Alpha Continuity 6K - 10K Datasheet
True Double Conversion On-line Technology
The Alpha Continuity 6K-10K Series completely regenerates utility
power. It not only corrects and cleans the utility power, but the
VFI(Voltage Frequency Independence) of the Alpha Continuity 6K-10K
Series complies with the international EN62040-3 standards.
Dual Input Connections
The Alpha Continuity 6K-10K Series provides single input connections
as standard. Optional input terminal connections for the bypass and
rectifier are available.
LCD/LED Mimic Panel
A precise LCD/LED display provides real time status and parameter
readings. These include AC Input and Output Voltage, Frequency,
Battery Voltage, Load Level, UPS temperature, etc. A full size,
user-friendly microprocessor based LCD display, provides advanced
monitoring functions and simple operation.
Energy-efficient UPS
The AC to AC efficiency of the Alpha Continuity 6K-10K Series may be
up to 90% at 25% load and higher with larger loadings in normal VFI
(Voltage and Frequency Independent) operation. Using the ECO
mode, an efficiency of up to 97% can be achieved.
Parallel Distribution Box (Rack/Wall Mount Type)
Models
RacPDU-260
Input Voltage
200Vac-240Vac
Input Current
Max. 60Arms
Dimension
mm
RacPDU-2120
RacPDU-2200
Max. 120Arms
Max. 200Arms
inch 176H x 440W x 124D
Max. 2pcs
Max. 4pcs
6kVA
6kVA
Application
or 1pce
or 2pcs
10kVA
10kVA
Max. 4pcs
10kVA
Advanced Battery Discharge Management
The Alpha Continuity 6K-10K Series automatically manages the EndDischarge voltage of the internal batteries according to the load. The
ABDM function prevents the deep discharge of the batteries during a
power failure.
Silent Fan Control
The Alpha Continuity 6K-10K Series employs variable-speed, forced air
cooling fans. These fans will vary in speed according to the percentage of
load. This variable-speed control ensures a low audible noise level making
the Alpha Continuity On-line UPS Series suitable for most environments
including offices and hospitals.
Communication Capability
The Alpha Continuity 6K-10K Series is shipped with monitoring and
shutdown software. The software allows the control and graceful shutdown
when utility power fails.
Emergency Power Off
The Emergency Power Off enables users to remotely shutdown the
UPS.
Remote testing of the major operating UPS functions
Communicate via SNMP/WEB card.
Access UPS functions via the WEB.
Smart ECO Mode
Energy Saving using ECO mode.
Super Compact Convertible Design
The Alpha Continuity 6K-10K Series is small and compact. Install the UPS
in a 19” rack and utilize the space efficiently. Optional rack mount rail
available.
Power Range and Runtime Scalability
The Alpha Continuity 6K-10K Series provides an excellent return on
your investment. The system is fully modular and allows you to
increase the overall power output, battery runtime, and redundancy as
your needs and requirements grow. The modular design eliminates
any single point of failure.
Optional Galvanic Isolation Transformer
The Optional Galvanic Transformer provides isolation between the
input and the output of the UPS and various secondary voltage 110/11
5/120/208/220/230/240Vac.
Indoor On-line UPS Series
6.9H x 17.3W x 4.9D
Simple and Easy To Use
The LCD front panel provides direct access to the DSP controller.
Changes to the UPS operational modes and parameters such as
output voltage settings, fine adjustments for frequency, bypass
voltage settings as well as alarms status may be easily performed.
Matching Battery Cabinet
Add matching battery cabinets and extend the back up time up to
several hours.
Continuity 6K-10K
Variety of Customer Options Slots
The Alpha Continuity 6K-10K Series also provides one or two additional
Customer Options Communication slot(s) in additional to the standard
RS232. An internal 2nd RS232, USB, RS485, Dry Contact, or WEB/SNMP
card provides isolated contacts for industrial and remote alarm
applications.
Optional External Battery Charger
With its isolation conversion technology plus precision control, the optional
charger can be installed in Parallel operation up to 4 units.
Customer to supply 5-15R receptacle. The specifications are as follows:
Alpha Continuity Rack Configuration
Alpha Continuity Tower Configuration
> Feature rich on-line UPS series with superior output power factor, enabling energy
efficient system performance
> Simple parallel installation simplifies the setup of N+1 redundant systems
> Up to 4 units working in parallel increases potential power output capacity
AC Input Range
100-280Vac, 45-65Hz
AT Continuity 6K
AT Continuity 10K
Maximum Power Output
1000W, continuously
mm
88H x 440W x 660D
132H x 440W x 660D
3.5H x 17.3W x 26.0D
5.2H x 17.3W x 29.0D
Operation Mode
Constant Voltage with Current Limitation
inch
Maximum Parallel Units
Up to 4 units
w/ MTBS*
42kg (92.5lbs)
41kg (90.3lbs)
49kg (108.0lbs)
48kg (105.8lbs)
Over-voltage, Against Output Short-Circuit
& Isolated devices for Opposite Polarity
Connection
> Emergency shutdown control through EPO complies with national safety regulations and
w/o MTBS**
Protections
Application
For 6K
For 10K
Mounting
Mounted on the rear of the UPS or the wall
> Hot swappable battery allows replacement without interruption to critical loads
Models
Dimension
Net Weight
* AT Continuity 6K and AT Continuity 10K are without MTBS.
** MTBS: Maintenance Bypass Switch
Dimension
mm
282H x 166W x 86D
inch
11.1H x 6.6W x 3.4D
Net Weight
Alpha Technologies Ltd. Canada: Burnaby, British Columbia Tel: 604 436 5900 Fax: 604 436 1233
United States: Bellingham, Washington Tel: 360 647 2360 Fax: 360 671 4936
Alpha Technologies reserves the right to make changes to the products and information contained in this document without notice.
Copyright © 2010 Alpha Technologies. All Rights Reserved. Alpha® is a registered trademark of Alpha Technologies.
member of The Alpha Group™ is a trademark of Alpha Technologies.
> Smart ECO mode allows automatic transfer to inverter supply, maximizing efficiency
3.2kg (7.1lbs)
For more information visit www.alpha.ca
> LCD / LED display panel provides user-friendly interface to UPS
local code
The Alpha Continuity Indoor 6K-10K Series with full-time Digital Signal Processor control technology is the perfect solution for mission critical
users who demand high reliability, availability and performance from a UPS. Input power factor correction, high efficiency and parallel
redundant capability provide a superior level of power quality for sensitive electronic equipment and computer loads.
#0480009-00 Rev D (11/2011)
member of The
Group™
Your Power Solutions Partner
Alpha Continuity 6K-10K Series
Specifications
Models
Continuity 6K
Continuity 10K
132H x 440W x 543D
5.2H x 17.3W x 21.3D
132H x 440W x 680D
5.2H x 17.3W x 26.8D
Mechanical
Models
Continuity 6K
Continuity 10K
Input
Voltage Window
160~280Vac
Frequency
45-65Hz
Phase/Wire
Single, Line + Ground
Power Factor
Up to 0.99 at 100% Linear Load
Current THD (100% linear load)
<7%
Dimensions
mm
inch
Input/Output Connection
Hardwire
External Battery Connection
Plug-in & Play
Net Weight
24kg (52.9lbs)
26.0kg (57.3lbs)
Environment
Output
Operating Temperature
0-40°C (32-104°F)
Temperature Warning
The battery design life is based on a temperature of 25°C (77°F), Ambient temperature above this range will affect
battery life
Voltage Window
200/208/220/240Vac Selectable (208/120Vac optional)
Altitude
0~2000M/6600ft up to 40°C (104°F), 3000M/9900ft up to 35°C (95°F)
Voltage Adjustment
Nominal +1%, +2%, +3%, -1%, -2% or -3%
Humidity
90% RH Maximum, Non-Condensing
Voltage Regulation
±1%
±2%
Noise
<50dB (at 1M/3.3ft)
Capacity
6000VA/5400W
10000VA/9000W
Computer Interface
Rated Power Factor
0.9 Lagging
0.9 Lagging
Interface Type
Standard RS232 Interface
Wave Form
Sine Wave, THD<3% (no load to full load)
Communication Slot
2nd RS232, USB, RS485, Relay Contact or SNMP Card
Frequency Stability
±0.2% (Free Running)
Agency Compliance
Frequency Regulation
±1Hz; ±3Hz
Quality Assurance
ISO9001 Certified
Transfer Time
0ms
Safety Standard
EN62040-1-1, UL1778
Crest Factor
3:1
EMC Standard
EN62040-2, EN61000-3-2, EN61000-3-3, FCC Class A
Efficiency (AC to AC, Normal)
Up to 90%
Marks
CE, cUL, UL
Efficiency (AC to AC, ECO)
Up to 95%
Autonomy
7.1 mins
DC Start
Yes
Model
BP Continuity 6K
BP Continuity 6K
Battery Type
7Ah
9Ah
Type
Sealed Lead Acid Maintenance Free
Maximum Quantity
20pcs
Capacity
12V/7Ah
Output Voltage
240Vdc
Quantity
20pcs
Weight Without Batteries
18.0kg (39.7lbs)
Voltage
240Vdc
Weight With Batteries
52kg (115lbs)
Recharge Time
4 hours to 90%
4.8 mins
Battery
12V/9Ah
5 hours to 90%
Battery Pack
Dimensions
Display
mm
132H x 440W x 680D
inch
5.2H x 17.3 x 26.8D
Status On LED + LCD
Line Mode, Backup Mode, ECO Mode, Bypass Supply, Battery Low, Battery Bad/Disconnect, Overload,
Transferring with interruption & UPS Fault.
*** reference data
Readings on LCD
Input Voltage, Input Frequency, Output Voltage, Output Frequency, Load Percentage, Battery Voltage & Inner
Temperature.
Self-Diagnostics
Upon Power-on, Front Panel Setting & Software Control, 24-hour routine checking
Parallel Redundant On-Line UPS
Using our field proven Digital Signal Processor(DSP) with SMD techniques, the
Alpha Continuity 6K-10K Series achieves high reliability and greater immunity
from utility power problems. The front display panel provides all major systems
parameters and operational status of the UPS that include full diagnostics for
simple, easy servicing. The Alpha Continuity 6K-10K Series uses a patented
inverter control technology that allows it to achieve N+1 scalable redundant
power without the use of additional components. The Alpha Continuity
Redundant parallel configuration also eliminates any single point of failure.
Alarms
Line Failure, Battery Low, Transfer to Bypass, System Fault Conditions
Audible and Visual
Protection
Overload
(w/simulated thermal tripping I-T Curve)
Inverter Supply: 105%~150% for 160 seconds ~ 2 cycles before switching bypass.
Bypass Supply: 105%~200% for 500 seconds ~8 cycles before stopping supply load.
Short Circuit
Switch off Immediately
Overheat
AC Mode: Switch to Bypass
Backup Mode: Switch off the UPS
Battery Low
Alarm and Switch Off
Noise Suppression
Complies with EN62040-2
Spike Suppression
Complies with EN61000-4-5
Heat Dissipation
(At Full Linear
Load)***
Simple Parallel Installation
To increase the power capacity or configuring a parallel redundant UPS system,
up to 3 additional Alpha Continuity 6K-10K Series are simply interconnected
using the CAN-bus RJ45 cables on the rear of the Continuity Redundant series
UPS.
Without Isolated
Transformer Module
<450W
10K: <600W
10KP: <550W
With Isolated
Transformer Module
<615W
10K: <1100W
10KP: <1050W
Leakage Current
Your Power Solutions Partner
<3mA at Full Load
Programmable Frequency Converter
The Alpha Continuity 6K-10K Series may be used as a frequency converter.
Simple programming through the front LCD panel provides the convenience of 50
or 60Hz.
Intelligent Self-Diagnostics
The Alpha Continuity 6K-10K Series with DSP Control, systematically checks each
component and displays the result using on LCD display. This feature allows
service technicians the ability to pinpoint and repair the UPS very quickly.
68.0kg (149.8lbs)
High Input Power Factor and Low Current THD
The Alpha Continuity 6K-10K Series provides a ‘clean’ rectifier connection
to utility source. It meets today’s industry standard for energy saving with
low reflected harmonic pollution to utility. The Alpha Continuity 6K-10K
Series achieves up to 0.99 Input Power Factor as well as <6% Input Current
THD.
Cold Start Function
The Alpha Continuity 6K-10K Series may be powered up without the
presence of utility, providing AC power for immediate power requirements.
Full-time Digital Signal Processor Control
The Alpha Continuity Redundant Full Time DSP control system ensures a pure
sinewave on the input and the output of the UPS. The DSP control also
provides the user with simple access to the UPS systems’ operational
information via the front display panel.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement