Series DVB-S/DSNG/S2 MODULATOR + MPEG ENCODERS (SD/HD)

Series DVB-S/DSNG/S2 MODULATOR + MPEG ENCODERS (SD/HD)
Series
DME
DVB-S/DSNG/S2 MODULATOR + MPEG ENCODERS (SD/HD)
DME series block diagram
FOR SATELLITE UPLINK & MW LINK APPLICATIONS
The high quality, professional and cost-effective solution
MPEG-2 or MPEG-4
Encoder # 2 (option)
MPEG-2 or MPEG-4
Encoder # 3 (option)
(option)
MPEG-2 or MPEG-4
Encoder # 1(option)
Video+Audio
digital
(SDI/AES-EBU)
and Analog
Inputs
BUC
Power supply
+24V
(option)
Transport Stream Input
interface (option)
MULTIPLEXER
Single/double ASI
and/or Ethernet (T.S. over IP)
BISS1/E
Encryption
(option)
DVB-S/S2
Modulator
DVB-S
DVB-DSNG
DVB-S2
“L” Band / 70MHz
IF output
Hi-stability
10MHz ref.
oscillator
(option)
MPEG-2 or MPEG-4
Encoder # 4 (option)
NOTE:
Without the multiplexer card option, the T.S. is generated with NIT and SDT tables.
With the multiplexer card option, are also added the TDT and EIT tables and on the optional transport
stream input is possible to have advanced remultiplexing functions such as PID filtering.
CREATE YOUR OWN EQUIPMENT CODE
Series suffix and number
multiplexer card
(0=no; 1=yes)
number of MPEG-4
(H.264) Encoder cards (*)
number of MPEG-2
Encoder cards (*)
DME 5
0 or 1
0 to 4
0 to 4
Examples:
“DME 5131” = DVB-S/S2 Modulator with multiplexer, №3 MPEG-4 and №1 MPEG-2 encoders
“DME 5012” = DVB-S/S2 Modulator without multiplexer, №1 MPEG-4 and №2 MPEG-2 encoders
“DME 5101” = DVB-S/S2 Modulator with multiplexer, no MPEG-4 and №1 MPEG-2 encoder
“DME 5000” = DVB-S/S2 Modulator with T.S. input (ASI or, optionally, Ethernet for T.S. over IP)
(*) Maximum number of MPEG-4 + MPEG-2 encoders is 4
AVAILABLE MAIN OPTIONS:










Up to №4 MPEG-2 or MPEG-4 (H.264 HD/SD) encoders
BUC power supply (24V 1.9A)
Hi stability 10MHz reference oscillator
Single/double ASI T.S. input
Multistream (up to 6 different T.S.)
Multiplexer card for advanced functions
70MHz output (instead of “L” Band)
Ethernet input (T.S. over IP)
BISS 1/ E encryption – PL scrambler with “Gold Code”
Second (stereo) audio channel (for MPEG4 encoder)
The “DME” is a high quality, professional, flexible and truly costeffective solution for digital satellite uplinks and terrestrial microwave links.
The unit consists of a high performance DVB-S/DSNG/S2
Multistandard modulator with up to four MPEG-2 and/or MPEG-4
(H.264/AVC SD/HD) Encoders in a single 1U rack chassis.
The DVB-S2 modulation supported complies with ETSI EN 302 307
(DVB-S2 standard) for BROADCAST and DSNG applications:
includes all modulation schemes (QPSK, 8PSK, 16APSK and
32APSK), all code rates (both mandatory and optional), CCM
(Constant Coding and Modulation), normal FEC frame, Dummy
frame Insertion, all roll-off factors and null packet deletion/insertion.
A key function of the modulator is the digital non-linear precorrection with the possibility to store and recall of several setups.
This function allows to correct the amplitude and phase vs. level
distortions introduced by the high power amplifiers (HPAs), so
increasing output power, MER and shoulders performances.
Features also include a 10MHz reference clock and the power
supply for the BUC (Block Up Converter).
The DME series, combined with a BUC and a parabolic antenna for
the chosen frequency range (usually Ku band - 14 to 14.5GHz - or
C band 5.85 to 6.43GHz), makes a complete satellite uplink solution.
Another application of the DME is as encoder/s - digital modulator
for agile terrestrial digital microwave links.
Applications:
 Digital satellite Uplinks for Distribution, Contribution, DSNG /
ENG Mobile news gathering;
 Digital Microwave Links (Mobile and STL);
Features:
 Up to 4 real time MPEG-2 (MP@ML – 4:2:0) and/or MPEG-4
(H.264/AVC SD/HD) video/dual audio Encoders;
 Second audio pair option;
 User configurable Encoders settings + easy to recall pre-defined
factory settings;
 Teletext of Closed Captioning extraction from video input and
reinsertion in the Transport Stream;
 Basic T.S. multiplexing functions embedded in MPEG-2 and
MPEG-4 encoders;
 DVB-S / DSNG / S2 Modulator having “L” band or 70MHz output
for Broadcast and DSNG applications;
 Multistream option, with the possibility of transmitting up to 6
different Transport Stream simultaneously;
 ASI and Ethernet (T.S. over IP) input interface options;
 User-friendly local control with front panel LCD display and keypad;
 Ethernet 10/100 Base-T (RJ45 connector - SNMP, web server,
e-mail client) remote control interface;
 Stand-Alone unit 1U high.
All specifications contained in this document may be changed without prior notice.
ABE ELETTRONICA
Via Leonardo da Vinci, 224 24043 Caravaggio (BG) Italy Tel. +39 0363 35 10 07 - Fax +39 0363 50 756 mail@abe.it - www.abe.it
www.abe.it
MPEG-4 (H.264/AVC) SD/HD Encoder Card
VIDEO INPUTS AND ENCODING
Multiplexer card (option)
Tables:
Add / modify (NIT, SDT, TDT, EIT)
Other functions:
PID filtering; MHP support
Video input format:
Digital SD/HD-SDI with embedded or separate AES - EBU audio;
Analog (Standard Definition only) composite PAL / SECAM / NTSC
Digital video input:
SDI / HD-SDI - 75Ω / BNC socket
Analog Composite video input:
1Vp-p / 75Ω / BNC socket
Standard, IP data rate, connector:
IEEE802.3a; 100/1000 Mbps with auto detect; RJ-45 with LEDs
Encoding standard:
ISO/IEC 14496-10 (H.264/AVC, 4:2:0) Main Profile Level 3.0 and High Profile Level 4.0
IP to T.S. delay, T.S. data rate:
1 to 120ms, over 100 Mbps
Bit rate:
From less than 2Mbit/s up to 24Mbit/s. Bit rate mode: CBR, VBR
T.S. over IP encapsulation, addressing mode:
UDP, SMPTE 2022-2 (RTP); Unicast and Multicast (IGMP v2)
Supported resolutions – downscaler:
1920 x 1080 x 60i/50i/24p, 1440 x 1080 x 60i/50i/24p, 1280 x 720 x 60p/50p/24p,
720 x 480 x 60i, 720 x 576 x 50i – Down scaler embedded
FEC:
As per Pro-MPEG Code of Practice #3 release 2 (SMPTE 2022-1); max. matrix size 100
T.S. packets per IP packet
1 to 7 (packet size: 188 or 204)
Ethernet input card (T.S. over IP)
Picture encoding type:
I, P, B
Minimum latency:
Around 500mS - according to settings (GOP structure, bit rate etc.)
Modulation scheme:
QPSK (EN300 421 DVB-S); QPSK, 8PSK, 16QAM (EN 301 210 DVB-DSNG);
QPSK, 8PSK, 16APSK, 32APSK (EN 302 307 DVB-S2)
Audio input format:
Analog: Two channels (one stereo pair) - mono, stereo
Digital SDI/HD-SDI with embedded audio or with AES/EBU audio input
Output frequency:
“L” band: 950 to 1750MHz in 10KHz steps (option: 1KHz steps)
Options: extended frequency range to 2700MHz; 70MHz (50 to 90 MHz)
Analog audio inputs:
0dBu (adjustable) / 600Ω balanced
Sampling frequency:
48KHz
L band local oscillator side band phase noise @10Hz offset: -65dBc/Hz @1KHz offset: -84dBc/Hz
(typical values):
@100KHz offset: -95dBc/Hz @1MHz offset: -118dBc/Hz
Bit rate and encoding standard:
Up to 384Kb/s - ISO / IEC11172-3 (MPEG-1 audio) layer 2 – compliant
Second audio pair option:
Stereo - up to 256Kb/s
Modulator card
AUDIO INPUTS AND ENCODING
OTHERS SPECIFICATIONS
Frequency reference clock:
Internal: 10MHz (stability +/- 5x10-7) available also for BUC reference
Option: high stability oven (1x10-8), external reference, GPS locked reference
Output level:
0dBm (Typ. adj. range: -30 to +5dBm - option: different output levels)
Output impedance and connector:
50 Ω “N” socket (option: 75 Ω)
Output stream type and system multiplexing
Transport Stream - ISO / IEC 13818-1 (MPEG2 TS) - PAT, PMT, NIT, SDT (LCN support)
Input Transport Stream Bit Rate:
Up to around 100 Mb/s according to settings (Modulation Scheme, Symbol Rate, etc.)
Pre-settings:
№8 Factory preset + №8 User configurable preset
Symbol Rate:
200KS/s to 30MS/s in 1KS/s steps - Transparent mode option (for SFN Streams)
Teletext / Closed Captioning data:
Extraction from analogue video input and insertion in the T.S.
Baseband Shaping (roll-off), forward error correc- According to the standard (EN 300 421 DVB-S; EN 301 210 DVB-DSNG; EN 302 307
tion (FEC) encoding and data scrambling:
DVB-S2 for Broadcast and DSNG applications)
MPEG-2 Encoder Card
VIDEO INPUTS AND ENCODING
Video input format:
Digital SD-SDI with embedded or separate AES - EBU audio;
Analog (Standard Definition only) composite PAL / SECAM / NTSC
Composite video input and filter:
1Vp-p / 75 Ω / BNC socket
Pre-processing:
TBC (Time Base Corrector) - Noise Reduction Filter
Encoding standard:
ISO / IEC 13818-2 MP@ML (MPEG-2 4:2:0)
Bit rate and supported resolutions:
Up to 15Mb/s - Full D1, 3/4 D1, 2/3 D1, 1/2 D1, SIF, QSIF
Slice Screen: up to 720 Horizontal pixel - up to 480/576 Vertical pixel (in steps of 32)
Picture encoding type / GOP Structure:
I, P, B / Flexible
Minimum latency:
Around 200mS - according to settings (GOP structure, bit rate etc.)
Encryption option:
BISS 1/E; PL (Physical Layer) scrambler with Gold Code insertion - DVB-S2 only)
Multistream option (DVB-S2 only):
Supported up to 6 T.S. inputs
Power supply:
85 to 264Vac 50/60 Hz (other on request)
Remote control interface options:
Ethernet 10/100 Base-T (SNMP, web server, e-mail client)
BUC power supply (option):
24V 1.9A
Housing and dimensions:
Rack drawer 19” 1U (depth 450mm - connectors and handles excluded)
Operating temperature range:
0 to 45° C.
General specifications
AUDIO INPUTS AND ENCODING
Audio input format:
Analog: mono, stereo, dual, joint stereo;
Digital: SDI (Serial Digital Interface) embedded audio or AES/EBU
Analog audio inputs:
0dBu (adjustable) / 600 Ω balanced
Sampling frequency:
32KHz, 44.1KHz, 48KHz
Bit rate and Encoding standard:
Up to 448Kb/s - ISO / IEC11172-3 (MPEG-1 audio) layer 1/2 - compliant
OTHER SPECIFICATIONS
Output stream type and system multiplexing
Transport stream - ISO / IEC 13818-1 (MPEG-2) - PAT, PMT, NIT, SDT (LCN support)
Pre-settings:
№8 Factory preset + №8 User configurable preset
Teletext / Closed Captioning data:
Extraction from analogue video input and insertion in the T.S.
Screenshot of MPEG-2 and MPEG-4
Encoder web page
www.abe.it
MPEG-4 (H.264/AVC) SD/HD Encoder Card
VIDEO INPUTS AND ENCODING
Multiplexer card (option)
Tables:
Add / modify (NIT, SDT, TDT, EIT)
Other functions:
PID filtering; MHP support
Video input format:
Digital SD/HD-SDI with embedded or separate AES - EBU audio;
Analog (Standard Definition only) composite PAL / SECAM / NTSC
Digital video input:
SDI / HD-SDI - 75Ω / BNC socket
Analog Composite video input:
1Vp-p / 75Ω / BNC socket
Standard, IP data rate, connector:
IEEE802.3a; 100/1000 Mbps with auto detect; RJ-45 with LEDs
Encoding standard:
ISO/IEC 14496-10 (H.264/AVC, 4:2:0) Main Profile Level 3.0 and High Profile Level 4.0
IP to T.S. delay, T.S. data rate:
1 to 120ms, over 100 Mbps
Bit rate:
From less than 2Mbit/s up to 24Mbit/s. Bit rate mode: CBR, VBR
T.S. over IP encapsulation, addressing mode:
UDP, SMPTE 2022-2 (RTP); Unicast and Multicast (IGMP v2)
Supported resolutions – downscaler:
1920 x 1080 x 60i/50i/24p, 1440 x 1080 x 60i/50i/24p, 1280 x 720 x 60p/50p/24p,
720 x 480 x 60i, 720 x 576 x 50i – Down scaler embedded
FEC:
As per Pro-MPEG Code of Practice #3 release 2 (SMPTE 2022-1); max. matrix size 100
T.S. packets per IP packet
1 to 7 (packet size: 188 or 204)
Ethernet input card (T.S. over IP)
Picture encoding type:
I, P, B
Minimum latency:
Around 500mS - according to settings (GOP structure, bit rate etc.)
Modulation scheme:
QPSK (EN300 421 DVB-S); QPSK, 8PSK, 16QAM (EN 301 210 DVB-DSNG);
QPSK, 8PSK, 16APSK, 32APSK (EN 302 307 DVB-S2)
Audio input format:
Analog: Two channels (one stereo pair) - mono, stereo
Digital SDI/HD-SDI with embedded audio or with AES/EBU audio input
Output frequency:
“L” band: 950 to 1750MHz in 10KHz steps (option: 1KHz steps)
Options: extended frequency range to 2700MHz; 70MHz (50 to 90 MHz)
Analog audio inputs:
0dBu (adjustable) / 600Ω balanced
Sampling frequency:
48KHz
L band local oscillator side band phase noise @10Hz offset: -65dBc/Hz @1KHz offset: -84dBc/Hz
(typical values):
@100KHz offset: -95dBc/Hz @1MHz offset: -118dBc/Hz
Bit rate and encoding standard:
Up to 384Kb/s - ISO / IEC11172-3 (MPEG-1 audio) layer 2 – compliant
Second audio pair option:
Stereo - up to 256Kb/s
Modulator card
AUDIO INPUTS AND ENCODING
OTHERS SPECIFICATIONS
Frequency reference clock:
Internal: 10MHz (stability +/- 5x10-7) available also for BUC reference
Option: high stability oven (1x10-8), external reference, GPS locked reference
Output level:
0dBm (Typ. adj. range: -30 to +5dBm - option: different output levels)
Output impedance and connector:
50 Ω “N” socket (option: 75 Ω)
Output stream type and system multiplexing
Transport Stream - ISO / IEC 13818-1 (MPEG2 TS) - PAT, PMT, NIT, SDT (LCN support)
Input Transport Stream Bit Rate:
Up to around 100 Mb/s according to settings (Modulation Scheme, Symbol Rate, etc.)
Pre-settings:
№8 Factory preset + №8 User configurable preset
Symbol Rate:
200KS/s to 30MS/s in 1KS/s steps - Transparent mode option (for SFN Streams)
Teletext / Closed Captioning data:
Extraction from analogue video input and insertion in the T.S.
Baseband Shaping (roll-off), forward error correc- According to the standard (EN 300 421 DVB-S; EN 301 210 DVB-DSNG; EN 302 307
tion (FEC) encoding and data scrambling:
DVB-S2 for Broadcast and DSNG applications)
MPEG-2 Encoder Card
VIDEO INPUTS AND ENCODING
Video input format:
Digital SD-SDI with embedded or separate AES - EBU audio;
Analog (Standard Definition only) composite PAL / SECAM / NTSC
Composite video input and filter:
1Vp-p / 75 Ω / BNC socket
Pre-processing:
TBC (Time Base Corrector) - Noise Reduction Filter
Encoding standard:
ISO / IEC 13818-2 MP@ML (MPEG-2 4:2:0)
Bit rate and supported resolutions:
Up to 15Mb/s - Full D1, 3/4 D1, 2/3 D1, 1/2 D1, SIF, QSIF
Slice Screen: up to 720 Horizontal pixel - up to 480/576 Vertical pixel (in steps of 32)
Picture encoding type / GOP Structure:
I, P, B / Flexible
Minimum latency:
Around 200mS - according to settings (GOP structure, bit rate etc.)
Encryption option:
BISS 1/E; PL (Physical Layer) scrambler with Gold Code insertion - DVB-S2 only)
Multistream option (DVB-S2 only):
Supported up to 6 T.S. inputs
Power supply:
85 to 264Vac 50/60 Hz (other on request)
Remote control interface options:
Ethernet 10/100 Base-T (SNMP, web server, e-mail client)
BUC power supply (option):
24V 1.9A
Housing and dimensions:
Rack drawer 19” 1U (depth 450mm - connectors and handles excluded)
Operating temperature range:
0 to 45° C.
General specifications
AUDIO INPUTS AND ENCODING
Audio input format:
Analog: mono, stereo, dual, joint stereo;
Digital: SDI (Serial Digital Interface) embedded audio or AES/EBU
Analog audio inputs:
0dBu (adjustable) / 600 Ω balanced
Sampling frequency:
32KHz, 44.1KHz, 48KHz
Bit rate and Encoding standard:
Up to 448Kb/s - ISO / IEC11172-3 (MPEG-1 audio) layer 1/2 - compliant
OTHER SPECIFICATIONS
Output stream type and system multiplexing
Transport stream - ISO / IEC 13818-1 (MPEG-2) - PAT, PMT, NIT, SDT (LCN support)
Pre-settings:
№8 Factory preset + №8 User configurable preset
Teletext / Closed Captioning data:
Extraction from analogue video input and insertion in the T.S.
Screenshot of MPEG-2 and MPEG-4
Encoder web page
www.abe.it
Series
DME
MPEG ENCODERS (SD/HD) + DVB-S/DSNG/S2 MODULATOR
DME series block diagram
FOR SATELLITE UPLINK & MW LINK APPLICATIONS
The high quality, professional and cost-effective solution
MPEG-2 or MPEG-4
Encoder # 2 (option)
MPEG-2 or MPEG-4
Encoder # 3 (option)
(option)
MPEG-2 or MPEG-4
Encoder # 1(option)
Video+Audio
digital
(SDI/AES-EBU)
and Analog
Inputs
BUC
Power supply
+24V
(option)
Transport Stream Input
interface (option)
MULTIPLEXER
Single/double ASI
and/or Ethernet (T.S. over IP)
BISS1/E
Encryption
(option)
DVB-S/S2
Modulator
DVB-S
DVB-DSNG
DVB-S2
“L” Band / 70MHz
IF output
Hi-stability
10MHz ref.
oscillator
(option)
MPEG-2 or MPEG-4
Encoder # 4 (option)
NOTE:
Without the multiplexer card option, the T.S. is generated with NIT and SDT tables.
With the multiplexer card option, are also added the TDT and EIT tables and on the optional transport
stream input is possible to have advanced remultiplexing functions such as PID filtering.
CREATE YOUR OWN EQUIPMENT CODE
Series suffix and number
multiplexer card
(0=no; 1=yes)
number of MPEG-4
(H.264) Encoder cards (*)
number of MPEG-2
Encoder cards (*)
DME 5
0 or 1
0 to 4
0 to 4
Examples:
“DME 5131” = DVB-S/S2 Modulator with multiplexer, №3 MPEG-4 and №1 MPEG-2 encoders
“DME 5012” = DVB-S/S2 Modulator without multiplexer, №1 MPEG-4 and №2 MPEG-2 encoders
“DME 5101” = DVB-S/S2 Modulator with multiplexer, no MPEG-4 and №1 MPEG-2 encoder
“DME 5000” = DVB-S/S2 Modulator with T.S. input (ASI or, optionally, Ethernet for T.S. over IP)
(*) Maximum number of MPEG-4 + MPEG-2 encoders is 4
AVAILABLE MAIN OPTIONS:










Up to №4 MPEG-2 or MPEG-4 (H.264 HD/SD) encoders
BUC power supply (24V 1.9A)
Hi stability 10MHz reference oscillator
Single/double ASI T.S. input
Multistream (up to 6 different T.S.)
Multiplexer card for advanced functions
70MHz output (instead of “L” Band)
Ethernet input (T.S. over IP)
BISS 1/ E encryption – PL scrambler with “Gold Code”
Second (stereo) audio channel (for MPEG4 encoder)
The “DME” is a high quality, professional, flexible and truly costeffective solution for digital satellite uplinks and terrestrial microwave links.
The unit consists of a high performance DVB-S/DSNG/S2
Multistandard modulator with up to four MPEG-2 and/or MPEG-4
(H.264/AVC SD/HD) Encoders in a single 1U rack chassis.
The DVB-S2 modulation supported complies with ETSI EN 302 307
(DVB-S2 standard) for BROADCAST and DSNG applications:
includes all modulation schemes (QPSK, 8PSK, 16APSK and
32APSK), all code rates (both mandatory and optional), CCM
(Constant Coding and Modulation), normal FEC frame, Dummy
frame Insertion, all roll-off factors and null packet deletion/insertion.
A key function of the modulator is the digital non-linear precorrection with the possibility to store and recall of several setups.
This function allows to correct the amplitude and phase vs. level
distortions introduced by the high power amplifiers (HPAs), so
increasing output power, MER and shoulders performances.
Features also include a 10MHz reference clock and the power
supply for the BUC (Block Up Converter).
The DME series, combined with a BUC and a parabolic antenna for
the chosen frequency range (usually Ku band - 14 to 14.5GHz - or
C band 5.85 to 6.43GHz), makes a complete satellite uplink solution.
Another application of the DME is as encoder/s - digital modulator
for agile terrestrial digital microwave links.
Applications:
 Digital satellite Uplinks for Distribution, Contribution, DSNG /
ENG Mobile news gathering;
 Digital Microwave Links (Mobile and STL);
Features:
 Up to 4 real time MPEG-2 (MP@ML – 4:2:0) and/or MPEG-4
(H.264/AVC SD/HD) video/dual audio Encoders;
 Second audio pair option;
 User configurable Encoders settings + easy to recall pre-defined
factory settings;
 Teletext of Closed Captioning extraction from video input and
reinsertion in the Transport Stream;
 Basic T.S. multiplexing functions embedded in MPEG-2 and
MPEG-4 encoders;
 DVB-S / DSNG / S2 Modulator having “L” band or 70MHz output
for Broadcast and DSNG applications;
 Multistream option, with the possibility of transmitting up to 6
different Transport Stream simultaneously;
 ASI and Ethernet (T.S. over IP) input interface options;
 User-friendly local control with front panel LCD display and keypad;
 Ethernet 10/100 Base-T (RJ45 connector - SNMP, web server,
e-mail client) remote control interface;
 Stand-Alone unit 1U high.
All specifications contained in this document may be changed without prior notice.
ABE ELETTRONICA
Via Leonardo da Vinci, 224 24043 Caravaggio (BG) Italy Tel. +39 0363 35 10 07 - Fax +39 0363 50 756 mail@abe.it - www.abe.it
www.abe.it
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising