AIR HANDLERS T-CLASS™ SPLIT SYSTEM UNITS

AIR HANDLERS T-CLASS™ SPLIT SYSTEM UNITS
AIR HANDLERS
TA
T-CLASS™ SPLIT SYSTEM UNITS
UPFLOW/HORIZONTAL - R-410A - 50 HZ
E N G I N E E R I N G D ATA
Bulletin No. 490133
December 2010
Supersedes August 2009
180-240 Models
072-090-120-150 Models
Nominal Capacity - 21.1 to 70 kW
Optional Electric Heat - 7.6 to 25.5 kW
MODEL NUMBER IDENTIFICATION
T A A 120 S 4 D - 1 M
Brand/Family
Voltage
M = 380/420V-3 phase-50hz
T = T-Class™ Product Line
Unit Type
A = Split System Air Handler
Major Design Sequence
A = 1st Generation
B = 2nd Generation
Minor Design Sequence
1 = 1st Revision
2 = 2nd Revision
3 = 3rd Revision
Nominal Cooling Capacity - kW
072 = 21.1 kW
090 = 26.4 kW
120 = 35.2 kW
150 = 44.0 kW
180 = 53 kW
240 = 70 kW
Cooling Efficiency
S = Standard Efficiency
Refrigerant Circuits
S = Single Circuit
D = Dual Circuits
Refrigerant Type
4 = R-410A
FEATURES AND BENEFITS
D
G
B
C
B
E
F
180-240 Models
072-090-120-150 Models
Contents
Blower Data...................................................................8
Dimensions..................................................................23
Features And Benefits...................................................2
Hot Water Coil Capacities............................................19
Model Number Identification..........................................1
Optional Electric Heat Data.........................................17
Options / Accessories ...................................................6
Specifications ...............................................................6
Specifications - Hot Water Coil....................................18
Unit Clearances...........................................................22
Weight Data ................................................................21
APPLICATIONS
Provides installation versatility and maximum efficiency
in cooling performance, air handling and filtering in
cooling or heat pump applications.
APPROVALS
Tested with matching air conditioner and heat pump
units in the Lennox Research Laboratory environmental
test room in accordance with test conditions included
in Air-Conditioning, Heating and Refrigeration Institute
(AHRI) Standard 340/360-2007 while operating at rated
voltage and air volumes.
Air handlers are shipped factory assembled ready
to install. Standard static blower drive is furnished
factory installed. Low or high static drive options are
available as factory installed options. See Blower Drive
Specifications Table for selections.
Blower data is from unit tests conducted in the Lennox
Laboratory air test chamber.
See heat pump bulletins in Heat Pump Outdoor Units
section for cooling and heating capacities and ratings.
Components bonded for grounding to meet safety
standards for servicing required by Underwriters
Laboratories (UL) and the International Electrotechnical
Commission (IEC).
International Organization for Standardization (ISO)
9001 Registered Manufacturing Quality System.
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 2
Convertible up-flow or horizontal design.
Equipped with single circuit (072) or dual-circuit (090240) indoor coils, suitable for application with Lennox 21
to 70 kW TSA air conditioners or 26 to 35 kW TPA heat
pump outdoor units.
Each refrigerant circuit has a dedicated expansion
valve.
090-240 models have a dual distribution system for two
stage capacity control during cooling cycles.
See air conditioners bulletins in Air Conditioners section
for cooling capacities and ratings.
FEATURES AND BENEFITS
REFRIGERANT SYSTEM
A Multi-Circuit, Copper Tube Coil
Extra large surface area of Lennox designed coil
provides maximum cooling efficiency, excellent heat
transfer and low air resistance.
Coils on 090-240 models are face split with separate
circuits, each circuit has its own expansion valve.
Precise circuiting gives uniform refrigerant distribution.
Lennox fabricated coil is constructed of precisely
spaced ripple edged aluminum fins fitted to durable
seamless, rifled copper tubes.
Rifled tubing provides enhanced heat transfer which
results in maximum coil performance when combined
with the Lennox fin design.
Fins are strengthened to resist bending and are
equipped with collars that grip tubing for maximum
contact area.
Flared tubing connections and silver soldering provide
tight, leakproof joints.
Long life copper tubing is corrosion-resistant and easy
to field service.
Coil is thoroughly factory tested under high pressure to
ensure leakproof construction.
B Expansion Valve
For use with R-410A systems.
Factory installed and piped.
Multi-circuit coils are equipped with
one thermal expansion valve per circuit.
Valves are sized for best performance.
090 and 120 models have internal check valves for use
with heat pump systems.
C Refrigerant Piping and Drain Connections
Refrigerant line inlets (knockouts) are provided on both
sides of the cabinet.
Refrigerant lines require sweat connections and are
made internal to the cabinet.
INDOOR AIR QUALITY
Filters
51 mm thick, throwaway fiberglass media filters are
furnished as standard.
Filter rack design permits quick and easy removal of
filters for servicing.
OPTIONS
Field Installed
Healthy Climate® High Efficiency Air Filters
Disposable MERV 10 or MERV 16 (Minimum Efficiency
Reporting Value based on ASHRAE 52.2) efficiency 5
inch pleated filters.
127 mm pleated filters offer longer filter life and better
filtration efficiency compared to standard 51 mm filters.
127 mm Filter Mounting Kits
Required for use with Healthy Climate MERV 10 or
MERV 16 filters. Kit includes filter rack for 127 mm
filters.
Healthy Climate® UVC Germicidal Light Kits
Healthy Climate® UVC light kits are specifically
designed for the TA air handlers and attach directly to
the indoor coil air shields without tools or fasteners at
the optimal distance and location required. The UVC
lights are sized to optimize the reduction of mold and
other bioaerosols (bacteria and viruses) on the coil
surface. In addition, the lights are equipped with unique
(patent pending) directional honeycomb shields to focus
the UVC light on the coil surface where it is needed
and reduce the exposure of light on other components
and access panels for improved safety and overall
effectiveness.
Enhanced rapid start ballast provides UVC lamp
operation at a full range of operating conditions.
LED’s on ballast show lamp operation status.
“Green” LED indicates power on”.
“Blue” LED indicates lamp operation.
Condensate drain outlet extends outside the cabinet for
ease of connection. Condensate drain can be relocated
to other side of cabinet and can be repositioned for
horizontal air flow applications.
Germicidal lamps emit ultra-violet (UVC) energy, which
has been proven to be effective in reducing microbes
such as viruses, bacteria, yeasts, and molds. This
process either destroys the organism or controls its
ability to reproduce.
OPTIONS
Lamps operate on 208/230V/1ph power supply.
Field Installed
Step-down transformer is available. Order separately.
Freezestat
Lamps may be operated from separate
200/220/230V-1ph power source.
Protects the evaporator coil from damaging ice buildup due to conditions such as low/no air flow, or low
refrigerant charge.
All necessary hardware for installation is furnished.
Heat Pump Check Valve Kit (180-240 Models Only)
Field installed kit contains valve assemblies that field
convert the coil to allow it to be matched with two
smaller heat pump outdoor units.
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 3
FEATURES AND BENEFITS
D BELT DRIVE BLOWERS
072-090-120-150 models are equipped with a single
blower wheel, 180 and 240 models have dual blower
wheels.
Centrifugal belt driven blowers deliver large air volumes
quietly and with low power consumption.
Blower wheels are heavy-duty, with forward curved
blades and double inlet.
Wheels are statically and dynamically balanced to
eliminate vibration and designed to give maximum air
delivery.
F CABINET
Cabinet is constructed of heavy-gauge, galvanized
steel.
Cabinet is completely lined with thick fiberglass
insulation resulting in quiet and efficient operation
due to the excellent sound deadening and insulating
qualities of fiberglass.
Supply and return air duct flanges are furnished for field
installation. See dimension drawings.
Service access is provided on three sides (072-150)
and four sides (180-240) of unit.
Bearings are heavy-duty, permanently sealed and
lubricated.
Large removable panels provide complete service
access on one side of unit.
Belt tension is automatically controlled by auto
tensioning device.
Electrical inlets are conveniently located in the cabinet.
See dimension drawings
Adjustable motor pulley allows speed adjustments.
Standard static drive is furnished factory installed. See
Blower Drive Specifications table for optional factory
installed low and high static drives available.
OPTIONS
Factory Installed
Low or High Static Drives
A choice of optional low or high static drives are
available for factory installation. See Blower Drive
Specifications table.
CONTROLS
E Control Box
Control box located in separate compartment in unit
cabinet.
Box may be relocated to alternate location for easier
access depending on application. See dimension
drawings.
Low voltage terminal strip factory installed.
Blower contactor furnished and factory installed in
control box.
All controls are pre-wired at the factory.
G Drain Pan
Deep, corrosion resistant plastic drain pan.
Reversible drain pan allows for drain outlets on either
end of cabinet and can be repositioned for horizontal air
flow applications.
Drain pan is removable from either side in both
horizontal and vertical applications.
OPTIONS
Factory Installed
Corrosion Protection
Polymeric epoxy coating that is deposited by electrical
transport (electrophoresis), using a process known
as electrocoat (e-coat). Available for enhanced coil
corrosion protection. Factory installed on the indoor coil.
Blower housing is painted when this option is ordered.
Field Installed
Float Switch
Prevents condensate overflow by turning the unit off
when the condensate level is abnormally high.
Return Air Grilles
Anodized aluminum grille field installs in return air
opening of air handler.
Return Air Grille Free Area
T2GARD30L-1 - 0.38 m2.
T2GARD30M-1 - 0.55 m2.
T2GARD30N-1 - 0.71 m2.
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 4
OPTIONS / ACCESSORIES
ELECTRIC HEAT SECTION
Furnished in a separate add-on matching cabinet.
Mounting hardware is furnished to secure cabinets
together.
Pre-punched mounting holes are furnished for aligning
electric heat section to air handler supply air flange.
Removable panel permits service access.
Electrical inlet provides wiring entry.
Field installed electric heaters are available in several
kW sizes, see Electric Heat Data table.
Helix wound, nichrome heating elements are exposed
directly in the air stream resulting in instant heat
transfer, lower coil temperatures and long service life.
ECONOMIZER DAMPER SECTION
Factory assembled and wired economizer dampers and
controls are available for field installation.
Heavy-gauge galvanized steel cabinet is completely
insulated with thick, matte-faced fiberglass insulation.
Large removable panels on both sides of cabinet
provide complete service access.
Mounting flanges provide ease of connection to air
handler unit.
Flanges on outdoor air opening and return air opening
permit easy duct connection.
Economizer has mechanically linked outdoor air and
recirculated air dampers.
Elements are accurately located and insulated from
the heavy-gauge steel support frame by high quality
insulators.
Formed dampers rotate smoothly in nylon bearings.
Elements are equipped with individual limit controls
providing positive protection in case of overheating.
Damper linkage and shafts are plated.
Sub-fusing, contactors, control relays, 24V transformer
are furnished.
Certain electric heat sizes may be two-stage controlled
(with field provided control) with each stage being
energized only when required. See Electric Heat Tables.
HOT WATER COIL
Furnished in a separate add-on matching cabinet.
Mounting hardware is furnished to secure cabinets
together.
Pre-punched mounting holes are furnished for aligning
cabinet to air handler.
Cabinet is constructed of heavy-gauge galvanized steel.
Outdoor air dampers are reinforced and gasketed for
tight seal and quiet operation.
The positioning of the dampers is accomplished by a
24V fully-modulating, electronic spring return damper
motor with adjustable minimum position potentiometer
and controlled by the room thermostat, adjustable mixed
air sensor and adjustable enthalpy control.
The enthalpy control allows 0 to 100% outdoor air to be
used for free cooling” when outdoor temperature and
humidity are acceptable.
Differential Enthalpy Control
An optional, return air enthalpy sensor can be ordered
extra for field installation. Allows the outdoor air
enthalpy control to select between outdoor air or return
air, whichever has lower enthalpy. Field installed in
economizer damper section.
Completely insulated with thick, foil-faced fiberglass
insulation.
Removable panel permits service access.
Cabinet is reversible to allow piping on either side of
unit.
Lennox designed and built coil has large face area,
excellent heat transfer and low air resistance.
Constructed of precisely spaced ripple-edged aluminum
fins fitted to durable copper tubes.
Fins are equipped with collars that grip tubing for
maximum contact area.
Flared shoulder tubing connections and silver soldering
provide tight, leakproof joints.
Long life copper tubing is easy to field service.
Coil is thoroughly factory tested under high pressure to
ensure leakproof construction.
Valves and pumps must be furnished by installer.
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 5
SPECIFICATIONS
General
Data
Model No.
Nominal kW
Connections
Liquid line o.d. - mm (in.) (sweat)
Suction/Vapor line o.d. - mm (in.) (sweat)
Condensate drain - in. (fpt)
Refrigerant
Not Furnished
Evaporator
Coil
Net face area - m2 (ft2)
Coil (Face) Split - 1st stage / 2nd stage (%)
Tube diameter - mm (in.)
TAA072S4S
TAA090S4D
TAA120S4D
21.0
26.4
35.2
(1) 16 (5/8)
(2) 16 (5/8)
(2) 16 (5/8)
(1) 28.5 (1-1/8)
(2) 22 (7/8)
(2) 22 (7/8)
1 (NPT)
1 (NPT)
1 (NPT)
R-410A
R-410A
R-410A
0.76 (8.2)
0.76 (8.2)
1.05 (11.3)
---
50 / 50
50 / 50
9.5 (3/8)
9.5 (3/8)
9.5 (3/8)
3
4
4
551 (14)
551 (14)
551 (14)
Number of rows
Fins per Meter (Fins per inch)
Blower and
Drive
See Blower Drive Specifications Table on page 14
Wheel nominal diameter & width - mm (in.)
Filter
Number and size - mm (in.)
(1) 381 x 381 (15 x 15)
(3) 406 x 635 x 51 (16 x 25 x 2)
(4) 406 x 635 x 51
(16 x 25 x 2)
SPECIFICATIONS
General
Data
Model No.
TAA150S4D
TAA180S4D
TAA240S4D
44.0
53
70
Nominal kW
Connections
Liquid line o.d. - mm (in.) (sweat)
(2) 16 (5/8)
(2) 16 (5/8)
(2) 16 (5/8)
Suction/Vapor line o.d. - mm (in.) (sweat)
(2) 22 (7/8)
(2) 28.5 (1-1/8)
(2) 28.5 (1-1/8)
1 (NPT)
1 (NPT)
1 (NPT)
Condensate drain - in. (fpt)
Refrigerant
Not Furnished
Evaporator
Coil
Net face area - m2 (ft2)
Coil (Face) Split - 1st stage / 2nd stage (%)
Tube diameter - mm (in.)
R-410A
R-410A
R-410A
1.05 (11.3)
1.57 (16.9)
1.57 (16.9)
50 / 50
50 / 50
50 / 50
9.5 (3/8)
9.5 (3/8)
9.5 (3/8)
4
3
4
551 (14)
551 (14)
551 (14)
Number of rows
Fins per Meter (Fins per inch)
Blower and
Drive
See Blower Drive Specifications Table on page 14
Wheel nominal diameter & width - mm (in.) (1) 381 x 381 (15 x 15)
Filter
Number and size - mm (in.)
(2) 381 x 381 (15 x 15)
(4) 406 x 635 x 51 (16 x 25 x 2)
OPTIONS / ACCESSORIES
Item
Catalog
No.
072
090
120
150
180
240
BLOWER
Blower Drives
See Blower Drive Specifications Table on page 14
CABINET
Corrosion Protection
Float Switch
Return Air Grille
Factory
O
O
O
O
O
O
T2SNSR71LN1-
47W40
X
X
X
X
X
X
T2GARD30L-1
47W49
X
X
T2GARD30M-1
47W50
X
X
T2GARD30N-1
47W51
X
X
NOTE - The catalog and model numbers that appear here are for ordering field installed accessories only.
O - Factory Installed with extended lead time.
X - Field Installed.
1
Corrosion protection option requires extended lead time.
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 6
OPTIONS / ACCESSORIES
Item
ELECTRIC HEAT
6.9 kW
10.4 kW
17.4 kW
24.3 kW
15.3 kW
23.0 kW
30.6 kW
38.3 kW
ECONOMIZER
Catalog
No.
072
090
120
150
380/420V-3ph - T3EH0010LM1G
380/420V-3ph - T3EH0015LM1G
380/420V-3ph - T3EH0025LM1G
380/420V-3ph - T3EH0035LM1G
380/420V-3ph - T3EH0020N-1G
380/420V-3ph - T3EH0030N-1G
380/420V-3ph - T3EH0040N-1G
380/420V-3ph - T3EH0050N-1G
46W55
46W56
46W57
46W58
46W69
46W70
46W40
46W71
X
X
X
X
x
X
X
X
X
X
X
X
X
X
X
T2ECON31L-1T2ECON31M-1T2ECON31N-1-
44W94
44W95
44W96
X
17W71
X
X
X
X
T2HWCL10LM1T2HWCL10N-1-
44W20
44W21
X
X
X
X
MERV 10 - HCF16-10
MERV 16 - HCF16-16
X6670
X6672
X
X
X
X
T2FLTR70L-1T2FLTR70M-1T2FLTR70N-13
208/230V - T2UVCL10LM1
3
208/230V - T2UVCL10N-1
Step-Down Transformer
47W71
47W72
47W73
46W43
46W44
96M07
X
X
T2SNSR70N1T2CVLV10N-1T2CVLV11N-1-
47W41
47W48
50W73
180
240
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
Economizer Controls
Differential Enthalpy Control
HOT WATER COIL
INDOOR AIR QUALITY
Air Filters
2
Healthy Climate®
High Efficiency Air Filters
406 x 635 x127 mm (16 x 25 x 5 in.)
127 mm Filter Mounting Kits
Healthy Climate®
UVC Light Kit
(208/230V-1ph)
REFRIGERANT SYSTEM
Freezestat
Heat Pump Check Valve Kit
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
NOTE - The catalog and model numbers that appear here are for ordering field installed accessories only.
X - Field Installed.
1
Nominal kW at 400V/3ph/50hz. Electric heat model numbers are based on nominal kW for US applications.
2
Order 127 mm (5 in.) Filter Mounting Kit and required number of MERV 10 or MERV 16 filters: - (3) 072-090, (4) 120-150.
3
Step-down transformer (380/420V to 190/210V-1ph) or separate power supply is required.
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 7
BLOWER DATA
TAA072 BLOWER PERFORMANCE
All data is measured external to the unit with dry coil and standard 51 mm (2 in.) air filters in place.
FOR ALL UNITS ADD:
1 - Wet indoor coil air resistance of selected unit.
2 - Any field installed accessories air resistance (electric heat, economizer, etc.) See page 15.
Then determine from table the blower motor hp and drive rpm required. See page 14 for blower drive specifications.
Air
Volume
STATIC PRESSURE EXTERNAL TO UNIT - Pa (Inches Water Gauge)
25 (0.1)
50 (0.2)
75 (0.3)
100 (0.4)
125 (0.5)
150 (0.6)
175 (0.7)
200 (0.8)
L/s CFM Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP
min
min
min
min
min
min
min
min
895 1900 428 0.43 0.57 479 0.49 0.66 531 0.55 0.74 581 0.60 0.81 629 0.66 0.88 675 0.70 0.94 718 0.75 1.01 758 0.80 1.07
945 2000 434 0.44 0.59 486 0.51 0.69 538 0.57 0.77 589 0.63 0.84 637 0.68 0.91 682 0.73 0.98 725 0.78 1.05 765 0.83 1.11
990 2100 441 0.46 0.62 493 0.54 0.72 545 0.60 0.80 596 0.66 0.88 644 0.71 0.95 689 0.76 1.02 732 0.81 1.09 771 0.86 1.15
1040 2200 448 0.48 0.65 501 0.56 0.75 553 0.62 0.83 604 0.68 0.91 652 0.73 0.98 696 0.79 1.06 738 0.84 1.13 778 0.90 1.20
1085 2300 456 0.51 0.68 508 0.58 0.78 561 0.64 0.86 612 0.70 0.94 659 0.76 1.02 704 0.82 1.10 746 0.87 1.17 785 0.93 1.24
1135 2400 463 0.53 0.71 516 0.60 0.81 569 0.67 0.90 620 0.73 0.98 667 0.79 1.06 711 0.85 1.14 753 0.91 1.22 792 0.96 1.29
1180 2500 470 0.55 0.74 524 0.63 0.84 578 0.70 0.94 629 0.76 1.02 675 0.82 1.10 719 0.89 1.19 760 0.95 1.27 798 1.00 1.34
1225 2600 478 0.57 0.77 533 0.66 0.88 587 0.73 0.98 637 0.79 1.06 683 0.86 1.15 726 0.93 1.24 767 0.98 1.32 805 1.04 1.39
1275 2700 486 0.60 0.81 542 0.69 0.92 596 0.76 1.02 646 0.83 1.11 692 0.90 1.20 734 0.96 1.29 775 1.02 1.37 812 1.08 1.45
1320 2800 495 0.63 0.85 552 0.72 0.96 606 0.80 1.07 655 0.87 1.16 700 0.93 1.25 742 1.00 1.34 782 1.06 1.42 819 1.12 1.50
1370 2900 504 0.66 0.89 561 0.75 1.01 616 0.83 1.11 665 0.90 1.20 708 0.97 1.30 750 1.04 1.39 789 1.10 1.48 826 1.16 1.56
1415 3000 514 0.69 0.93 572 0.78 1.05 626 0.87 1.16 674 0.94 1.26 717 1.01 1.35 758 1.08 1.45 797 1.15 1.54 833 1.21 1.62
Air
Volume
STATIC PRESSURE EXTERNAL TO UNIT - Pa (Inches Water Gauge)
225 (0.9)
250 (1.0)
275 (1.1)
300 (1.2)
325 (1.3)
350 (1.4)
375 (1.5)
L/s CFM Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP
min
min
min
min
min
min
min
895 1900 796 0.84 1.13 830 0.89 1.19 862 0.93 1.25 893 0.98 1.32 922 1.04 1.39 950 1.09 1.46 978 1.15 1.54
945 2000 802 0.87 1.17 836 0.92 1.23 868 0.97 1.30 898 1.02 1.37 928 1.07 1.44 956 1.13 1.52 983 1.19 1.60
990 2100 808 0.91 1.22 842 0.95 1.28 874 1.01 1.35 904 1.06 1.42 933 1.12 1.50 961 1.18 1.58 988 1.24 1.66
1040 2200 814 0.94 1.26 848 0.99 1.33 879 1.04 1.40 909 1.10 1.48 938 1.16 1.56 966 1.22 1.64 993 1.29 1.73
1085 2300 820 0.98 1.31 854 1.03 1.38 885 1.09 1.46 915 1.14 1.53 943 1.21 1.62 971 1.27 1.70 998 1.34 1.79
1135 2400 827 1.01 1.36 860 1.07 1.43 891 1.13 1.51 920 1.19 1.59 949 1.25 1.68 976 1.32 1.77 1003 1.39 1.86
1180 2500 833 1.05 1.41 866 1.11 1.49 897 1.17 1.57 926 1.24 1.66 954 1.31 1.75 981 1.37 1.84 1008 1.44 1.93
1225 2600 840 1.10 1.47 872 1.16 1.55 902 1.22 1.63 932 1.28 1.72 960 1.35 1.81 987 1.42 1.91 1013 1.50 2.01
1275 2700 846 1.14 1.53 878 1.20 1.61 908 1.27 1.70 937 1.34 1.79 965 1.40 1.88 992 1.48 1.98 1018 1.55 2.08
1320 2800 853 1.18 1.58 884 1.25 1.67 914 1.31 1.76 943 1.39 1.86 970 1.46 1.96 997 1.54 2.06 1023 1.61 2.16
1370 2900 859 1.23 1.65 890 1.30 1.74 920 1.37 1.83 948 1.44 1.93 975 1.51 2.03 1002 1.60 2.14 1028 1.67 2.24
1415 3000 866 1.28 1.71 896 1.34 1.80 926 1.42 1.90 954 1.49 2.00 981 1.57 2.11 1007 1.66 2.22 1032 1.74 2.33
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 8
BLOWER DATA
TAA090 BLOWER PERFORMANCE
All data is measured external to the unit with dry coil and standard 51 mm (2 in.) air filters in place.
FOR ALL UNITS ADD:
1 - Wet indoor coil air resistance of selected unit.
2 - Any field installed accessories air resistance (electric heat, economizer, etc.) See page 15.
Then determine from table the blower motor hp and drive rpm required. See page 14 for blower drive specifications.
Air
Volume
STATIC PRESSURE EXTERNAL TO UNIT - Pa (Inches Water Gauge)
25 (0.1)
50 (0.2)
75 (0.3)
100 (0.4)
125 (0.5)
150 (0.6)
175 (0.7)
200 (0.8)
L/s CFM Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP
min
min
min
min
min
min
min
min
1135 2400 508 0.59 0.79 565 0.66 0.89 619 0.73 0.98 667 0.79 1.06 710 0.85 1.14 750 0.92 1.23 787 0.97 1.30 822 1.03 1.38
1180 2500 519 0.62 0.83 577 0.70 0.94 630 0.76 1.02 677 0.82 1.10 720 0.89 1.19 759 0.95 1.28 796 1.01 1.36 830 1.07 1.43
1225 2600 531 0.65 0.87 588 0.73 0.98 641 0.80 1.07 688 0.87 1.16 729 0.93 1.25 769 1.00 1.34 805 1.06 1.42 839 1.11 1.49
1275 2700 543 0.69 0.92 600 0.77 1.03 653 0.84 1.12 698 0.90 1.21 739 0.98 1.31 778 1.04 1.40 814 1.10 1.48 848 1.16 1.55
1320 2800 555 0.72 0.97 613 0.81 1.08 664 0.87 1.17 709 0.95 1.27 749 1.02 1.37 788 1.09 1.46 824 1.15 1.54 857 1.21 1.62
1370 2900 568 0.76 1.02 625 0.84 1.13 676 0.91 1.22 719 0.98 1.32 759 1.07 1.43 797 1.13 1.52 833 1.19 1.60 866 1.25 1.68
1415 3000 581 0.80 1.07 638 0.88 1.18 687 0.95 1.28 730 1.04 1.39 769 1.11 1.49 807 1.18 1.58 842 1.25 1.67 875 1.31 1.75
1465 3100 595 0.84 1.12 651 0.93 1.24 699 1.00 1.34 740 1.08 1.45 779 1.16 1.56 817 1.23 1.65 852 1.29 1.73 883 1.36 1.82
1510 3200 609 0.88 1.18 664 0.97 1.30 710 1.05 1.41 751 1.13 1.52 789 1.22 1.63 827 1.28 1.72 861 1.34 1.80 892 1.41 1.89
1555 3300 624 0.93 1.24 677 1.01 1.36 722 1.10 1.48 761 1.19 1.59 799 1.27 1.70 836 1.34 1.79 870 1.40 1.88 901 1.47 1.97
1605 3400 639 0.97 1.30 690 1.07 1.43 733 1.16 1.55 772 1.25 1.67 810 1.32 1.77 846 1.39 1.86 879 1.45 1.95 909 1.53 2.05
1650 3500 653 1.02 1.37 703 1.12 1.50 745 1.21 1.62 782 1.31 1.75 820 1.38 1.85 856 1.45 1.94 888 1.51 2.03 917 1.60 2.14
1700 3600 668 1.07 1.44 715 1.17 1.57 756 1.27 1.70 793 1.37 1.83 830 1.44 1.93 865 1.51 2.02 897 1.58 2.12 925 1.67 2.24
Air
Volume
STATIC PRESSURE EXTERNAL TO UNIT - Pa (Inches Water Gauge)
225 (0.9)
250 (1.0)
275 (1.1)
300 (1.2)
325 (1.3)
350 (1.4)
375 (1.5)
L/s CFM Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP
min
min
min
min
min
min
min
1135 2400 855 1.07 1.44 888 1.13 1.51 920 1.19 1.59 950 1.25 1.67 979 1.32 1.77 1006 1.39 1.86 1033 1.46 1.96
1180 2500 863 1.12 1.50 896 1.17 1.57 928 1.23 1.65 958 1.30 1.74 986 1.37 1.84 1013 1.45 1.94 1039 1.52 2.04
1225 2600 872 1.16 1.56 904 1.22 1.64 936 1.28 1.72 965 1.36 1.82 993 1.43 1.92 1019 1.51 2.02 1045 1.58 2.12
1275 2700 880 1.21 1.62 913 1.27 1.70 943 1.34 1.79 972 1.41 1.89 1000 1.49 2.00 1026 1.57 2.10 1052 1.64 2.20
1320 2800 889 1.26 1.69 921 1.32 1.77 951 1.40 1.87 979 1.47 1.97 1006 1.55 2.08 1033 1.63 2.18 1058 1.71 2.29
1370 2900 898 1.31 1.76 929 1.38 1.85 959 1.45 1.95 987 1.53 2.05 1013 1.61 2.16 1039 1.69 2.26 1064 1.77 2.37
1415 3000 906 1.37 1.83 937 1.44 1.93 966 1.51 2.03 994 1.59 2.13 1020 1.67 2.24 1046 1.75 2.35 1070 1.84 2.46
1465 3100 914 1.42 1.91 944 1.50 2.01 973 1.57 2.11 1001 1.66 2.22 1027 1.74 2.33 1052 1.82 2.44 1077 1.90 2.55
1510 3200 922 1.48 1.99 952 1.56 2.09 980 1.64 2.20 1008 1.72 2.30 1033 1.80 2.41 1058 1.89 2.53 1083 1.97 2.64
1555 3300 930 1.54 2.07 959 1.63 2.18 987 1.71 2.29 1014 1.78 2.39 1040 1.87 2.50 1065 1.95 2.62 1089 2.04 2.73
1605 3400 938 1.61 2.16 966 1.69 2.27 994 1.78 2.38 1021 1.86 2.49 1046 1.94 2.60 1071 2.02 2.71 1095 2.11 2.83
1650 3500 945 1.69 2.26 973 1.77 2.37 1001 1.85 2.48 1028 1.92 2.58 1053 2.01 2.69 1077 2.10 2.81 1101 2.19 2.93
1700 3600 953 1.75 2.35 980 1.84 2.47 1008 1.92 2.58 1034 2.00 2.68 1059 2.08 2.79 1084 2.17 2.91 1107 2.26 3.03
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 9
BLOWER DATA
TAA120 BLOWER PERFORMANCE
All data is measured external to the unit with dry coil and standard 51 mm (2 in.) air filters in place.
FOR ALL UNITS ADD:
1 - Wet indoor coil air resistance of selected unit.
2 - Any field installed accessories air resistance (electric heat, economizer, etc.) See page 15.
Then determine from table the blower motor hp and drive rpm required. See page 14 for blower drive specifications.
Air
Volume
STATIC PRESSURE EXTERNAL TO UNIT - Pa (Inches Water Gauge)
25 (0.1)
50 (0.2)
75 (0.3)
100 (0.4)
125 (0.5)
150 (0.6)
175 (0.7)
200 (0.8)
L/s CFM Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP
min
min
min
min
min
min
min
min
1415 3000 484 0.38 0.51 516 0.45 0.60 552 0.52 0.70 591 0.61 0.82 635 0.71 0.95 677 0.80 1.07 699 0.82 1.10 736 0.88 1.18
1510 3200 499 0.46 0.62 531 0.52 0.70 566 0.60 0.80 606 0.69 0.92 651 0.79 1.06 684 0.86 1.15 707 0.88 1.18 746 0.95 1.28
1605 3400 514 0.54 0.73 546 0.60 0.81 582 0.68 0.91 622 0.77 1.03 667 0.87 1.17 690 0.91 1.22 717 0.96 1.29 758 1.04 1.40
1700 3600 529 0.63 0.84 562 0.69 0.93 598 0.77 1.03 639 0.86 1.15 679 0.95 1.28 697 0.98 1.31 730 1.04 1.40 772 1.13 1.52
1795 3800 545 0.72 0.96 579 0.78 1.05 616 0.86 1.15 658 0.95 1.28 686 1.02 1.37 706 1.05 1.41 745 1.14 1.53 786 1.23 1.65
1890 4000 562 0.81 1.09 596 0.88 1.18 634 0.96 1.29 674 1.05 1.41 693 1.09 1.46 720 1.15 1.54 761 1.25 1.67 802 1.34 1.79
1980 4200 580 0.92 1.23 615 0.98 1.31 654 1.06 1.42 684 1.13 1.52 702 1.17 1.57 737 1.26 1.69 778 1.36 1.82 819 1.45 1.94
2075 4400 600 1.02 1.37 635 1.08 1.45 672 1.16 1.56 691 1.21 1.62 717 1.28 1.72 756 1.39 1.86 796 1.48 1.98 836 1.56 2.09
2170 4600 619 1.13 1.51 655 1.19 1.59 683 1.25 1.68 702 1.31 1.76 736 1.41 1.89 775 1.51 2.02 814 1.59 2.13 853 1.67 2.24
2265 4800 639 1.23 1.65 673 1.29 1.73 692 1.35 1.81 719 1.44 1.93 757 1.55 2.08 795 1.63 2.19 832 1.72 2.30 871 1.79 2.40
2360 5000 659 1.33 1.78 685 1.40 1.87 706 1.47 1.97 740 1.58 2.12 778 1.69 2.26 814 1.77 2.37 851 1.84 2.46 889 1.91 2.56
Air
Volume
STATIC PRESSURE EXTERNAL TO UNIT - Pa (Inches Water Gauge)
225 (0.9)
250 (1.0)
275 (1.1)
300 (1.2)
325 (1.3)
350 (1.4)
375 (1.5)
L/s CFM Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP
min
min
min
min
min
min
min
1415 3000 779 0.96 1.29 826 1.06 1.42 873 1.16 1.56 919 1.27 1.70 964 1.37 1.84 1009 1.48 1.98 1054 1.57 2.11
1510 3200 790 1.04 1.40 836 1.14 1.53 882 1.24 1.66 929 1.34 1.80 974 1.45 1.94 1019 1.54 2.07 1063 1.65 2.21
1605 3400 802 1.13 1.51 847 1.22 1.64 893 1.32 1.77 938 1.42 1.91 983 1.52 2.04 1028 1.62 2.17 1072 1.72 2.31
1700 3600 815 1.22 1.64 859 1.31 1.76 904 1.41 1.89 949 1.51 2.03 993 1.61 2.16 1037 1.71 2.29 1080 1.81 2.42
1795 3800 829 1.32 1.77 873 1.42 1.90 917 1.51 2.03 961 1.61 2.16 1005 1.71 2.29 1048 1.81 2.42 1090 1.90 2.55
1890 4000 845 1.42 1.91 888 1.52 2.04 932 1.62 2.17 975 1.72 2.31 1018 1.81 2.43 1060 1.91 2.56 1102 2.01 2.69
1980 4200 861 1.54 2.06 904 1.63 2.19 948 1.73 2.32 990 1.84 2.46 1033 1.93 2.59 1074 2.02 2.71 1116 2.12 2.84
2075 4400 878 1.65 2.21 921 1.75 2.34 963 1.84 2.47 1006 1.94 2.60 1048 2.04 2.73 1089 2.13 2.86 1130 2.22 2.98
2170 4600 894 1.76 2.36 936 1.86 2.49 979 1.95 2.61 1021 2.04 2.74 1063 2.14 2.87 1104 2.24 3.00 1145 2.33 3.12
2265 4800 911 1.87 2.51 953 1.96 2.63 995 2.06 2.76 1036 2.15 2.88 1078 2.25 3.01 1119 2.33 3.13 1161 2.43 3.26
2360 5000 928 1.99 2.67 969 2.07 2.78 1011 2.16 2.90 1052 2.26 3.03 1094 2.35 3.15 1135 2.44 3.27 1176 2.54 3.40
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 10
BLOWER DATA
TAA150 BLOWER PERFORMANCE
All data is measured external to the unit with dry coil and standard 51 mm (2 in.) air filters in place.
FOR ALL UNITS ADD:
1 - Wet indoor coil air resistance of selected unit.
2 - Any field installed accessories air resistance (electric heat, economizer, etc.) See page 15.
Then determine from table the blower motor hp and drive rpm required. See page 14 for blower drive specifications.
Air
Volume
STATIC PRESSURE EXTERNAL TO UNIT - Pa (Inches Water Gauge)
25 (0.1)
50 (0.2)
75 (0.3)
100 (0.4)
125 (0.5)
150 (0.6)
175 (0.7)
200 (0.8)
L/s CFM Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP
min
min
min
min
min
min
min
min
1890 4000 627 0.94 1.26 669 1.04 1.39 690 1.08 1.45 714 1.13 1.52 754 1.23 1.65 795 1.31 1.76 835 1.40 1.87 877 1.48 1.98
1980 4200 653 1.06 1.42 684 1.13 1.52 701 1.17 1.57 736 1.26 1.69 777 1.36 1.82 816 1.43 1.92 856 1.51 2.02 897 1.59 2.13
2075 4400 676 1.17 1.57 694 1.22 1.63 721 1.29 1.73 761 1.40 1.87 800 1.48 1.99 838 1.55 2.08 877 1.63 2.18 917 1.70 2.28
2170 4600 688 1.27 1.70 710 1.34 1.79 747 1.44 1.93 787 1.54 2.06 823 1.61 2.16 860 1.67 2.24 898 1.74 2.33 938 1.81 2.43
2265 4800 702 1.38 1.85 735 1.48 1.99 774 1.60 2.14 812 1.68 2.25 846 1.73 2.32 882 1.79 2.40 920 1.86 2.49 959 1.92 2.58
2360 5000 725 1.54 2.06 763 1.65 2.21 801 1.75 2.34 837 1.82 2.44 869 1.86 2.49 903 1.90 2.55 941 1.97 2.64 979 2.04 2.73
2455 5200 754 1.72 2.30 791 1.81 2.43 828 1.90 2.55 862 1.96 2.63 891 1.98 2.66 925 2.02 2.71 962 2.08 2.79 1000 2.15 2.88
2550 5400 783 1.89 2.53 819 1.98 2.65 855 2.05 2.75 887 2.10 2.82 913 2.10 2.82 946 2.13 2.86 983 2.20 2.95 1021 2.26 3.03
2645 5600 810 2.04 2.74 845 2.13 2.85 881 2.20 2.95 912 2.25 3.01 935 2.22 2.98 967 2.25 3.01 1004 2.31 3.10 1041 2.38 3.19
2735 5800 835 2.20 2.95 871 2.28 3.05 906 2.35 3.15 936 2.38 3.19 957 2.34 3.14 987 2.36 3.16 1024 2.42 3.25 1062 2.49 3.34
2830 6000 860 2.34 3.14 896 2.42 3.25 931 2.50 3.35 960 2.51 3.37 978 2.46 3.30 1008 2.47 3.31 1045 2.54 3.40 1083 2.60 3.48
Air
Volume
STATIC PRESSURE EXTERNAL TO UNIT - Pa (Inches Water Gauge)
225 (0.9)
250 (1.0)
275 (1.1)
300 (1.2)
325 (1.3)
350 (1.4)
375 (1.5)
L/s CFM Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP
min
min
min
min
min
min
min
1890 4000 920 1.57 2.10 963 1.66 2.22 1006 1.75 2.34 1048 1.84 2.46 1091 1.92 2.58 1133 2.01 2.69 1174 2.10 2.81
1980 4200 939 1.67 2.24 982 1.76 2.36 1024 1.85 2.48 1067 1.93 2.59 1109 2.02 2.71 1151 2.11 2.83 1193 2.20 2.95
2075 4400 959 1.78 2.39 1001 1.87 2.50 1043 1.95 2.61 1085 2.04 2.73 1127 2.13 2.85 1169 2.21 2.96 1211 2.30 3.08
2170 4600 979 1.89 2.53 1020 1.97 2.64 1062 2.06 2.76 1104 2.14 2.87 1146 2.23 2.99 1188 2.31 3.10 1230 2.40 3.22
2265 4800 999 2.00 2.68 1040 2.08 2.79 1082 2.16 2.90 1123 2.25 3.01 1165 2.33 3.12 1207 2.42 3.24 1248 2.50 3.35
2360 5000 1019 2.11 2.83 1060 2.19 2.93 1101 2.27 3.04 1142 2.35 3.15 1184 2.43 3.26 1226 2.52 3.38 1267 2.60 3.49
2455 5200 1040 2.22 2.98 1080 2.30 3.08 1121 2.38 3.19 1162 2.45 3.29 1203 2.54 3.41 1245 2.63 3.52 1286 2.71 3.63
2550 5400 1060 2.33 3.13 1100 2.41 3.23 1140 2.48 3.33 1181 2.57 3.44 1222 2.65 3.55 1264 2.73 3.66 1305 2.81 3.77
2645 5600 1080 2.45 3.28 1120 2.51 3.37 1160 2.60 3.48 1201 2.67 3.58 1242 2.75 3.69 1283 2.83 3.80 1324 2.92 3.91
2735 5800 1101 2.56 3.43 1140 2.63 3.52 1180 2.70 3.62 1220 2.78 3.72 1261 2.86 3.83 1302 2.94 3.94 1343 3.02 4.05
2830 6000 1121 2.66 3.57 1160 2.74 3.67 1200 2.81 3.77 1240 2.89 3.87 1280 2.96 3.97 1321 3.04 4.08 1362 3.13 4.19
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 11
BLOWER DATA
TAA180 BLOWER PERFORMANCE
All data is measured external to the unit with dry coil and standard 51 mm (2 in.) air filters in place.
FOR ALL UNITS ADD:
1 - Wet indoor coil air resistance of selected unit.
2 - Any field installed accessories air resistance (electric heat, economizer, etc.) See page 16.
Then determine from table the blower motor hp and drive rpm required. See page 14 for blower drive specifications.
Air
Volume
STATIC PRESSURE EXTERNAL TO UNIT - Pa (Inches Water Gauge)
25 (0.1)
50 (0.2)
75 (0.3)
100 (0.4)
125 (0.5)
150 (0.6)
175 (0.7)
200 (0.8)
L/s CFM Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP
min
min
min
min
min
min
min
min
2265 4800 440 0.58 0.78 486 0.87 1.16 534 1.09 1.46 582 1.27 1.7 628 1.42 1.9 670 1.54 2.07 709 1.63 2.18 744 1.67 2.24
2360 5000 446 0.66 0.88 492 0.93 1.25 540 1.15 1.54 588 1.32 1.77 634 1.47 1.97 676 1.60 2.14 714 1.69 2.26 748 1.75 2.34
2455 5200 452 0.73 0.98 499 1.00 1.34 547 1.21 1.62 595 1.37 1.84 640 1.52 2.04 682 1.66 2.22 719 1.75 2.34 753 1.81 2.43
2550 5400 458 0.81 1.08 505 1.07 1.43 554 1.27 1.7 602 1.43 1.92 647 1.58 2.12 688 1.72 2.3 724 1.82 2.44 757 1.89 2.54
2645 5600 465 0.88 1.18 512 1.13 1.52 561 1.32 1.77 609 1.48 1.99 653 1.64 2.2 694 1.78 2.39 729 1.89 2.53 762 1.98 2.65
2735 5800 471 0.95 1.28 519 1.20 1.61 568 1.38 1.85 616 1.54 2.07 660 1.70 2.28 700 1.85 2.48 734 1.97 2.64 766 2.07 2.77
2830 6000 478 1.03 1.38 526 1.27 1.7 575 1.44 1.93 623 1.60 2.15 667 1.77 2.37 706 1.92 2.58 740 2.06 2.76 771 2.17 2.91
2925 6200 485 1.10 1.48 534 1.34 1.79 583 1.50 2.01 630 1.66 2.23 674 1.84 2.46 712 2.01 2.69 745 2.15 2.88 776 2.28 3.05
3020 6400 493 1.19 1.59 542 1.40 1.88 591 1.57 2.1 638 1.73 2.32 681 1.91 2.56 718 2.10 2.81 750 2.25 3.01 780 2.39 3.2
3115 6600 500 1.26 1.69 550 1.46 1.96 599 1.63 2.18 646 1.80 2.41 688 1.99 2.67 724 2.19 2.93 755 2.36 3.16 785 2.51 3.36
3210 6800 508 1.34 1.79 558 1.53 2.05 607 1.69 2.27 654 1.87 2.51 695 2.07 2.78 730 2.29 3.07 761 2.48 3.32 789 2.64 3.54
3305 7000 516 1.41 1.89 567 1.60 2.15 616 1.76 2.36 662 1.95 2.61 702 2.17 2.91 736 2.40 3.22 766 2.60 3.49 794 2.78 3.73
3400 7200 525 1.48 1.99 575 1.67 2.24 625 1.84 2.46 670 2.04 2.73 709 2.28 3.05 742 2.52 3.38 771 2.75 3.68 798 2.94 3.94
Air
Volume
STATIC PRESSURE EXTERNAL TO UNIT - Pa (Inches Water Gauge)
225 (0.9)
250 (1.0)
275 (1.1)
300 (1.2)
325 (1.3)
350 (1.4)
375 (1.5)
L/s CFM Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP
min
min
min
min
min
min
min
2265 4800 778 1.74 2.33 811 1.84 2.47 844 2.01 2.69 876 2.19 2.94 907 2.37 3.18 936 2.52 3.38 966 2.67 3.58
2360 5000 782 1.81 2.43 814 1.93 2.59 847 2.10 2.81 879 2.29 3.07 909 2.48 3.32 939 2.63 3.53 968 2.80 3.75
2455 5200 786 1.89 2.54 818 2.02 2.71 850 2.20 2.95 881 2.40 3.22 912 2.60 3.48 941 2.76 3.7
970 2.93 3.93
2550 5400 790 1.98 2.66 821 2.13 2.85 853 2.31 3.09 884 2.51 3.37 914 2.72 3.64 943 2.89 3.88 972 3.07 4.12
2645 5600 794 2.08 2.79 825 2.23 2.99 856 2.42 3.24 887 2.64 3.54 917 2.85 3.82 946 3.04 4.07 975 3.23 4.33
2735 5800 798 2.19 2.93 828 2.34 3.14 859 2.54 3.41 890 2.77 3.71 919 2.99 4.01 948 3.19 4.28 977 3.40 4.56
2830 6000 801 2.29 3.07 832 2.46 3.3
862 2.67 3.58 892 2.91 3.9
922 3.15 4.22 951 3.36 4.51 980 3.59 4.81
2925 6200 805 2.41 3.23 835 2.59 3.47 865 2.81 3.77 895 3.07 4.11 924 3.31 4.44 953 3.54 4.75 983 3.78 5.07
3020 6400 809 2.54 3.4
839 2.72 3.65 868 2.96 3.97 898 3.22 4.32 927 3.49 4.68 956 3.74 5.01 986 3.99 5.35
3115 6600 813 2.67 3.58 842 2.87 3.85 872 3.12 4.18 901 3.40 4.56 930 3.68 4.93 959 3.94 5.28 989 4.21 5.65
3210 6800 817 2.81 3.77 846 3.03 4.06 875 3.29 4.41 904 3.58 4.8
933 3.88 5.2
962 4.16 5.58 993 4.45 5.97
3305 7000 821 2.97 3.98 849 3.20 4.29 878 3.48 4.66 907 3.78 5.07 936 4.10 5.49 965 4.39 5.89 996 4.71 6.31
3400 7200 825 3.14 4.21 853 3.38 4.53 881 3.67 4.92 910 3.99 5.35 939 4.32 5.79 969 4.64 6.22 1000 4.98 6.67
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 12
BLOWER DATA
TAA240 BLOWER PERFORMANCE
All data is measured external to the unit with dry coil and standard 51 mm (2 in.) air filters in place.
FOR ALL UNITS ADD:
1 - Wet indoor coil air resistance of selected unit.
2 - Any field installed accessories air resistance (electric heat, economizer, etc.) See page 16.
Then determine from table the blower motor hp and drive rpm required. See page 14 for blower drive specifications.
Air
Volume
STATIC PRESSURE EXTERNAL TO UNIT - Pa (Inches Water Gauge)
25 (0.1)
50 (0.2)
75 (0.3)
100 (0.4)
125 (0.5)
150 (0.6)
175 (0.7)
200 (0.8)
L/s CFM Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP
min
min
min
min
min
min
min
min
3020 6400 535 1.37 1.84 583 1.54 2.06 630 1.70 2.28 674 1.87 2.51 713 2.07 2.77 746 2.26 3.03 776 2.42 3.25 805 2.57 3.44
3115 6600 545 1.45 1.94 593 1.61 2.16 640 1.78 2.38 683 1.96 2.63 720 2.17 2.91 753 2.38 3.19 782 2.56 3.43 810 2.72 3.64
3210 6800 555 1.53 2.05 604 1.69 2.27 650 1.87 2.5 692 2.06 2.76 728 2.28 3.06 759 2.51 3.36 787 2.70 3.62 815 2.87 3.85
3305 7000 566 1.61 2.16 614 1.78 2.38 660 1.95 2.62 701 2.16 2.9 736 2.41 3.23 766 2.65 3.55 793 2.86 3.83 820 3.04 4.08
3400 7200 577 1.69 2.27 625 1.86 2.49 671 2.05 2.75 710 2.28 3.05 743 2.54 3.4 772 2.80 3.75 799 3.02 4.05 825 3.22 4.32
3490 7400 588 1.78 2.38 637 1.95 2.61 681 2.15 2.88 719 2.39 3.21 751 2.68 3.59 778 2.95 3.96 804 3.20 4.29 829 3.42 4.58
3585 7600 600 1.86 2.49 648 2.04 2.74 691 2.26 3.03 727 2.53 3.39 758 2.83 3.79 784 3.12 4.18 809 3.39 4.54 834 3.62 4.85
3680 7800 613 1.95 2.61 660 2.15 2.88 701 2.38 3.19 735 2.66 3.57 764 2.98 4.0 790 3.30 4.42 814 3.58 4.8 839 3.83 5.14
3775 8000 626 2.04 2.73 671 2.25 3.02 711 2.51 3.36 743 2.81 3.77 771 3.15 4.22 796 3.48 4.67 819 3.79 5.08 844 4.07 5.45
3870 8200 638 2.13 2.86 682 2.37 3.18 720 2.65 3.55 751 2.97 3.98 777 3.33 4.46 801 3.68 4.93 824 4.01 5.37 849 4.30 5.77
3965 8400 651 2.24 3
694 2.50 3.35 729 2.80 3.75 758 3.14 4.21 784 3.51 4.7 807 3.89 5.21 829 4.24 5.68 853 4.57 6.12
4060 8600 664 2.35 3.15 704 2.63 3.53 738 2.95 3.96 765 3.31 4.44 789 3.71 4.97 812 4.10 5.5 834 4.48 6.0 858 4.83 6.48
4155 8800 676 2.48 3.32 714 2.78 3.73 746 3.13 4.19 772 3.51 4.7 795 3.92 5.25 817 4.33 5.81 839 4.74 6.35 863 5.12 6.86
4245 9000 688 2.61 3.5 724 2.94 3.94 754 3.30 4.43 778 3.71 4.97 800 4.13 5.54 822 4.57 6.13 844 5.01 6.71 868 5.42 7.27
4340 9200 700 2.77 3.71 733 3.11 4.17 761 3.50 4.69 784 3.92 5.26 806 4.37 5.86 826 4.83 6.48 848 5.29 7.09 873 5.74 7.69
4435 9400 711 2.93 3.93 742 3.30 4.43 768 3.71 4.97 790 4.16 5.57 811 4.62 6.19 831 5.11 6.85 853 5.60 7.5 878 6.08 8.15
4530 9600 721 3.11 4.17 750 3.51 4.71 775 3.94 5.28 796 4.40 5.9 816 4.89 6.56 836 5.41 7.25 858 5.92 7.94 884 6.44 8.63
Air
Volume
STATIC PRESSURE EXTERNAL TO UNIT - Pa (Inches Water Gauge)
225 (0.9)
250 (1.0)
275 (1.1)
300 (1.2)
325 (1.3)
350 (1.4)
375 (1.5)
L/s CFM Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP Rev/ kW BHP
min
min
min
min
min
min
min
3020 6400 833 2.73 3.66 863 2.92 3.92 892 3.16 4.24 922 3.42 4.59 952 3.68 4.93 981 3.94 5.28 1012 4.21 5.65
3115 6600 838 2.89 3.87 867 3.10 4.15 896 3.35 4.49 926 3.63 4.86 956 3.89 5.22 986 4.18 5.6 1017 4.47 5.99
3210 6800 842 3.05 4.09 871 3.27 4.39 900 3.54 4.75 930 3.83 5.14 960 4.13 5.54 991 4.43 5.94 1022 4.74 6.36
3305 7000 847 3.24 4.34 875 3.47 4.65 905 3.75 5.03 934 4.07 5.45 964 4.38 5.87 996 4.70 6.3 1028 5.04 6.75
3400 7200 851 3.43 4.6
880 3.69 4.94 909 3.98 5.34 939 4.31 5.78 969 4.64 6.22 1001 4.98 6.68 1034 5.34 7.16
3490 7400 856 3.64 4.88 884 3.91 5.24 913 4.22 5.66 943 4.57 6.13 974 4.92 6.6 1006 5.29 7.09 1040 5.67 7.6
3585 7600 861 3.86 5.18 888 4.15 5.56 918 4.48 6.01 948 4.85 6.5
980 5.23 7.01 1012 5.62 7.53 1047 6.02 8.07
3680 7800 865 4.10 5.49 893 4.40 5.9
985 5.55 7.44 1019 5.96 7.99 1054 6.39 8.56
923 4.76 6.38 953 5.15 6.9
3775 8000 870 4.35 5.83 898 4.68 6.27 928 5.05 6.77 959 5.46 7.32 991 5.89 7.89 1026 6.33 8.48 1062 6.77 9.08
3870 8200 875 4.62 6.19 903 4.96 6.65 933 5.36 7.19 964 5.80 7.77 998 6.24 8.37 1033 6.71 9.00 1070 7.18 9.63
3965 8400 879 4.89 6.56 908 5.27 7.07 938 5.69 7.63 970 6.15 8.25 1004 6.63 8.89 1040 7.12 9.54 1078 7.61 10.2
4060 8600 884 5.19 6.96 913 5.60 7.5
944 6.04 8.1
4155 8800 890 5.51 7.39 919 5.94 7.96 950 6.42 8.6
977 6.53 8.75 1011 7.03 9.43 1048 7.55 10.12 1087 8.06 10.81
983 6.93 9.29 1019 7.46
10 1057 8.00 10.73 1096 8.53 11.44
4245 9000 895 5.84 7.83 924 6.30 8.45 956 6.81 9.13 991 7.35 9.85 1027 7.91 10.6 1066 8.47 11.36 1105 9.03 12.11
4340 9200 900 6.20 8.31 931 6.69 8.97 963 7.23 9.69 998 7.80 10.45 1036 8.39 11.24 1075 8.97 12.03 1115 9.55 12.8
4435 9400 906 6.57 8.81 937 7.09 9.51 970 7.67 10.28 1006 8.27 11.08 1045 8.88 11.91 1085 9.50 12.73 1125 10.0913.52
4530 9600 912 6.97 9.34 944 7.53 10.09 978 8.13 10.9 1015 8.77 11.75 1054 9.41 12.61 1095 10.0413.46 1136 10.6514.28
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 13
BLOWER DATA
BLOWER DRIVE SPECIFICATIONS
Static
Low
Standard
High
Low
Standard
High
Low
Standard
High
Low
Standard
High
Low
Standard
High
Low
Standard
High
REV/MIN
Range
541 - 735
704 - 911
889 - 1083
616 - 798
773 - 967
953 - 1160
657 - 851
812 - 1005
996 - 1212
785 - 955
953 - 1160
1125 - 1342
616 - 798
773 - 967
953 - 1160
679 - 863
843 - 1078
1078 - 1274
Motor kW
Nominal
Maximum
1.5
1.7
1.5
1.7
1.5
1.7
1.5
1.7
1.5
1.7
2.2
2.6
1.5
1.7
1.5
1.7
2.2
2.6
2.2
2.6
2.2
2.6
3.5
4.3
2.2
2.6
3.5
4.3
3.5
4.0
3.5
4.0
5.6
6.4
5.6
6.4
Motor HP
Nominal
Maximum
2
2.3
2
2.3
2
2.3
2
2.3
2
2.3
3
3.45
2
2.3
2
2.3
3
3.45
3
3.45
3
3.45
5
5.75
3
3.45
5
5.75
5
5.75
5
5.75
7.5
8.62
7.5
8.62
072
090
120
150
180
240
O
S
O
-------------------------------
------O
S
O
-------------------------
------------O
S
O
-------------------
------------------O
S
O
-------------
------------------------O
S
O
-------
------------------------------O
S
O
NOTE - Using total air volume and system static pressure requirements, determine from blower performance tables Rev/min and motor horsepower required. Maximum
usable horsepower of motors furnished by Lennox are shown. If motors of comparable horsepower are used, be sure to keep within the service factor limitations outlined on the motor nameplate.
S - Factory installed standard
O - Factory Installed with extended lead time.
BLOWER MOTOR ELECTRICAL DATA
090
120
150
180
240
1.5 kW (2 HP)
Blower Motor
Maximum Overcurrent Protection
/ Minimum Circuit Ampacity
380/420V-50hz-3ph 15 / 5
Model No.
15 / 5
15 / 5
---
---
---
2.2 kW (3 HP)
Blower Motor
Maximum Overcurrent Protection
/ Minimum Circuit Ampacity
380/420V-50hz-3ph
---
15 / 7
15 / 7
15 / 7
15 / 7
---
3.5 kW (5 HP)
Blower Motor
Maximum Overcurrent Protection
/ Minimum Circuit Ampacity
380/420V-50hz-3ph
---
---
---
15 / 10 15 / 10 15 / 10
5.6 kW (7.5 HP) Maximum Overcurrent Protection
Blower Motor
/ Minimum Circuit Ampacity
380/420V-50hz-3ph
---
---
---
15 / 10 15 / 10 20 / 14
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 14
072
BLOWER DATA
TAA072-090 ACCESSORY AIR RESISTANCE
Total Resistance
Air Volume
Wet Coil
072
127 mm Filters
090
MERV 10
Electric
Heat
Economizer
MERV 16
Hot Water
Coil
L/s
cfm
Pa
in. w.g.
Pa
in. w.g.
Pa
in. w.g.
Pa
in. w.g.
Pa
in. w.g.
Pa
in. w.g.
Pa
in. w.g.
895
1900
17
0.07
22
0.09
7
0.03
10
0.04
10
0.04
5
0.02
30
0.12
945
2000
17
0.07
25
0.10
7
0.03
10
0.04
10
0.04
5
0.02
32
0.13
990
2100
20
0.08
27
0.11
7
0.03
10
0.04
10
0.04
5
0.02
35
0.14
1040
2200
20
0.08
27
0.11
7
0.03
12
0.05
12
0.05
5
0.02
37
0.15
1085
2300
22
0.09
30
0.12
7
0.03
12
0.05
12
0.05
7
0.03
40
0.16
1135
2400
25
0.10
32
0.13
10
0.04
15
0.06
12
0.05
7
0.03
42
0.17
1180
2500
25
0.10
35
0.14
10
0.04
15
0.06
15
0.06
7
0.03
45
0.18
1225
2600
27
0.11
37
0.15
10
0.04
15
0.06
15
0.06
7
0.03
47
0.19
1275
2700
30
0.12
40
0.16
12
0.05
15
0.06
17
0.07
10
0.04
50
0.20
1320
2800
30
0.12
42
0.17
12
0.05
15
0.06
17
0.07
10
0.04
52
0.21
1370
2900
32
0.13
45
0.18
12
0.05
17
0.07
20
0.08
10
0.04
57
0.23
1415
3000
35
0.14
47
0.19
12
0.05
17
0.07
20
0.08
12
0.05
60
0.24
1465
3100
35
0.14
50
0.20
15
0.06
17
0.07
22
0.09
12
0.05
62
0.25
1510
3200
37
0.15
52
0.21
15
0.06
17
0.07
22
0.09
12
0.05
67
0.27
1555
3300
40
0.16
55
0.22
15
0.06
20
0.08
25
0.10
15
0.06
70
0.28
1605
3400
42
0.17
57
0.23
15
0.06
20
0.08
25
0.10
15
0.06
72
0.29
1650
3500
45
0.18
60
0.24
17
0.07
20
0.08
27
0.11
15
0.06
77
0.31
1700
3600
45
0.18
62
0.25
17
0.07
20
0.08
30
0.12
15
0.06
80
0.32
TAA120-150 ACCESSORY AIR RESISTANCE
Total Resistance
Air Volume
Wet Coil
120
127 mm Filters
150
MERV 10
Economizer
MERV 16
Electric
Heat
Hot Water
Coil
L/s
cfm
Pa
in. w.g.
Pa
in. w.g.
Pa
in. w.g.
Pa
in. w.g.
Pa
in. w.g.
Pa
in. w.g.
Pa
in. w.g.
1415
3000
27
0.11
27
0.11
7
0.03
12
0.05
10
0.04
12
0.05
60
0.24
1510
3200
30
0.12
30
0.12
10
0.04
12
0.05
10
0.04
12
0.05
67
0.27
1605
3400
35
0.14
35
0.14
10
0.04
15
0.06
12
0.05
15
0.06
72
0.29
1700
3600
37
0.15
37
0.15
12
0.05
15
0.06
12
0.05
15
0.06
80
0.32
1795
3800
40
0.16
40
0.16
12
0.05
17
0.07
12
0.05
15
0.06
87
0.35
1890
4000
45
0.18
45
0.18
15
0.06
17
0.07
15
0.06
20
0.08
94
0.38
1980
4200
47
0.19
47
0.19
15
0.06
17
0.07
15
0.06
20
0.08
102
0.41
2075
4400
50
0.20
50
0.20
15
0.06
20
0.08
17
0.07
22
0.09
109
0.44
2170
4600
55
0.22
55
0.22
17
0.07
20
0.08
17
0.07
22
0.09
117
0.47
2265
4800
57
0.23
57
0.23
17
0.07
20
0.08
20
0.08
25
0.10
127
0.51
2360
5000
62
0.25
62
0.25
17
0.07
20
0.08
20
0.08
25
0.10
134
0.54
2455
5200
67
0.27
67
0.27
20
0.08
22
0.09
22
0.09
27
0.11
144
0.58
2550
5400
70
0.28
70
0.28
20
0.08
22
0.09
22
0.09
27
0.11
152
0.61
2645
5600
75
0.30
75
0.30
20
0.08
22
0.09
25
0.10
32
0.13
162
0.65
2735
5800
80
0.32
80
0.32
22
0.09
25
0.10
25
0.10
32
0.13
172
0.69
2830
6000
82
0.33
82
0.33
22
0.09
25
0.10
27
0.11
35
0.14
179
0.72
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 15
BLOWER DATA
TAA180-240 ACCESSORY AIR RESISTANCE
Total Resistance
Air Volume
Wet Coil
080
127 mm Filters
240
MERV 10
MERV 16
Economizer
Electric
Heat
Hot Water
Coil
L/s
cfm
Pa
in. w.g.
Pa
in. w.g.
Pa
in. w.g.
Pa
in. w.g.
Pa
in. w.g.
Pa
in. w.g.
Pa
in. w.g.
2125
4500
20
0.08
27
0.11
7
0.03
12
0.05
12
0.05
15
0.06
60
0.24
2240
4750
22
0.09
30
0.12
10
0.04
12
0.05
15
0.06
20
0.08
65
0.26
2360
5000
25
0.10
32
0.13
10
0.04
15
0.06
17
0.07
22
0.09
70
0.28
2475
5250
27
0.11
35
0.14
10
0.04
15
0.06
17
0.07
22
0.09
77
0.31
2595
5500
27
0.11
37
0.15
12
0.05
15
0.06
20
0.08
27
0.11
82
0.33
2715
5750
30
0.12
40
0.16
12
0.05
15
0.06
20
0.08
27
0.11
87
0.35
2830
6000
32
0.13
45
0.18
12
0.05
17
0.07
25
0.10
30
0.12
94
0.38
2950
6250
35
0.14
47
0.19
15
0.06
17
0.07
27
0.11
35
0.14
99
0.40
3065
6500
37
0.15
50
0.20
15
0.06
17
0.07
27
0.11
35
0.14
107
0.43
3185
6750
40
0.16
52
0.21
15
0.06
20
0.08
30
0.12
37
0.15
114
0.46
3305
7000
42
0.17
55
0.22
17
0.07
20
0.08
30
0.12
37
0.15
119
0.48
3420
7250
45
0.18
60
0.24
17
0.07
20
0.08
32
0.13
42
0.17
127
0.51
3540
7500
47
0.19
62
0.25
17
0.07
20
0.08
32
0.13
42
0.17
134
0.54
3655
7750
47
0.19
65
0.26
20
0.08
22
0.09
35
0.14
45
0.18
142
0.57
3775
8000
52
0.21
70
0.28
20
0.08
22
0.09
40
0.16
50
0.20
149
0.60
3895
8250
55
0.22
72
0.29
20
0.08
22
0.09
40
0.16
50
0.20
157
0.63
4010
8500
57
0.23
77
0.31
22
0.09
25
0.1
42
0.17
52
0.21
164
0.66
4130
8750
60
0.24
80
0.32
22
0.09
25
0.1
42
0.17
52
0.21
172
0.69
4245
9000
62
0.25
82
0.33
22
0.09
25
0.1
45
0.18
57
0.23
179
0.72
4365
9250
65
0.26
87
0.35
25
0.10
27
0.11
47
0.19
60
0.24
189
0.76
4485
9500
67
0.27
90
0.36
25
0.10
27
0.11
50
0.20
65
0.26
196
0.79
4600
9750
70
0.28
94
0.38
25
0.10
27
0.11
55
0.22
67
0.27
204
0.82
4720
10 000
72
0.29
99
0.40
27
0.11
30
0.12
57
0.23
72
0.29
214
0.86
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 16
OPTIONAL ELECTRIC HEAT DATA
1
Electric No.
Volts kW
Heat
of
Input Input
Size
Steps
7.6 kW
11.5 kW
19.1 kW
25.5 kW
1
1
1
1
380
400
420
380
400
420
380
400
420
380
400
420
6.3
6.9
7.6
9.4
10.5
11.5
15.7
17.3
19.1
20.9
23.1
25.5
Btuh
Output
2
21 400
23 400
26 000
32 100
35 700
39 300
53 500
59 200
65 200
71 300
79 000
87 100
072-090
TAA072
Total Unit + Electric Heat
3
4
Minimum
Maximum
Circuit
Overcurrent
Ampacity
Protection
1.5 kW
1.5 kW
(2 hp)
(2 hp)
TAA090
Total Unit + Electric Heat
3
4
Minimum
Maximum
Circuit
Overcurrent
Ampacity
Protection
1.1 kW
1.5 kW
1.1 kW
1.5 kW
(1.5 hp)
(2 hp)
(1.5 hp)
(2 hp)
18
20
18
20
20
20
25
25
25
26
25
30
38
40
38
40
40
40
---
---
49
51
50
60
OPTIONAL ELECTRIC HEAT DATA
1
Electric No.
Volts kW
Heat
of
Input Input
Size
Steps
7.6 kW
11.5 kW
19.1 kW
25.5 kW
1
1
1
1
380
400
420
380
400
420
380
400
420
380
400
420
6.3
6.9
7.6
9.4
10.5
11.5
15.7
17.3
19.1
20.9
23.1
25.5
2
Btuh
Output
21 400
23 400
26 000
32 100
35 700
39 300
53 500
59 200
65 200
71 300
79 000
87 100
120-150
TAA120
Total Unit + Electric Heat
3
4
Minimum
Maximum
Circuit
Overcurrent
Ampacity
Protection
1.5 kW 2.2 kW
1.5 kW
2.2 kW
(2 hp)
(3 hp)
(2 hp)
(3 hp)
TAA150
Total Unit + Electric Heat
3
4
Minimum
Maximum
Circuit
Overcurrent
Ampacity
Protection
2.2 kW 3.7 kW
2.2 kW
3.7 kW
(3 hp)
(5 hp)
(3 hp)
(5 hp)
18
20
20
20
20
23
20
25
25
26
25
30
26
30
30
30
35
40
40
40
40
43
40
45
49
51
50
60
51
54
60
60
OPTIONAL ELECTRIC HEAT DATA
1
Electric No.
Volts kW
Heat
of
Input Input
Size
Steps
15.3 kW
23.0 kW
30.6 kW
38.3 kW
1
1
1
1
380
400
420
380
400
420
380
400
420
380
400
420
12.5
13.9
15.3
18.8
20.9
23.0
25.1
27.8
30.6
31.3
34.7
38.3
Btuh
Output
2
42 700
47 300
52 300
64 300
71 200
78 500
85 600
94 900
104 500
107 000
118 500
130 800
180-240
TAA180
Total Unit + Electric Heat
3
4
Minimum
Maximum
Circuit
Overcurrent
Ampacity
Protection
1.5 kW 2.2 kW
1.5 kW
2.2 kW
(2 hp)
(3 hp)
(2 hp)
(3 hp)
TAA240
Total Unit + Electric Heat
3
4
Minimum
Maximum
Circuit
Overcurrent
Ampacity
Protection
2.2 kW 3.7 kW
2.2 kW
3.7 kW
(3 hp)
(5 hp)
(3 hp)
(5 hp)
33
36
35
40
36
41
40
45
46
50
50
50
50
55
50
60
58
61
60
70
61
66
70
70
72
76
80
80
76
81
80
90
Nominal kW based on 400V/3ph/50hz.
Electric heater capacity only - does not include additional blower motor heat capacity.
3
Refer to local codes to determine wire, fuse and disconnect size requirements. Use wires suitable for at least 75°C (167°F).
4
Heating, Air Conditioning, Refrigeration type breaker or fuse.
1
2
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 17
SPECIFICATIONS - HOT WATER COIL
General Data
Hot Water Coil Model No.
T2HWCL10LM1-
T2HWCL10N-1-
TAA072
TAA180
TAA090
TAA240
Air Handler Model No.
TAA120
TAA150
Water Line
Connections
Inlet o.d. - mm (in.) (sweat)
35 (1-3/8)
35 (1-3/8)
Outlet o.d. - mm (in.) (sweat)
35 (1-3/8)
35 (1-3/8)
Net face area - m (sq. ft.)
0.56 (6.00)
0.84 (9.00)
Hot Water
2
Coil
Tube diameter - mm (in.)
9.5 (3/8)
9.5 (3/8)
Fins per mm (inch)
551 (14)
551 (14)
HOT WATER COIL - WATER PRESSURE DROP
Flow Rate (L/min)
Model No.
8
15
23
30
38
45
53
61
68
76
83
91
98
106
114
121
129
136
Water Pressure Drop (kPa)
TAA072
TAA090
TAA120
0.06 0.30 0.60 0.99 1.46 2.00 2.60 3.29 4.04 4.84 5.71 6.67 7.68 8.73 9.86 11.06 12.28 13.60
TAA150
TAA180
TAA240
0.09 0.45 0.90 1.49 2.18 2.99 3.89 4.93 6.04 7.26 8.58 9.98 11.51 13.09 14.80 16.59 18.44 20.41
Flow Rate (L/min)
Model No.
144
151
159
167
174
182
189
197
204
212
220
227
235
242
250
257
265
Water Pressure Drop (kPa)
TAA072
TAA090
TAA120
14.97 16.38 17.87 19.40 20.98 22.63 24.33 26.09 27.89 29.77 31.68 33.66 35.66 37.75 39.87 42.06 44.30
TAA150
TAA180
TAA240
22.45 24.57 26.81 29.11 31.47 33.96 36.50 39.13 41.85 44.66 47.53 50.48 53.50 56.61 59.81 63.07 66.42
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 18
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 19
2830
2360
1890
2265
1890
1510
1700
1415
1135
1360
1135
L/M
72.5
60.8
49.3
84.8
71.2
57.6
96.1
80.6
65.2
84.8
71.2
57.6
98.8
82.8
67.0
111.3
93.3
75.4
103.1
86.4
69.9
119.1
99.9
80.6
133.4
111.8
90.3
119.1
99.9
80.6
136.7
114.6
92.5
152.5
127.8
103.1
LAT = Leaving Air Temperature
150
120
090
072
905
4
15
27
4
15
27
4
15
27
4
15
27
4
15
27
4
15
27
4
15
27
4
15
27
4
15
27
4
15
27
4
15
27
4
15
27
Entering
Model Airflow
Air Temp
No.
(L/s)
(°C)
11
kW
54.7
45.9
37.2
64.1
53.8
43.5
72.6
60.9
49.3
64.1
53.8
43.5
74.6
62.5
50.6
84.1
70.5
57.0
77.9
65.3
52.8
90.0
75.4
60.9
100.8
84.4
68.2
90.0
75.4
60.9
103.3
86.6
69.9
115.2
96.5
77.9
LAT
54.1
57.5
61.0
50.9
54.9
58.8
48.3
52.6
56.9
50.9
54.9
58.8
47.7
52.1
56.5
45.1
49.9
54.7
46.8
51.4
55.9
43.6
48.6
53.6
41.0
46.4
51.8
43.6
48.6
53.6
40.4
45.9
51.4
37.9
43.8
49.6
80
17
L/M kW LAT
45.7 51.9 51.5
38.0 43.1 55.0
30.3 34.4 58.3
53.4 60.6 48.4
44.3 50.3 52.3
35.2 40.0 56.2
60.3 68.5 45.8
50.0 56.8 50.1
39.7 45.2 54.4
53.4 60.6 48.4
44.3 50.3 52.3
35.2 40.0 56.2
61.9 70.3 45.2
51.4 58.4 49.7
40.8 46.4 54.0
69.7 79.1 42.7
57.7 65.6 47.5
45.8 52.1 52.2
64.6 73.3 44.3
53.6 60.8 48.9
42.5 48.3 53.3
74.5 84.6 41.2
61.7 70.1 46.3
48.9 55.6 51.2
83.3 94.6 38.7
69.0 78.3 44.2
54.7 62.0 49.5
74.5 84.6 41.2
61.7 70.1 46.3
48.9 55.6 51.2
85.4 96.9 38.2
70.7 80.2 43.7
56.0 63.5 49.2
95.1 107.9 35.7
78.6 89.2 41.6
62.2 70.6 47.5
HOT WATER COIL CAPACITIES
22
L/M kW LAT L/M
32.3 48.9 48.8 84.8
26.5 40.1 52.2 73.0
20.7 31.3 55.5 61.3
38.5 56.9 46.1 99.3
30.8 46.5 49.7 85.5
24.0 36.3 53.4 71.8
42.4 64.2 43.3 112.5
34.6 52.6 47.6 96.9
26.9 40.8 51.7 81.3
38.5 56.9 46.1 99.3
30.8 46.5 49.7 85.5
24.0 36.3 53.4 71.8
43.5 66.0 42.7 115.7
35.5 53.9 47.1 99.6
27.6 41.9 51.4 83.5
48.9 74.1 40.3 130.5
39.9 60.5 45.0 112.3
30.9 46.9 49.7 94.2
45.3 68.8 41.9 120.8
37.1 56.2 46.4 104.0
28.8 43.6 50.8 87.2
52.1 79.1 38.8 139.6
42.5 64.5 43.9 120.1
33.0 50.0 48.8 100.8
58.2 88.3 36.5 156.6
47.5 72.0 41.9 134.7
36.7 55.7 47.2 112.9
52.1 79.1 38.8 139.6
42.5 64.5 43.9 120.1
33.0 50.0 48.8 100.8
59.6 90.4 35.9 160.6
48.6 73.7 41.4 138.1
37.6 57.0 46.8 115.8
66.2 100.5 33.6 179.1
53.9 81.8 39.5 154.0
41.6 63.2 45.3 129.1
Entering Water Temperature (°C)
95
Water Temperature Drop (°C)
11
17
22
kW LAT L/M kW LAT L/M kW
63.5 62.0 54.0 60.8 59.5 38.5 57.9
54.7 65.5 46.1 52.0 63.0 32.6 49.1
45.9 69.0 38.3 43.2 66.5 26.8 40.3
74.4 58.4 64.0 70.7 56.1 47.9 70.7
64.1 62.4 53.9 60.7 59.9 38.8 57.0
53.8 66.3 44.8 50.4 63.8 31.2 46.9
84.3 55.4 71.4 80.4 53.0 50.7 76.3
72.6 59.8 60.9 68.6 57.4 42.9 64.6
60.9 64.1 50.6 57.0 61.7 35.1 52.9
74.4 58.4 64.0 70.7 56.1 47.9 70.7
64.1 62.4 53.9 60.7 59.9 38.8 57.0
53.8 66.3 44.8 50.4 63.8 31.2 3.0
86.7 54.7 73.3 82.6 52.4 52.0 78.4
74.6 59.2 62.6 70.5 56.8 44.1 66.3
62.6 63.6 52.0 58.5 61.2 36.1 54.3
97.8 51.7 82.5 93.0 49.4 58.6 88.1
84.2 56.6 70.4 79.4 54.2 49.5 74.5
70.6 61.4 58.4 65.8 59.0 40.5 60.9
90.5 53.7 76.5 86.1 51.3 54.3 81.7
77.9 58.3 65.3 73.6 55.9 46.0 69.1
65.4 62.8 54.2 61.1 60.4 37.6 56.6
104.7 50.0 88.3 99.5 47.7 62.5 94.1
90.0 55.1 75.3 84.8 52.8 52.8 79.5
75.5 60.1 62.5 70.3 57.8 43.2 65.0
117.4 47.0 98.8 111.3 44.8 69.9 105.2
100.9 52.4 84.3 94.9 50.3 59.1 88.8
84.6 57.8 69.8 78.6 55.7 48.2 72.6
104.7 50.0 88.3 99.5 47.7 62.5 94.1
90.0 55.1 75.3 84.8 52.8 52.8 79.5
75.5 60.1 62.5 70.3 57.8 43.2 65.0
120.3 46.3 101.3 114.0 44.1 71.6 107.8
103.5 51.9 86.3 97.3 49.7 60.5 91.1
86.8 57.4 71.6 80.6 55.2 49.4 74.3
134.2 43.4 112.8 127.1 41.3 79.7 119.9
115.4 49.3 96.2 108.4 47.2 67.2 101.2
96.7 55.2 79.6 89.7 53.1 54.8 82.5
LAT
56.9
60.4
63.8
56.7
58.2
61.3
50.5
54.9
59.2
56.7
58.2
61.3
49.9
54.3
58.7
47.0
51.9
56.6
48.9
53.5
57.9
45.4
50.4
55.4
42.6
48.0
53.4
45.4
50.4
55.4
42.0
47.5
53.0
39.2
45.1
51.0
L/M
91.0
79.2
67.4
106.8
92.7
79.0
120.9
105.1
89.4
106.8
92.7
79.0
124.3
108.0
91.9
140.2
121.9
103.7
129.8
112.9
96.0
150.1
130.4
111.0
168.3
146.3
124.4
150.1
130.4
111.0
172.6
150.0
127.6
192.6
167.4
142.3
11
kW
67.9
59.1
50.3
79.1
69.2
58.9
90.2
78.4
66.7
79.1
69.2
58.9
92.7
80.6
68.6
104.6
90.9
77.4
96.8
84.2
71.6
112.0
97.3
82.8
125.6
109.2
92.8
112.0
97.3
82.8
128.7
111.9
95.2
143.7
124.9
106.1
LAT
66.0
69.5
73.0
62.2
66.1
70.1
59.0
63.3
67.7
62.2
66.1
70.1
58.2
62.7
67.1
55.0
59.9
64.7
57.1
61.7
66.3
53.2
58.2
63.3
50.0
55.5
60.9
53.2
58.2
63.3
49.3
54.8
60.3
46.1
52.1
58.0
L/M
58.1
50.2
42.4
70.4
58.9
49.6
77.0
66.4
56.0
70.4
58.9
49.6
79.0
68.3
57.5
89.0
76.9
64.8
82.5
71.2
60.0
95.2
82.3
69.2
106.6
92.0
77.5
95.2
82.3
69.2
109.3
94.3
79.4
121.8
105.1
88.4
17
kW
65.2
56.4
47.6
76.1
65.8
55.6
86.3
74.5
62.8
76.1
65.8
55.6
88.6
76.6
64.6
99.9
86.2
72.6
92.5
79.9
67.3
106.8
92.3
77.7
119.6
103.2
86.9
106.8
92.3
77.7
122.6
105.8
89.0
136.6
117.9
99.1
100
LAT
63.5
67.1
70.5
59.9
63.8
67.6
56.6
61.0
65.3
59.9
63.8
67.6
55.9
60.3
64.7
52.7
57.6
62.4
54.8
59.4
63.9
50.9
56.0
61.0
47.8
53.3
58.7
50.9
56.0
61.0
47.1
52.7
58.2
44.1
50.0
55.9
L/M
41.6
35.7
29.9
49.2
43.5
34.9
54.9
47.1
39.3
49.2
43.5
34.9
56.4
48.3
40.3
63.4
54.4
45.3
58.8
50.4
42.0
67.8
58.1
48.3
75.8
64.8
53.9
67.8
58.1
48.3
77.6
66.4
55.3
86.4
73.9
61.4
22
kW
62.4
53.6
44.8
72.5
62.8
52.3
82.3
70.5
58.8
72.5
62.8
52.3
84.5
72.4
60.4
95.1
81.5
67.9
88.1
75.6
63.0
101.6
87.0
72.4
113.6
97.2
80.9
101.6
87.0
72.4
116.4
99.6
82.9
129.5
110.8
92.1
LAT
61.0
64.5
67.9
57.2
63.3
65.2
54.2
58.5
62.8
57.2
63.3
65.2
53.5
57.9
62.3
50.4
55.3
60.0
52.4
57.0
61.5
48.6
53.7
58.7
45.6
51.1
56.5
48.6
53.7
58.7
45.0
50.5
56.0
42.0
47.9
53.8
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 20
4530
3775
3020
3400
2830
LAT
LAT
189.3 143.1 43.3 119.4 135.6 41.3
LAT
L/M
68.8
87.8
52.0 133.2 99.8
63.5
83.5
94.1
61.4
47.7 158.5 118.8 59.0 100.4 113.0 56.9
79.0
50.0 154.1 115.5 60.7
96.4 108.6 58.7
11
kW
LAT
L/M
22
kW
LAT
88.1
59.1 146.4 109.3 66.9
92.4 103.6 64.8
17
kW
LAT
65.2
97.7
62.7
78.1 116.4 58.4
90.8 134.9 53.6
L/M
67.4 101.5 56.6 169.4 126.4 63.9 106.6 119.5 61.9
82.0 123.4 51.6 198.7 148.2 58.9 126.1 141.5 56.9
75.1 112.5 59.9
89.7 134.5 54.9
96.6 145.4 46.6 228.2 170.3 53.8 145.7 163.4 51.8 104.4 156.5 49.8
58.6
71.2 107.1 54.7 171.7 128.1 62.4 109.2 122.5 60.3
84.8 125.5 50.7 197.3 147.2 57.8 126.2 141.5 55.7
L/M
88.1
48.3 172.7 129.5 58.5 107.9 121.5 56.5
75.3 113.3 54.5 190.0 141.7 61.5 119.3 133.8 59.6
84.0 125.8 57.6
91.6 137.9 49.2 222.9 166.3 56.1 141.2 158.4 54.2 100.4 150.4 52.2
242.1 182.9 37.6 152.2 172.8 35.8 107.1 162.5 33.9 279.8 211.0 42.4 179.8 202.5 41.2 127.9 192.5 39.3 295.1 223.2 44.4 193.7 217.3 43.8 138.4 207.5 42.1
4
203.4 153.6 43.6 126.4 143.5 41.8
164.8 124.5 49.6 100.7 114.3 47.7
15
27
90.6 102.9 49.4
78.2 117.1 59.0
93.4 140.0 53.9
148.0 111.8 51.4
70.1 105.5 55.8 176.5 131.7 63.1 111.0 124.5 61.1
85.3 128.4 50.8 207.0 154.5 57.9 131.4 147.3 55.9
182.6 137.9 45.8 113.6 129.0 43.9
49.4 160.5 120.3 59.9 100.4 113.1 57.9
27
82.1
93.7
47.4 184.2 138.0 57.2 114.9 129.4 55.3
80.1 120.6 53.3 202.6 151.2 60.1 127.2 142.7 58.2
89.3 133.9 56.3
97.6 146.8 47.8 237.8 177.4 54.5 150.5 168.9 52.6 106.9 160.2 50.7
68.4 103.8 45.8 205.2 153.8 55.0 127.8 143.9 53.2
89.0 133.9 51.3 225.8 168.4 57.7 141.5 158.7 55.9
99.3 148.8 54.1
87.8 133.1 39.9 244.2 183.0 49.0 153.8 173.2 47.2 108.4 163.2 45.4 265.0 197.7 51.7 167.6 188.0 49.9 118.8 178.1 48.1
61.7
79.1 120.0 41.9 219.2 164.3 51.6 138.2 155.7 49.7
96.4 146.3 36.3 254.3 190.6 45.9 161.5 182.0 44.0 115.1 173.2 42.1 273.1 203.8 48.8 174.1 195.2 46.9 124.5 186.6 45.0
54.2
69.3 105.1 44.4 190.9 143.1 54.8 120.6 135.9 52.8
15
51.6
217.4 164.2 40.2 136.8 155.3 38.2
90.0
4
79.3
129.0 97.5
53.6
159.0 120.2 48.5
84.4 128.0 39.2 221.5 166.0 49.6 140.9 158.7 47.6 100.5 151.4 45.6 237.8 177.4 52.7 151.8 170.2 50.7 108.7 162.9 48.7
58.1
74.3 112.8 43.0 205.5 154.0 53.1 129.7 146.0 51.1
90.6 137.4 37.7 238.5 178.7 47.6 151.5 170.7 45.7 108.0 162.6 43.7 255.9 190.9 50.6 163.3 183.1 48.7 116.9 175.1 46.8
52.1
66.6 101.0 45.1 183.3 137.3 55.7 115.8 130.5 53.7
81.1 123.0 40.1 212.6 159.3 50.6 135.3 152.4 48.7
45.3
57.9
LAT
100
27
99.4 112.8 46.5
17
kW
70.4 106.8 43.2 183.8 137.7 54.4 117.2 132.0 52.3
L/M
Entering Water Temperature (°C)
95
Water Temperature Drop (°C)
11
22
17
kW LAT L/M kW LAT L/M kW
15
50.4
4
96.7
138.8 104.9 52.4
85.1
171.2 129.4 47.1 106.8 121.2 45.1
52.2
27
86.5
15
76.2
203.8 154.0 41.7 128.4 145.8 39.7
4
54.3
123.9 93.6
27
95.4 108.3 47.2
152.9 115.5 49.3
54.3
15
75.1
181.8 137.4 44.3 114.7 130.3 42.2
66.1
49.9
4
56.5
94.0
107.3 81.0
82.7
99.4 112.9 45.4
22
kW
27
52.1
L/M
132.2 99.9
157.3 118.9 47.5
11
kW
80
15
4
L/M
LAT = Leaving Air Temperature
240
180
2265
Entering
Model Airflow
Air Temp
No.
(L/s)
(°C)
HOT WATER COIL CAPACITIES
WEIGHT DATA
Net
Model Number
Shipping
kg
lbs.
kg
lbs.
072
150
330
172
380
090
159
350
181
400
120
197
435
225
495
150
206
455
234
515
180
680
308
760
345
240
720
327
800
363
OPTIONS / ACCESSORIES
Net
Shipping
kg
lbs.
kg
lbs.
6.9 kW
29
65
34
75
10.4 kW
29
65
34
75
17.4 kW
29
65
34
75
24.3 kW
29
65
34
75
15.3 kW
45
100
54
120
23.0 kW
45
100
54
120
30.6 kW
45
100
54
120
38.3 kW
45
100
54
120
T2ECON31L-1-
32
71
75
165
T2ECON31M-1-
52
114
120
265
T2ECON31N-1-
73
160
168
370
T2FLTR70L-1-
3
7
5
10
T2FLTR70M-1-
5
10
6
14
T2FLTR70N-1-
7
15
9
20
T2HWCL10LM1-
29
65
36
80
T2HWCL10N-1-
36
80
45
100
T2GARD30L-1
2
4
9
20
T2GARD30M-1
2
5
14
30
T2GARD30N-1
3
6
16
35
T2UVCL10LM1Y
8
17
9
20
T2UVCL10N-1Y
10
23
12
26
ELECTRIC HEAT
072-150
180-240
ECONOMIZER
127 MM FILTER MOUNTING KIT
HOT WATER COIL
RETURN AIR GRILLE
UVC LIGHT KITS
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 21
UNIT CLEARANCES - MM (INCHES)
INSTALLATION CLEARANCES (WITH ELECTRIC HEAT)
Cabinet − 0 mm (0 in.)
To Plenum − 0 mm (0 in.)
To Outlet Duct within 3 feet (914 mm) − 0 mm (0 in.)
2
See
NOTES
RECOMMENDED SERVICE CLEARANCES
COIL / UVC LIGHT
ACCESS
1
1
CONTROL
BOX
3 See
NOTES
FILTER/
DRAIN PAN
ACCESS
1 See
NOTES
SUPPLY AIR
OPENING
2
Filter Removal and Routine Maintenance
(Horizontal / Upflow):
914 mm (36 in.)
Service Clearance for Drain Pan Removal
(Horizontal / Upflow):
TAA072, TAA090 − 1448 mm (57 in.)
TAA120, TAA150 − 1854 mm (73 in.)
TAA180, TAA240 − 2590 mm (102 in.)
Coil Cleaning / UVC Light Access (Upflow) :
All models − 914 mm (36 in.)
3
TOP (Upflow) or END (Horizontal) VIEW
Coil Cleaning / UVC Light Access
(Horizontal / Upflow):
Provide 914 mm (36 in.) on this side if top/rear access is obstructed
3
Alternate Drain/Refrigerant Line Location
(Horizontal / Upflow):
Allow additional clearance if refrigerant or drain lines are routed from this side of cabinet.
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 22
DIMENSIONS - MM (INCHES) - TAA072 AND TAA090
UPFLOW POSITION SHOWN
1302
(51-1/4)
CONTROL BOX
(Alternate Location)
POWER
ENTRY
HOLES
749
(29-1/2)
SUPPLY AIR
OPENING
473
(18-5/8)
NOTE:
072 models only use one Suction and Liquid
Line. Cabinet has knockouts for two. Either
opening may be used.
35
(1-3/8)
CONTROL
BOX
SUPPLY END VIEW
1302
(51-1/4)
654
(25-3/4)
25 (1)
TYP.
429
(16-7/8)
SUPPLY AIR FLANGES 35
(Furnished with Unit, (1-3/8)
Field Installed)
473
(18-5/8)
AIR FLOW
CC
BB
749
(29-1/2)
CONTROL BOX
(Alternate Location)
CONTROL
BOX
EE
51
(2)
1391
(54-3/4)
CENTER OF
GRAVITY
BLOWER
CONDENSATE
DRAIN
(Horizontal)
76
(3)
SUCTION (VAPOR) LINE
INLETS / KNOCKOUTS (2)
LIQUID LINE
INLETS / KNOCKOUTS (2)
267
(10-3/4)
762
(30)
SIDE RETURN
AIR OPENING
524
(20-5/8)
667
(26-1/4)
524
(20-5/8)
AIR FLOW
FF
419
356 (16-1/2)
473
302 (14)
(18-5/8)
(11-7/8)
INDOOR
COIL
AIR FILTERS
AA
1 (25)
TYP.
51
(2)
RETURN AIR FLANGES
(Furnished with Unit,
Field Installed)
DD
RETURN AIR FLANGES
(Furnished with Unit,
Field Installed)
41
(1-5/8)
762 (30)
RETURN AIR OPENING
(Bottom or Horizontal Applications)
524
(20-5/8)
76
(3)
CONDENSATE
DRAIN (Upflow)
RETURN AIR
OPENING
(Bottom or Horizontal Applications)
INLET VIEW
DRIVE END VIEW
CORNER WEIGHTS
AA
48
(1-7/8)
AIR FLOW
BB
CC
CENTER OF GRAVITY
DD
kg lbs. kg lbs. kg lbs. kg lbs. mm
EE
FF
in.
mm
in.
40 88 40 88 40 88 40 88 648 25-1/2 648 25-1/2
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 23
DIMENSIONS - MM (INCHES) - TAA0120 AND TAA150
UPFLOW POSITION SHOWN
1708
(67-1/4)
749
(29-1/2)
CONTROL BOX
(Alternate Location)
SUPPLY AIR
OPENING
POWER
ENTRY
HOLES
473
(18-5/8)
CONTROL
BOX
35
(1-3/8)
SUPPLY END VIEW
25 (1)
TYP.
1708
(67-1/4)
654
(25-3/4)
SUPPLY AIR
FLANGES (Furnished
35
with Unit, Field
(1-3/8)
Installed)
429
(24-7/8)
749
(29-1/2)
473
(18-5/8)
AIR FLOW
CC
BB
CONTROL BOX
(Alternate Location)
CONTROL
BOX
CENTER OF
GRAVITY
EE
51
(2)
1391
(54-3/4)
BLOWER
76
(3)
CONDENSATE
DRAIN
(Horizontal)
FF
LIQUID LINE
INLETS/KNOCKOUTS (2)
283
(11-1/8)
524
(20-5/8)
667
(26-1/4)
524
(20-5/8)
SIDE RETURN
AIR OPENING
AIR FLOW
1143
(45)
SUCTION (VAPOR) LINE
INLETS/KNOCKOUTS (2)
INDOOR
COIL
AIR FILTERS
DD
AA
25 (1)
TYP.
1143 (45)
AIR FLOW
RETURN AIR FLANGES
(Furnished with Unit,
Field Installed)
51
(2)
RETURN AIR FLANGES
(Furnished with Unit, Field Installed)
RETURN AIR OPENING
(Bottom or Horizontal Applications)
76
(3)
RETURN AIR
OPENING
(Bottom or Horizontal Applications)
INLET VIEW
DRIVE END VIEW
CORNER WEIGHTS
AA
524
(20-5/8)
41
(1-5/8)
BB
CC
CENTER OF GRAVITY
DD
kg lbs. kg lbs. kg lbs. kg lbs. mm
EE
FF
in.
mm
in.
57 126 46 101 46 101 57 126 851 33-1/2 622 24-1/2
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 24
473
(18-5/8)
302
(11-7/8)
419
(16-1/2)
48
(1-7/8)
356
(14)
CONDENSATE
DRAIN (Upflow)
DIMENSIONS - MM (INCHES) - TAA0180 AND TAA240
UPFLOW POSITION SHOWN
2445
(96-1/4)
749
(29-1/2)
CONTROL BOX
(Alternate Location)
SUPPLY AIR
OPENING
POWER
ENTRY
HOLES
473
(18-5/8)
35
(1-3/8)
CONTROL
BOX
SUPPLY END VIEW
2445
(96-1/4)
699
(27-1/2)
1311
(51-5/8)
25 (1)
TYP.
749
(29-1/2)
35
SUPPLY AIR (1-3/8)
FLANGES
(Furnished with
Unit, Field
Installed)
473
(18-5/8)
AIR FLOW
CC
BB
CONTROL BOX
(Alternate Location)
CONTROL
BOX
FF
BLOWER
76
(3)
SUCTION (VAPOR) LINE
INLETS/KNOCKOUTS (2)
LIQUID LINE INLETS/
KNOCKOUTS (2)
CONDENSATE
DRAIN
(Horizontal)
1505
(59-1/4)
470
(18-1/2)
667
(26-1/4)
524
(20-5/8)
524
(20-5/8)
SIDE RETURN
AIR OPENING
AIR FLOW
EE
51
(2)
1391
(54-3/4)
CENTER OF
GRAVITY
INDOOR
COIL
AIR FILTERS
DD
AA
25 (1)
TYP.
1505 (59-1/4)
RETURN AIR OPENING
(Bottom or Horizontal Applications)
524
(20-5/8)
76
(3)
419
(16-1/2)
356
(14)
CONDENSATE
DRAIN (Upflow)
RETURN AIR
OPENING
(Bottom or Horizontal Applications)
INLET VIEW
DRIVE END VIEW
CORNER WEIGHTS
AA
48
(1-7/8)
AIR FLOW
51
RETURN AIR FLANGES
(2)
(Furnished with Unit,
Field Installed) 41
(1-5/8)
RETURN AIR FLANGES
(Furnished with Unit, Field Installed)
302
(11-7/8)
473
(18-5/8)
BB
CC
CENTER OF GRAVITY
DD
EE
FF
kg lbs. kg lbs. kg lbs. kg lbs. mm
in.
mm
50 110 45 99 53 116 59 130 1321
52
654 25-3/4
in.
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 25
DIMENSIONS - MM (INCHES)
TYPICAL SUPPORT METHOD FOR AIR HANDLER WITH HEAT SECTION IN HORIZONTAL POSITION
TAA AIR HANDLER
(HORIZONTAL POSITION)
ELECTRIC or HOT
WATER SECTION
SUPPORT RODS (4)
102 (4) TAA072, 090, 120, 150
254 (10) TAA180, 240
RECOMMENDED
SUPPORT RAILS
102 (4) TAA072, 090, 120, 150
254 (10) TAA180, 240
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 26
NOTES:
2 Ensure support rails do not interfere with ducting, plumbing or
electrical connections.
3 When hot water or electric heat section is installed, additional
support underneath these accessories will be required.
4 Support rods and rails are field supplied.
DIMENSIONS - MM (INCHES) - ELECTRIC HEAT
C
17
(11/16)
1
B
17
(11/16)
1
467
(18-3/8)
FIELD POWER ENTRY
D
1
TOP VIEW
17
(11/16)
1
467
(18-3/8)
NOTE-Opening same top and bottom.
27-1/4
(692)
A
D
1
25 (1)
381
(15)
AIR FLOW
POWER AND CONTROL WIRING
TO AIR HANDLER
25 (1)
FRONT VIEW
Air Handler
Usage
C
B
SIDE VIEW
A
B
C
D
mm
in.
mm
in.
mm
in.
mm
in.
TAA072 Thru TAA150
689
27-1/8
648
25-1/2
21
13/16
21
13/16
TAA180 Thru TAA240
1441
56-3/4
1302
51-1/4
38
1-1/2
102
4
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 27
DIMENSIONS - MM (INCHES) - HOT WATER COIL
2-1/4
(57)
1
A
1
1
24
(610)
NOTE - Openings same size top and bottom.
2-1/4 (57)
TOP VIEW
28-1/2
(724)
B
2-1/8 (54)
WATER OUTLET
2-1/2
(64)
WATER INLET
14
(356)
AIR FLOW
2-7/8 (73)
FRONT VIEW
SIDE VIEW
1-5/8
(41)
Air Handler
Usage
A
B
mm
in.
mm
in.
TAA072 Thru TAA150
914
36
1219
48
TAA180 Thru TAA240
1372
54
1676
66
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 28
DIMENSIONS - MM (INCHES) - ECONOMIZER
C
521
(20-1/2)
NOTE- Economizer section may be. rotated
180° for bottom return air connection.
76 (3)
686
(27)
RETURN
19
(3/4)
AIR
C
B
TOP VIEW
19
(3/4)
A
19
(3/4)
SUPPLY
OUTDOOR
AIR
622
(24-1/2)
AIR
C
521
(20-1/2)
19
(3/4)
22
(7/8)
SIDE VIEW
Model No.
(Air Handler Usage)
A
C
B
END VIEW
B
C
mm
in.
mm
in.
mm
in.
T2ECON31L-1(072-090)
813
32
762
30
25
1
T2ECON31M-1(120-150)
1308
51-1/2
1143
45
83
3-1/4
T2ECON31N-1(180-240)
72
1829
60
1524
6
152
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 29
ACCESSORY DIMENSIONS - MM (INCHES)
AIR HANDLER WITH OPTIONAL ELECTRIC HEAT/HOT WATER COIL AND ECONOMIZER
UPFLOW
SUPPLY
AIR
16 (406)
Electric Heat
14 (356)
Hot Water
1 HEAT
SECTION
NOTE -Electric Heat flange installs
inside supply air flange on air
handler unit
Hot Water Coil installs flush
on air handler unit
Mounting holes are furnished
for alignment.
27
(686)
RETURN
OUTDOOR
1
AIR
70-3/4 (1797)
Electric Heat
68-3/4 (1746)
Hot Water
1 AIR
HANDLER
SECTION
54-3/4
(1391)
AIR
ECONOMIZER
DAMPER
SECTION
RETURN
1
AIR
ECONOMIZER
DAMPER
SECTION
1 ALTERNATE
ECONOMIZER
LOCATION
1
16 (406)
Electric Heat
14 (356)
Hot Water
HORIZONTAL
OUTDOOR
AIR
97-3/4 (2483) Electric Heat
95-3/4 (2432) Hot Water
54-3/4
(1391)
1 HEAT
SECTION
27
(686)
1 AIR
HANDLER
NOTE -Electric Heat flange installs
inside supply air flange on air
handler unit
Hot Water Coil installs flush
on air handler unit
Mounting holes are furnished
for alignment.
1
RETURN
AIR
ECONOMIZER
DAMPER
SECTION
RETURN
1
ECONOMIZER
DAMPER
SECTION
AIR
OUTDOOR
AIR
AIR
1 ALTERNATE
ECONOMIZER
LOCATION
1
OUTDOOR
50hz TA 21.1 to 70 kW R-410A Air Handlers / Page 30
NOTE -Economizer, Electric Heat/
Hot Water Coil and Air Handler
must be properly supported.
NOTE -Economizer, Electric Heat/
Hot Water Coil and Air Handler
must be properly supported.
REVISIONS
Sections
Description of Change
Document
Updated to new publishing software. No changes to data.
Visit us at www.lennox.com
For the latest technical information, www.lennoxcommercial.com
Contact us at 1-800-4-LENNOX
NOTE - Due to Lennox’ ongoing commitment to quality, Specifications, Ratings and Dimensions subject to change without notice and without incurring liability.
Improper installation, adjustment, alteration, service or maintenance can cause property damage or personal injury.
Installation and service must be performed by a qualified installer and servicing agency.
©2010 Lennox Industries, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising