KDC-BT6544U KDC-BT6544UY KDC-BT6044 KDC

KDC-BT6544U KDC-BT6544UY KDC-BT6044 KDC
CD-RECEIVER
KDC-BT6544U
KDC-BT6544UY
KDC-BT6044
KDC-BT6144
KDC-W5544U
KDC-W5644U
INSTRUCTION MANUAL
© B64-4317-00/02 (EW/E2W/E0/E20)
B64-4317-00_02_E_English.indd 1
09.1.6 9:32:31 AM
Contents
Before use
3
Basic Operation
4
Function Control
6
⁄
• Read through this page first for the setting of each
function.
Display Settings
10
Text Display Selection
Auxiliary Input Display Setting
Music disc/Audio file Operation
11
Music Search
Music Search for iPod
All Random
iPod Control by Hand Mode
Direct Music Search
Direct Disc Search
Basic Operation of Disc Changer (Optional)
Tuner Operation
14
Activating Security Code
Deactivating Security Code
Manual Clock Adjustment
Demonstration mode setting
2 |
Audio Adjustments (DSP)
23
Cabin selection
Speaker Setting
DTA (Digital Time Alignment) setting
X’Over setting
Equalizer Control
Preset position selection
Audio Preset Memory
Audio Preset Recall
26
Preset Memory
Preset Recall
Preset Memory Delete
Name Setting
Bluetooth Setup
16
Before Use
Receiving a call
During a call
Call waiting
Other functions
Making a call
Dial a number
Speed dialing (Preset dial)
Calling a number in the Phone Book
Calling a number in the call log
Make a voice dialing call
Registering to the Preset Dial Number List
Display of phone number type (category)
Other Functions
20
Audio Control
Adjusting the detail of Audio Control
Audio Setup
Speaker Setting
Audio Preset Memory
Audio Preset Recall
Favorite Control
Auto Memory Entry
PTY (Program Type)
Program Type preset
Changing Language for PTY Function
Preset Tuning
Direct Access Tuning
Operation of hands-free phoning
Audio Adjustments
28
Registering Bluetooth device
Registering Special Bluetooth device
Registering PIN Code
Downloading the Phone Book
Selecting the Bluetooth device You Wish to
Connect
Deleting a Registered Bluetooth device
Displaying the Firmware Version
Adding a voice dialing command
Setting a Voice Command for Category
SMS (Short Message Service)
Downloading the SMS
Basic Operations of remote control 33
Appendix
35
Accessories/ Installation Procedure 39
19
Connecting Wires to Terminals
40
Installation/Removing the Unit
42
Troubleshooting Guide
43
Specifications
45
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 2
09.1.6 9:32:31 AM
Before use
2WARNING
To prevent injury or fire, take the following
precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
Before using this unit for the first time
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
<Demonstration mode Setting> (page 20).
How to reset your unit
• If this unit or the connected unit (disc auto changer,
etc.) fails to operate properly, press the Reset button.
The unit returns to factory settings when the Reset
button is pressed.
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check with
your Kenwood dealer to make sure that they work
with your model and in your area.
• The characters which can be displayed by this unit
are A-Z 0-9 @ “ ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { } |
~.
• The RDS feature won’t work where the service is not
supported by any broadcasting station.
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
Handling CDs
Reset button
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with
a cloth moistened with neutral cleaner, then wipe it
again with a clean soft dry cloth.
¤
• Do not touch the recording surface of the CD.
• Do not stick tape etc. on the CD, or use a CD with
tape stuck on it.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
• When removing CDs from this unit, pull them out
horizontally.
• If the CD center hole or outside rim has burrs,
use the CD only after removing the burrs with a
ballpoint pen etc.
CDs that cannot be used
• CDs that are not round cannot be used.
• Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth or
using a volatile liquid such as thinner or alcohol may scratch
the surface or erases characters.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty, wipe
them with a clean soft dry cloth.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
CD player of the unit. Called lens fogging, this
condensation on the lens may not allow CDs to play.
In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not
operate normally after a while, consult your Kenwood
dealer.
• CDs with coloring on the recording surface or CDs
that are dirty cannot be used.
• This unit can only play the CDs with
.
This unit may not correctly play discs which do not
have the mark.
• You cannot play a CD-R or CD-RW that has not been
finalized. (For the finalization process refer to your
CD-R/CD-RW writing software, and your CD-R/CDRW recorder instruction manual.)
English |
B64-4317-00_02_E_English.indd 3
3
09.1.6 9:32:31 AM
Basic Operation
[]
[TI]
[]
Release
[AUD]
Microphone
[SEARCH]
Disc slot
[FAVORITE]
General functions
Power/Source Select button: [SRC]
Turns on the power.
When the power is on, the source switches between
Tuner (“TUNER”) , USB or iPod* (“USB” or “iPod”),
CD (“CD”) , Auxiliary input (“AUX”), and Standby
(“STANDBY”) each time this button is pressed.
Press at least 1 second to turn off the power.
[SRC] Auxiliary input
[]
USB Terminal
Faceplate release: Release
Releases the faceplate lock so that it can be removed.
Refer to the following diagram when reattaching the
faceplate.
⁄
• When an optional accessory is connected, the source name
for each device appears.
• When connection of the iPod is recognized, the source
display changes from “USB” to “iPod”.
* Function of KDC-BT6544U/ BT6544UY/ W5544U/W5644U.
Volume control: [AUD] knob
Turn the knob to adjust the volume.
Subwoofer output: [AUD] knob
Switches between ON (“SUBWOOFER ON”) and OFF
(“SUBWOOFER OFF”) each time pushing toward down
for at least 2 seconds.
• You can do this function when “SWPRE” in <Function
Control> (page 6) is set to “SW”.
Auxiliary input
Connect a portable audio device with mini-plug
cable (3.5 ø).
⁄
• Use the mini-plug cable which is stereo type and does not
have any resistance.
• The auxiliary input requires the setting made in “MENU” >
“AUX” of <Function Control> (page 6).
¤
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts.
• Keep the faceplate in its faceplate case while detached.
• Do not place the faceplate (and the faceplate case) in areas
exposed to direct sunlight, excessive heat or humidity. Also
avoid places with too much dust or the possibility of water
splashing.
• To prevent deterioration, do not touch the terminals of the
unit or faceplate with your fingers.
Text/Title scroll: [AUD] knob
Scrolls the CD, audio file, and Radio text display when
pushing toward up for at least 2 seconds.
Muting volume upon reception of phone call
(Function of KDC-W5544U/ W5644U)
When there is a call, “CALL” is displayed and the audio
system is paused.
When the call ends, “CALL” disappears and the audio
system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
⁄
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting Wires to Terminals> (page
40).
4 |
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 4
09.1.6 9:32:32 AM
Function Control : [SEARCH]
Press this button for 1 second allows you to set
various functions using the [AUD] knob. Refer to
<Function Control> (page 6).
Category
Function of setup item
AUTO MEMORY
Putting stations with good reception in the memory
automatically.
iPodCTRL*
Allows you to set up iPod Control by Hand Mode.
PLAY MODE
Allows you to set up the play mode.
DSP*
Allows you to set up the sound environment.
MENU
Allows you to set up the environment.
RETURN
Exit Function Control mode.
Disc & Audio file play functions
* Function of KDC-BT6544U/ BT6544UY/ W5544U/ W5644U.
* Function of KDC-BT6544U/ BT6544UY.
USB device/iPod play: USB Terminal
(Function of KDC-BT6544U/ BT6544UY/ W5544U/ W5644U)
Connecting a USB device starts playback.
Favorite Control : [FAVORITE]
Registers to or retrieves from the memory the
operation procedure to select your favorite broadcast
station or iPod Playlists/ Artists, etc regardless of the
selected source. Refer to <Favorite Control>(page 26).
Tuner functions
FM band: [AUD] knob
Switches between FM1, FM2, and FM3 each time
pushing toward up.
AM band: [AUD] knob
Switches to AM when pushing toward down.
Tuning: [AUD] knob
Changes the frequency when pushing toward left or
right.
⁄
• Use the “MENU” > “SEEK” of <Function Control> (page 6) to
change the frequency switching.
• During reception of stereo stations the “ST” indicator is ON.
Traffic information : [TI]
• For KDC-BT6544U/ BT6544UY/ BT6044/BT6144: Turns
ON or OFF the Traffic Information function when
pressing for at least 2 seconds.
• For KDC-W5544U/W5644U: Turns ON or OFF the
Traffic Information function when pressing.
When the function is turned ON, “TI” indicator is ON.
If traffic bulletin starts when the function is ON,
“TRAFFIC” is displayed and traffic information is
received.
⁄
• If the volume is adjusted during reception of traffic
information, the adjusted volume is memorized
automatically. The memorized volume will be applied next
time the Traffic Information function is turned ON.
Disc play: Disc slot
Starts playing when a disc is inserted.
When a CD is inserted, the “IN” indicator is ON.
⁄
• 3 inch (8 cm) CD cannot be used. Attempt to insert using
an adapter can cause malfunction.
Disc ejection: [0]
⁄
• You can eject the disc for 10 minutes after switching off the
engine.
⁄
• For the playable audio file, media, and devices, refer to
<About Audio file> (page 35).
Pause and play: [38]
Switches between pause and play each time this
button is pressed.
USB device removing: [0]
Press this button for 2 seconds or longer to select the
remove mode, and the remove the USB device.
During the remove mode, “USB REMOVE” is displayed.
Music search: [AUD] knob
Changes the music when pushing toward left or right.
Fast reverses or forwards the music while keeping
pushing toward left or right. (No sound is output
while playing audio file.)
Folder search: [AUD] knob
Changes the folder containing the audio file when
pushing toward up or down.
• For the operation on iPod, enter <Music Search for iPod>
(page 11) is first to enter the search mode.
Search mode: [SEARCH]
After pressing [SEARCH] button, you can quickly
search songs with the [AUD] knob. See <Music
Search> (page 11) for details.
Hands-free phoning
Microphone:
(Function of KDC-BT6544U/ BT6544UY/ BT6044/BT6144)
The microphone for the hands free phone is built in.
When your voice cannot be recognized due to the
low microphone volume or noises in the vehicle,
adjust the microphone settings by selecting “MENU”
>“MIC GAIN” of <Function Control> and “MENU” >“NR
LEVEL” of <Function Control> (page6).
English |
B64-4317-00_02_E_English.indd 5
5
09.1.6 9:32:33 AM
Function Control
Functions in the table below can be set up by using Function Control.
Category Item
AUTO
“AUTO MEMORY”
MEMORY
iPodCTRL “iPodCTRL”
Setting
“FILE SCN”
“ON”/ “OFF”*
“FOLD RDM”
“ON”/ “OFF”*
“ALL RDM”
“ON”/ “OFF”*
“FILE REP”
“ON”/ “OFF”*
When set to “ON”, plays the music repeatedly.
—
“FOLD REP”
“ON”/ “OFF”*
—
“TRAC SCN”
“ON”/ “OFF”*
“DISC RDM”
“ON”/ “OFF”*
When set to “ON”, plays the music in the folder
repeatedly.
When set to “ON”, plays the intro of the music on the
disc successively.
When set to “ON”, plays the music on the disc randomly.
“MGZN RDM”
“ON”/ “OFF”*
—
“TRAC REP”
“ON”/ “OFF”*
When set to “ON”, plays the music in the disc changer
randomly.
When set to “ON”, plays the music repeatedly.
When set to “ON”, plays the music on the disc
repeatedly.
Sets the sound quality.
—
“BASS BOOST” “OFF”/
“STEP1”*/ “2”
“HIGHWAY“OFF”/
SND”
“STEP1”/, “2”/
“3”*
“SUPREME” “ON”/ “OFF”*
Sets the Bass Boost level in two steps.
—
Compensates the low volume or bass sound being lost
by road noises to make vocal sound clearer.
*
Turns ON/OFF the Supreme plus function.
*
“POSITION”
Compensates the sound environment in accordance
with the listening position.
Selects the car type to compensate the distance
difference between each speaker.
Sets the connected speaker, speaker size, and
installation position.
Makes fine adjustment of the compensation value
specified at Cabin.
Makes fine adjustment of the X’Over value specified at
Speaker.
Registering the value setup by Sound Control.Recalling
the sound setup registered by <Audio Preset Memory>.
Registering the value setup by Sound Control.
24
Setting “BYPASS” passes the DSP function.
Setting “THROUGH” activates the DSP function.
—
“ON”/ “OFF”*
“ON”/ “OFF”*
“CONTROL” “EQ”
“SETUP”
“CABIN”
“SPEAKER”
“DTA”
“X’OVER”
“PRESET” “RECALL”
“MEMORY”
“ DSP BYPASS”/
“DSP THROUGH”*
6 |
Condition Page
14
When set to “ON”, allows you to operate iPod with the
control on the iPod.
When set to “ON”, plays the intro of the music in the
folder successively.
When set to “ON”, plays the music in the folder
randomly.
When set to “ON”, all songs in iPod are played at random.
“DISC REP”
DSP*
Setting overview
Memorizes 6 stations with good reception automatically.
* 
PLAY
MODE*
Entry
“COMPACT”
etc.
12
—
—
12
—
—
—
24
23
23
23
24
25
25
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 6
09.1.6 9:32:33 AM
*Factory setting
* Function of KDC-BT6544U/ BT6544UY.
* Function of KDC-BT6044/ BT6144.
* Function of KDC-W5544U/ W5644U.
* Function of KDC-BT6544UY/ BT6144/ W5644U.
* iPod play mode cannot be set when <iPodCTRL> is set to
“OFF”.
* Refer to <Menu Glossary> (page 36).
Category Item
Setting
Entry
MENU
“SECURITY SET”/ “SECURITY
1 sec.
CLR”
“SKIP SRCH”* 
“0.5%”*/
“1%”/ “5%”/
“10%”
“DVC REGIST”* 
1 sec.
Setting overview
Sets/Resets security code.
Condition Page
19
Sets the ratio of skip performed with <Music Search for
iPod>.
11
Register a Bluetooth device (pairing).
28
Allow registration of a special device that cannot be
“S-DVC SELECT”* 
1 sec. registered normally.
28
“PHONE SEL”* 
1 sec. Select a cell-phone subject to hands-free connection.
29
“SMS DOWNLOAD”* 
1 sec. Download a short message.
32
“SMS INBOX”* 
1 sec. Display the received short message.
31
“VOICE TAG”* 
1 sec. the Phone number category in Phonebook.
“VOICE RECOG”* 
1 sec. Calls by recognizing the registered voice.
“DEVICE DEL”* 
1 sec. Cancel registration of the Bluetooth device.
Registers voice for voice recognition and voice to select
Display the status of the Bluetooth device.
“DVC STATUS”* 
1 sec.
“PIN EDIT”* 
1 sec. using the Bluetooth device.
30,
31
18
30
—
*
Specify the PIN code required when registering this unit
28
*
“AUTO ANS”* 
“OFF”/ “0S” –
“8S”* – “99S”
Answer a call automatically after lapse of the preset time
interval for automatic answer.
“MIC GAIN”* 
“–2” – “0”* –
“+2”
“–2” – “0”* –
“+2”
Adjusts the sensitivity of the built-in microphone for a
telephone call.
Reduces the noises generated by the surrounding
environment without changing the microphone
volume.
“FRONT”*/
“F-R”/ “F-L”
“ON”*/ “OFF”
Specify the voice output speaker.
*
Output a beep from the speaker when a call comes in.
*
“NR LEVEL”* 
“SP SEL”* 
“CALL BEEP”* 
“BT F/W UPDATE”* 
“BEEP”* 
1 sec.
“OFF”/ “ON”*
“CLOCK ADJUST”
1 sec.
“SYNC”
“OFF”/ “ON”*
“DISPLAY”
“OFF”/ “ON”*
“DIMMER”
“IL EFFECT”
“OFF”/
“AUTO”*
“OFF”/ “ON”*
“DOT LINE”
“OFF”/ “ON”*
—
*
—
*
Display the firmware version and update the firmware.
30
Setting the operation check sound (beep sound) ON/
OFF.
Sets the clock.
—
Synchronizing the RDS station time data and this unit’s
clock.
Turns off the display when no operation is performed.
—
20
20
—
Dims the display part in conjunction with the light
switch of the vehicle.
Sets whether the key illumination brightness is changed
in conjunction with the key operation.
Specifies whether to display the red dotted line on the
display.
*
—
—
—
Next page 3
English |
B64-4317-00_02_E_English.indd 7
7
09.1.6 9:32:36 AM
Function Control
Category Item
MENU
“SWPRE”* 
Setting
Entry
“REAR”*/
“SUB-W”
“OFF”/ “ON”*
Condition Page
*
Turns on/off the built-in amplifier.
*
“REAR”*/
“FRONT”
“OFF”/ “ON”*
Specifies the destination of AUX input sound when the
Dual Zone function is turned on.
Turns ON/OFF the Supreme function.
*
“NEWS”
“OFF”*/ “00”
– “90”
*
“LOCAL S”
“OFF”*/ “ON”
“SEEK’”
“AF”
“AUTO1”*/
“AUTO2”/
“MANUAL”
“OFF”/ “ON”*
Turns ON/OFF the News Bulletin Automatic Reception
function and sets the news bulletin interrupt disabled
time.
Only stations whose reception is good are searched in
auto seek tuning.
Selects the tuning mode of the radio.
“REGIONAL”
“OFF”/ “ON”*
“ATPS”
“OFF”/ “ON”*
“MONO”
“OFF”/ “ON”*
“AMP”* 
“ZONE2”
“SUPREME”* 
“NAME SET”
1 sec.
“OFF”/ “ON”*
Selects Russian as the display language.
“SCROLL”
“AUTO”/
“MANUAL”*
When set to “AUTO”, scrolls the screen once with the
change of the displayed text.
“AUX”
“POWER OFF”
“CD READ”
1 sec.
“OFF”/
“ON1”*/
“ON2”
“-----”/
“20M”*/
“40M”/ “60M”
“1”*/ “2”
“AUDIO PRESET”* 
“DEMO MODE”
*
—
5, *
When station reception is poor, automatically switches
to the station that is broadcasting the same program
over the same RDS network.
Sets whether to switch to the station only in the specific
region using the “AF” control.
When traffic information station reception is poor,
automatically searches for a station that can be received
better.
You can reduce the noise when stereo broadcasts are
received as monaural.
Sets the display when switched to AUX source.
“RUSSIAN”*
“FAV DELETE”
8 |
Setting overview
Sets the preout output.
*
—
—
—
10
*
—
Deletes Favorite Preset Memory.
26
Sets whether to display AUX during source selection.
*
Turns off the power when the preset time has lapsed in
the Standby mode.
*
Sets the CD read mode.
*
Presets the setting value of the audio control. The preset
22
1 sec. value is retained after resetting.
“OFF”/ “ON”*
4
2 sec. Specifies whether to enable demonstration.
—
20
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 8
09.1.6 9:32:38 AM
*Factory setting
* Function of KDC-BT6544U/ BT6544UY.
* Function of KDC-BT6044/ BT6144.
* Function of KDC-W5544U/ W5644U.
* Function of KDC-BT6544UY/ BT6144/ W5644U.
* iPod play mode cannot be set when <iPodCTRL> is set to
“OFF”.
* Refer to <Menu Glossary> (page 36).
Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB/iPod.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set while CD/ Disc changer source.
: Can be set while Disc changer source.
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
: Can be set only during playback of the iPod source.
(USB source used when the iPod is connected)
: Can be set for sources other than the standby
source by setting “2 ZONE” of <Audio Setup> (page
21) to “ON”.
: Can be set while a cell-phone is connected.
: Refer to the reference page.
— : Can be set during all sources.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Only the items available to the current source are
displayed.
1 Enter Function Control mode
Press the [SEARCH] button for at least 1 second.
”FUNCTION” is displayed.
2 Select your desired setup item
Operation type
Movement between items
Selection of item
Return to previous item
Operation
Turn the [AUD] knob.
Press the [AUD] knob.
Press the [SEARCH] button.
Repeat selection and determination until your
desired setup item is selected.
Example:
MENU
DOT LINE
In this manual, the above selection is
indicated as
Select “MENU” > “DOT LINE”.
3 Make a setting
Press the [AUD] knob or turn the [AUD] knob to
select a setting value, and then press the [AUD]
knob.
• The value of items with
mark can be set by
press the [AUD] knob.
• The value of items with
mark can be set by
pushing the [AUD] knob towards right or left.
• Some items require you to keep pressing the
[AUD] knob for 1 or 2 seconds so that you can
make a setting. For these items, the time during
which you need to keep pressing the [AUD] knob
is displayed in the Entry column in seconds.
• For the functions accompanied by the
description of the setting procedure and so forth,
the reference page numbers are displayed.
4 Exit Function Control mode
Press the [SEARCH] button for at least 1 second.
English |
B64-4317-00_02_E_English.indd 9
9
09.1.6 9:32:41 AM
Display Settings
Text Display Selection
Changes displayed information on each source
following;
In Tuner source
Information
Program Service name or Frequency
Radio text, Program Service name or Frequency
Clock
Display
“FREQUENCY/PS”
“RADIO TEXT”
“CLOCK”
In CD & External disc source
Information
Disc title
Track title
Play time & Track number
Clock
Display
“DISC TITLE”
“TRACK TITLE”
“P-TIME”
“CLOCK”
In Audio file/ iPod source
Information
Music title & Artist name
Album name & Artist name
Folder name
File name
Play time & Music number
Clock
Display
“TITLE/ARTIST”
“ALBUM/ARTIST”
“FOLDER NAME”
“FILE NAME”
“P-TIME”
“CLOCK”
In Standby/ Auxiliary input source
Information
Display
Source name
“SOURCE NAME”
Clock
“CLOCK”
1 Enter Switching Display mode
Press the [38] button for at least 1 second.
“DISPLAY SEL” is displayed.
2 Select the Display item
Turn the [AUD] knob.
Information
Music title
Folder name
File name
Display
“TITLE***”
“FLD***”
“FILE***”
Auxiliary Input Display Setting
Selects the display when changing to Auxiliary
input source.
1 Select Auxiliary input display setting item
during Menu mode (In AUX mode)
Select the “NAME SET” display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2 Enter Auxiliary input display setting mode
Press the [AUD] knob for at least 1 second.
The presently selected Auxiliary input display is
displayed.
3 Select the Auxiliary input display
Turn the [AUD] knob.
“AUX”/ “DVD”/ “PORTABLE”/ “GAME”/ “VIDEO”/ “TV”
4 Exit Auxiliary input display setting mode
Press the [SEARCH] button.
⁄
• When operation stops for 10 seconds, the name at that
time is registered, and the Auxiliary input display setting
mode closes.
• The Auxiliary input display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S220A is used. On the KCA-S220A, “AUX EXT” is
displayed by default.
3 Exit Switching Display mode
Press the [38] button.
⁄
• When you select the clock display, the display setting of
each source will be changed to the clock display.
• If the selected display item does not have any
information, alternative information is displayed.
• When selecting “FOLDER NAME” while playing with
iPod, names will be displayed depending on currently
selected browsing items.
• If the iPod Control by Hand Mode is set to on while
playing the iPod, “iPod BY HAND” is displayed.
• If all characters cannot be displayed while playing with
iPod, the file number in the list is displayed.
10 |
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 10
09.1.6 9:32:43 AM
Music disc/Audio file Operation
Function of Audio file/ Internal CD source
Function of iPod
Music Search
Music Search for iPod
Selecting the music you want to listen to from the
device or media being played now.
Search for the song (in iPod) you want to play.
1 Enter Music Search mode
Press the [SEARCH] button.
“SEARCH” is displayed.
Displays the current Audio file name.
2 Search for music
Audio file
Operation type
Movement between
folders/files
Selection of folder/flie
Return to previous folder
Return to root folder
Operation
Turn the [AUD] knob or push it towards
up or down.
Press the [AUD] knob or push it towards
right.
Push the [AUD] knob towards left.
Push the [AUD] knob towards left for at
least 1 second.
“<” or “>” beside the displayed folder name
indicates that this folder is preceded or followed by
another folder.
When file name is displayed, “ ” is added at the
end.
Internal CD source
Operation type
Operation
Movement between track Turn the [AUD] knob or push it towards
up or down.
Selection of track
Press the [AUD] knob.
Return to first track
Push the [AUD] knob towards left for at
least 1 second.
Cancelling the Music Search mode
Press the [SEARCH] button.
⁄
• Music Search cannot be performed during Random play
or scan play.
1 Enter Music Search mode
Press the [SEARCH] button.
“SEARCH” is displayed.
2 Search for music
Operation type
Movement between items
Skip Search *1
Selection of item
Return to previous item
Return to Top menu
Search by initial
Operation
Turn the [AUD] knob.
Push the [AUD] knob towards right or left.
Press the [AUD] knob.
Push the [AUD] knob towards up.
Push the [AUD] knob towards up for at
least 1 second.
Press the [SEARCH] button for at least 1
second.
The position of the currently displayed item is
indicated by the icon bar in 13 steps.
Cancelling the Music Search mode
Press the [SEARCH] button.
Searching for Music by Initial
You can select an alphabetic character from the list
in the browse item (artist, album, etc.) selected now.
1 Enter alphabet search mode
Press the [SEARCH] button for at least 1 second.
“A B C …” is displayed.
• If you can not search for a song by an alphabetic
character in the browse item selected now, the data on
the screen does not change.
2 Select the initial to be searched for
Operation type
Move to the next character.
Move to the next row.
Cancelling the alphabet
search mode
Operation
Turn the [AUD] knob or push it towards
right or left.
Push the [AUD] knob towards up or
down.
Press the [SEARCH] button.
3 Determine the selected initial.
Press the [AUD] knob.
Start search. When search is completed, the music
search mode is selected again at the selected
character position.
Cancelling the Searching for Music by Initial
Press the [SEARCH] button for at least 1 second.
Next page 3
English | 11
B64-4317-00_02_E_English.indd 11
09.1.6 9:32:43 AM
Music disc/Audio file Operation
⁄
Function of iPod
1
• * Skip Search: The number of songs to be skipped is
determined by the ratio of the total number of songs
in the list which is selected now. Set the ratio with
“SKIP SRCH” in <Function Control> (page 6). Keep
pushing [AUD] knob for 3 seconds or longer skips
songs at 10% irrespective of the setting.
• The time of search by alphabet may become long
depending on the number of songs in iPod or the folder
structure.
• When selecting an initial in the alphabet search mode,
entering “*” searches symbols and entering “1” searches
digits.
• If the first character string begins with an article “a”, “an”,
or “the” in the alphabet search mode, it is searched for in
defiance of the article.
• Characters that are included in a song name but cannot
be displayed are left blank. If no character included in a
song name cannot be displayed, the browse item name
and digits are displayed.
Items
Playlists
Artists
Albums
Search by initial
Display
“PLIST***”
“ART***”
“ALB***”
“PRGM***”
Items
Podcasts
Genres
Composers
Display
“PDCT***”
“GEN***”
“COM***”
iPod Control by Hand Mode
Allows you to operate iPod with the control on the
iPod.
Enter iPod Control by Hand Mode
Select “iPodCTRL”.
For how to select Function Control items, refer to
<Function Control> (page 6).
⁄
• In the iPod Control by hand mode, iPod cannot be
operated using this unit.
• This mode is not compatible with music information
display. The display will show “iPod BY HAND”.
• iPod can be operated when it conforms to the iPod
control function.
Function of remote control
Direct Music Search
Searchs the music by entering the track number.
1 Enter the music number
Function of iPod
All Random
All songs in iPod are played at random.
Enter All random mode
Select “PLAY MODE” > “ALL RDM”.
For how to select Function Control items, refer to
<Function Control> (page 6).
⁄
Press the number buttons on the remote
control.
2 Search the music
Press the [4] or [¢] button.
Cancelling Direct Music Search
Press the [38] button.
⁄
• Direct Music Search cannot be performed during playing
of iPod, Random play, or scan play.
• The time required to turn on the all random function
may become longer depending on the number of songs
in iPod or the folder structure.
• Turning on the all random function changes the iPod
browse item to “SONGS”. This browse item will not
change even if the all random function is turned off.
• If the browse item is changed to search for music while
the all random function is on, the all random function is
turned off and the songs in the browse item are played
at random.
12 |
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 12
09.1.6 9:32:43 AM
Function of disc changers with remote control
Direct Disc Search
Searchs the disc by entering the disc number.
1 Enter the disc number
Press the number buttons on the remote
control.
2 Search the disc
Press the [FM+] or [AM–] button.
Cancelling Direct Disc Search
Press the [38] button.
⁄
• Direct Disc Search cannot be performed during playing
of Random play or scan play.
• Input “0” to select disc 10.
Basic Operation of Disc Changer
(Optional)
Selecting CD changer source
Press the [SRC] button.
Select the “CD CH” display.
Music search
Push the [AUD] knob towards right or left.
Disc Search
Push the [AUD] knob towards up or down.
English |
B64-4317-00_02_E_English.indd 13
13
09.1.6 9:32:43 AM
Tuner Operation
Auto Memory Entry
2 Select the Program Type
Putting stations with good reception in the memory
automatically.
Turn the [AUD] knob or push it towards up or
down.
3 Search for the selected Program Type station
1 Enter Auto Memory Entry mode
Select “AUTO MEMORY”.
For how to select Function Control items, refer to
<Function Control> (page 6).
2 Open Auto Memory Entry
Turn the [AUD] knob to select “YES”, and then
press the [AUD] knob.
When 6 stations that can be received are put in the
memory, auto memory entry closes.
Push the [AUD] knob towards right or left.
4 Exit PTY mode
Press the [AUD] button.
⁄
• This function cannot be used during a traffic bulletin or
AM reception.
• When the selected Program Type is not found, “NO PTY”
is displayed. Select another Program Type.
⁄
• When “AF” in <Function Control> (page 6) is ON, only
RDS stations are put in the memory.
Program Type preset
Putting the Program Type in the preset memory and
quick recall.
PTY (Program Type)
Presetting the Program Type
Selecting the Program Type below and searching
for a station;
1 Select the Program Type to preset
Program Type
Speech
Music
News
Current Affairs
Information
Sport
Education
Drama
Culture
Science
Varied
Pop Music
Rock Music
Easy Listening
Music
Light Classical
Display
“SPEECH”
“MUSIC”
“NEWS”
“AFFAIRS”
“INFO”
“SPORT”
“EDUCATE”
“DRAMA”
“CULTURE”
“SCIENCE”
“VARIED”
“POP M”
“ROCK M”
“EASY M”
“LIGHT M”
Program Type
Serious Classical
Other Music
Weather
Finance
Children’s programs
Social Affairs
Religion
Phone In
Travel
Leisure
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
Display
“CLASSICS”
“OTHER M”
“WEATHER”
“FINANCE”
“CHILDREN”
“SOCIAL”
“RELIGION”
“PHONE IN”
“TRAVEL”
“LEISURE”
“JAZZ”
“COUNTRY”
“NATION M”
“OLDIES”
“FOLK M”
“DOCUMENT”
• Speech and Music include the Program type shown
below.
Music: Black character item.
Speech: White character item.
1 Enter PTY mode
Press the [SEARCH] button.
Turn the [AUD] knob to select “PTY SEARCH”,
and then press the [AUD] knob.
Refer to <PTY (Program Type)> (page14).
2 Enter Program Type preset mode
Press the [SEARCH] button.
3 Select the number you want to put in the
memory
Turn the [AUD] knob or push it towards up or
down.
4 Preset the Program Type
Press the [AUD] knob for at least 2 seconds.
5 Exit Program Type preset mode
Press the [SEARCH] button.
Recalling the preset Program Type
1 Enter PTY mode
Refer to <PTY (Program Type)> (page 14).
2 Enter Program Type preset mode
Press the [SEARCH] button.
3 Select the number you want to recall from the
memory
Turn the [AUD] knob or push it towards up or
down.
4 Recall the Program Type
Press the [AUD] knob.
5 Exit Program Type preset mode
14 |
Press the [SEARCH] button.
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 14
09.1.6 9:32:43 AM
Changing Language for PTY Function
Selecting the Program Type display language as
follows;
Language
English
French
German
Display
“ENGLISH”
“FRENCH”
“GERMAN”
1 Enter PTY mode
Refer to <PTY (Program Type)> (page 14).
2 Enter Changing Language mode
Press the [38] button.
3 Select the language
Turn the [AUD] knob or push it towards up or
down.
4 Exit Changing Language mode
Press the [38] button.
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
“– – – –” is displayed.
2 Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency
92.1 MHz (FM)
810 kHz (AM)
Press button
[0], [9], [2], [1]
[0], [8], [1], [0]
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
⁄
Preset Tuning
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
Recalling the stations in the memory.
1 Enter Preset Tuning Select mode
Press the [SEARCH] button.
2 Select a desired station in the memory
Turn the [AUD] knob or push it towards up or
down.
3 Recall the station
Press the [AUD] knob.
Cancelling Preset Tuning
Press the [SEARCH] button.
English |
B64-4317-00_02_E_English.indd 15
15
09.1.6 9:32:44 AM
Function of KDC-BT6544U/BT6544UY/BT6044/BT6144
Operation of hands-free phoning
Before Use
• For details on the Bluetooth cell-phone with the
hands-free function, see <About the Cell-Phone>
(page 35).
• You need to register your cell-phone before using
it with this unit. For more details, see <Registering
Bluetooth device> (page 28).
• If you have registered two or more cell-phones,
you need to select one of them. For more details,
see <Selecting the Bluetooth device You Wish to
Connect> (page 29).
• To use the Phone Book, it must be downloaded to
this unit in advance. For details, see <Downloading
the Phone Book> (page 29).
• “BT” indicator is lit when a cell-phone is connected
to this unit.
the hands-free talk mode by operating this unit. Operate
your cell-phone to return to the hands-free talk mode.
Adjusting the Voice Volume during a Call
Turn the [AUD] knob.
Call waiting
Answering Another Incoming Call with the
Current Call Suspended
1 Press the [AUD] knob.
2 Turn the [AUD] knob or push it towards up or
down. Select the “ANSWER” display.
3 Press the [AUD] knob.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button or press the [ ] button
for at least 1 second.
Receiving a call
Answering a Phone Call
Press the [AUD] button.
Continuing the Current Call
⁄
1 Press the [AUD] knob.
2 Turn the [AUD] knob or push it towards up or
• The following operations disconnect the line:
- Insert a CD.
- Connect a USB device.
• The name of the calling party is displayed if it has already
been registered in the Phone Book.
3 Press the [AUD] knob.
Rejecting an Incoming Call
Press the [SRC] button or press the [
for at least 1 second.
] button
] button
Switching to the Private Mode
Press the [38] button.
Switches between Private talk (“PRIVATE TALK”)
and Hands-free talk (“HANDS FREE”) each time this
button is pressed.
⁄
• Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection.
If this happens, the source cannot be switched back to
16 |
Answering the Waiting Call after Terminating
the Current Call
Press the [SRC] button or press the [ ] button
for at least 1 second.
Switching between the Current Call and Waiting
Call
Press the [AUD] knob.
Each pressing of this knob switches the calling
party.
During a call
Disconnecting a Call
Press the [SRC] button or press the [
for at least 1 second.
down. Select the “REJECT” display.
Other functions
Clearing the Disconnection Message
Press the [ ] button.
“HF DISCONCT” disappears.
Switching between Display Modes
Press the [38] button for at least 1 second.
Pressing this button each time switches between
name and telephone number.
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 16
09.1.6 9:32:44 AM
Making a call
1 Enter dialing method mode
Press the [
] button.
2 Select a dialing method
Press the [AUD] knob.
“NUMBER DIAL” » “PHONE BOOK1” » “PHONE BOOK2”
» “OUT-CALL” » “IN-CALL” » “MISSED CALLS”
Methods of operations in the above modes are
described below.
3 Exit the dialing method mode
Press the [
4 Select the number you want to recall from the
memory
Turn the [AUD] knob or push it towards up or
down.
5 Press the [AUD] knob.
Phone number is displayed.
6 Make a call
Press the [AUD] knob for at least 1 second.
⁄
• You need to register the preset dial number. (page 18)
] button.
Calling a number in the Phone Book
Dial a number
1 Enter dialing method mode
Press the [
] button.
2 Select the number dial mode
Press the [AUD] knob.
Select the “NUMBER DIAL” display.
3 Enter a phone number
Press the number ([1] – [0]), #([FM]), *([AM]), or
+([¢]) button on the remote controller.
4 Make a call
Press the [DIRECT] button on the remote
controller.
To erase the entered phone number digit by
digit:
Press the [4] button on the remote controller.
⁄
Press the [
] button.
2 Select the Phone Book mode
Press the [AUD] knob.
Select the “PHONE BOOK1” display, proceed to step
3.
Select the “PHONE BOOK2” display, proceed to step
4.
3 Select the initial to be searched for
Operation type
Move to the next character.
Operation
Turn the [AUD] knob or push it towards
right or left.
Move to the next row.
Push the [AUD] knob towards up or
down.
Determine the selected initial. Press the [AUD] knob for at least 1
second.
4 Select the name
• You can input max 32 digits.
Speed dialing (Preset dial)
1 Enter dialing method mode
Press the [
1 Enter dialing method mode
] button.
2 Press the [AUD] knob.
Select the “NUMBER DIAL” display.
Operation type
Move to the next phone
number.
Move to the next name.
Operation
Turn the [AUD] knob or push it towards
up or down.
Push the [AUD] knob towards right
or left.
5 Make a call
Press the [AUD] knob for at least 1 second.
⁄
• During search, a non-accent character such as “u” is
searched for instead of an accent character such as “ü”.
3 Enter preset dial mode
Press the [SEARCH] button.
English |
B64-4317-00_02_E_English.indd 17
17
09.1.6 9:32:44 AM
Function of KDC-BT6544U/BT6544UY/BT6044/BT6144
Operation of hands-free phoning
Calling a number in the call log
1 Enter dialing method mode
Press the [
] button.
2 Select the call log mode
Press the [AUD] knob.
Select the “OUT-CALL” (outgoing call), “IN-CALL”
(incoming call), or “MISSED CALLS” (missed call)
display.
3 Select a name or phone number
Turn the [AUD] knob or push it towards up or
down.
4 Make a call
Press the [AUD] knob for at least 1 second.
⁄
Registering to the Preset Dial Number
List
1 Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2 Enter Preset Memory mode
Press the [SEARCH] button.
3 Select the number to put in the memory
Turn the [AUD] knob or push it towards up or
down.
4 Determine the number to put in the memory
Press the [AUD] knob for at least 1 second.
• The outgoing call list and the incoming call list, and the
missed call list are the lists of calls originated from and
received at this unit. They are not the ones stored in the
cell-phone memory.
Exit the Preset Memory mode
Press the [SEARCH] button.
Make a voice dialing call
Display of phone number type
(category)
1 Enter voice recognize mode
The category items in the Phone Book are displayed
as follows:
Select “MENU” > “VOICE RECOG”.
For how to select Function Control item, refer to
<Function Control> (page 6).
“V-RECOG READY” is displayed.
2 Press the [AUD] knob.
“PB NAME” is displayed.
When a beep is heard, utter the name within 1
second.
Display
“GENERAL”
“HOME”
“OFFICE”
“MOBILE”
“OTHER”
Information
General
Home
Office
Mobile
Other
3 “PN TYPE” is displayed.
When a beep is heard, utter the category within 1
second.
4 Make a call
Press the [AUD] knob for at least 1 second.
• This step is the same as step 3 of the procedure in
<Calling a number in the Phone Book>. You can make a
call or select a category.
⁄
• If your voice cannot be recognized, a message is
displayed. Pressing the [AUD] knob allows you to retry
voice input. (page 43)
• Both the name and category requires registration of a
voice tag. (page 30)
• Audio sound is not output during voice recognize.
18 |
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 18
09.1.6 9:32:44 AM
Other Functions
Activating Security Code
Deactivating Security Code
⁄
To deactivate the Security Code function.
• You can set the Security Code with a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced. Make
a note of the Security Code and treasure it up.
1 Select Security Code item during Menu
1 Select Security Code item during Menu
mode (In Standby mode)
“SECURITY SET” is displayed.
For how to select Function Control items, refer to
<Function Control> (page 6).
2 Enter Security Code mode
Press the [AUD] knob for at least 1 second.
When “ENTER” is displayed, “CODE” is also displayed.
3 Enter Security Code
Operation type
Select the digits to enter
Select the Security Code
numbers
Operation
Push the [AUD] knob towards right
or left.
Turn the [AUD] knob or push it
towards up or down.
4 Confirm the Security Code
Press the [AUD] knob for at least 3 seconds.
When “RE-ENTER” is displayed, “CODE” is also
displayed.
5 Do the step 3 through 4 operation, and reenter
mode (In Standby mode)
Select the “SECURITY CLR” display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2 Enter Security Code mode
Press the [AUD] knob for at least 1 second.
When “ENTER” is displayed, “CODE” is also displayed.
3 Enter Security Code
Operation type
Select the digits to enter
Select the Security Code
numbers
Operation
Push the [AUD] knob towards right
or left.
Turn the [AUD] knob or push it
towards up or down.
4 Press the [AUD] knob for at least 3 seconds.
“CLEAR” is displayed.
The Security Code function deactivates.
5 Exit Security Code mode
Press the [SEARCH] button.
⁄
• If a wrong security code is entered, “ERROR” is displayed.
Enter a correct security code.
the Security Code.
“APPROVED” is displayed.
The Security Code function activates.
⁄
• If you enter the wrong Code in steps 3 through 4, repeat
from step 3.
6 Exit Security Code mode
Press the [SEARCH] button.
Entering Security Code
The Security Code is required to use the audio unit
when the unit is first used after removed from the
battery power source or the Reset button is pressed.
1 Turn the power ON.
2 Do the step 3 through 4 operation, and enter
the Security Code.
“APPROVED” is displayed.
Now, you can use the unit.
English |
B64-4317-00_02_E_English.indd 19
19
09.1.6 9:32:44 AM
Other Functions
Audio Adjustments
Manual Clock Adjustment
Audio Control
1 Select Clock Adjustment item during Menu
You can adjust following Audio Control items ;
mode
Select the “CLOCK ADJUST” display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2 Enter Clock adjustment mode
Press the [AUD] knob for at least 1 second.
The clock display blinks.
3 Adjusting Clock
Adjustment item
Hours
Minutes
Operation
Push the [AUD] knob towards up
or down.
Push the [AUD] knob towards right
or left.
4 Exit Clock adjustment mode
Press the [SEARCH] button.
⁄
• You can do this adjustment when “MENU” > “SYNC” in
<Function Control> (page 6) is set to “OFF”.
Adjustment Item
Rear volume
Subwoofer level
Bass Boost*
Display
“R-VOLUME”
“SUB-W L”
“B.BOOST”
Range
0 — 35
–15 — +15
“STEP1”/”STEP2”/“OFF”
(The indicator turns on
according to the setting.)
System Q*
“NATURAL”/“USER”/ Natural/User setting/Rock/
“ROCK”/“POPS”/“EA Pops/Easy/Top 40/Jazz/
SY”/“TOP40”/“JAZZ” Game
/”GAME”
Bass level*
“BASS L”
–8 — +8
Middle level*
“MID L”
–8 — +8
Treble level*
“TRE L”
–8 — +8
Balance
“BALANCE”
Left 15 — Right 15
Fader
“FADER”
Rear 15 — Front 15
Exit Audio Control mode (Volume control mode)
*Function of KDC-BT6044/BT6144/W5544U/W5644U.
⁄
• Source tone memory: You can set Bass, Middle, and
Treble for each source.
• “USER”: The ranges selected lastly for Bass level, Middle
level, and Treble level are recalled automatically.
1 Select the source to adjust
Demonstration mode setting
Turning the demonstration mode ON/OFF.
1 Select Demonstration item during Menu mode
Select the “DEMO MODE” display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2 Set the Demonstration mode
Press the [AUD] knob for at least 2 seconds.
Pressing this button for 2 seconds or longer toggles
the setting between “ON” and “OFF”.
20 |
Press the [SRC] button.
2 Enter Audio Control mode
Press the [AUD] knob.
3 Select the Audio item to adjust
Press the [AUD] knob.
4 Adjust the Audio item
Turn the [AUD] knob.
5 Exit Audio Control mode
Press any button.
Press a button other than the [AUD] knob or [0]
button.
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 20
09.1.6 9:32:45 AM
Function of KDC-BT6044/BT6144/W5544U/W5644U
Audio Setup
Adjusting the detail of Audio Control
You can set Sound system , such as follows;
You can adjust the following Basic Audio Items in
datail: Bass level, Middle level, and Treble leval.
Bass level
Adjustment Item
Bass Center Frequency
Display
“BASS F”
Bass Q Factor
Bass Extend
“BASS Q”
“BASS EXT”
Range
40/50/60/70/80/100/
120/150 Hz
1.00/1.25/1.50/2.00
OFF/ON
Middle level
Rear High Pass Filter* “HPF R”
Low Pass Filter*
“LPF SW”
Subwoofer Phase*
Volume offset
Dual Zone System
“SW PHASE”
“V-OFFSET”
“2ZONE”
Range
Through/40/60/80/100/120/
150/180/220 Hz
Through/40/60/80/100/120/
150/180/220 Hz
50/60/80/100/120/ Through
Hz
Reverse (180°)/ Normal (0°)
–8 — ±0 (AUX: -8— +8)
OFF/ON
*Function of KDC-BT6044/BT6144/W5544U/W5644U.
Adjustment Item
Display
Middle Center Frequency “MID F”
Middle Q Factor
“MID Q”
Range
0.5/1.0/1.5/2.0 kHz
1.0/2.0
Treble level
Adjustment Item
Treble Center Frequency
Adjustment Item Display
Front High Pass Filter* “HPF” F
Display
“TRE F”
Range
10.0/12.5/15.0/17.5 kHz
1 Select the Basic Audio item
For how to select Basic Audio items, see <Audio
Control> (page 20).
2 Enter Detail adjustment mode of Audio
Control
Press the [AUD] knob for at least 1 second.
3 Select the Detail Audio item to adjust
Press the [AUD] knob.
4 Adjust the Detail Audio item
Turn the [AUD] knob.
5 Exit the Detail Audio Control mode
Press the [AUD] knob for at least 1 second.
⁄
• When you set the Bass Extend to ON, low frequency
response is extended by 20%.
• You can exit the Audio Control mode at anytime by
pressing any button except for [AUD] knob or [0]
button.
⁄
• Volume offset: Sets each source’s volume as a difference
from the basic volume.
• Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by “ZONE2” of
<Function Control> (page 6).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by [AUD] knob.
- Adjust the volume of Rear channel by <Audio Control>
(page 20) or [5]/[∞] button on the remote control
(page 33).
- The Audio Control has no effect on sub source.
1 Select the source to adjust
Press the [SRC] button.
2 Enter Audio Setup mode
Press the [AUD] knob for at least 1 second.
3 Select the Audio Setup item to adjust
Press the [AUD] knob.
4 Adjust the Audio setup item
Turn the [AUD] knob.
5 Exit Audio Setup mode
Press the [AUD] knob for at least 1 second.
English |
B64-4317-00_02_E_English.indd 21
21
09.1.6 9:32:45 AM
Audio Adjustments
Function of KDC-BT6044/BT6144/W5544U/W5644U
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type as follows;
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
Display
“SP SEL OFF”
“SP SEL 5/4”
“SP SEL 6x9/6”
“SP SEL OEM”
1 Enter Standby
Press the [SRC] button.
Select the “STANDBY” display.
5 Put the Audio Preset in the memory
Turn the [AUD] knob to select “YES”, and then
press the [AUD] knob.
“COMPLETE” is displayed.
6 Exit Audio Preset mode
Press the [SERACH] button twice.
⁄
• Register 1 pair of Audio Preset Memory. You cannot
register by the source.
• When you press the Reset, all the sources will be the
setting value which is registered.
• The following items cannot be registered.
Volume, Balance, Fader, Volume offset, Dual Zone System,
Rear Volume
2 Enter Speaker Setting mode
Press the [AUD] knob.
3 Select the Speaker type
Turn the [AUD] knob.
4 Exit Speaker Setting mode
Press the [AUD] knob.
Function of KDC-BT6044/BT6144/W5544U/W5644U
Audio Preset Recall
Recalling the sound setup registered by <Audio
Preset Memory> (page 22).
1 Select the source
2 Enter Audio Preset Recall mode (Other than
Function of KDC-BT6044/BT6144/W5544U/W5644U
Audio Preset Memory
Registering the value setup by Sound Control. The
memory cannot be erased by the Reset button.
1 Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 20)
- <Audio Setup> (page 21)
2 Enter Audio Preset Memory mode (Other than
Standby mode)
Select “MENU” > “AUDIO PRESET”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control items, refer to
<Function Control> (page 6).
3 Select the Audio Preset Memory
Turn the [AUD] knob.
Select the “MEMORY” display.
4 Determine whether to put the Audio Preset in
the memory
Press the [AUD] knob.
22 |
Standby mode)
Select “MENU” > “AUDIO PRESET”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control items, refer to
<Function Control> (page 6).
3 Select the Audio Preset Recall
Turn the [AUD] knob.
Select the “RECALL” display.
4 Determine whether to recall the Audio Preset
Press the [AUD] knob.
5 Recall the Audio Preset
Turn the [AUD] knob to select “YES”, and then
press the [AUD] knob.
“COMPLETE” is displayed.
6 Exit Audio Preset mode
Press the [SERACH] button twice.
⁄
• The User memory of “SYSTEM Q” in <Audio Control>
(page 20) is changed to the value which was recalled.
• The source tone memory item of <Audio Control> (page
20) is changed to the value which was recalled by the
selected source.
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 22
09.1.6 9:32:45 AM
Function of KDC-BT6544U/BT6544UY
Audio Adjustments (DSP)
Cabin selection
2 Select the item you want to set
You can compensate the delay of the sound arrival
time by selecting your environment from the
following car types;
Car type
Not compensating.
Compact car
Sedan
Station wagon
Minivan
Sport-utility vehicle
Passenger van
Display
“OFF”
“COMPACT”
“SEDAN”
“WAGON”
“MINIVAN”
“SUV”
“PAS-VAN”
1 Enter Cabin select mode
Select “DSP” > “SETUP” > “CABIN”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the car type
Turn the [AUD] knob and push the center when
the desired item is displayed.
3 Exit Cabin select mode
Press the [SEARCH] button.
⁄
• You can compensate the distances in more details by
using <DTA> (page 23) function.
Turn the [AUD] knob and push the center when
the desired item is displayed.
3 Set the value
Turn the [AUD] knob and push the center when
the desired item is displayed.
4 Exit Speaker Setting mode
Press the [SEARCH] button.
DTA (Digital Time Alignment) setting
Adjusting fine tuning of the speaker position
compensation value specified at <Cabin selection>
(page 23).
1 Enter DTA setting mode
Select “DSP” > “SETUP” > “DTA”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the speaker you want to set
Setting speaker
Front speaker
Rear speaker
Subwoofer
Display
“FRONT”
“REAR"
“SUB-W"
Turn the [AUD] knob and push the center when
the desired item is displayed.
Speaker Setting
Setting the speaker to be connected, speaker size,
and installation position;
Setting speaker
Front
Speaker
“FRONT” Location
Speaker
Size
Tweeter
Rear
Speaker
“REAR” Location
Speaker
Size
Subwoofer Speaker
“SUB-W” Size
Display
Range
“LOCATION” “DOOR”/ “ON DASH”/
“UND DASH”
“SIZE”
“SMALL” / “MEDIUM”/ “LARGE”
3 Set the compensation value of the speaker
position
Turn the [AUD] knob and push the center when
the desired value is displayed.
Adjust between 0 and 440 cm.
Refer to <Appendix> (page 36) on how to set the
compensation value.
4 Exit DTA setting mode
“TWEETER” “NONE”/ “USE”
“LOCATION” • “DOOR”/ “R-DECK”
• “2ND ROW”/ “3RD ROW”
(Minivan/ Passenger van)
“SIZE”
“NONE”/ “SMALL” / “MEDIUM”/
“LARGE”
“SIZE”
“NONE”/ “SMALL” / “LARGE”
Press the [SEARCH] button.
1 Enter Speaker Setting mode
Select “DSP” > “SETUP” > “SPEAKER”.
For how to select Function Control item, refer to
<Function Control> (page 6).
English |
B64-4317-00_02_E_English.indd 23
23
09.1.6 9:32:45 AM
Function of KDC-BT6544U/BT6544UY
Audio Adjustments (DSP)
X’Over setting
1 Enter Equalizer Control mode
You can set a X’Over value for the speakers;
Setting speaker
Front
High Pass
“FRONT” Filter
Rear
High Pass
“REAR” Filter
Subwoofer Speaker
“SUB-W” Size
Phase
Display
“FC”/
“HPF F”
“FC”/
“HPF R”
“FC”/
“LPF SW”
“FC”/
“SW PHASE”
Range
THRU (Through) /40 /60 /70 /80
/100 /120 /150 / 180/ 220 Hz
THRU (Through) /40 /60 /70 /80
/100 /120 /150 / 180/ 220 Hz
40/ 60/ 70/ 80/ 100/ 120/150 /
180/ 220/ THRU (Through) Hz
REVERSE (180°)/ NORMAL (0°)
1 Enter X’Over setting mode
Select “DSP” > “SETUP” > “X’OVER”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the item you want to set
Turn the [AUD] knob and push the center when
the desired item is displayed.
Select “DSP” > “CONTROL” > “EQ”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the item you want to set
Turn the [AUD] knob and push the center when
the desired item is displayed.
3 Set the value
Turn the [AUD] knob and push the center when
the desired item is displayed.
iPod Equalizer
1. Enter iPod Equalizer mode
Press the [AUD] button.
2. Set the value
Turn the [AUD] knob and push the center
when the desired item is displayed.
4 Exit Equalizer Control mode
Press the [SEARCH] button.
3 Set the X’Over value
Turn the [AUD] knob and push the center when
the desired value is displayed.
Preset position selection
4 Exit X’Over setting mode
Press the [SEARCH] button.
Equalizer Control
You can adjust following Equalizer Control items.
iPod Equalizer can be set after connecting iPod and
selecting “iPod” in <System Q>. Select from the 22
equalizer types;
Adjustment Item
Display
Preset
System Q “EQ”
memory
“PRESET”
Equalizer
agjust
“MANUAL”/
“BAND”
Center “F0”
Frequency
Quality “Q”
Level
“GAIN”
Range
“NATURAL” (Natural)/ “USER”/
“ROCK” (Rock)/ “POPS” (Pops)/
“EASY” (Easy)/ “TOP40” (Top 40)/
“JAZZ” (Jazz)/ “GAME” (Game)/
“iPod”
Refer to the followings.
0.25/ 0.50/ 1.00/ 2.00
–9/ -7/ -5/ -3/ -2/ -1/ 0/ +1/
+2/ +3/ +5/ +7/ +9
• The frequency which can be selected by each Frequency
band is shown below.
Band
“BAND1”
“BAND2”
“BAND3”
24 |
Frequency
60/ 100/ 160/ 250/ 400 Hz
630/ 1k/ 1.6k/ 2.5k Hz
4/ 6.3/ 10/ 16 kHz
According to the listening position, select the
position from the following settings so that the
normal position of the sound environment can
be compensated in accordance with the selected
position;
Compensation seat
Not compensating.
Front-Left seat
Front-Right seat
Front seat
Range
“ALL”
“F-L”
“F-R”
“F-ALL”
1 Enter Position setting mode
Select “DSP” > “CONTROL” > “POSITION” >
“PRESET”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the seat you want to compensate
Turn the [AUD] knob and push the center when
the desired item is displayed.
3 Exit Position setting mode
Press the [SEARCH] button.
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 24
09.1.6 9:32:45 AM
Audio Preset Memory
Audio Preset Recall
Registering the value setup by Sound Control.
Recalling the sound setup registered by <Audio
Preset Memory> (page 25).
1 Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- Cabin selection (page 23)
- Speaker Setting (page 23)
- DTA (Digital Time Alignment) setting (page 23)
- X’Over setting (page 24)
- Equalizer Control (page 24)
- Preset position selection (page 24)
2 Enter Audio Preset Memory mode (Other than
Standby mode)
Select “DSP” > “PRESET” > “MEMORY”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control items, refer to
<Function Control> (page 6).
3 Select the number to put in the memory
Turn the [AUD] knob to select number, and then
press the [AUD] knob.
4 Put the Audio Preset in the memory
Turn the [AUD] knob to select “YES”, and then
press the [AUD] knob.
“COMPLETE” is displayed.
5 Exit Audio Preset Memory mode
Press the [SEARCH] button.
1 Select the source
Press the [SRC] button.
2 Enter Audio Preset Recall mode (Other than
Standby mode)
Select “DSP” > “PRESET”> “RECALL”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control items, refer to
<Function Control> (page 6).
3 Select the number to recall in the memory
Turn the [AUD] knob to select number, and then
press the [AUD] knob.
4 Recall the Audio Preset
Turn the [AUD] knob to select “YES”, and then
press the [AUD] knob.
“COMPLETE” is displayed.
5 Exit Audio Preset Recall mode
Press the [SEARCH] button.
⁄
• The User memory of “SYSTEM Q” in <Equalizer Control>
(page 24) is changed to the value which was recalled.
• The source tone memory item of <Equalizer Control>
(page 24) is changed to the value which was recalled by
the selected source.
⁄
• Register 6 pairs of Audio Preset Memory.
• “USER 1”: When you press the Reset, all the sources will
be the setting value which is registered.
• “USER 1”, “USER 2”:
The memory cannot be erased by the Reset button.
• This function cannot be registered when the iPod
Equalizer set in <Equalizer Control> (page 24).
English |
B64-4317-00_02_E_English.indd 25
25
09.1.6 9:32:46 AM
Favorite Control
Preset Memory
Preset Recall
Registering the operation procedure to select your
favorite broadcast station or iPod Playlists/ Artists,
etc.
Retrieving an item registered to Favorite.
1 Select a desired source to register and setting
item.
Source
TUNER
iPod
Setting Item
Preset Memory
List selection screen for Playlists/ Artists/
Albums, etc.
Telephone number retrieval.
Hands-free phone
“ ” is displayed when the operation
procedure can be registered.
iPod setting
The desired list in the first hierarchy can be registered.
1st hierarchy
iPod
2nd hierarchy
Press the [FAVORITE] button.
2 Select the number to recall in the memory
Turn the [AUD] knob.
3 Recall the Audio Preset
Press the [AUD] knob.
Cancelling the Preset Recall mode
Press the [FAVORITE] button.
⁄
• When iPod is selected for the source, the list selection
screen for Playlists/ Artists/ Albums, etc. is displayed.
Songs will not be automatically played.
3rd hierarchy
PLAYLISTS
ARTISTS
ALL ARTISTS
ALBUMS
ARTISTS 1
Preset Memory Delete
ARTISTS 2
ALL ALBUMS
ARTISTS 3
ALBUM 1
ALBUM 2
COMPOSERS
ALBUM 3
AUDIOBOOKS
2 Enter Preset Memory mode
Press the [FAVORITE] button for at least 1
second.
3 Select the number to put in the memory
Turn the [AUD] knob.
4 Put the Preset in the memory
Press the [AUD] knob.
Cancelling the Preset Memory mode
Press the [FAVORITE] button.
⁄
• Registering the operation procedure to an existing
preset number overwrites the existing procedure.
• Register 6 pairs of Favorite Preset Memory.
The memory cannot be erased by the Reset button.
• If the items in the second or lower hierarchy are
changed, the list in iPod will be changed by adding or
deleting songs after the FAVORITE registration. Due to
this, the list registered in this unit will be different from
the list in iPod. The FAVORITE registration should be
performed again after editing the items in iPod.
26 |
1 Enter Preset Recall mode
Deleting an item registered to Favorite.
1 Enter Preset Memory Delete mode
Select “MENU” > “FAV DELETE”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the preset number to delete or “ALL” to
delete all preset memory numbers.
Turn the [AUD] knob, and then press the [AUD]
knob.
“DELETE” is displayed.
3 Delete the selected item registered to
Favorite.
Turn the [AUD] knob to select “YES”, and then
press the [AUD] knob.
“COMPLETE” is displayed.
4 Exit Preset Memory Delete mode
Press the [SEARCH] button.
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 26
09.1.6 9:32:46 AM
Name Setting
Giving a name to Preset Memory registered to
Favorite.
1 Enter Preset Recall mode
Press the [FAVORITE] button.
2 Retrieve the Preset Memory to change.
Turn the [AUD] knob.
3 Enter Name set mode
Press the [AUD] knob for at least 1 second.
Select the “NAME SET” display.
4 Enter the name
Operation type
Move the cursor to the enter
character position
Select the characters
Operation
Push the [AUD] knob towards right
or left.
Turn the [AUD] knob or push it
towards up or down.
5 Exit Name Setting mode
Press the [AUD] knob.
Cancelling the Preset Recall mode
Press the [FAVORITE] button.
English |
B64-4317-00_02_E_English.indd 27
27
09.1.6 9:32:46 AM
Function of KDC-BT6544U/BT6544UY/BT6044/BT6144
Bluetooth Setup
Registering Bluetooth device
⁄
To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing). You
can register up to five Bluetooth devices to this unit.
• This unit allows up to eight digits to be input for a PIN
code. If a PIN code cannot be input from this unit, it can
be input from the Bluetooth device.
• If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
• If the error message appears even though the PIN code
is correct, try <Registering Special Bluetooth device>
(page 28).
When registering from Bluetooth devices
1 Turn on the control unit.
2 Start registering a unit by operating the
Bluetooth device
By operating the Bluetooth device, register the
hands-free unit (pairing). Select “KENWOOD BT
CD/R-3P2” from the list of connected units.
3 Enter a PIN code
Input the PIN code registered as mentioned in
<Registering PIN Code> (page 28).
Check that registration is complete on the
Bluetooth device.
4 By operating the Bluetooth device, start handsfree connection.
When registering from this unit
1 Enter Bluetooth device registration mode
Select “MENU” > “DVC REGIST”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
Search for the Bluetooth device.
When search is completed, “FINISHED” is displayed.
2 Select the Bluetooth device
Turn the [AUD] knob or push it towards up or
down to select the Bluetooth device.
Press the [AUD] knob to determine the
selection.
3 Input the PIN code
Operation type
Select the numbers.
Move to the next digit.
Delete the last digit.
Operation
Turn the [AUD] knob or push it towards
up or down.
Push the [AUD] knob towards right.
Push the [AUD] knob towards left.
4 Transmit the PIN code
Press the [AUD] knob for at least 1 second.
If “PAIRING OK” is displayed, registration is
completed.
5 Return to the device list
Press the [AUD] knob.
6 Exit Bluetooth device registration
Registering Special Bluetooth device
Allow registration of a special device that cannot be
registered normally (pairing).
1 Enter special device registration mode
Select “MENU” > “S-DVC SELECT”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
A list is displayed.
2 Select a device name
Turn the [AUD] knob or push it towards up or
down to select a device name.
Press the [AUD] knob to determine the
selection.
If “COMPLETE” is displayed, registration is
completed.
3 Go through the procedure of <Registering
Bluetooth device> (page 28) and complete the
registration (pairing).
Cancelling special device registration mode
Press the [SEARCH] button.
⁄
• If the device name is not in the list, select “OTHER
PHONE”.
Registering PIN Code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1 Enter PIN code edit mode
Select “MENU” > “PIN EDIT”.
Press the [AUD] knob for at least 1 second.
Press the [SEARCH] button.
28 |
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 28
09.1.6 9:32:46 AM
For how to select Function Control item, refer to
<Function Control> (page 6).
The current setting of PIN code is displayed.
2 Input the PIN code
Operation type
Select the numbers.
Move to the next digit.
Delete the last digit.
Operation
Turn the [AUD] knob or push it towards
up or down.
Push the [AUD] knob towards right.
Push the [AUD] knob towards left.
3 Register a PIN code
Press the [AUD] knob for at least 1 second.
If “COMPLETE” is displayed, registration is
completed.
3 By operating the cell-phone, start the handsfree connection.
To clear the downloading completion message
Press any button.
⁄
• Up to 1000 phone numbers can be registered for each
registered cell-phone.
• Up to 32 digits can be registered for each phone number
along with up to 50* characters representing a name.
(* 50: Number of alphabetic alphabetical characters.
Fewer characters can be input depending on the type
of characters.)
• To cancel downloading of the phone book data, operate
the cell-phone.
4 Exit the PIN code edit mode
Press the [SEARCH] button.
⁄
• By default, "0000" is specified.
• A PIN code can be specified with up to eight digits.
Downloading the Phone Book
Download the phone book data from the cellphone to this unit so that you can use the Phone
Book of this unit.
To download automatically
If the cell-phone supports a phone book
synchronization function, the phone book is
downloaded automatically after Bluetooth
connection.
⁄
• Setting on the cell-phone may be required.
• If no phone book data is found in the unit even after
the compete display, your cell-phone may not support
automatic download of phone book data. In this case, try
downloading manually.
To download from the cell-phone manually
1 By operating the cell-phone, end the hands-free
connection.
2 By operating the cell-phone, send the phone
book data to this unit
By operating the cell-phone, download the phone
book data to this unit.
• During downloading:
“DOWNLOADING” is displayed.
• After completion of downloading:
“COMPLETE” is displayed.
Selecting the Bluetooth device You
Wish to Connect
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1 Enter Bluetooth device selection mode
Select “MENU” > “PHONE SEL”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
‘(name)’ is displayed.
2 Select the Bluetooth device
Turn the [AUD] knob or push it towards up or
down.
3 Set up the Bluetooth device
Push the [AUD] knob towards right or left.
'✱(name)' or '-(name)' is displayed.
"✱": The selected Bluetooth device is busy.
"-": The selected Bluetooth device is on standby.
" " (blank): The Bluetooth device is deselected.
4 Exit the Bluetooth device selection mode
Press the [SEARCH] button.
⁄
• If a cell-phone is already selected, deselect it, and then
select a different one.
English |
B64-4317-00_02_E_English.indd 29
29
09.1.6 9:32:46 AM
Function of KDC-BT6544U/BT6544UY/BT6044/BT6144
Bluetooth Setup
Deleting a Registered Bluetooth
device
Adding a voice dialing command
You can delete a registered Bluetooth device.
Add a voice tag to the phonebook for voice dialing.
You can register up to 35 voice tags.
1 Enter Bluetooth device deletion mode
1 Enter voice tag mode
Select “MENU” > “DEVICE DEL”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
‘(name)’ is displayed.
2 Select the Bluetooth device
Turn the [AUD] knob or push it towards up or
down.
3 Delete the selected Bluetooth device
Press the [AUD] knob for at least 1 second.
4 Exit the Bluetooth device deletion mode
Press the [SEARCH] button.
⁄
Select “MENU” > “VOICE TAG”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select “PB NAME EDIT” mode
Press the [AUD] knob to select “PB NAME EDIT”,
and then press the [AUD] knob for at least 1
second.
3 Search for the name to register
Select the name to register with reference to 4 in
<Calling a number in the PhoneBook> (page 17).
If a voice tag has already been registered for a
name, “*” is displayed before the name.
4 Select a mode
• When a registered cell-phone is deleted, its Phone Book,
log, SMS, and voice tag are also deleted.
Displaying the Firmware Version
Display the version of the firmware of this unit.
1 Enter Bluetooth Firmware update mode
Select “MENU” > “BT F/W UPDATE”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
The firmware version appears.
2 Exit Bluetooth Firmware update mode
Press the [SEARCH] button.
⁄
• For how to update the firmware, access our website.
http://www.kenwood.com/bt/information/
Turn the [AUD] knob or push it towards up or
down.
Display
“PB NAME REG”
“PB NAME CHK”*
“PB NAME DEL”*
“RETURN”
Operation
Register a voice tag.
Play a voice tag.
Delete a voice tag.
Return to step 2.
* Displayed only when a name for which a voice tag has
been registered is selected.
Select “PB NAME REG” (Regist)
5 Register a voice tag (first)
Press the [AUD] knob.
“ENTER1” is displayed.
When a beep is heard, utter a voice tag within 2
seconds.
6 Confirm the voice tag (second)
Press the [AUD] knob.
“ENTER2” is displayed.
When a beep is heard, utter the same voice tag as
that you uttered in step 4 within 2 seconds.
“COMPLETE” is displayed.
7 End registration
Press the [AUD] knob.
Return to step 2. You can register another voice tag
continuously.
⁄
30 |
• If your voice cannot be recognized, a message is
displayed. Pressing the [AUD] knob allows you to retry
voice input. (page 43)
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 30
09.1.6 9:32:47 AM
Select “PB NAME CHK” (Play)
5 Press the [AUD] knob.
Play the registered voice and return to step 2.
Select “PB NAME DEL” (Delete)
⁄
• Set the voice tag for all the 5 categories. If the voice tag
is not registered for all the categories, the Phonebook
may not be recalled by voice command.
5 Delete a voice tag
Press the [AUD] knob at least 1 second.
Return to step 2.
Exit the voice tag mode
Press the [SEARCH] button.
⁄
• Audio sound is not output during voice tag registration.
SMS (Short Message Service)
The SMS arrived at the cell-phone is displayed on
the receiver.
A newly arrived message is displayed.
¤
• To prevent car accidents, the driver should not read the
SMS while driving.
Setting a Voice Command for
Category
Add a voice tag to the phone number category
(type) for voice calling.
1 Enter voice tag mode
Select “MENU” > “VOICE TAG”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select “PB TYPE EDIT” mode
Press the [AUD] knob to select “PB TYPE EDIT”,
and then press the [AUD] knob for at least 1
second.
3 Select the category (type) you wish to set
Turn the [AUD] knob or push it towards up or
down.
“GENERAL”/ “HOME”/ “OFFICE”/ “MOBILE”/ “OTHER”
4 Press the [AUD] knob.
5 Select a mode
Turn the [AUD] knob or push it towards up or
down.
Display
“PB TYPE REG”
“RETURN”
Operation
Register a voice tag.
Return to step 2.
6 Register the category (type) by performing
steps 5 to 7 in <Adding a voice dialing
command> (page 30).
Exit the voice tag mode
Press the [SEARCH] button.
When a new message arrives
“SMS RECEIVED” is displayed.
The display disappears with any operations.
Displaying the SMS
1 Enter SMS Inbox mode
Select “MENU” > “SMS INBOX”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
A message list appears.
2 Select a message
Turn the [AUD] knob or push it towards up or
down.
• Each pressing of the [38] button for at least 1
second switches between telephone number or
name and message reception date.
3 Display the text
Press the [AUD] knob.
Pressing this button again allows you to select a
message again.
• Message Scroll
Continuously pushing the [AUD] knob towards
right or left scrolls the message.
4 Exit the SMS Inbox mode
Press the [SEARCH] button.
⁄
• The unopened message is displayed at the beginning
of the list. Other messages are displayed in the order of
reception.
• The SMS that has arrived when the cell-phone is not
linked with Bluetooth cannot be displayed. Download
the SMS.
• The short message cannot be displayed during
downloading the SMS.
English |
B64-4317-00_02_E_English.indd 31
31
09.1.6 9:32:47 AM
Function of KDC-BT6544U/BT6544UY/BT6044/BT6144
Bluetooth Setup
Downloading the SMS
Download the short message (SMS) arrived at the
cell-phone so that it can be read on this unit.
1 Enter SMS download mode
Select “MENU” > “SMS DOWNLOAD”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
A message list appears.
2 Start downloading
Press the [AUD] knob.
“DOWNLOADING” is displayed.
When the downloading finishes, “COMPLETE” is
displayed.
3 Exit the SMS download mode
Press the [SEARCH] button.
⁄
• The cell-phone must be able to transmit the SMS using
Bluetooth. Setting on the cell-phone may be required.
If the cell-phone does not support SMS function, the
SMS download item in Function Control mode is not
displayed.
• When the SMS is downloaded from the cell-phone, the
unopened messages in the cell-phone are opened.
• The already-read and unread short messages can be
respectively downloaded up to 75.
32 |
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 32
09.1.6 9:32:47 AM
Accessory of KDC-BT6544U/BT6544UY/BT6144/W5644U
Basic Operations of remote control
In Tuner source
SRC
VOL
SRC
ATT
ATT
VOL
AUD
Band select
[FM]/[AM]
Station select
[4]/[¢]
Recall preset stations
AUD
FM/AM
[1] — [6]
In CD/USB source
DIRECT
2-ZONE
(page 15)
Music select
[4]/[¢]
Folder select
0—9
Pause/Play
[FM]/[AM]
[38]
Hands-free phone control
Making a call
Enter the dialing method selection mode
General control
Volume control
Source select
Select a dialing method
]
Number dial input
[VOL]
[SRC]
Volume reduce [ATT]
When the button is pressed again, the volume returns
to the previous level.
In Audio control
Audio item select
[
[AUD]
Operation type
Input a digit.
Input “+”.
Input “#”.
Input “*”.
Clear the entered phone number.
Make a call
Operation
[0] – [9] buttons
[¢] button
[FM] button
[AM] button
[4] button
[DIRECT]
[AUD]
Adjust the Audio item
Receiving a call
[VOL]
⁄
Answer the call
• Refer to <Audio Control> (page 20) for the operation
method, such as the procedures for Audio control and
others operations.
[
]
Switch between the private talk mode and the
hands-free talk mode
[38]
Call waiting
Dual Zone control
Dual zone system on and off
[2-ZONE]
Rear channel volume control
[5]/ [∞]
Answer Another Incoming Call with the Current
Call Suspended [ ]
Answer another Incoming Call after Terminating
the Current Call [SRC]
Continue the Current Call
[1]
During a call
End the call
[SRC]
Adjust the voice volume
[VOL]
English |
B64-4317-00_02_E_English.indd 33
33
09.1.6 9:32:47 AM
Accessory of KDC-BT6544U/BT6544UY/BT6144/W5644U
Basic Operations of remote control
Loading and Replacing battery
Use two “AA”/ “R6”-size batteries.
Slide the cover while pressing downwards to remove
it as illustrated.
Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.
¤ CAUTION
• Do not leave the battery near fire or under direct
sunlight. A fire, explosion or excessive heat
generation may result.
• Do not set the remote control in hot places such
as on the dashboard.
34 |
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 34
09.1.6 9:32:48 AM
Appendix
About Audio file
• Playable Audio file
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)
• Playable disc media
CD-R/RW/ROM
• Playable disc file format
ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
• Playable USB device
USB mass storage class
• Playable USB device file system
FAT16, FAT32
Although the audio files are complied with the
standards listed above, the play maybe impossible
depending on the types or conditions of media or
device.
• Playing order of the Audio file
In the example of folder/file tree shown below, the
files are played in the order from ① to ⑩.
<: Folder
Folder
CD ()
v : Audio
Audiofile
fi
v
v
v
v
v
v.
An online manual about audio files is put on the
site, www.kenwood.com/audiofile/. On this online
manual, detailed information and notes which are not
written in this manual are provided. Make sure to read
through the online manual as well.
⁄
• In this manual, the word “USB device” is used for flash
memories and digital audio players which have USB
terminals.
• The word “iPod” appearing in this manual indicates the iPod
or the iPhone connected with the iPod connection cable*
(optional accessory).
* Not supported model KCA-iP500.
Refer to the web site for connectable iPod and iPod
connection cable.
www.kenwood.com/ipod/kca_ip/
About USB device
• If you start playback after connecting the iPod, the
music that has been played by the iPod is played
first.
In this case, “RESUMING” is displayed without
displaying a folder name, etc. Changing the browse
item will display a correct title, etc.
• You cannot operate iPod if “KENWOOD” or “✓”
displayed on iPod.
• When the USB device is connected to this unit,
it can be charged up provided that this unit is
powered.
• Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
• You cannot connect a USB device via a USB hub and
Multi Card Reader.
• Take backups of the audio files used with this unit.
The files can be erased depending on the operating
conditions of the USB device.
We shall have no compensation for any damage
arising out of erasure of the stored data.
• No USB device comes with this unit. You need to
purchase a commercially available USB device.
• When connecting the USB device, usage of the
CA-U1EX (option) is recommended.
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
Connecting a cable whose total length is longer
than 5 m can result in abnormal playback.
About the Cell-Phone
This unit conforms to the following Bluetooth
specifications:
Version
Bluetooth Standard Ver. 2.0
Profile
HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phonebook Access Profile)
SYNC (Synchronization Profile)
For the cell-phones verified for compatibility, access
the following URL:
http://www.kenwood.com/bt/information/
⁄
• The units supporting the Bluetooth function have been
certified for conformity with the Bluetooth Standard
following the procedure prescribed by Bluetooth
SIG. However, it may be impossible for such units to
communicate with your cell-phone depending on its type.
• HFP is a profile used to make a hands-free call.
• OPP is a profile used to transfer data such as a phone book
between units.
English |
B64-4317-00_02_E_English.indd 35
35
09.1.6 9:32:48 AM
Appendix
For operating KCA-BT200 (Optional)
For operation refer to Model-B-2 in the Instruction
Manual of KCA-BT200, and the table below.
“P-STATUS”
“BT-CON Y”
“BT-CON N”
Notation used in the KCA-BT200
Instruction Manual
[38] button
Control knob
Press the [AUTO]/[TI] button
Menu Glossary
Operation
[AUD] knob
[AUD] knob
Press the [38] button for at
least 1 second.
Control knob knob towards up or down [AUD] knob knob towards up
or down
Control knob knob towards left or right [AUD] knob knob towards left
or right
For operating KCA-BT100 (Optional)
However, the following control methods of the
function for this unit may be different from the
Instruction manual; therefore, refer to the following
supplemental instruction.
<Dialing by Using the Quick Dialing Function>
1. Press the [AUD] knob. Select the “NUMBER DIAL”
display.
2. Press the [SEARCH] button.
3. Select the number to recall by turning the [AUD]
knob.
4. Press the [AUD] knob.
<Registering to the Preset Dial Number List>
1. Operation is the same. Refer to the instruction
manual of KCA-BT100.
2. Press the [SEARCH] button.
3. Select the number to memory by turning the
[AUD] knob.
4. Press the [AUD] knob for at least 2 seconds.
<Deleting a Registered Cell-Phone>
1–3. Operation is the same. Refer to the instruction
manual of KCA-BT100.
4. Press the [AUD] knob at least 1 second.
5. Press the [SEARCH] button.
<Menu System>
For how to operate Menu, refer to <Function
Control> in this instruction manual.
About display
Cell-Phone Status is displayed in the status display of
this unit.
Moreover, some displays are different from the
description of KCA-BT100 Instruction Manual.
Displays of KCA-BT100 Instruction
Manual
“DISCONCT”
“CONNECT”
“PHN-DEL”
36 |
“DVC STATUS”
“HF CONNECT Y”
“HF CONNECT N”
• AF (Alternative Frequency)
When the reception is poor, automatically alternate to
another frequency broadcasting the same program in
the same RDS network with better reception.
• AMP
Selecting “OFF” turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
• AUTO ANS (Setting the Time Interval for
Automatic Answer)
This function automatically answers (responds
to) a call after lapse of the preset time interval for
automatic answer.
“OFF” : Does not answer the phone call
automatically.
“0” : Automatically answers the phone call at once.
“1s” – “99s” : Automatically answers the phone call
after lapse of 1 – 99 seconds.
⁄
• If the time set in the cell-phone is shorter than that set in
the unit, the former will be used.
• This function does not work for call waiting.
• AUX
When this is set to ON, AUX source can be selected.
ON1: Allows AUX source to be selected. Use this
setting when the built-in AUX terminal is
connected to the external equipment all the
time.
ON2: Activates the attenuator function when
turning on the power with AUX source
selected. Cancel the attenuator function
by turning the volume knob clockwise
when listening to the audio of the external
equipment.
OFF: Disable AUX source selection. Use this setting
when the built-in AUX terminal is not used.
• CALL BEEP (Setting the Beep of the Incoming Call)
You can output a beep from the speaker when a
call comes in.
“ON” : Beep is heard.
“OFF” : Beep is canceled.
Actual displays on this unit
“HF DISCONCT”
“HF CONNECT”
“DEVICE DEL”
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 36
09.1.6 9:32:48 AM
• CD READ
Sets the method for reading CD.
When unable to play special format CD, set this
function to “2” to force playing. Note that some
music CD may be unplayable even when set to “2”.
In addition, audio files cannot be played when set
to “2”. Normally, keep this set to “1”.
1 : Automatically distinguishes between audio file
disc and music CD when playing disc.
2 : Forces playing as music CD.
• DISPLAY
If this unit is not operated at least 5 seconds with
“OFF” selected, the display turns off. During a setup
mode, the display will not turn off even if 5 seconds
lapse.
• DTA (Digital Time Alignment)
Make fine adjustment of the delay time of the
speaker output specified at <Cabin selection>
(page 23) to have a more suitable environment for
your vehicle.
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and the height
of the reference point to the position of the ears
of the person sitting in the front seat, and set
the right and left positions to the center of the
vehicle interior.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the distance difference in accordance
with the farthest speaker.
+100cm
FRONT
FRONT
50cm
80cm
REAR
REAR
150cm
+70cm
+0cm
SUB-W
• DVC STATUS (Displaying the Bluetooth device
Status)
You can display the connection status, signal
strength, and battery level.
: Battery level of cell-phone.
Nearly dead
Full
: Signal strength of cell-phone.
Maximum
Minimum
⁄
• Icons are not displayed if information cannot be
obtained from the cell-phone.
• Since the number of steps of the control unit is different
from that of the cell-phone, the statuses displayed on
the control unit may discord from those displayed on
the cell-phone.
• HIGHWAY-SND (Highway sound)
Increases the volume of faintest sound being lost
by road noises to make the sound more audible.
Additionally, it accentuates bass sound being
lost by road noises to make the bass sound more
dynamic.
• MIC GAIN
Adjusts the sensitivity of the built-in microphone
for a telephone call. Adjust the voice of caller.
Setting to “+” increases the voice volume.
• NEWS (News Bulletin with Timeout Setting)
Automatically receives news bulletin when it
starts. Set the time during which interrupt is to be
disabled after start of another news bulletin.
Changing “NEWS 00M” to “NEWS 90M” turns this
function ON.
If news bulletin starts when this function is ON,
“TRAFFIC” is displayed and news is received. If “20M”
is has been set, reception of another news bulletin
will not start for 20 minutes.
The news bulletin volume is the same level that
was set for Traffic Information.
• NR LEVEL
Reduces the noises generated by surrounding
environment without changing the built-in
microphone volume. Adjust the voice of caller
when it is not clear. Setting to “+” increases the
noise reduction.
• POWER OFF (Power OFF Timer)
Setting the timer to turn this unit’s power OFF
automatically when Standby mode continues.
Using this setting can save the vehicle’s battery
power.
– – –: Power OFF Timer function is OFF.
20min: Turns the power OFF after 20 minutes.
(Factory setting)
40min: Turns the power OFF after 40 minutes.
60min: Turns the power OFF after 60 minutes.
English |
B64-4317-00_02_E_English.indd 37
37
09.1.6 9:32:48 AM
Appendix
• RUSSIAN (Russian language setting)
When this is set to ON, the following character
strings are displayed in Russian:
Folder name/ File name/ Song title/ Artist name/
Album name/ KCA-BT200/BT100 (optional
accessory)
• SEEK (Tuning mode select)
Select a tuning mode of the radio.
Tuning mode
Auto seek
Preset station seek
Manual
Display
“AUTO1”
“AUTO2”
Operation
Automatic search for a station.
Search in order of the stations in the
Preset memory.
“MANUAL” Normal manual tuning control.
• SP SEL (Setting up the Voice Output Speakers)
You can specify the voice output speakers.
“FRONT” : Outputs voice from the front-left and
front-right speakers.
“F-R” : Outputs voice from the front-right speaker.
“F-L” : Outputs voice from the front-left speaker.
⁄
• Select the speaker which is further from the microphone
in order to prevent howling or echoes.
• SUPREME
Technology to extrapolate and supplement with
proprietary algorithm, the high-frequency range
that is cut off when encoding at low bit rate (less
than 128Kbps, Sampling frequency is 44.1kHz).
Supplementing is optimized by compression
format (AAC, MP3 or WMA) and processed
according to bit rate.
The effect is negligible with music that is encoded
at high bit rate, variable bit rate or has minimal high
frequency range.
• SUPREME PLUS
Improved version of SUPREME. It compensates
the clarity and transparency of the voice in the
compressed audio files and CD-DA music to
produce highly realistic vocal sound.
• SWPRE (Switching Preout)
Switches the preout between rear output (“REAR”)
and subwoofer output (“SUB-W”).
• ZONE2 (Dual Zone)
Set the destination (front speaker “FRONT” or rear
speaker “REAR”) of the sub source (AUX IN) when
the Dual Zone function is turned on.
38 |
This Product is not installed by the manufacturer of a
vehicle on the production line, nor by the professional
importer of a vehicle into an EU Member State.
Information on Disposal of Old Electrical
and Electronic Equipment and Batteries
(applicable for EU countries that have
adopted separate waste collection systems)
Products and batteries with the symbol
(crossed-out wheeled bin) cannot be
disposed as household waste.
Old electrical and electronic equipment
and batteries should be recycled at a facility
capable of handling these items and their
waste byproducts.
Contact your local authority for details in
locating a recycle facility nearest to you.
Proper recycling and waste disposal will
help conserve resources whilst preventing
detrimental effects on our health and the
environment.
Notice: The sign “Pb” below the symbol for
batteries indicates that this battery
contains lead.
The marking of products using lasers
(Except for some areas)
CLASS 1
LASER PRODUCT
The label is attached to the chassis/case and says
that the component uses laser beams that have been
classified as Class 1. It means that the unit is utilizing
laser beams that are of a weaker class. There is no
danger of hazardous radiation outside the unit.
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 38
09.1.6 9:32:49 AM
Accessories/ Installation Procedure
Accessories
•
1
•
..........1
•
2
•
..........2
•
Installation Procedure
1. To prevent short circuits, remove the key from the
ignition and disconnect the - terminal of the
battery.
2. Make the proper input and output wire
connections for each unit.
3. Connect the wire on the wiring harness.
4. Take Connector B on the wiring harness and
connect it to the speaker connector in your vehicle.
5. Take Connector A on the wiring harness and
connect it to the external power connector on your
vehicle.
6. Connect the wiring harness connector to the unit.
7. Install the unit in your car.
8. Reconnect the - terminal of the battery.
9. Press the reset button.
¤
• Mounting and wiring this product requires skills and
experience. For safety’s sake, leave the mounting and wiring
work to professionals.
• Make sure to ground the unit to a negative 12V DC power
supply.
• Do not install the unit in a spot exposed to direct sunlight
or excessive heat or humidity. Also avoid places with too
much dust or the possibility of water splashing.
• Do not use your own screws. Use only the screws provided.
If you use the wrong screws, you could damage the unit.
• If the power is not turned ON (“PROTECT” is displayed),
the speaker wire may have a short-circuit or touched the
chassis of the vehicle and the protection function may
have been activated. Therefore, the speaker wire should be
checked.
• Make sure that all wire connections are securely made by
inserting jacks until they lock completely.
• If your vehicle’s ignition does not have an ACC position, or
if the ignition wire is connected to a power source with
constant voltage such as a battery wire, the power will not
be linked with the ignition (i.e., it will not turn on and off
along with the ignition). If you want to link the unit’s power
•
•
•
with the ignition, connect the ignition wire to a power
source that can be turned on and off with the ignition key.
Use a commercially available conversion connector if the
connector does not fit in the vehicle connector.
Insulate unconnected wires with vinyl tape or other similar
material. To prevent a short circuit, do not remove the caps
on the ends of the unconnected wires or the terminals.
If the console has a lid, make sure to install the unit so that
the faceplate will not hit the lid when closing and opening.
If the fuse blows, first make sure the wires aren’t touching
to cause a short circuit, then replace the old fuse with one
with the same rating.
Connect the speaker wires correctly to the terminals to
which they correspond. The unit may be damaged or fail to
work if you share the - wires or ground them to any metal
part in the car.
After the unit is installed, check whether the brake lamps,
blinkers, wipers, etc. on the car are working properly.
Mount the unit so that the mounting angle is 30° or less.
Reception may drop if there are metal objects near the
Bluetooth antenna.
Bluetooth antenna unit
For Good Reception
To assure good reception, note the following:
• Communicate with the cell-phone within the lineof-sight distance of 10 m (30 ft). The communication
range becomes shorter depending on the
surrounding environment. The communication
range also becomes shorter when there is an
obstacle between this unit and the cell-phone. The
above maximum communication range (10 m) is
not always assured.
• A broadcast station or walkie-talkie located nearby
can interfere with communication due to too strong
signal.
English |
B64-4317-00_02_E_English.indd 39
39
09.1.6 9:32:50 AM
Connecting Wires to Terminals
AUX input (Stereo)
Use the mini-plug cable which is stereo type
and does not have any resistance.
USB connector (KDC-BT6544U/BT6544UY/
W5544U/W5644U only)
KDC-BT6544U/KDC-BT6544UY
Front side
Steering remote control (Light Blue/Yellow)
REMO.CONT
R
L
Rear output
Front output
⁄
To use the steering wheel remote control feature, you
need to an exclusive remote adapter (not supplied)
matches your car is required.
Sub Woofer output
KDC-BT6044/KDC-BT6144/KDC-W5544U/KDC-W5644U
R
L
Rear output/Sub Woofer output
Antenna Cord
FM/AM antenna input (JASO)
Fuse (10A)
To Kenwood disc changer/External optional accessory
(KDC-BT6544U/BT6544UY/ W5544U/W5644U only)
Wiring harness
(Accessory1)
TEL mute wire (Brown)
MUTE
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
(KDC-W5544U/W5644U only)
To connect the Kenwood navigation system,
consult your navigation manual.
⁄
If no connections are made, do not
let the wire come out from the tab.
Power control/Motor antenna
control wire (Blue/White)
P.CONT
ANT.CONT
Connect either to the power control terminal
when using the optional power amplifier, or to the
antenna control terminal in the vehicle.
Battery wire (Yellow)
Ignition wire (Red)
See next page
A–7 Pin (Red)
A–4 Pin (Yellow)
40 |
8
7
6
5
4
3
2
1
Connector A
8
7
6
5
4
3
2
1
Connector B
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 40
09.1.6 9:32:51 AM
Functions
2WARNING
Connecting the ISO Connector
Yellow
Blue/White
Orange/White
Red
Black
Battery
Power Control
Dimmer
Ignition (ACC)
Earth (Ground)
Connection
The pin arrangement for the ISO connectors depends on
the type of vehicle you drive. Make sure to make the proper
connections to prevent damage to the unit.
The default connection for the wiring harness is described in
1 below. If the ISO connector pins are set as described in 2,
make the connection as illustrated.
Please be sure to reconnect the cable as shown 2 below to
install this unit to the Volkswagen vehicles etc.
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Green/Black
Rear Right (+)
Rear Right (–)
Front Right (+)
Front Right (–)
Front Left (+)
Front Left (–)
Rear Left (+)
Rear Left (–)
Connector Function Guide
Pin Numbers for
ISO Connectors
External Power
Connector
A-4
A-5
A-6
A-7
A-8
Speaker
Connector
B-1
B-2
B-3
B-4
B-5
B-6
B-7
B-8
Cable Colour
1 (Default setting) The A-7 pin (red) of the vehicle’s
ISO connector is linked with the ignition, and
the A-4 pin (yellow) is connected to the constant
power supply.
Ignition cable (Red)
A-7 Pin (Red)
Unit
Battery cable (Yellow)
Vehicle
A-4 Pin (Yellow)
2 The A-7 pin (red) of the vehicle’s ISO connector is
connected to the constant power supply, and the
A-4 pin (yellow) is linked to the ignition.
Ignition cable
(Red)
Unit
Battery cable
(Yellow)
A-7 Pin (Red)
Vehicle
A-4 Pin (Yellow)
English |
B64-4317-00_02_E_English.indd 41
41
09.1.6 9:32:52 AM
Installation/Removing the Unit
Installation
Removing the hard rubber frame
1 Engage the catch pins on the removal tool and
remove the two locks on the upper level.
Upper the frame and pull it forward as shown in
the figure.
Lock
Catch
Bend the tabs of the mounting
sleeve with a screwdriver or similar
utensil and attach it in place.
⁄
Accessory2
Removal tool
• Make sure that the unit is installed securely in place. If the
unit is unstable, it may malfunction (for example, the sound
may skip).
2 When the upper level is removed, remove the
lower two locations.
⁄
• The frame can be removed from the bottom side in the
same manner.
Removing the Unit
1 Refer to the section <Removing the hard rubber
frame> and then remove the hard rubber frame.
2 Insert the two removal tools deeply into the slots
on each side, as shown.
3 Lower the removal tool toward the bottom, and
pull out the unit halfway while pressing towards
the inside.
Accessory2
¤
• Be careful to avoid injury from the catch pins on the
removal tool.
¤ CAUTION
4 Pull the unit all the way out with your hands, being
careful not to drop it.
Install this unit in the console of your vehicle.
Do not touch the metal part of this unit
during and shortly after the use of the
unit. Metal part such as the heat sink and
enclosure become hot.
42 |
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 42
09.1.6 9:32:52 AM
Troubleshooting Guide
Some functions of this unit may be disabled by
some settings made on this unit.
!
!
• Cannot set up the subwoofer.
• Cannot set up the low pass filter.
• No output from the subwoofer.
▲ • <Subwoofer output> of <Basic Operation> (page 4)
is not set to On.
• Preout is not set to subwoofer. ☞ “SWPRE” of
<Function Control> (page 6)
• Cannot register a security code.
• Cannot set up Display.
▲ <Demonstration mode Setting> (page 20) is not
turned off.
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
General
?
The Touch Sensor Tone does not sound.
✔ The preout jack is being used.
☞ The Touch Sensor Tone cannot be output from
the preout jack.
Tuner source
?
The specified disc does not play, but another one
plays instead.
✔ The specified CD is quite dirty.
☞ Clean the CD, referring to the CD cleaning of the
section on <Handling CDs> (page 3).
✔ The disc is loaded in a different slot from that
specified.
☞ Eject the disc magazine and check the number
for the specified disc.
✔ The disc is severely scratched.
☞ Try another disc instead.
Audio file source
?
?
The hands-free talk volume is low.
✔ The hands-free talk volume is set at a low level.
☞ The hands-free talk volume can be adjusted
independently. Adjust it during hands-free talk.
“MENU” > “MIC GAIN” and “NR LEVEL” <Function
Control> (page6).
?
No sound is heard from the rear speakers.
✔ You are talking in the hand-free talk mode.
☞ No sound is heard from the rear speakers in the
hands-free talk mode.
?
No beep is heard at reception of an incoming call.
✔ No beep is heard depending on the type of your
cell-phone.
☞ The “MENU” > “CALL BEEP” of <Function Control>
(page 6) is set ON.
?
Voice is not recognized.
✔ The vehicle window is open.
☞ If the surrounding noise is large, voice cannot be
recognized properly. Close the vehicle windows
to reduce noise.
✔ Small voice.
☞ If voice is too small, it cannot be recognized
properly. Speak into the microphone a little more
loudly and naturally.
✔ The person uttering the voice tag is not the one who
registered the it.
☞ Only the voice of the person who registered the
voice tag can be recognized.
Radio reception is poor.
✔ The car antenna is not extended.
☞ Pull the antenna out all the way.
Disc source
?
Hands-free
The sound skips when an Audio file is being
played.
✔ The media is scratched or dirty.
☞ Clean the media, referring to the CD cleaning of
the section on <Handling CDs> (page 3).
✔ The recording condition is bad.
☞ Record the media again or use another media.
The messages shown below display your
systems condition.
TOC ERROR:
• No disc has been loaded in the disc
magazine.
• The CD is quite dirty. The CD is upsidedown. The CD is scratched a lot.
ERROR 05:
The disc is unreadable.
ERROR 77:
The unit is malfunctioning for some reason.
➪ Press the reset button on the unit. If the
“ERROR 77” code does not disappear,
consult your nearest service center.
ERROR 99:
Something is wrong with the disc magazine.
Or the unit is malfunctioning for some reason.
➪ Check the disc magazine. And then press
the reset button on the unit. If the “ERROR
99” code does not disappear, consult your
nearest service center.
IN (Blink):
The CD player section is not operating
properly.
➪ Reinsert the CD. If the CD cannot be
ejected or the display continues to flash
even when the CD has been properly
reinserted, please switch off the power
and consult your nearest service center.
English |
B64-4317-00_02_E_English.indd 43
43
09.1.6 9:32:52 AM
Troubleshooting Guide
PROTECT (Blink):
The speaker wire has a short-circuit or
touches the chassis of the vehicle, and then
the protection function is activated.
➪ Wire or insulate the speaker cable
properly and press the reset button. If
the “PROTECT” code does not disappear,
consult your nearest service center.
HF DISCONCT: The unit cannot communicate with the cellphone.
HF ERROR 07:
The memory cannot be accessed.
➪ Turn off the power and on again. If this
message still appears, press the reset
button on the control unit.
HF ERROR 68:
The unit cannot communicate with the cellphone.
➪ Turn off the power and on again. If this
message still appears, press the reset
button on the control unit.
NA FILE:
An Audio file is played with a format that this
unit can’t support.
COPY PRO:
A copy-protected file is played.
READ ERROR:
The file system of the connected USB device
is broken.
➪ Copy the files and folders for the USB
device again. If the error message is still
displayed, initialize the USB device or use
other USB devices.
UNKNOWN:
The Bluetooth device cannot be detected.
DEVICE FULL:
5 Bluetooth device have already been
registered. No more Bluetooth device cannot
be registered.
The USB device is selected as a source
although no USB device is connected.
➪ Change the source to any source other
than USB. Connect an USB device, and
change the source to USB again.
CONNECT NG: The unit cannot be connected to the device.
NO DEVICE:
N/A DEVICE:
• An unsupported USB device is connected.
• Connection to the iPod has failed.
➪ Check that the connected iPod is an iPod
that is supported. See <About Audio file>
(page 35) for information on supported
iPods.
PIN CODE NG: The PIN code is wrong.
PAIRING NG:
Pairing error.
NO MATCHING: The voice tag is wrong. Voice cannot be
recognized because of an unregistered voice
tag, etc.
TOO SOFT:
Voice is too small and cannot be recognized.
TOO LOUD:
Voice is too large to be recognized.
TOO LONG:
The word or utterance is too long to be
recognized.
NO MUSIC DATA/ERROR 15:
• The connected USB device contains no
playable audio file.
• Media was played that does not have data
recorded that the unit can play.
NO PHONEBOOK:
Data is not contained in the phone book.
USB ERROR:
NO RECORD:
iPod ERROR:
Some trouble may have occurred to the
connected USB device.
➪ Remove the USB device, then cycle the
power switch to ON. If the same display is
repeated, use another USB device.
Connection to the iPod has failed.
➪ Remove the USB device and then
reconnect it.
➪ Confirm that the software for the iPod is
the latest version.
NO MESSAGE: No short message in In Box.
The voice tag is not registered in the
phonebook.
MEMORY FULL: The number of voice tags reaches the
maximum number to be registered in the
phonebook.
FAV: NO MEMORY:
The procedure is not registered to Favorite
Preset Memory
NO ACCESS:
USB REMOVE (Blink):
The Remove mode has been selected for the
USB device/iPod. You can remove the USB
device/iPod safely.
The procedure preset with Favorite Control
cannot be available. The preset content may
not be recalled depending on the selected
source or mode.
NO VOICE:
No call.
NO NUMBER:
• The calling party does not notify a caller ID.
• There is no phone number data.
NO PANEL:
The faceplate of the slave unit being
connected to this unit has been removed.
NO DATA:
• There is no outgoing call list.
• There is no incoming call list.
• There is no missed call list.
• There is no phone book list.
NO ENTRY:
The cell-phone has not been registered
(pairing).
44 |
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 44
09.1.6 9:32:52 AM
Specifications
FM tuner section
Frequency range (50 kHz space)
: 87.5 MHz – 108.0 MHz
Usable sensitivity (S/N = 26dB)
: 0.7 μV/75 Ω
Quieting Sensitivity (S/N = 46dB)
: 1.6 μV/75 Ω
Frequency response (±3.0 dB)
: 30 Hz – 15 kHz
Signal to Noise ratio (MONO)
: 65 dB
Selectivity (DIN) (±400 kHz)
: ≥ 80 dB
Stereo separation (1 kHz)
: 35 dB
MW tuner section
Frequency range (9 kHz space)
: 531 kHz – 1611 kHz
Usable sensitivity (S/N = 20dB)
: 25 μV
LW tuner section
Frequency range
: 153 kHz – 281 kHz
Usable sensitivity (S/N = 20dB)
: 45 μV
Bluetooth section
(KDC-BT6544U/BT6544UY/BT6044/BT6144)
Version
: Bluetooth Ver. 2.0 Certified
Frequency range
: 2.402 – 2.480 GHz
Output Power
: +4dBm (MAX), 0dBm (AVE) Power Class 2
Maximum Communication range
: Line of sight approx.10m (32.8 ft)
Profiles
: HFP (Hands Free Profile)
: HSP (Headset Profile)
: SPP (Serial Port Profile)
: PBAP (Phonebook Access Profile)
: OPP (Object Push Profile)
: SYNC (Synchronization Profile)
CD player section
Laser diode
: GaAlAs
Digital filter (D/A)
: 8 Times Over Sampling
D/A Converter
: 24 Bit
Spindle speed
: 500 – 200 rpm (CLV)
Wow & Flutter
: Below Measurable Limit
Frequency response (±1 dB)
: 20 Hz – 20 kHz
Total harmonic distortion (1 kHz)
: 0.01 %
Signal to Noise ratio (1 kHz)
: 110 dB
Dynamic range
: 93 dB
MP3 decode
: Compliant with MPEG-1/2 Audio Layer-3
WMA decode
: Compliant with Windows Media Audio
AAC decode
: AAC-LC “.m4a” files
USB Interface
(KDC-BT6544U/BT6544UY/W5544U/
W5644U)
USB Standard
: USB1.1/ 2.0 (Full speed)
Maximum Supply current
: 500 mA
File System
: FAT16/ 32
MP3 decode
: Compliant with MPEG-1/2 Audio Layer-3
WMA decode
: Compliant with Windows Media Audio
AAC decode
: AAC-LC “.m4a” files
English |
B64-4317-00_02_E_English.indd 45
45
09.1.6 9:32:52 AM
Specifications
Audio section
Maximum output power
: 50 W x 4
Output power (DIN 45324, +B=14.4V)
: 22 W x 4
Speaker Impedance
:4–8Ω
Tone action
(KDC-BT6044/BT6144/W5544U/W5644U)
Bass : 100 Hz ±8 dB
Middle : 1 kHz ±8 dB
Treble : 10 kHz ±8 dB
Tone action (KDC-BT6544U/BT6544UY)
BAND1 : 60 Hz - 400 Hz ±9 dB
BAND2 : 630 Hz - 2.5 kHz ±9 dB
BAND3 : 4.0 kHz - 16 kHz ±9 dB
Preout level / Load (CD)
: 2500 mV/10 kΩ
Preout impedance
: ≤ 600 Ω
Auxiliary input
Frequency response (±1 dB)
: 20 Hz – 20 kHz
Input Maximum Voltage
: 1200 mV
Input Impedance
: 100 kΩ
General
Operating voltage (10.5 – 16V allowable)
: 14.4 V
Maximum Current consumption
: 10 A
Installation Size (W x H x D)
: 182 x 53 x 155 mm
Weight
: 1.2 kg
Specifications subject to change without notice.
46 |
• The “AAC” logo is a trademark of Dolby Laboratories.
• The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Kenwood Corporation is under license. Other
trademarks and trade names are those of their
respective owners.
• iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
• iPhone is a trademark of Apple Inc.
• “Made for iPod” means that an electronic accessory
has been designed to connect specifically to iPod and
has been certified by the developer to meet Apple
performance standards.
• “Works with iPhone” means that an electronic
accessory has been designed to connect specifically
to iPhone and has been certified by the developer to
meet Apple performance standards.
Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
B64-4317-00_02_E_English.indd 46
09.1.6 9:32:53 AM
• Declaration of Conformity with regard to
the EMC Directive 2004/108/EC
• Declaration of Conformity with regard to
the R&TTE Directive 1999/5/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
Český
Kenwood timto prohlasuje, ze KDC-BT6544U/KDC-BT6544UY/KDC-BT6044/
KDC-BT6144 je ve shode se zakladnimi pozadavky a s dalsimi prislusnymi
ustanoveni Narizeni vlady c. 426/2000 Sb.
Magyar
Alulírott, Kenwood, kijelenti, hogy a jelen KDC-BT6544U/KDC-BT6544UY/
KDC-BT6044/KDC-BT6144 megfelel az 1999/5/EC irányelvben meghatározott
alapvető követelményeknek és egyéb vonatkozó előírásoknak.
Svenska
Härmed intygar Kenwood att denna KDC-BT6544U/KDC-BT6544UY/KDCBT6044/KDC-BT6144 stär l överensstämelse med de väsentliga egenskapskrav
och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Suomi
English
Hereby, Kenwood declares that this unit KDC-BT6544U/KDC-BT6544UY/KDCBT6044/KDC-BT6144 is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
Français
Par la présente Kenwood déclare que l’appareil KDC-BT6544U/KDC-BT6544UY/
KDC-BT6044/KDC-BT6144 est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE.
Par la présente, Kenwood déclare que ce KDC-BT6544U/KDC-BT6544UY/KDCBT6044/KDC-BT6144 est conforme aux exigences essentielles et aux autres
dispositions de la directive 1999/5/CE qui lui sont applicables.
Deutsch
Hiermit erklärt Kenwood, dass sich dieser KDC-BT6544U/KDC-BT6544UY/
KDC-BT6044/KDC-BT6144 in Übereinstimmung mit den grundlegenden
Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/
EG befindet. (BMWi)
Hiermit erklärt Kenwood die Übereinstimmung des Gerätes KDC-BT6544U/KDCBT6544UY/KDC-BT6044/KDC-BT6144 mit den grundlegenden Anforderungen
und den anderen relevanten Festlegungen der Richitlinie 1999/5/EG. (Wien)
Nederlands
Hierbij verklaart Kenwood dat het toestel KDC-BT6544U/KDC-BT6544UY/
KDC-BT6044/KDC-BT6144 in overeenstemming is met de essentiële eisen en de
andere relevante bepalingen van richtlijn 1999/5/EG.
Bij deze verklaat Kenwood dat deze KDC-BT6544U/KDC-BT6544UY/KDCBT6044/KDC-BT6144 voldoet aan de essentiële eisen en aan de overige
relevante bepalingen van Richtlijn 1999/5/EC.
Italiano
Con la presente Kenwood dichiara che questo KDC-BT6544U/KDC-BT6544UY/
KDC-BT6044/KDC-BT6144 è conforme ai requisiti essenziali ed alle altre
disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Español
Por medio de la presente Kenwood declara que el KDC-BT6544U/KDCBT6544UY/KDC-BT6044/KDC-BT6144 cumple con los requisitos esenciales y
cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/
CE.
Português
Kenwood declara que este KDC-BT6544U/KDC-BT6544UY/KDC-BT6044/
KDC-BT6144 está conforme com os requisitos essenciais e outras disposições da
Directiva 1999/5/CE.
Kenwood vakuuttaa täten että KDC-BT6544U/KDC-BT6544UY/KDC-BT6044/
KDC-BT6144 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja
sitä koskevien direktiivin muiden ehtojen mukainen.
Slovensko
S tem Kenwood izjavlja, da je ta KDC-BT6544U/KDC-BT6544UY/KDC-BT6044/
KDC-BT6144 v skladu z osnovnimi zahtevami in ostalimi ustreznimi predpisi
Direktive 1999/5/EC.
Slovensky
Spoločnosť Kenwood týmto vyhlasuje, že KDC-BT6544U/KDC-BT6544UY/KDCBT6044/KDC-BT6144 spĺňa zákldné požiadavky a ďalšie prislušné ustanovenia
Direktĺvy 1999/5/EC.
Dansk
Undertegnede Kenwood erklærer harved, at følgende udstyr KDC-BT6544U/
KDC-BT6544UY/KDC-BT6044/KDC-BT6144 overholder de væsentlige krav og
øvrige relevante krav i direktiv 1999/5/EF.
Ελληνικά
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Kenwood ΔΗΛΩΝΕΙ ΟΤΙ KDC-BT6544U/KDC-BT6544UY/KDCBT6044/KDC-BT6144 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ
ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/EK.
Eesti
Sellega kinnitab Kenwood, et see KDC-BT6544U/KDC-BT6544UY/KDC-BT6044/
KDC-BT6144 vastab direktiivi 1999/5/EC põhilistele nõudmistele ja muudele
asjakohastele määrustele.
Latviešu
Ar šo, Kenwood, apstiprina, ka KDC-BT6544U/KDC-BT6544UY/KDC-BT6044/
KDC-BT6144 atbilst Direktīvas 1999/5/EK galvenajām prasībām un citiem tās
nosacījumiem.
Lietuviškai
Šiuo, Kenwood, pareiškia, kad šis KDC-BT6544U/KDC-BT6544UY/KDC-BT6044/
KDC-BT6144 atitinka pagrindinius Direktyvos 1999/5/EB reikalavimus ir kitas
svarbias nuostatas.
Malti
Hawnhekk, Kenwood, jiddikjara li dan KDC-BT6544U/KDC-BT6544UY/KDCBT6044/KDC-BT6144 jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti
oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Українська
Компанія Kenwood заявляє, що цей виріб KDC-BT6544U/KDC-BT6544UY/
KDC-BT6044/KDC-BT6144 відповідає ключовим вимогам та іншим
пов’язаним положенням Директиви 1999/5/EC.
Polska
Kenwood niniejszym oświadcza, że KDC-BT6544U/KDC-BT6544UY/
KDC-BT6044/KDC-BT6144 spełnia zasadnicze wymogi oraz inne istotne
postanowienia dyrektywy 1999/5/EC.
English |
B64-4317-00_02_E_English.indd 47
47
09.1.6 9:32:53 AM
B64-4317-00_02_E_English.indd 48
09.1.6 9:32:53 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising