Octave signature
OCTAVE
Signature SERIES SPECIFICATIONS
OCTAVE SIGNATURE
BOOKSHELF
SUBWOOFER
Type
2-way freestanding loudspeaker
Construction
MDF polymer-coated cabinet with separate
chamber for each drive unit.
Acoustical Loading
Double port bass reflex
Drive Units
Woofer: 5¼"(130mm) rear-vented system.
Double ferrite magnet motor. One piece
integrated dome and surround cone, made
of damped polymer composite. 3" (75mm )
aluminum Hexatech™ voice coil and Morel's
external voice coil technology (EVC).
CENTRE
3 Way 4 units, full range centre speaker with low
magnetic stray field
Isobaric and port-loading reflex cabinet
MDF polymer-coated cabinet with 3 separate
acoustic chambers. Separate chamber for each
drive unit.
Double port bass reflex for bass chamber/sealed
for bass midrange & tweeter
Two 9" (222mm) flat-profile woofers with 3" (75
mm) Hexatech™ aluminum coil and rear-vented
Hybrid (neodymium and ferrite)
double magnet motor
Tweeter: Mid/high frequency unit, low
resonance soft dome, Acuflex™ coated, vented
double magnet neodymium motor. 11/8" (28mm)
Aluminum Hexatech™voice coil and Morel's
External Voice Coil technology (EVC).
All units are shielded with low magnetic stray field
Woofer: 2 x 5¼" (130mm) rear vented. Double
magnet motor.
Midrange: 1 x 5¼" (130mm) rear vented hybrid
motor. Both feature one piece integrated dome
and surround cone, made of damped polymer
composite. 3" (75 mm) aluminum Hexatech™ voice
coil using Morel's external voice coil technology
(EVC).
Tweeter: Mid/high frequency unit, low resonance
soft dome, Acuflex™ coated, vented double
magnet neodymium motor. 11/8" (28mm) aluminum
Hexatech™ and Morel’s External Voice Coil
technology (EVC).
All units are shielded with low magnetic stray field
Frequency Response
20-30,000Hz (40-18,000Hz ± 1.5 dB)
Crossover
2200 Hz / 12 dB octave
20-100Hz
20-22,000 Hz
Nominal Impedance
4 ohm
Nominal Impedance for full floorstanding system
Nominal Impedance for
bi-amp configuration system
Nominal Power Handling
120W RMS
300W RMS
Peak Power Handling
1,000W 10m/sec
1000W 10m/sec
Sensitivity 2.38V/1M
86 dB
88 dB
Dispersion
Dimension (WxHxD)
Within 1.5 dB - 18,000 Hz
Horizontal: over 60°
Vertical: over 20°
7" x 12½" x 12¾" (175mm x 315mm x 325 mm)
7" x 27" x 12¾" (175mm x 700mm x 325mm)
Within 1.5 dB - 18,000 Hz
Horizontal: over 60°
Vertical: over 20°
21¾" x 9¾" x 12¾" (550mm x 247mm x 325 mm)
Net Weight
15.4 lbs (7 kgs) each Octave unit
37.4 lbs (17 Kg)
36 lbs (16 Kg)
Finishe
Black, white,red
Black, white,red
Black, white,red
2200 Hz / 12 dB octave
4 ohm
4 ohm
4 ohm
2 ohm
* Morel operates a policy of continuous products design improvement, consequently specifications are subject to alteration without prior notice.
www.morelhifi.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising