Easy HMI Pro Data Sheet

Easy HMI Pro Data Sheet
Easy HMI Pro Data Sheet
Easy HMI is a Microsoft Windows based graphical user interface to building automation and process
control devices.
Monitor and control all aspects of your system in real time using over 30 meters, gauges,
switches and buttons.
Easily change setpoints and schedules.
Collect and display historical data.
Collect and manage alarms.
Maintain a system log so you always know who changed what, and when it was changed.
Supported Devices:
BACnet (PTP and B/IP protocols)
ModBus (RTU and ASCII)
Virtually any other devices using third-party OPC Servers (Data Access 2.0)
Maintain a virtually unlimited number of sites.
Supported connection types:
BACnet PTP – RS-232 (direct connection or modem).
BACnet/IP – TCP/IP network.
ModBus – RS-232 (direct connection or modem) or RS-485
OPC – Connection type is determined by the third-party driver.
Sites may be grouped by region, customer, type of job or any other way you choose.
Supports multiple simultaneous connections.
Graphic Displays:
Supports a virtually unlimited number of displays for each site.
Displays may be grouped by floor, type or any other way you choose.
Displays may contain multiple color pictures or drawings.
Built-in library of over 4,000 graphic symbols (fans, pumps, ducts, etc.).
Most common Windows picture formats supported (Bmp, Jpg, Gif, etc.).
Each display may contain analog or digital meters, knobs, switches, etc. for system monitoring or
Link on-screen buttons to view other displays, historical data and schedules or to execute Visual
Basic Script commands.
If connected to multiple sites, points from all sites may be freely mixed on displays.
View several displays simultaneously.
Supports a virtually unlimited number of schedules for each site.
Use the built-in schedules for quick setup or customize a schedule to exactly fit your needs.
Histories (OPC Only):
Automatically collect and maintain historical data on all aspects of your system.
View historical data with a variety of 2D or 3D line and bar charts.
Chart appearance is fully customizable.
Automatically collects and stores historical data for up to 64 points. The OPC server does not
need to support the OPC Historical Data Access standard.
Activity Logging:
Most user activity may be optionally stored in a log file.
Log data is separated in to monthly files for easier searching or sorting.
Alarms (OPC Only):
Alarms are separated in to three categories: Alarm, Maintenance and Informational messages.
Alarms remain active until they are acknowledged at which time you may attach a comment to
the alarm (why it happened, what was done about it, etc.)
Alarms are stored in a master database for easy searching and acknowledging.
All alarms can be optionally emailed to a list of addresses or pagers.
Automatically monitors up to 64 points for custom alarm conditions. The OPC server does not
need to support the OPC Alarms and Events standard.
Supports a virtually unlimited number of users.
Each user may be customized to enable/disable access to most functions.
Individual users may log in and out of the software while maintaining all connections.
Drivers for each device type are independent Windows DCOM servers.
Drivers can be executed on remote computers over a network or the Internet, eliminating the
need for a serial connection to each computer running the software.
Multiple user connections to each driver are supported even with a single physical connection to
the devices.
Data requests from multiple users are synchronized and prioritized to minimize traffic between
the software and the devices.
Web Hosting:
A built-in web host allows virtually all graphic displays, schedules, alarms and historical data
charts to be viewed from any computer using Internet Explorer 5.5 or above.
No web server software or external programs are needed. The web host is 100% internal to the
Most of the meters, gauges, switches and other controls can be used in the web browser and
update in real-time, without page refreshes (requires downloading and installing a free set of
ActiveX controls).
No HTML programming or knowledge is required. All functions are immediately available in the
web browser. No special setup is needed beyond what would normally be done for a single user
The web host HTTP port is user-selectable.
Virtually every aspect of the software may be customized:
Main form background colors, gradients or picture.
Buttons can be added to toolbars.
Toolbars can be added or edited.
Toolbar icons can be rearranged or customized.
The main menu is fully customizable.
The name of the program can be changed so it appears to be a proprietary package.
The help files, tip-of-the-day text, program icon and splash screen may be customized.
System Requirements:
Any Windows 98/ME/2000/NT/XP based Pentium or compatible computer
64mb Memory (128mb recommended)
40mb hard disk drive
A mouse or compatible pointing device
Super VGA video card and monitor (at least 800x600 resolution recommended)
For Andover Infinity/Continuum panels, a terminal mode interface is required. The “command line”
interface is not required.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF