Line array system LA8/LA8-SUB LA8-SUB touring +

Line array system LA8/LA8-SUB LA8-SUB touring +
LA-series
Line array system
touring + installation
LA8/LA8-SUB
Compact size, low weight
Dual 4” Neodymium Planar Wave Drivers (Patent Pending)
Twin 8” neodymium ultra low distortion woofers
The four drivers are physically time aligned
Variable horizontal coverage of 120° or 60°
Vertical Curving 0° - 12° variable in 1° steps
High efficiency
Integrated rigging system for flown
or ground-stacked arrays
System integration with LA8-SUB and Line-Core 8
The LA8 is a compact, two-way full range line array module,
designed for a wide range of venues where high fidelity sound
and outstanding intelligibility is required. The cabinet contains
two 8” neodymium ultra low distortion cone speakers and
two 4” HF neodymium planar wave drivers.
passive
The modules are designed to be used in multiples with a
minimal configuration of three. Up to 20 units can be arrayed
to achieve extreme high levels needed for larger venues.
The build in passive crossover allows multiple modules to be
driven with a single amplifier channel (up to 6 enclosures at
3 Ohm). Bi-amplification is possible as well and is internally
configurable. An optional LA8-SUB can be added for increased
low frequency response. The system can be driven with
external 19” amplifiers or using the Line-Core 8.
The integrated rigging system allows quick and easy flying
or ground stacking. Arrays may be build straight or curved
in various angular to obtain the desired vertical coverage.
The Coda EASE Focus simulation software allows calculating
the perfect curving setup for every application.
When coupled with LA8-SUB the LA8 line array gives audio
companies a flexible system for a wide range of applications
from the smallest venue to a concert-level sound.
Rigging possibilities:
LA8-SUB
Same as the Line-core 8 but without the amplifier. Primarily
designed for integration into an LA8 line array, the LA8-SUB
is also suited to general use subwoofer.
TECHNICAL SPECIFICATIONS:
Power handling RMS:
Nominal impedance:
Input connectors:
Dimensions:
Net weight:
36
1200 W
8 Ohm
2x Neutrick™ NL4MP
580 x 500 x 700 mm
36 kg
Applications:
Large Clubs
Convention Centers
Houses of Worship
Sport venues, Stadiums
Theatres, Musicals
Club Touring
Open Air, Festivals
Corporate events
System components:
LA8-SUB
Line-Core 8
PW418
DC26, C45
Accessoires:
Frame:
FR8
U-Bracket: CULA8
DC26
Digital Controller - see page 41 for further information.
TECHNICAL SPECIFICATIONS (single enclosure):
Type:
2-way full range line array module
Application:
Minimal 3, maximal 20 units line array
Frequency response:
70 Hz - 20kHz (- 3dB )
Power handling AES:
Low:
500 W
High:
160 W
Sensitivity Low:
99 dB
Max. SPL peak Low:
132 dB
Sensitivity High:
115 dB
Max. SPL peak High:
146 dB
Dispersion Horizontal:
120° or 60°
Vertical:
Array dependent, 0° - 12° in 1° steps
Components:
Low frequency:
2 x 8” neodymium woofers, carbon-fibre diaphragm
2” (51mm) voice coil, 250W (AES) each
High frequency:
2 x 4” neodymium planar wave drivers
1.75” (44.4mm) voice coil, 80W (AES) each
Crossover point:
1300 Hz Passive or bi-amp (internal connector)
Input connectors:
2 x Neutrick ™ NL4MP
Nominal impedance Passive: 16 Ohm (+2/-2)
2-way bi-amp operation:
LF: 16 Ohm (+1/-1) / HF: 16 Ohm (+2/-2)
Enclosure shape:
Horizontal trapezoid 2x6°
Enclosure material:
Baltic birch plywood
Finish:
Black textured paint
Flying Hardware:
Included
Dimensions:
580 x 220 x 320mm (incl. Hardware)
Net weight:
18.3 kg
System Performance:
Array
Horizontal
Coverage
1 Enclosure
120° or 60°
2 Enclosures
120° or 60°
4 Enclosures
120° or 60°
8 Enclosures
120° or 60°
Vertical
Coverage
–
0 - 12° adjustable
0 - 48° adjustable
0 - 96° adjustable
Maximum
Peak Output
132 dB
138 dB
144 dB
152 dB
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising