26/24A
Recommended generator - 27 kVA
Input/phase/voltage/hertz
380/415/440/3/50/60
Dimensions (mm)
373H x 318W x 706D
Weight (kg): 37
Description
Invertec® V350-Pro Inverter Welder
Voltage
N/A
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
Lincoln Electric
Section 3
Machines
Vantage® 580 Diesel Welder
Machines MOSA Engine Drive Welders
Magic Weld 150
Magic Weld 200
D.C WELDING
Current Range, Continuous - 30-150 Amp
Open Circuit Voltage - 65V
Electrode Diameter - 2.0mm - 3.25mm
A.C. GENERATOR
Single-Phase (Max) - 2KVA / 230 V / 8.7 A
Single-Phase (Continuous)
1.6KVA / 230 V / 6.9 A
Insulating Class - H
Type - Honda GX200
Output - 5 kW (6.8HP) Maximum output
not exceedable - according to ISO 3046/1
RPM - 4000
Displacement - 196 cc
Cylinders - 1
Fuel Consumption - 313 g/kWh
Tank Capacity - 3.6 Litres
Running Time (at 60% Duty Cycle) 3.5 hours
Protection - IP23
Dimensions (mm)
420L x 360W x 480H
Weight – 34kg
Noise Level 74 dB (A)
D.C WELDING
Current Range, Continuous - 30-200 Amp
Open Circuit Voltage - 40 - 70V
A.C GENERATOR
Power Input - 230V 50Hz
Single-Phase Generation (Max) - 2.2kVA /
9.6 A
Single-Phase Generation (Continuous) 2.0kVA / 8.7 A
Insulating Class - H
Engine - Honda GX270 Petrol engine c/w
oil alert
Net Power - 6 kW (9.0 HP- In accordance
with SAE J1349
RPM - 3600
Displacement - 270 cc
Cylinders - 1
Fuel Consumption - 313 g/kWh
Tank Capacity - 5.3 Litres
Running Time (at 60% Duty Cycle) - 3.3hrs
Protection - IP23
Dimensions (mm)
610L x 490W x 520H
Weight – 57kg
Noise Level 74 dB (A)
Output
• High Frequency (40kHz) control of
welding current
• Chopped DC Auxiliary output (2 kW
max)
Oil pressure engine shut-down
Power on demand auto-Idle
Air Cooled
Permanent Magnet Alternator
Manual Recoil Start
SPECIFICATIONS
The Mosa Magic Weld is a High Quality
Portable Petrol Welder Generator with
a 150A welding output capable of
welding 4mm electrodes, features a
110VDC 1.5KW output for fixed speed
power tools, lighting. Magic Weld 150
is an indispensable machine when it
comes to mobile repair welding.
Duty Cycle
150A @ 60%
Part No.
M222620000
Description
Magic Weld 150
Voltage
N/A
TS200 DES/CF Welder
The Mosa Magic Weld is a High Quality
Portable Petrol Welder Generator with
a 200A welding output (DC) capable
of welding 4mm electrodes, features a
110V AC 2.1KW output for power
tools, lighting. Welder remote control
option enables adjustment up to 20
meters away from the machine.
Duty Cycle
200A @ 60%
Part No.
M22250000
Description
Magic Weld 200
FEATURES
FEATURES
• Dual Welding Range 20-100A /
• Multi process welder
• Continuous setting of current or
90-190A
voltage welding
Arc Force continuous setting
Remote control (option)
A.C. power available while welding
Power optimiser (engine power
optimisation system)
• EV Engine protection
• Super silenced
SPECIFICATIONS
•
•
•
•
Ground Fault Interrupter
Yanmar Diesel Engine
Manual Recoil Start (DS)
Electric Start (DES)
Wrap-around protective frame
Meets EEC regulations
SPECIFICATIONS
•
•
•
•
•
Duty Cycle
190A @ 35%
160A @ 60%
120A @ 100%
Part No.
M272720000
Description
TS200 DES/CF Welder
Voltage
N/A
CT230 SX Plus CC/CV Welder
• Welds Cellulose electrodes
• Auxiliary Power (6kVA)
• Protection: Thermal Overload /
The Mosa TS 200 DES/CF is an
industrial quality, high specification,
engine driven diesel welder generator
with efficient fuel consumption. The
unit is transportable and fitted with a
frame enabling easy handling. The TS
200 welder provides 200 amps welding
output and 110/240/4KVA electrical
auxiliary output. An ideal unit for any
site welding work.
Machines
•
•
•
•
•
FEATURES
DC Welding Output
Patented Digital Welding Control
Chopper Welding Technology
Welder Generator Output - 1.6 kW
110V AC
• Overload Protection
• Patented Auto Idle
• 4mm Welding Electrode Capacity
• EEC Noise Compliant
• Optional Trolley
SPECIFICATIONS
•
•
•
•
Section 3
FEATURES
• Continuously Variable DC Welding
D.C Welding current range (continuous) 20-100A / 90-190A
Open circuit voltage - 98V
Electrode diameter - 2.0-4.0mm
A.C generator - 50 Hz, asynchronous,
415V, self-excited, self-regulated
Three-phase generation (Max) 6kVA /400V/8.7A
Single-phase generation - 5kVA/230V/21.7A
Duty cycle - 100%
Insulating class - H
Engine - Yanmar L100AE diesel 4 stroke
air-cooled
Output - 6.5 kW (8.8 HP) max output
according to ISO 3046/1
RPM - 3000
Displacement - 406 cc
Cylinders - 1
Fuel consumption - 245 g/kWh
Tank capacity - 5.5 Litres
Running time (at 60% Duty Cycle) - 4.5 hrs
Protection IP23
Dimensions (mm)
900L x 550W x 622H
Weight – 130 kg
Noise level - 74 dB (A)
Voltage
N/A
Site
y
read
A reliable diesel powered generator
welder from the CT super silenced
series. Chopper Technology (CT)
provides an excellent smooth and
ripple-free DC welding current and
features a modern fuel efficient diesel
engine, alongside a MOSA brushless
asynchronous alternator.
Comes complete with VRD, Emergency
stop and battery isolator.
Duty Cycle
210A @ 60%
180A @ 100%
Part No.
M372990000
D.C Welding - SMAW, GTAW, GMAW, FCAW
Current range - 20-210A / Voltage range
15-30V
Open circuit voltage - 65V / Open circuit
voltage 15-30V
A.C generator - Asynchronous 415V,
self-excited/regulated brushless
Three phase power - 6kVA /400V/8.7A
Single phase power - 5kVA/230V/21.7A
Single phase power - 2.5kVA /110V/22.7 A
Insulating class - H
Engine - Yanmar L100N Diesel 4 stroke
air-cooled
Net power - 6.5 kW (8.8 HP) Maximum
output (not overloadable) according to
ISO 3046/1
RPM - 3000
Displacement - 435 cc
Cylinders - 1
Fuel consumption (welding 60%)
1l/hour
Tank capacity - 23 Litres
Running time (at 60% Duty Cycle) - 23 hrs
Protection - IP23
Dimensions (mm)
1020L x 645W x 930H
Weight – 247kg
Description
CT230 SX Plus CC/CV Welder
Voltage
N/A
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
75
Mosa
Machines MOSA Welders
Machines
CT 350K SX Engine Driven Welder
DSP400 YSX-PL Diesel Welder
Generator
• Auxiliary power (up to 12kVA)
• Bunded Base
• Large (45Ltr) fuel tank for up to 13
FEATURES
• Arc welding source in D.C. welding
• SMAW: Shielder Metal Arc Welding
(Stick)
• GTAW: Gas Tungsten Arc Welding (TIG)
• High frequency welding current and
voltage control
Site
y
read
The engine-driven welder CT 350 KSX
is a professional machine with
electronic control which allows for a
more stable arc when welding and
superior finished weld quality.
Equipped with a KOHLER KD 477.2
diesel engine and an asynchronous
alternator, it can be used
simultaneously as a welder and as a
three-phase and single-phase electrical
generator up to 10 kVA Also features
auto idle economizer which introduces
the concept of “power on demand”,
allowing both fuel savings and reduced
engine wear. The CT 350 KSX is able to
weld any kind of electrode (rutile,
basic, cellulose) up to 6mm.
Part No.
M373200000
three-phase
Aux power available while welding
KOHLER air-cooled engine
Engine protection EP7
MOSA Power optimiser
Large tank – 38 litre
Bunded base
Emergency stop button
SPECIFICATIONS
•
•
•
•
•
•
•
Current Range (Amps): 20 - 350
Electrode Diameter: 2 - 6 mm
Welding Voltage OCV:65
Engine: Kohler KD 477.2
A.C. GENERATION
Three-phase generation: 10 kVA /
400V / 14.4A
Single-phase generation: 5 kVA / 230V
/ 21.7A
Protection: IP 23
Noise rating: 94/95 dB(A) (69/70 @ 7m)
Dimensions (mm): 1230L x 690W x 925H
Weight (kg): 345
Site
y
read
The MOSA DSP 400 YSX-PL watercooled diesel engine driven welder is a
multi-process generator welder which
has Chopper Technology. It is capable
of SMAW (Stick), GMAW (MIG), FCAW
(Flux Cored), and GTAW (TIG Contact
start) Complete with a fuel gauge
and large long running tank and
remote welding option.
FEATURES
• Multi-Process Welder
• High Frequency digital control of
welding current
• Low Welding current range (50%)
in C.C. mode
• EP7 engine shutdown (Oil, Temp,
Duty Cycle
350A @ 60%
Description
CT 350K SX
Fuel, Battery)
Voltage
240V
DSP 500 PS-PL Diesel Welder
Generator
Part No.
M894150000
Description
DSP 400 YSX-PL
Fuel, Battery)
• Auxiliary power (up to 16kVA)
• Ground fault interrupter protection
• Large (60Ltr) fuel tank for up to 14
hours operation
SPECIFICATIONS
This MOSA 500 PS/EL-VRD is high
calibre welder formulated to be utilised
in tough and challenging industries
such as Mining, Quarrying, Ship
Repairs, Steel Fabrication and Pipeline
construction. The Welding Digital
Control (WDC) provides five welding
settings obtainable for Contact TIG
DC, & MMA stick.
FEATURES
• Multi-process welder
• High frequency digital control of
welding current
• Low welding current range (50%) in
C.C. mode
76
Part No.
M785130000
Description
DSP 500 PS-PL
D.C Welding - SMAW (Stick)/ GTAW (TIG)
- constant current (C.C.)
Constant current range (Stick / TIG) - 10 500A
D.C Welding - GMAW (MIG)/ FCAW (flux
cored) - constant voltage (C.V.)
Constant voltage range - 16 - 40V
Duty cycle - 450A @ 60%, 400A @ 100%
Three phase generation - 16kVA / 400V /
23.1A
Single phase generation - 12 kVA / 230V /
52.2A
Duty cycle - 100%
Engine - Perkins 404 C-22G diesel
4 stroke water-cooled
Protection - IP23
Dimensions (mm) 1720L x 980W x 1110H
Acoustic level - 68 dB (A)
Weight (kg): 750
Voltage
N/A
DSP 600 PS-PL Diesel Welder
Generator
• EP7 engine shutdown (Oil, Temp,
Site
y
read
Duty Cycles
400A @ 35%
350A @ 60%
300A @ 100%
Site
y
read
The engine-driven welder DSP 600 PS
is a professional machine with digital
adjustment of the welding parameters
DSP (Digital Signal Processor) and
welding circuit with Chopper technology
(high frequency 20 kHz). It can be used
simultaneously as a welder and as a
three-phase and single-phase electrical
generator. With the lower engine
speed (1500 rpm) it is suitable for
continuous operation in all conditions.
FEATURES
• High frequency Digital Control of
welding current
• Multi process welder
• Low welding current range (50%) in
C.C. mode
• Auxiliary power up to 30 kVA
• Ground Fault Interrupter protection
• Large 65 litre fuel tank
• Fitted with VRD
• Engine protection (oil pressure,
temperature & overspeed)
SPECIFICATIONS
Current Range (Amps): 10 - 600
Electrode Diameter: 2 - 6 mm
Welding Voltage OCV: 60
Engine: Perkins 1103A-33G1
A.C. GENERATION: Three-phase
generation: 30kVA / 400V / 43.3A
Single-phase generation: 15kVA / 230V /
65.2A
Protection: IP 23
Noise rating: 94/95 dB(A) (69/70 @ 7m)
Dimensions (mm): 2030L x 870W x 1130H
Weight (kg): 1000
Duty Cycles
Duty Cycles
500A @ 35%
450A @ 60%
400A @ 100%
SMAW (STICK)/ GTAW (TIG):
600A @ 35%, 550A @ 60% & 500A
@100%
GMAW (MIG)/ FCAW (flux cored):
550A @ 60% & 500A @100%
Voltage
N/A
Part No.
M786150000
6110
Description
DSP 600 PS-PL
Roll Frames to suit MOSA 600
Voltage
N/A
N/A
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
Mosa
Section 3
• A.C. generator, single-phase and
hours operation
SPECIFICATIONS
D.C Welding - SMAW (Stick)/ GTAW
(TIG) - constant current (C.C.)
Constant current range (Stick / TIG) 10 - 400A
D.C Welding - GMAW (MIG)/ FCAW
(Flux Cored) - constant voltage (C.V.)
Constant voltage range - 15 - 40V
Three phase generation - 12kVA /
400V / 17.3A
Single phase generation - 7 kVA / 230V
/ 30.4A
Engine - Yanmar 3 TNV 76 diesel 4
stroke water cooled
Protection - IP23
Acoustic level - 68 dB (A)
Dimensions (mm) 1570L x 720W x
1100H
Weight (kg): 535
Machines Unimig Welders
Razorweld 200A Inverter MIG Welder
FEATURES
• MIG function allows you to weld
The RAZORWELD MIG200 is a new
inverter-based portable MIG welding
machine with added (MMA) stick
function. The MIG function allows you
to weld with both gas shielded and
gas-less wire applications. Easy
step-less adjustment of voltage and
wire feed make for easy setting of
welding parameters giving excellent,
professional welding results.
Primary input voltage - 240V Single
phase
Welding current MIG 30A / 15.5V - 200A / 24.0V
MMA 10A/20.4V - 200A/28.0V
Welding voltage range - DC
Wire spool Size (kg) - 1 & 5 kg
Wire size (mm) - 0.6, 0.8, 0.9, 1.0 &
1.2
Dimensions (mm): 470L x 190W x
380H
Weight (kg): 12.5
with both Gas Shielded and Gasless
Flux Cored wires
• MMA capability delivers easy
The UNIMIG 250 is an inverter-based
portable MIG welding machine with
added MMA and TIG function. It is an
industrial machine that is lightweight
and portable. Optional trolley with
drawer and cylinder rack provides off
the floor operation and better
maneuverability around a workshop.
An ideal unit for general maintenance
or rural and home workshops.
Duty Cycle (40ºC)
MIG 35% @ 250A / 100% @ 148A
MMA 35% @ 224A / 100% @ 137A
Duty Cycle (40ºC)
20% @ 200 amps MIG
15% @ 200 amps MMA
Part No.
Description
KUMJRRW200MIG Razorweld 200A Inverter MIG Welder
Voltage
240V
Part No.
KUMJR250
electrode welding with quality
results, inc cast Iron, s/steel and low
hydrogen
• Optional TIG torch provides quality
DC TIG (Lift Arc) welding of mild
steel, stainless steel and copper
• Spool gun ready
• 4M Arc welding lead set with 35/50
dinse style connections
• UNI-FLAME twin gauge argon
regulator
• 2m Gas hose complete with fittings
• Optional 6m spool gun and trolley
SPECIFICATIONS
Machines
FEATURES
Latest IGBT inverter technology
Internal wire feeder gear driven
Adjustable burn back
Spool gun connection
Stepless voltage and wire feed
control
• Stick electrode (MMA) function
• Includes VRD
• Excellent arc stability and both hot
start & anti stick
• Solid industrial case construction
• Tolerant to variable power supply
SPECIFICATIONS
•
•
•
•
•
Section 3
Inverter Mig/MMA/Tig 250A
(Portable) Welder
Primary input voltage - 240V single
phase
Welding current - MIG 30-250 amps
Voltage steps - 10-250 amps
Welding voltage range - 15.5V-22.5V DC
Wire spool size (kg) - 1, 5 & 15 Kg
Wire size (mm) 0.6 - 1.2 Ferrous, 0.8 - 1.0 S/steel, 0.9 1.2 Alu, 0.9 - 1.2 Flux cored
Dimensions (mm): 580L x230W x 450H
Weight (kg): 24
Description
Inverter Mig/MMA/Tig 250A (Portable) Welder
Voltage
240V
Inverter Mig/MMA/Tig 250A,
(Wheels) Welder
Trolley to suit MIG 250A
(Portable)Welder
FEATURES
FEATURES
• Highly maneuverable trolley
• Gas cylinder bracket
• Tool drawer for added storage
• Latest IGBT inverter technology
• Internal gear drive wire feeder for
SPECIFICATIONS
• Adjustable burn back
• Spool gun connection
• Stepless voltage and wire feed
5kg and 15kg spools
N/A
control
• Stick electrode (MMA) function
• Includes VRD
• Excellent arc stability and both hot
start & anti stick
• Solid industrial case construction.
• Tolerant to variable power supply
Trolley to suit UNIMIG separate wire
feeder machines with gas cylinder
bracket and tool drawer for added
storage supplied as standard.
The Uni-Mig 250K is an inverter-based
portable Mig welding machine with
added MMA and TIG function. The
MIG function allows you to weld with
both Gas Shielded and Gasless wires.
An ideal unit for general maintenance
or rural and home workshops.
Duty Cycle (40ºC)
MIG 35% @ 250A / 100% @ 148A
MMA 35% @ 250A / 100% @ 148A
Part No.
KUMJRTROLLEY
Description
Trolley to suit 250 Welder
Voltage
N/A
Part No.
KUMJR250K
SPECIFICATIONS
Primary input voltage - 240V Single
phase
Welding current MIG 30 -250 amps
MMA 10-250 amps
Welding voltage range - 15.5V-26.5V
DC
Wire spool size (kg) - 5 & 15 kg
Wire size (mm) 0.6-0.9 Ferrous, 0.8-0.9 S/steel, 0.9-1.0
Alu, 0.9-1.2 Flux cored
Dimensions (mm): 890L x 460W x
670H
Weight (kg): – 58
Description
Inverter Mig/MMA/Tig 250A (Wheels) Welder
Voltage
240V
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
77
Unimig
Machines Unimig Welders
Section 3
Machines
Inverter Mig/MMA/Tig 350A Welder
This MIG Separate Wire Feeder is an
inverter-based MIG welding machine
with added MMA and TIG function.
This is an industrial machine equipped
with a separate 4 roll gear driven wire
feeder and 10m interconnecting
cables. Provides excellent arc stability
for MIG/TIG & MMA welding. Ideal for
heavy and structural applications
through to general engineers,
maintenance workshops, light
engineering.
FEATURES
FEATURES
• Latest IGBT inverter technology
• DC TIG welding with scratch start
• Voltage & wire feed controls at wire
feeder
• Variable inductance & burn back
controls
• Adjustable crater current control
• Gas check / inch wire
• 2T/4T trigger function
• LED digital display
• 35-50mm dinse style connections
• Certified to AS/NZ60974
SPECIFICATIONS
• Latest IGBT inverter technology
• DC TIG welding with scratch start
• Voltage & wire feed controls at wire
feeder
• Variable inductance & burn back
controls
• Adjustable crater current control
• Gas check / inch wire
• 2T/4T trigger function
• LED digital display
• 35-50mm dinse style connections
• Certified to AS/NZ60974
SPECIFICATIONS
Power Supply: 415V 3 Phase
Output Current Range:
MIG/ 50A/16.5V-350A/31.5V
MMA/ 20A/20.8V-350A/34.0V
Dimensions Power Source (mm): 595L x
280W x 440H
Dimensions Wire Feeder (mm): 630L x
235W x 420H
Weight Power Source (kg): 38
Weight Wire Feeder (kg): 14
Duty Cycle (40ºC)
MIG 60% @ 350Amps
MMA 60% @ 350Amps
Part No.
KUMJR350SWF
Voltage
415V
Part No.
Description
KUMJRRW180CA Razorweld Arc 180
Part No.
KUMJR500SWF
Description
Inverter Mig/MMA/Tig 500A Welder
Voltage
415V
Razorweld Arc 200 Welder
FEATURES
FEATURES
• MMA (stick electrode)
• Hot start (improves electrode
• PFC ( Power Factor Correction) for
starting)
• VRD (Voltage reduction device)
• Arc force (boosts current to prevent
electrode extinguishing)
• Excellent arc stability with all
electrodes
• Lift arc ignition (prevents tungsten
sticking during arc ignition)
• Ultra smooth DC Tig welding
current
• Thermal overload protection
• Generator compatible (recommend
9.0 KVA minimum)
• Tolerant to variable power supplies
SPECIFICATIONS
• VRD (Voltage Reduction Device)
• Hot start (improves electrode
Primary Input Voltage - 240V Single
phase
Welding current - MIG 7.7A
Rated Input Power - 9 KVA
Rated max supply current 15.3A MMA / 15.3A Tig
Rated Output 180A / 27.2V MMA / 180A / 17.2V Tig
Welding current range - 10 - 180 Amps
No load voltage - 9V
Dimensions (mm)
311L x 250W x 130H
Weight (kg): 4.7
Voltage
240V
maximum electrical efficiency
starting)
• Arc Force (boosts current to prevent
electrode extinguishing)
• Excellent arc stability with all
electrodes
• Lift Arc ignition (prevents tungsten
sticking during arc ignition)
• Ultra smooth DC TIG welding current
• Thermal overload protection
• IP21S rating for environmental/
safety protection
• Generator compatible (recommend
The ARC200 is an inverter-based
welding machine produced using the
latest in IGBT technology. This machine
is reliable, robust and stacked with
features that you can expect from a
quality welder. The DC MMA welding
capability delivers a smooth and
incredibly stable arc allowing easy
welding with electrodes producing
high quality welds including cast Iron,
stainless and low hydrogen.
Duty Cycle
30% @ 200A
Part No.
Description
KUMJRRW200CA Razorweld Arc 200
7.0 KVA minimum)
• Auto-compensation for voltage
fluctuation
• Minimal harmonic feedback to
power grid
SPECIFICATIONS
Primary Input Voltage: 240V – 15A
Ieff Current: 12A
Rated Output Current: 200A/28V MMA
Range of Output Current: 10 - 200 Amps
No Load Voltage: 9V
Protection Class: IP21S
Recommended Generator: 7 kVA min.
Dimensions (mm): 365L x 227W x 135H
Weight (kg): 6.5
Voltage
240V
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
Unimig
78
Power Supply: 415V±15%-50/60Hz
Output Current Range:
MIG/ 50A/16.5V-500A/39.0V
MMA/ 20A/20.8V-500A/40.0V
Dimensions Power Source (mm): 595L x
280W x 440H
Dimensions Wire Feeder (mm): 630L x
235W x 420H
Weight Power Source (kg): 40.6
Weight Wire Feeder (kg): 14
Duty Cycle (40ºC)
Razorweld Arc 180 Welder
Duty Cycle (40ºC)
MMA 20% @ 180Amps
TIG DC 50% @ 180AMps
This MIG Separate Wire Feeder is an
inverter-based MIG welding machine
with added MMA and TIG function.
This is an industrial machine equipped
with a separate 4 roll gear driven wire
feeder and 10m interconnecting
cables. Provides excellent arc stability
for MIG/TIG & MMA welding. Ideal for
heavy and structural applications
through to general engineers,
maintenance workshops, light
engineering.
60% @ 500 Amps MIG
60% @ 500 Amps MMA
Description
Inverter Mig/MMA/Tig 350A Welder
The Razorweld ARC180 is an inverterbased welding machine produced
using the latest in IGBT technology.
This machine is reliable, robust and
stacked with features that you can
expect from a quality welder. The DC
MMA welding capability delivers a
smooth and incredibly stable arc
allowing easy welding with electrodes
producing high quality welds including
cast Iron, stainless and low hydrogen.
Inverter Mig/MMA/Tig 500A Welder
Machines Unimig Welders
Razorweld Tig 200 Welder
Razor Digital 200 AC/DC Tig Welder
sticking during arc ignition)
• Ultra smooth DC TIG welding
current
• Thermal overload protection
• IP21S rating for
environmental/safety protection
• Generator compatible (recommend
7.0 KVA minimum)
• Auto-compensation for voltage
power grid
SPECIFICATIONS
The Razorweld Tig 200 is a Digital
Controlled square wave AC/DC TIG
inverter welder with full TIG
functionality that offers simple step by
step digital setting of functions and
parameters providing you with
complete professional control. This unit
has raised the benchmark for 240V
single phase AC/DC welders making it
ideal for multiple applications;
aluminum & stainless steel fabrication
and repair and maintenance
applications.
Primary Input Voltage: 240V – 15A
Ieff Current: 12A
Rated Output Current: 200A/18V TIG
Range of Output Current: 10 - 200
Amps
No Load Voltage: 9V
Protection Class: IP21S
Generator compatible (7kVA min)
Dimensions (mm): 365L x 227W x 135H
Weight (kg): 6.5
Duty Cycle
45% @ 200A
The RAZOR200AC/DC is a Digital
Controlled square wave AC/DC TIG
inverter welder with full TIG
functionality that offers simple step by
step digital setting of functions and
parameters providing you with
complete professional control. This unit
has raised the benchmark for 240V
single phase AC/DC welders making it
ideal for multiple applications;
aluminum & stainless steel fabrication
and repair and maintenance
applications.
Duty Cycle (40ºC)
Tig 20% @ 200A
MMA 40% @ 160A
Part No.
Description
KUMJRRW200DC Razorweld Tig 200
Voltage
240V
Part No.
KUMJRRW200AC/DC
Primary input voltage - 240V Single
phase
Ieff current - 15 amps
Power rating - 6.6 KVA
Rated output current - 200 amps
Range of output current - 10 - 200
amps
No load voltage - 62V
Pre-flow (S) - 0-15
Slope-down time (S) - 0 - 10
Post-flow time (S) - 0 - 15
Dimensions (mm): 510L x 330W x
360H
Weight (kg): 30
Description
Razor Digital 200 AC/DC Tig Welder
Machines
fluctuation
• Minimal harmonic feedback to
FEATURES
• AC/DC HF TIG/MMA Function
• 2T/4T 2S/4S Trigger Select
• AC Square Wave 20-70Hz
• AC Balance Control
• Pulse Control - 0.5 - 200Hz
• Pulse Width - 10-90%
• Base Current - 0-200A
• Up Slope 0-10 sec / Down Slope
0-10 sec
• Pre Gas 0-15 sec / Post Gas 0-15 sec
• VRD (Voltage Reduction Device)
• Arc Ignition Current - 0-200A
• Arc Ignition Time Set - 0.01-1sec
• Arc Force Select
• Remote Amperage Control
• Job Memory / Recall
SPECIFICATIONS
Section 3
FEATURES
• Lift Arc ignition (prevents tungsten
Voltage
240V
Unimig Tig AC/DC HF 315A Welder
FEATURES
Adjustable down slope
2T / 4T trigger function
Adjustable pulse control
HF start AC/DC Tig function
Adjustable pre gas - post gas
Adjustable AC balance control
Electrode hot start
Adjustable arc force
Digital amperage display
Foot control option
SPECIFICATIONS
Primary input voltage - 415V three
phase
Input frequency - 50 Hz
Input current - MMA / 18 amps
Tig / 12.6 amps
Ieff current - MMA / 13 amps
Tig / 9 amps
Rated Input Power - 12.2 KVA
Rated output current - 315 amps
Range of output current - 10 - 315 amps
Arc force - 0 – 100A
No load voltage - 30V
Pre-flow (S) - 0 - 2
Clean width - 20 – 80 %
Slope-down time (S) - 0 - 10
Post-flow time (S) - 0 - 10
Base current (%) - 20 - 90
Pulse frequency - 0.5 – 300 Hz
Pulse duty cycle - 10 – 90 %
Dimensions (mm): 560L x 365W x
355H
Weight (kg): 37
•
•
•
•
•
•
•
•
•
•
The UNITIG 315 AC/DC is a 3 phase
Square Wave AC/DC TIG inverter
welder incorporating full TIG
functionality including AC balance
control, pre gas, down slope, post gas,
variable pulse parameters, HF start
with 2/4T trigger control. This unit is an
industrial workhorse AC/DC welder
and is ideal for multiple applications
including aluminum & stainless steel
fabrication, light industrial use, repair
and maintenance applications
Duty Cycle (40ºC)
Tig 20% @ 300A / 100% @ 160A
MMA 20% @ 250A / 100% @ 160A
Part No.
Description
KUMJR315AC/DC Unimig Tig AC/DC HF 315A Welder
KUMJR315WC
Unimig Tig AC/DC HF 315A Welder with Water Cooler
and Trolley
Voltage
415V
415V
Be confident...
Select
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
79
Unimig
Machines Tungsten Electrode Grinders
Section 3
Machines
Nuetrix Portable Tungsten Grinder
A portable precision Tungsten Grinder
that has a built-in dust collection
system with a long life diamond
grinding wheel that is easy to operate
and supplied in a case fully equipped
for use. A complete kit for high quality,
repeatable dust free tungsten
electrode grinding.
Part No.
88896022
FEATURES
FEATURES
• Electrode clamps for 1.6, 2.4,
•
•
•
•
•
3.2mm tungsten included.
• Degree scale lets you set your grind
angle and lock it into place
• Diamond wheel grinds longitudinally
for a steady arc and optimal
performance
• Easy to use electrode
positioning/locking device holds
tungsten securely in place
• Grind tapers from 15° to 180°
• Integrated filter cartridge captures
all tungsten dust
• Variable grinding position to
maximize life of the diamond
grinding wheel
• Disposable cartridge safely collects
all dust particles
• Meets strict EU environmental
regulations, capturing dust at the
source
SPECIFICATIONS
Power supply - 240V 50Hz
Motor: 850W
RPM: 28000
Weight (kg): 2.8
Description
Nuetrix Portable Tungsten Grinder
Voltage
240V
Ultima Tig-S Bench Mounted
Wet Tungsten Grinder
FEATURES
•
•
•
•
•
Easy to use
Perfect grinding & flattening angles
Stepless angle adjustment
Liquid cooled
Standard unit includes grinder
complete with table, diamond disc
and grinding liquid, electrode holder
for Ø0,8 - 4,0 and Ø4,8 - 8,0 mm,
electrode clamps for
Ø1,6/2,4/3,2/4,8/5,3 and 6,4 mm
electrodes (clamps are available for
other electrode sizes)
• Sealed disposable container for toxic
dust collection (eco-friendly waste
control)
SPECIFICATIONS
The patented wet grinder ULTIMA-TIGS provides ground Tungsten electrodes
for TIG-welding in a safe and
environmentally friendly way moreover,
it reduces the waste of electrodes
substantially. The combination of liquid
for cooling and high grinding speed of
the diamond disc results in a polished
and even surface of the tungsten
electrode. A unique disposable
container collects all toxic dust
particles eliminating the need for
separate exhaust systems.
Motor voltage: 240V,50Hz
Motor: 280W
RPM: 8500
Grinding speed: 44 m/sec
Electrode capacity: 0.8–8.0mm
Min. length: 15mm (8.0mm with
special clamps & max Ø4.0mm)
Angles: 7.5°–90° grinding angle
(equal to 15°–180° tip angle)
Description
Ultima Tig-S Tungsten Grinder
Easy to use
Perfect grinding & flattening angles
Stepless angle adjustment
Liquid cooled
Standard unit includes grinder
complete with table, diamond disc
and grinding liquid, electrode holder
for Ø0,8 – 4.0mm, electrode clamps
for Ø1.6/2.4/3.2 mm electrodes
• Sealed disposable container for toxic
dust collection (eco-friendly waste
control)
SPECIFICATIONS
The patented wet grinder ULTIMA-TIG
provides ground Tungsten electrodes
for TIG-welding in a safe and
environmentally friendly way moreover,
it reduces the waste of electrodes
substantially. The combination of liquid
for cooling and high grinding speed of
the diamond disc results in a polished
and even surface of the tungsten
electrode. A unique disposable
container collects all toxic dust
particles eliminating the need for
separate exhaust systems.
Part No.
88897022
Motor voltage: 240V,50Hz
Motor: 380W
RPM: 8500
Grinding speed: 44 m/sec
Electrode capacity: 0.8–3.2mm
Min. length: 15mm
Angles: 7.5°–90° grinding angle
(equal to 15°–180° tip angle)
Description
Ultima Tig Bench Mounted Wet Tungsten Grinder
Voltage
240V
Did you know...
RADIOACTIVE
Thoriated Tungsten
Electrodes contain
the element of Thorium?
Whilst they only contain 2% Thorium
it is a radioactive material that can
create health risks and disposal risks,
and it must be treated with respect.
• Tungsten Grinders help meet
your OH&S obligations today.
• Tungsten Grinders capture
100% waste at the source.
• Tungsten Grinders allow easy,
efficient disposal of waste.
• Tungsten Grinders give
accurate results everytime.
Voltage
240V
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
Grinders
80
Part No.
88897422
Ultima Tig Bench Mounted
Wet Tungsten Grinder
Machines Stud Welders
Taylor Stud Welder CDM8
Description
Taylor Stud Welder CDM8
Voltage
240V
As a compact, portable capacitor
discharge stud welding machine with
its simple and robust design it offers an
economic and reliable method of fixing
studs. Fast, accurate and easy to
operate it gives you better results.
Part No.
CDM10
Taylor Stud Welder DA800
This compact, manoeuvrable Drawn
Arc equipment is designed to weld up
to 12mm diameter reduced base studs.
With its simple, robust construction the
System 800 offers an economical and
reliable method of fixing Mild Steel and
Stainless Steel studs.
Fast, accurate and easy to operate, the
System 800 gives you better weld
results.
Part No.
DA800
Description
Taylor Stud Welder
Description
Taylor Stud Welder CDM10
FEATURES
• Compact, lightweight portable
machine
• Strong, robust construction
• Rapid welding action reduces weld
time
• Super fast recharge time improves
profitability
• Easy adjustment of capacitor voltage
• LED displays allow easy monitoring
of functions
• Welds Mild Steel, Stainless Steel,
Aluminium and Brass
SPECIFICATIONS
Welding Range:
Mild Steel: 2-10mm
Stainless Steel: 2-10mm
Aluminium: 2-6mm
Zintec: 2-8mm
Mains Input: 115 and 230V AC, 50 60Hz, 1 Phase
Input Power: 1.8KVA
Input Fuse Rating: 16A at 115V, 19A at
230V
Output Voltage: 35 - 200V
Output Power: Source Electrolytic
Capacitors
Welding Rate: 10 - 50 Studs per min
Welding Stud Range: 2 - 10mm
Enclosure Class: IP31 Protection
Nominal Capacitance: 132,000mf
Dimensions (mm): 425L x 172W x
280H
Weight (kg): 18.5
Machines
Part No.
CDM8
FEATURES
• Compact, lightweight portable
machine
• Strong, robust construction
• Rapid welding action reduces weld
time
• Super fast recharge time improves
profitability
• Easy adjustment of capacitor voltage
• LED displays allow easy monitoring
of functions
• Welds Mild Steel, Stainless Steel,
Aluminium and Brass
SPECIFICATIONS
Welding Range:
Mild Steel: 2-8mm
Stainless Steel: 2-8mm
Aluminium: 2-6mm
Zintec: 2-6mm
Mains Input: 115 and 230V AC, 50 60Hz, 1 Phase
Input Power: 1.8KVA
Input Fuse Rating: 16A at 115V, 19A at
230V
Output Voltage: 35 - 200V
Output Power: Source Electrolytic
Capacitors
Welding Rate: 10 - 50 Studs per min
Welding Stud Range: 2 - 8mm
Enclosure Class: IP31 Protection
Nominal Capacitance: 66’000mfd
Dimensions (mm): 425L x 172W x
280H
Weight (kg): 16
Section 3
As a compact, portable capacitor
discharge stud welding machine with
its simple and robust design it offers an
economic and reliable method of fixing
studs. Fast, accurate and easy to
operate it gives you better results every
time.
Taylor Stud Welder CDM10
Voltage
240V
Taylor Stud Welder DA1200
FEATURES
• Robust and compact design housing
all components in one cabinet
• Lightweight and portable
• Infinitely adjustable welding time
• Solid state switching
• Visual time display
• Recessed front and back panels to
protect controls and weld sockets
• Twist and lock weld plugs and
sockets
• Handtool can use any UK or
European chucking system
• Gun lift test facility
• Chuck saver circuit fitted
• Fitted with gas facility
SPECIFICATIONS
Welding Stud Range: 3-10.8mm
Mains Input: 400V AC, 50Hz, 3 Phase
Input Fuse Rating: 32A
Max. KVA Rating: 30KVA
Welding Current (10% cycle):
800Amps
Welding Time (m/sec): 20-500
Welding Rate: 20-3/min
No-Load Voltage: 58V DC
Class Protection: IP23
Cooling: Fan cooled
Transformer Insulation Class: H
Dimensions (mm): 520L x 230W x
280H
Weight (kg): 32
Voltage
415V
Compact, manoeuvrable Drawn Arc
equipment designed to weld up to
16mm diameter studs. With its simple,
robust construction the System 1200E
offers an economical and reliable
method of fixing Mild Steel and
Stainless Steel studs.
Fast, accurate and easy to operate, the
System 1200E gives you better weld
results.
Part No.
DA1200
Description
Taylor Stud Welder
FEATURES
• Robust and compact design housing
all components in one cabinet
• Infinitely adjustable welding time
• Solid state switching
• Visual time display
• Recessed front and back panels to
protect controls and weld sockets
• Twist and lock weld plugs and
sockets
• Handtool can use any UK or
European chucking system
• Gun lift test facility
• Chuck saver circuit fitted
• Fitted with gas facility
• Mounted on 4 wheels for
manoeuvrability
• Visual current and time display
• Current reporting procedure
• Constant current control
SPECIFICATIONS
Welding Stud Range: 3-14.6mm
Mains Input: 400V AC, 50Hz, 3 Phase
Input Fuse Rating: 65A
Max. KVA Rating: 65KVA
Welding Current (10% cycle): 200 - 1200
Amps
Welding Time (m/sec): 20 - 500
Welding Rate: 20 - 3/min
No-Load Voltage: 95V DC
Class Protection: IP23
Cooling: Fan cooled
Transformer Insulation Class: H
Dimensions (mm): 550L x 400W x 560H
Weight (kg): 108
Voltage
415V
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
81
Stud Welders
Machines Stud Welders
Section 3
Machines
Taylor Stud Welder DA1600
Compact, manoeuvrable Drawn Arc
equipment designed to weld up to
20mm diameter studs. With its simple,
robust construction the System 1600E
offers an economical and reliable
method of fixing Mild Steel and
Stainless Steel studs. Fast, accurate and
easy to operate, the System 1600E
gives you better weld results
Part No.
DA1600
Taylor Stud Welder DA2000
FEATURES
FEATURES
• Robust and compact design housing all
components in one cabinet
• Infinitely adjustable welding time
• Solid state switching
• Visual time display
• Recessed front and back panels to
protect controls and weld sockets
• Twist and lock weld plugs and sockets
• Handtool can use any UK or European
chucking system
• Gun lift test facility
• Chuck saver circuit fitted
• Fitted with gas facility
• Mounted on 4 wheels for
manoeuvrability
• Visual current and time display
• Current reporting procedure
• Constant current control
• Robust and compact design housing all
components in one cabinet
• Infinitely adjustable welding time
• Solid state switching
• Visual time display
• Recessed front and back panels to
protect controls and weld sockets
• Twist and lock weld plugs and sockets
• Handtool can use any UK or European
chucking system
• Gun lift test facility
• Chuck saver circuit fitted
• Fitted with gas facility
• Mounted on 4 wheels for
manoeuvrability
• Visual current and time display
• Current reporting procedure
• Constant current control
SPECIFICATIONS
Welding Stud Range: 3mm to 20mm
Mains Input: 400V AC, 50Hz, 3 Phase
Input Fuse Rating: 65A
Max. KVA Rating: 65KVA
Welding Current (10% cycle): 200 - 1600
Amps
Welding Time (m/sec): 20 - 1500
Welding Rate: 20 - 4/min
No-Load Voltage: 95V DC
Class Protection: IP23
Cooling: Fan cooled
Transformer Insulation Class: H
Dimensions (mm): 810L x 470W x 620H
Weight (kg): 15
Description
Taylor Stud Welder
Voltage
415V
Taylor Stud Welder DA2400
Robust manoeuvrable Drawn Arc
equipment designed to weld large
studs up to 22mm in diameter. With
their simple construction this range of
equipment offers an economical and
reliable method of fixing Mild Steel and
Stainless Steel studs. Fast, accurate and
easy to operate, this range of heavy
duty equipment gives you better weld
results.
Part No.
DA2000
Description
Taylor Stud Welder
SPECIFICATIONS
Welding Stud Range: 5mm to 22mm
Mains Input: 400V AC, 50Hz, 3 Phase
Input Fuse Rating: 100A
Max. KVA Rating: 85KVA
Welding Current (10% cycle): 300-2000
Amps
Welding Time (m/sec): 50-1500
Welding Rate:30-4/min
No-Load Voltage: 95V DC
Class Protection: IP23
Cooling: Fan cooled
Transformer Insulation Class : H
Dimensions (mm): 1000L x 610W x 840H
Weight (kg): 313
Voltage
415V
Machine hire available...
FEATURES
• Robust and compact design housing all
components in one cabinet
• Infinitely adjustable welding time
• Solid state switching
• Visual time display
• Recessed front and back panels to
protect controls and weld sockets
• Twist and lock weld plugs and sockets
• Handtool can use any UK or European
chucking system
• Gun lift test facility
• Chuck saver circuit fitted
• Fitted with gas facility
• Mounted on 4 wheels for
manoeuvrability
• Visual current and time display
• Current reporting procedure
• Constant current control
Robust manoeuvrable Drawn Arc
equipment designed to weld large
studs up to 25mm in diameter. With
their simple construction this range of
equipment offers an economical and
reliable method of fixing Mild Steel and
Stainless Steel studs. Fast, accurate and
easy to operate, this range of heavy
duty equipment gives you better weld
results.
Part No.
DA2400
Description
Taylor Stud Welder
Voltage
415V
Call today to discuss your options
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
Stud Welders
82
SPECIFICATIONS
Welding Stud Range: 6mm to 25mm
Mains Input: 400V AC, 50Hz, 3 Phase
Input Fuse Rating: 125A
Max. KVA Rating: 120KVA
Welding Current (10% cycle): 400 2400Amps
Welding Time (m/sec): 50-1500
Welding Rate: 30-6/min
No-Load Voltage: 95V DC
Class Protection: IP23
Cooling: Fan cooled
Transformer Insulation Class: H
Dimensions (mm): 1000L x 610W x 840H
Weight (kg): 385
Machines Stud Guns
CDM Contact Stud Gun
Welding Range: 2mm to 10mm
Stud Length Range:
Standard - up to 35mm
Extended - Any Length
Handtool Length: 202mm
Cable Length (mm): 3
Handtool Weight (kg):1.9
DA5 Hand Stud Gun
Part No
99101025
•
•
•
•
•
•
•
Description
DA5 Hand Stud Gun
Welding Range: 6mm to 25mm
Stud Length Range:
Standard - up to 100mm
Extended - Any Length
Handtool Length: 250mm
Cable Length (mm): 5
Handtool Weight (kg):1.9
Part No
99101023
•
•
•
•
•
•
•
Description
DA3 Hand Stud Gun
Welding Range: 3mm to 16mm
Stud Length Range:
Standard - up to 100mm
Extended - Any Length
Handtool Length: 250mm
Cable Length (mm): 5
Handtool Weight (kg):1.9
DA6 Hand Stud Gun
Part No
99101026
•
•
•
•
•
•
•
Description
DA6 Hand Stud Gun
Part No
99101024
•
•
•
•
•
•
•
Description
DA4 Hand Stud Gun
Welding Range: 6mm to 25mm
Stud Length Range:
Standard - up to 100mm
Extended - Any Length
Handtool Length: 250mm
Cable Length (mm): 5
Handtool Weight (kg):1.9
Machines
•
•
•
•
•
•
•
Description
CDM Contact Stud Gun
DA4 Hand Stud Gun
Section 3
Part No
99100020
DA3 Hand Stud Gun
For all stud
requirements…
Welding Range: 6mm to 25mm
Stud Length Range:
Standard - up to 100mm
Extended - Any Length
Handtool Length: 250mm
Cable Length (mm): 5
Handtool Weight (kg):1.9
Call
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
83
Stud Guns
Machines Fume Extraction
Section 3
Machines
Clearmaster Fume Extractor
FEATURES
FEATURES
• Fume extraction unit with
mechanical filter and 360° pivoting
arm
• 4 stage filtering system
• Includes activated carbon filter
• Guarantees a separation efficiency
over 99%
• Includes filter elements, 3m suction
arm hose type (Ø150mm) with
internal self support joints and hood
SPECIFICATIONS
• Cartridge filter unit with extra
particle pocket filter
• Guarantees a separation efficiency
over 99%
• Includes filter element, 2 x 3m
suction arm hose type (ø150mm)
with internal joints and hood
SPECIFICATIONS
Max volume flow: 3500m³/hr
Pressure: 2500pa
Motor: 2.2kw / 3 phase
Voltage: 415V
Dimensions (mm): 665W x 681D x
1365H
Weight: 185kg
Max volume flow: 2500m³/hr
Pressure: 2500pa
Motor: 1.1kw motor / 1 phase
Voltage: 240V
Dimensions (mm): 580W x 508D x
900H
Weight: 72kg
Part No.
978002
Description
Clearmaster Fume Extractor
Voltage
240V
Torchmaster HK Auto Start/Stop
Fume Extractor
e
effectiv
Highly
t
wi h
used
n
n
e
h
w
ractio
g Ext low
a
M
/
Mig
ee be
es. S options
h
c
r
o
T
orch
for T
Part No.
97015101
974001010400
Description
Cartmaster Single Hose Fume Extractor
Cartmaster Twin Hose Fume Extractor
Voltage
415V
415V
Fanmaster 2000 Extraction Fan
FEATURES
FEATURES
• High vacuum cartridge filter unit for
suction of fumes and dust at the
source
• Automatic start/stop via electric
current sense technology
• Fully variable speed control
• Guarantees a separation efficiency
over 99%
• 2 x 50mm diameter inlet
• Also available with fully automatic
filter cleaner option
SPECIFICATIONS
• Reliable and dependable
• Static and dynamic balanced
impellers
• Ø160mm intake nozzle
• 3500 model has Ø250 intake nozzle
• Available in 240 & 415 voltage
models
• Made in Germany
SPECIFICATIONS
Motor (Kw):
9610123 - 0.74 (1 phase)
9610223 - 1.1(1 phase)
961024 - 1.1(3 phase)
961044 - 2.2 (3 phase)
Capacity (m³/hr):
9610123 - 2000
9610223 - 2500
961024 - 2500
961044 - 3500
Dimensions (mm):
9610123 - 449W x 438D x 410H
9610223 - 449W x 438D x 410H
961024 - 449W x 438D x 410H
961044 - 615W x 650D x 570H
Weight (kg):
9610123 – 27
9610223 – 27
961024 - 27
961044 - 45
Max volume flow: 280m³/hr
Pressure: Up to 21000pa
Motor: 1.1kw / 1 phase
Voltage: 240V
Dimensions (mm): 300W x 300D x
679H
Weight: 25kg
Part No.
Description
9790155597
Torchmaster HK Auto Start/Stop Fume Extractor
612.2023
Binzel 24KD Extraction Torch - 4.0m
614.2023
Binzel 36KD Extraction Torch - 4.0m
Note: Torch not included with extraction unit.
Voltage
240V
Part No.
9610123
9610223
961024
961044
Description
Fanmaster 2000 Extraction Fan
Fanmaster 2500 Extraction Fan
Fanmaster 2500 Extraction Fan
Fanmaster 3500 Extraction Fan
Voltage
240
240
415
415
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
Fume Extraction
84
Cartmaster Fume Extractor
Machines Fume Extraction
Pivoting Suction Arm
Description
Pivoting Suction Arm
Pivoting Suction Arm
Pivoting Suction Arm
Length (mm)
2.0
3.0
4.0
Diam (mm)
150
150
150
Part No Description
96317
250mm Hopper Nozzle - Torchmaster
300mm Slit Nozzle
Part No Description
96318
300mm Slit Nozzle - Torchmaster
• 250mm wide with magnetic base
• 300mm wide with magnetic base
600mm Slit Nozzle
Spark Arrestor
Section 3
Part No
97601
97602
97603
250mm Hopper Nozzle
• Flexible PVC with welded steel wire core
Machines
• Temperature resistant up to 120ºC
• Available in custom lengths up to 12.0m
• For wall assembly suction fans
100mm Round Nozzle
Part No Description
963171 100mm Round Nozzle - Torchmaster
• 100mm diameter with magnetic base
Part No Description
963186 600mm Slit Nozzle - Torchmaster
• 600mm wide with magnetic base
Part No
95014901601
Description
Spark Arrestor
• Suits Ø150mm hose
85
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
Fume Extraction
Section 3
Machines
Machines Fume Extraction
Part No
978003
978004
978005
978006
10032
10029
10034
100008
97053
100281
97901120
10030252
10025
97056
10030250
951005
Description
Coarse Filter Set
Pre-Filter Mat
Particle Filter
Activated Carbon Filter
Pre-Filter Mats
Particle Filter
Pocket Filter
Aluminium Pre-Filter
Activated Carbon Filter
Cartridge Filter
Activated Carbon Filter
Dust Collection Bags
Cartridge Filter - 10m2
Activated Carbon Filter
Dust Collection Bag
Precoat (1kg)
Applicable Model
Clearmaster 978002
Clearmaster 978002
Clearmaster 978002
Clearmaster 978002
Cleanmaster 96430101
Cleanmaster 96430101
Cleanmaster 96430101
Cleanmaster 96430101
Cleanmaster 96430101
Torchmaster 9790155597
Torchmaster 9790155597
Torchmaster 9790155597
Cartmaster
Cartmaster
Cartmaster
Cartmaster
Qty
10
1
1
1
10
1
1
1
1
1
1
10
1
1
1
1
Stop fuming...
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
Fume Extraction
86
We have solutions.
Machines Alfra Drills
Alfra Piccolo Magnetic Base Drill
Alfra Mini Set Magnetic Base Drill
50mm Core drill capacity
50mm core cutting depth
12,000N magnetic adhesion
Rota tool-less quick change system
Solid brass guides
Durable keyboard
2 Speed, oil bath gear box
Includes transport case, safety strap
and coolant unit
SPECIFICATIONS
Motor (W): 1100
Speed(RPM): 450
Magnetic adhesion(N): 8,600
Depth of stroke(mm): 132
Motor height adjustment (mm): 106191
Weight (kg): 10.6
Part No.
18500
Description
Alfra Piccolo Magnetic Base Drill
Voltage
240V
Alfra New Gen Magnetic Base Drill
Motor (W): 1200
Speed (RPM): 250/450
Magnetic adhesion (N): 12,000N
Depth of stroke (mm): 145mm
Motor height adjustment (mm): 114229
Weight (kg): 15
Part No.
18510
Description
Alfra Mini Set Magnetic Base Drill
FEATURES
FEATURES
•
•
•
•
•
•
•
•
50mm Core drill capacity
50mm core cutting depth
16,000N magnetic adhesion
Rota tool-less quick change system*
Tapping capacity up to M20
Solid brass guides
Durable keyboard
Includes transport case, safety strap
and coolant unit
SPECIFICATIONS
80mm Core drill capacity
110mm core cutting depth
20,000N magnetic adhesion
Tapping capacity up to M30
Twist drill capacity up to 32mm
Solid brass guides
Durable keyboard
Includes transport case, safety strap
and MT drift
• Coolant unit, tool holder and cutter
optional extras
SPECIFICATIONS
Motor (W): 1200
Speed (RPM):
18610- (2 speed) 250/450
18611- (2 speed variable) 100/250,
180/450
Magnetic adhesion (N): 16,000
Depth of stroke (mm): 170
Motor height adjustment (mm): 160260
Weight (kg): 16
Voltage
240V
240V
Voltage
240V
Alfra Junior Magnetic Base Drill
•
•
•
•
•
•
•
•
Part No.
Description
18610
Alfra New Gen 50 RG Magnetic Base Drill
18611
Alfra New Gen 50 RL-E Magnetic Base Drill (variable speed)
* 18610 only - 18611 uses tool holder
Machines
FEATURES
•
•
•
•
•
•
•
•
40mm Core drill capacity
50mm core cutting depth
Fits standard length drills
Solid brass guides
Durable keyboard
Includes transport case, safety strap
and coolant unit
SPECIFICATIONS
Section 3
FEATURES
•
•
•
•
•
•
Motor (W): 1800
Speed (RPM):
18625- (4 speed) 100, 175, 245, 385
18626- (4 speed variable) 50/110,
75/175, 105/245, 165/385
Magnetic adhesion (N): 20,000
Depth of stroke (mm): 195
Motor height adjustment (mm): 226286
Weight (kg): 22
Part No.
18625
18626
Description
Alfra Junior Taper Magnetic Base Drill
Alfra Junior RL-E Magnetic Base Drill (variable speed)
Voltage
240V
240V
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
87
Alphra Drills
Machines Alfra Drills
Section 3
Machines
Alfra Master Taper Magnetic
Base Drill
Alfra V32 Compact
FEATURES
FEATURES
• 100mm Core drill capacity
• 110mm core cutting depth
• Magnetic Power Increase at the start
of the drilling operation
• Oil bath gear box
• No. 3 Morse taper
• Tapping capacity up to M30
• Twist drill capacity up to 40mm
• Adjustable magnet foot - 30° left to
right & 10mm forward & back
• Includes transport case with wheels,
safety strap, MT drift
• Coolant unit, tool holder and cutter
optional extras
SPECIFICATIONS
•
•
•
•
32mm Core drill capacity
25mm Core Drilling depth
16,000N magnetic adhesion
Includes: Plastic Transport Case,
Safety Belt, Coolant Unit, 18mm
Cutter and Pin (1924500)
SPECIFICATIONS
Motor (W): 900
Speed (RPM): 450
Magnetic adhesion (N): 16,000
Depth of stroke (mm): 45
Motor height adjustment (mm): 185227
Weight (kg): 12.5
Motor (W): 2500
Speed (RPM): 100/175/245/385
Magnetic adhesion (N): 20,000
Depth of stroke (mm): 245
Motor height adjustment (mm): 295400
Weight (kg): 28
Part No.
18635
Description
Alfra Master Taper Magnetic Base Drill
Voltage
240V
Part No.
18710
Description
Alfra V32 Compact
Voltage
240V
Alfra Vacuum Attachment
FEATURES
• Assists in swarf containment
• Suits all drill models
• Use on non-magnetic surfaces such
as aluminium, copper, stainless
steel, plastics, structured materials
(e.g. bulb or checker plate)
• Includes: Pump, vacuum plate & 3m
vacuum hose
SPECIFICATIONS
Pump Motor: 230 V, 50 Hz)
Vacuum capacity: 1.5 m³/h – 25 l/min.
Max vacuum: 200 mbar (abs)
Overpressure: 300 mbar
Dimension: 400 x 200 mm
Description
Alfra Vacuum Attachment
Voltage
240V
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
Alphra Drills
88
Part No.
18150
refer to
93
page 1
tting
for cu s
fluid
Machines Alfra Accessories
Part No
18003
18025
Description
AMK-2 Tool Holder
AMK-3 Tool Holder
Part No
18003-L
Description
AMK2L Arbor
Part No
18008
18009
Part No
18019
Part No
18020
Part No
18021
18022
Part No
18023
Description
MT3 - MT2 Sleeve
Part No
18103
18104
Description
Coolant Bottle to suit V32
Coolant Unit
Part No
18106
Description
Keyed Drill Chuck 1-13mm inc Adaptor
Part No
18107
Description
Keyless Drill Chuck 1-13mm inc Adaptor
Part No
18652
18653
Description
Tapping Chuck M3-M12
Tapping Chuck M10-M20
Part No
18654
Description
Magnetic Swarf Remover
Part No
20201
20202
Description
AFW Adaptor – Weldon to M18 x 6P 1.5 Fein
Adaptor M18 x 6P1.5 to Weldon to suit Fein
Part No
20204
Description
Adaptor – Weldon to Fein-Quick-in
Part No
20205
Description
Weldon to Rotaquick Adaptor
Machines
Description
Safety Strap
Section 3
Part No
14950
Description
Drill Chuck MT2
Drill Chuck MT3
Description
Pipe Clamping Attachment 80-300mm
Description
Pipe Clamping Attachment 80-900mm
Description
Pipe Clamping Attachment 2 Tension Belt 80-900mm
Pipe Clamping Attachment 2 Tension Belt 80-2000mm
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
89
Alfra Drills
Section 3
Part No
20206
Description
Extension Arbor & Pin
Part No
20230
20240
Description
AL-3 Tool Holder
AL-4 Tool Holder
Part No
21003
21025
Description
AMT 2 Arbor
AMT 3 Arbor
Part No
21105
Part No
21106
90
Part No
1924500
Description
RA 359 Large Head Pin
Part No
1925500
Description
RA 359 Alfra Pin
Part No
1926500
Description
RA 359B Kreüz Pin
Part No
1950500
Description
RA 360 Kreüz Pin
Part No
2001500
Description
RA 363 Alfra Pin
Part No
2001501
Description
RA 362 Alfra Pin
Part No
2001502
Description
RA 367 Ø8 x 160mm Alfra Pin
Description
Chuck Adaptor only
Description
AS 13 Drill Arbor
Part No
21108
Description
ALW Adaptor AL to Weldon
Part No
28107
Description
Heavy Duty Chuck & Adaptor
Part No
18533
Description
Countersink & Deburrer - 25mm
Part No
18534
Description
Countersink & Deburrer – 40mm
!
y
s
a
e
t
i
e
We mak
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
Alfra Accessories
Machines
Machines Alfra Accessories
Machines Core Drill Bits
Core Drills
HSS-Co – High Speed Steel with Cobalt
Longer lasting with 5% Cobalt
Will drill harder materials
Multi-fit shank to fit all Mag Base Drills
Universal pin - one pin fits all cutters
Re-sharpenable
Thinner wall provides faster drilling & less power to drive
Suitable for drilling Mild Steels, Structural Steels, Stainless Steels, Aluminium, Alloys, Copper, Brass
6700
6701
6702
6703
6704
6705
6706
6707
6708
6709
6710
6711
6712
6713
6714
6715
6716
6717
6718
6719
6720
6721
6722
6723
6724
6725
6726
6727
6728
6729
6730
6731
6732
6733
6734
6735
6736
6737
6738
6739
6740
6741
6742
6743
6744
6745
6746
6747
6748
6749
6750
6751
Description
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
Diameter
x Depth of
Cut
12 X 25
12 X 50
13 X 25
13 X 50
14 X 25
14 X 50
15 X 25
15 X 50
16 X 25
16 X 50
17 X 25
17 X 50
18 X 25
18 X 50
19 X 25
19 X 50
20 X 25
20 X 50
21 X 25
21 X 50
22 X 25
22 X 50
23 X 25
23 X 50
24 X 25
24 X 50
25 X 25
25 X 50
26 X 25
26 X 50
27 X 25
27 X 50
28 X 25
28 X 50
29 X 25
29 X 50
30 X 25
30 X 50
31 X 25
31 X 50
32 X 25
32 X 50
33 X 25
33 X 50
34 X 25
34 X 50
35 X 25
35 X 50
36 X 25
36 X 50
37 X 25
37 X 50
Part No
6752
6753
6754
6755
6756
6757
6758
6759
6760
6761
6762
6763
6764
6765
6766
6767
6768
6769
6770
6771
6772
6773
6774
6775
6776
6777
6778
6779
6780
6781
6782
6783
6784
6785
6786
6787
Description
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
HSS-CO Core Drill
Diameter
x Depth of
Cut
38 X 25
38 X 50
39 X 25
39 X 50
40 X 25
40 X 50
41 X 25
41 X 50
42 X 25
42 X 50
43 X 25
43 X 50
44 X 25
44 X 50
45 X 25
45 X 50
46 X 25
46 X 50
47 X 25
47 X 50
48 X 25
48 X 50
49 X 25
49 X 50
50 X 25
50 X 50
51 X 50
52 X 50
53 X 50
54 X 50
55 X 50
56 X 50
57 X 50
58 X 50
59 X 50
60 X 50
Machines
Part No
Section 3
FEATURES
•
•
•
•
•
•
•
•
ant,
Import ills use
r
mm d 926500
5
2
r
o
F
rt no 1 s use
pin pa
ill
m dr 50500
m
0
5
o 19
For
art n
p
)
n
i
p
page
s
u
o
i
(prev
91
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
Alfra Accessories
Section 3
Machines
Machines Core Drill Bits
12pc Core Drill Sets - 25mm
Depth
Part No
Description
1904005025 Core Drill Sets
-12/25
Size
Part No
12 pc x 25mm
1904005050 Core Drill Sets
-12/50
• Suitable for drilling Mild steels, Structural steels,
Stainless steels, Aluminium, Alloys, Copper and
Brass
• Includes: 12 pieces – 1 x 13mm, 2 x 14mm,
1 x 16mm, 2 x 18mm, 1 x 20mm, 2 x 22mm,
1 x 26mm, 2 Ejector pins, Heavy duty plastic case
7pc Core Drill Sets - 50mm
Depth
Part No
Description
1904006050 Core Drill Sets
-1/50
12pc Core Drill Sets - 50mm
Depth
Size
Description
7pc Core Drill Sets - 25mm
Depth
Size
Part No
12 pc x 50mm
1904006025 Core Drill Sets
-7/25
• Suitable for drilling Mild Steels, Structural steels,
Stainless steels, Aluminium, Alloys, Copper and
Brass
• Includes: 12 pieces – 1 x 13mm, 2 x 14mm,
1 x 16mm, 2 x 18mm, 1 x 20mm, 2 x 22mm,
1 x 26mm, 2 Ejector pins, Heavy duty plastic case
Description
Size
7 pc x 25mm
• Suitable for drilling Mild steels, Structural steels,
Stainless steels, Aluminium, Alloys, Copper and
Brass
• Includes: 7 pieces – 1 x 13mm, 1 x 14mm,
1 x 16mm, 1 x 18mm, 1 x 22mm, 1 x 26mm,
1 Ejector pin, Heavy duty plastic case
Can’t find it?
7 pc x 50mm
• Suitable for drilling Mild steels, Structural steels,
Stainless steels, Aluminium, Alloys, Copper and
Brass
• Includes: 7 pieces – 1 x 13mm, 1 x 14mm, 1 x
16mm, 1 x 18mm, 1 x 22mm, 1 x 26mm,
1 Ejector pin, Heavy duty plastic case
Tel: 08 9456 8000 Fax: 08 9456 8001 www.alphaweld.com.au [email protected]
Core Drill Bits
92
Call Alphaweld today!
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement