IS 360 - Steinel
IS 360
Ceiling Mount Outdoor Occupancy Sensor
Project Name:
Location:
IS 360 Specifications
Item No.
Voltage
60261 white
60251 black
120 VAC, 60 Hz
Maximum Wattage
0-600 watt tungsten
0-300 watt ballast
Sensing Technology
passive infrared (PIR)
Time Delay Setting
Mounting
Light Level Setting
Environment
Coverage
Sensors
Lens Design
10 seconds to 15 minutes
ceiling
.2-200 footcandles, 2-2000 lux
IP54 raintight rated, -4°F to +122°F, -20°C to +50°C
360° up to 40 foot reach (12.2 m)
3 dual element infrared pyroelectric detectors
720 switching zones, 10 levels
Dimensions 4.7 x 4.7 x 3.9 in
(LxWxD) 120 x 120 x 100 mm
Warranty
Certifications
The STEINEL IS 360 occupancy sensor is raintight for safe
reliable operation indoors and out.
The sensors are passive infrared and respond to heat radiated from moving persons or other heat-emitting objects
(such as vehicles). They automatically turn lights on when
presence is detected and off when a space is left vacant.
For unmatched coverage, the IS 360 incorporates three
highly sensitive pyroelectric sensors that provide reliable,
uninterupted 360 coverage.
•
•
•
•
•
•
•
Interior applications that includes vestibules and garages.
Exterior applications that includes entryways, carports, balconies, building soffits.
•
•
Passive Infrared Technology
360° Coverage
C-UL-US Listed, CSA Approved RoHS Compliant
Key Features:
Applications
Voltage
5 years
360° coverage with up to 40 ft reach
720 switching zones for highly accurate small motion
detection
Coverage area may be customized with supplied snap-on
shrouds and through fine-tune rotation adjustment
Precision molded lens is distortion free and watertight
Detects motion directly beneath sensor for immediate
detection
Light level feature allows lighting to remain off during
daylight regardless of occupancy
Automatically adjusts to temperature changes keeping
sensitivity and coverage consistent
Built in surge protection with auto-reset
Raintight IP54 rated; suitable for interior or exterior use
IP54 Rated
Mounting
www.steinel.net
IS 360
Ceiling Mount Outdoor Occupancy Sensor
Coverage
Wiring
40 ft
40 ft
NEUTRAL
HOT
Local OFF
Switch (optional)
L
O
A
D
LINE (BLACK)
NEUTRAL (WHITE)
LOAD (RED)
40 ft
40 ft
40 ft
Typical mounting height is 8 to 12 ft
The IS 360’s unique 180°
angle of aperture enables
the sensor to see straight
out for greater coverage
Coverage Adjustment
Settings
Time Delay
Fine tune
coverage
adjustment is
possible by
rotating the sensor
housing.
Light Level
40 ft
40 ft
Thumbdial adjustments for time delay and
light level are located beneath the decorative
cover
15 ft
Shrouds, supplied
with each unit,
snap in place,
allowing users to
adjust coverage as
needed. 15 ft
15 ft
Controls
15 ft
Mounting plate
Housing
cover
Mounting
The IS 360 mounts to a
NEMA 4 inch watertight round J-box outdoors
and a standard octagon
4 inch J-box indoors
Sensor housing
(rotates for coverage
adjustment)
Coverage shroud
Decorative ring
(adjustments beneath)
www.steinel.net
(800) 852-4343
Detection lens
9051 Lyndale Avenue South, Bloomington, MN 55420
M-01601-1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising