Page 1 5. UBSAN Ages 14+ Please read the instructions carefully

Page 1 5. UBSAN Ages 14+ Please read the instructions carefully
 THE HUBSAN X4
2.4GHZ RC SERIES 4 CHANNEL
ITEM NO.:HI07
FLIP TIPS SEE PAGE 14-16
www. HUDSAN.COM
CATALOG
INTRODUCTION Cums soni ss a LS AN Dd us TSI 02
SAFETY NOTES .............e.e.ececcccccoceccccccoranaacace eee nn 02
SAFETY EMECK BEFORE ELTING 2.2070 AA E 04
CHARGING THE LI-POBATTERY............2.222000000 0 00e nn ne nee annee nec e nc nan nn ns 05
TRANSMITTER: coconuts ss ENANA IAE ETES 06
A En 09
ADVANCED PERFORMANCE SETUP ova mmm mesma id ee a ae a 12
REPLACING PROPELLERS .......................eee—eecccccxcmccaccaccaconecacoae e 16
REMOVING AND INSTALLING LEDS ......................—...00000200ca0aaannane. 18
EXPLODED VIEW ...................ec00rccccarecsccorererrareeceneececareacenenees 19
HIOZ TROUBLESHOOTING voici assis ids cas oss seas a Si Dea Se wr sian 20
N nee n en ee mm mme 23
ES
THE HUBSAN X4
www. HUDSAN.COM
1 INTRODUCTION
Thank you for buying HUBSAN products. The X4 quadcopter is designed as an easy-to-use,
full-featured RC model capable of hovering, fast forward, and aerobatic flight maneuvers. Please read
the manual carefully and follow all instructions in it. Be sure to retain the manual for future reference,
routine maintenance, and tuning.
2 SAFETY NOTES
2.1 Important Notes
This RC quadcopter is not a toy.
Any improper use of this product will result in serious injury. Be aware of your personal safety,
safety of others and your surrounding environment.
We recommend beginners learn to fly with more experienced pilots playing nearby before
attempting to fly the X4 for the first time.
2.2 Caution
The X4 quadcopter has parts that move at high speed, which poses a certain degree of danger.
Choose a wide open space without obstacles. Do not operate the X4 near buildings, crowds of
people, high voltage cables, or trees to ensure the safety of yourself, others and your model.
Improper operation may cause damage to people and property.
2.3 LiPo Battery Safety Notes
The X4 is powered by a Lithium-Polymer (LiPo) battery.
To avoid risk of fire or damage, never recharge your battery while it is inserted in the X4.
If you do not plan to fly the X4 for a week or more, store the battery approximately 50% charged to
maintain battery performance and life.
Ш 02 APAGAR ХА
www. Hubsan.com
SAFETY ADVISORY NOTICE
Lithium-Polymer (LiPo) Batteries
LiPo batteries are different from conventional batteries in that their chemical contents
are encased in a relatively lightweight foil packaging. This has the advantage of
significantly reducing their weight, but does make them more susceptible to damage if
roughly or inappropriately handled. As with all batteries, there is a risk of fire or
explosion if safety practices are ignored:
M Charge and store LiPo batteries in a location where a battery fire or explosion
(including smoke hazard) will not endanger life or property.
Keep LiPo batteries away from children and animals.
Never charge the LiPo battery that has ballooned or swelled .
Never charge the LiPo battery that has been punctured or damaged.
E E Ed Ee
After a crash, inspect the battery pack for the sign of damage. Discard in
accordance with your country's recycling laws.
Never charge the LiPo battery in a moving vehicle.
Never overcharge the LiPo battery.
Never leave the LiPo battery unattended during recharging.
Do not charge LiPo batteries near flammable materials or liquids.
E E E E E
Ensure that charging leads are connected correctly. Reverse polarity charging can
lead to battery damage or a fire or explosion.
El
Have a suitable fire extinguisher (electrical type) OR a large bucket of dry sand near
the charging area . Do not try to extinguish electrical (LiPo) battery fires with water.
M Reduce risks from fire/explosion by storing and charging LiPo batteries inside a
suitable container.
М Protect your LiPo battery from accidental damage during storage and
transportation. (Do not put battery packs in pockets or bags where they can short
circuit or can come into contact with sharp or metallic objects.).
M If your LiPo battery is subjected to a shock (such as a crash), place it in a metal
container and observe for signs of swelling or heating for at least 30 minutes.
M Do not attempt to disassemble or modify or repair the LiPo battery.
A 0 Tai ESAN X4
www. HUDSAN.COM
2.4 Prevent Moisture
The X4 contains many precision electrical components.
Store the battery and the X4 in a dry area at room temperature. Exposure to water or moisture may
cause malfunction resulting in loss of responsiveness, or a crash.
2.5 Proper Operation
For safety only use the included HUBSAN spare parts for replacement.
2.6 Always Be Aware of the Rotating Blades
When in operation, the main and tail rotor blades will be spinning at high speed. The blades are
capable of inflicting serious body injury or property damage.
Be careful to keep your body and loose clothing away from the blades. Never take your eyes off the
X4 or leave it unattended while it is turned on. Stop operating immediately if the X4 flies out of your
view. Once landed, immediately turn off the X4 and transmitter.
2.7 Avoid Flying Alone
Beginners should avoid flying alone when learning flight skills. We recommend flying with an
experienced pilot nearby in case you need help.
3 SAFETY CHECK BEFORE FLYING
CAREFULLY INSPECT THE X4 BEFORE EVERY FLIGHT
« Before operation, check the batteries of the transmitter and X4 are charged for the flight.
« Before turning on the transmitter, check that the throttle stick is pulled completely backward
(down position).
« Carefully check rotor blades and rotor holders. Broken parts will pose risk of injury and hazard.
« Check the battery and power plug are securely fastened. Severe vibration during flight may
detach the plug and result in loss of control.
« When turning on the unit, always turn on the transmitter first, and then turn on the X4. To power
off, always turn off the X4 first and then the transmitter. Improper procedure may cause loss of
control of the quadcopter.
Ш 04 APAGAR ХА
www. Hubsan.com
4 CHARGING THE LI-PO BATTERY
4.1 3.7V 280mAh LiPo Battery
4.1.1 Take out the battery from the bottom of the X4.
4.1.2 Connect the battery with USB charger, then connect the USB charger to a computer or other
USB connector, such as a smartphone
charger. The LED lights up while charging |
and turns off when charging is complete.
The voltage of the USB is +5+0.5V.
Jism =
4.2 Safety Advisory Notice
Always partially charge your LiPo battery before storage. LiPo batteries retain the power over a
reasonable period; It is not normally necessary to recharge stored LiPo batteries unless stored for
periods longer than 3-6 months.
If your LiPo battery has been over-discharged, it will not be possible to recharge it again.
“>
X LiPo Battery Disposal & Recycling ta
Lithium-Polymer(LiPo) batteries must not be placed in with household trash. Please contact
your environmental or waste agency or the supplier of your model for local regulations and
the location of your nearest LiPo battery recycling center.
A 0 Tai BSAM X4
www. HUDSAN.COM
5 TRANSMITTER
5.1 Identification and Functions of the Main Menu
Main Menu
dm pesa | SEA
dern I 0 Condy ie lL _5 О Joma
Expert mode Е MON | Expert mode =
Ruddertrim —— 7 Expert M0 ————Aileron trim Ruddertrim Е y Expert lero trim
MODE 1 MODE 2
TRANSMITTER
LCD À
4 Elevator Trim | ap 6 mote Tam
(2) Elevator/Rudder Stick (1) Throttle /Aileron Stick
: == 7 Power Switch
E
>Mueder Lim a 3 Aileron Trim
MODE 1
LCD AN
6 Throttle Trim |. SUN Elevar Tim
1 Throttle/Rudder Stick 2 Elevator/Aileron Stick
5 Rudder Trim
7 Power Switch
3 Aileron Trim
H107
THE HUBSAN X4
«06
www. Hubsan.com
Input Key Function
S/N Mode/ Control Function
MODE 1 Move the stick forward or backward to increase or decrease speed . Move
(1) the stick left or right to make the quadcopter roll left or right to initiate
Throttle /Aileron Stick a banked turn.
Move the stick forward or backward to make the quadcopter nose point
MODE 1
(2) up or down. Move the stick left or right to make the quadcopter
Elevator/Rudder Stick yaw left or right.
Move the stick forward or backward to make the quadcopter ascend or
MODE 2
1 descend. Move the stick left or right to rotate the quadcopter’'s fuselage
Throttle/Rudder Stick left or right.
Move the stick forward or backward to make the quadcopter move
2 AIDE 2 | forward or backward. Move the stick left or right to make the
Elevator/Aileron Stick quadcopter drift sideways left or right.
3 Aileron Trim Aileron trim adjusts for left and right drift.
4 Elevator Trim Elevator trim adjusts for forward and backward drift.
5 Rudder Trim Rudder trim adjusts for drift of left and right rotation or yaw.
6 Throttle Trim Throttle trim normally left at neutral. The lower trim turns LEDs on and off.
7 Power Switch Push to ON to turn on the transmitter. Push to OFF to turn off.
Electrical and electronic equipment that are supplied with batteries
(including internal batteries)
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It should
be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or
returned to the supplier for disposal.
Internal / Supplied Batteries.
This symbol on the battery indicates that the battery is to be collected separately.
This battery is designed for separate collection at an appropriate collection point.
EE O07 Busan xa
www. HUDSAN.COM
5.2 Transmitter Stick Calibration
Mode 2: Push both sticks to the upper left position and hold, then power on the transmitter. Rotate
both sticks twice. Hold down any trim until the LED on the transmitter blinks red, indicating
successful calibration.
Mode 1: Push the left stick to the upper left position and right stick to the upper right position and
hold, then power on the transmitter. Rotate both sticks twice. Hold down any trim until the LED on
the transmitter blinks red, indicating successful calibration.
Mode 2/Mode 1 Mode 2/Mode 1
5.3 Transmitter Battery Installation
Notice: Do not mix old and new batteries.
Do not mix different types of batteries.
Do not charge non-rechargeable batteries.
Install 4 x AAA batteries Replace cover
according to the correct polarities
Remove the cover
Ш 08 APAGAR ХА
www. Hubsan.com
6 FLY THE X4
6.1 Power-On Safety Mode
Your X4's flight contoller is designed with a Power-On safety feature that ensures that the X4's motor
will not start unless it detects a suitable control signal when the LiPo battery is connected.
6.1.1 Make sure the throttle stick is in the full down position.
6.1.2 Power on the transmitter and the red LED will
blink. Do not move any other stick or trim before the
transmitter and X4 finish pairing, or the X4 will drift.
The transmitter LED will turn green after pairing is
successfully completed.
6.1.3 Connect the battery plug with correct polarity.
A 0 Tai BSAM X4
www. HUDSAN.COM
6.1.4 Insert the battery into the bottom of your X4. Make sure the battery and wires are pushed
into the end of the battery compartment, so they will not negatively affect the center of gravity
and cause unstable flight. Twist the wires and squeeze them into the notched holder as
shown, to prevent shaking when flying.
Always disconnect the X4 battery plug after turning off the transmitter when you stop flying.
6.1.5 LED Indications
After a “beep”, the red LED on the transmitter turns green, and the 6 lights on the X4 light
steadily, indicating successful pairing. Press the lower throttle trim for about 2 seconds to turn
the LEDs on or off. NOTE: The LEDs will automatically blink when the quadcopter battery
power is low or the pairing has failed.
(MODE 2) (MODE 1)
Tip: You do not need to adjust the rudder trim
if the X4 keeps yawing left or right during
flight. The X4 will find the rudder central point
automatically in 3 seconds after the
quadcopter lands on a level ground with
throttle full down. Landing ona level ground
Ш 1 0 APAGAR ХА
www. Hubsan.com
6.2 Transmitter Sticks And X4 Control Responses
CAUTION: To avoid loss of control, always move the transmitter sticks slowly. Be aware that
control inputs will reduce available lift. Be ready to use a little extra throttle to maintain height
during maneuvers.
+
MODE 2 MODE 1 y Down
Throttle increases/decreases the flying height of your quadcopter.
MODE 2 MODE 1
Elevator moves your quadcopter forward and backward.
MU 11
THE HUBSAN X4
www. HUDSAN.COM
7 ADVANCED PERFORMANCE SETUP
7.1 Reverse Setup
7.1.1 Elevator Reverse Setup
Press and hold the Elevator stick for 2 seconds to enter the settings menu. The LCD will display “SE”
Press the Elevator Trim up or down to reverse the channel, and then press and hold the Elevator stick
for 2 seconds to confirm and exit.
Tim puss
9
e |
w|i «—— Elevator Trim
me
2
a E
E d el
7.1.2 Aileron and Rudder Reverse Setup
Press and hold the Elevator stick for 2 seconds to enter the setting menu. Press (a) Aileron Trim /(b)
Rudder Trim left or right to reverse the channel, and then press and hold the Elevator stick for 2
seconds to confirm and exit.
|
г
LL
Tin |
1.5E
>
= =
|__|
=
—
=
|.
BH
=
—
——
г A
A] т A
LL J _— ed | Ler
(@)Aileron Trim (b)Rudder Trim
7.2 Normal and Expert Flight Modes
The X4 is factory set for Normal Mode flying, and it will always power up in Normal Mode. Though
fast and responsive in Normal Mode, the X4 has even greater performance capability when Expert
Mode is activated.
Press the Elevator stick to activate Expert Mode (the X4 and transmitter must both be on). Two beeps
indicate Expert Mode; one beep indicates Normal Mode.
Ш 1 2 APAGAR ХА
www. Hubsan.com
The LCD will display EXPERT and the green LED will blink red and green when in Expert Mode.
Tim} | Ti UBSAN
| 5€, 15E
| Л Le | Г, Expert ı i
Normal mode Expert mode
7.3 Sensitivity Setup
Hold down the Elevator stick for 2 seconds to
enter the setup (SE) menu. Press the base of the
throttle stick, the three-point dotted line starts
to flash (see picture (a) below). Press it again to
switch to different channels. Use the (a) Rudder
Trim, (b) Elevator Trim, or (c) Aileron Trim to
change the sensitivity values shown on the LCD
and then hold down the Elevator stick for 2
seconds to confirm or exit. The X4 control
sensitivity increases with higher value settings.
MATI Ta) |
mE
Li u | —— Flashing
M1 M2 M1
Flashing — ния — 3 mm г
(a) Rudder Sensivity Adjustment (b) Elevator Sensivity Adjustment
#—— Flashing
(c) Aileron Sensivity Adjustment
1 3 NE MURO xa
www. hubsan.com
You can also adjust sensitivity in Expert Mode following the Normal Mode procedure controls
Ti |
169
TET Expert | с
== 3
, 8 wE , 3 dots displayed in Normal (Sensivity range 20-60%)
‘nn
H HE, 5dots displayed in Expert (Sensivity range 60-100%)
Press the Elevator stick to switch between Normal Mode and Expert Mode at any time
7.4 Aerial Flip Mode
The flip maneuver will only work in Expert Mode.
Tim} a я
a
X
Hit N | SF ma |. cn
MODE 2 MODE 1 LI
Use the Elevator stick to enter Expert mode.
OCC Expert |
Press the Throttle stick to enter Flip Mode, indicated by two "beeps".
Press the Throttle stick again to exit Flip Mode, indicated by one "beep".
For proper flip execution, make sure the X4 is close to level, within a 30°
angle with the ground, and add throttle to climb before you perform a flip.
1 4 APAGAR ХА
www. Hubsan.com
7.4.1 Left Flip
Push the Aileron stick fully to the right and then quickly push it fully to the left. Release the stick to
the center position after the flip.
MODE 2 MODE 1
7.4.2 Right Flip
Push the Aileron stick fully to the left and then quickly push it fully to the right. Release the stick to
the center after the flip.
MODE 2 MODE 1
7.4.3 Forward Flip
Pull the Elevator stick backward and then quickly push it forward. Release the stick to the center
after the flip.
MODE 2 MODE 1
Ш 1 5 NE MURO xa
www. HUDSAN.COM
7.4.4 Backward Flip
Push the Elevator stick forward and then quickly pull it backward. Release the stick to the center
after the flip.
Note: when the X4 battery is low, performing flip is not possible.
8 REPLACING PROPELLERS
The X4's propellers are not identical. Each propeller is labeled with an A or B. When installing
replacement propellers, be certain to install as shown below. The X4 will not fly, and will flip and
crash if the propellers are not installed correctly.
<
N
y=
Ш 1 6 APAGAR ХА
www. Hubsan.com
Remove Propellers: Hold the propeller, insert
the U wrench under the propeller, pull up
and the propeller will easily come off the
motor shaft.
Install Propellers: Pinch the propeller hub,
align the hole to the motor shaft, and press +
it straight down firmly but gently. \
The propellors are dangerous when the quadcopter is flying. To avoid injury or damage,
install the protection cover.
Note:
Remove the propellers. Position the cover’s four holes with the motors. Press each of them onto
the motors, then re-install the propellers in their correct positions on the X4 .
When removing the protection cover, remove the propellers first as in the above steps, and
pinch the protection cover from each motor. After any crash landing, always check to make sure
the protection cover is still on tight, and that the body, motors and propellers are not damaged.
I 17 esas |
www. HUDSAN.COM
9. REMOVING AND INSTALLING LEDS
Removal: Unscrew and remove the lower shell and the rubber feet. Then desolder the red and
yellow wires.
Installation: Solder the red wire onto the anode/positive (+) lead of the LED, and the yellow onto
the cathode/negative (-) lead of the LED. Press the LED wires into the leg slots, then press the
motor wires into the leg slots. Install the lower shell, then the rubber feet. You can determine the
color of the LED lights by looking at the color of the LED wire insulation at the bottom of the LED
lens: red insulation is the red LED, blue insulation is the blue LED.
1. First line up the wires with
the slots. The LED's black
insulated cathode(-) wire
must be outermost.
-
2. Line up the LED to the round
holder slot. Press the wires
carefully into the slot and secure
them neatly into the arm.
Installation is complete
О 18 Полн |
PART NAME
White blade B
White blade A
Black blade A
Black blade B
Upper shell
Lower shell
Screw
Screw
1
1
1
1
1
1
2
3
www. Hubsan.com
Ш
PART NAME
RX
720 motor (clockwise)
720 motor (counterclockwise)
Li-po batte
LED-2
LED-1
Rubber feet
1 9 NE MURO xa
1.Transmitter and X4 do not pair.
Throttle stick needs to be in the full down position. Make sure you do not move the transmitter
sticks or trim during initial power-on.
2. Transmitter LED suddenly goes out.
Replace the AAA batteries in the transmitter.
3. Trasmitter display is not showing the setting interface after holding down the throttle for 2
seconds.
The throttle stick needs to be in the full down position.
4. Gyro is not working well.
(1) Battery voltage is too low.
(2) Pair the X4 with the transmitter again.
(3) Land the X4 with the throttle stick in the full down position for 3 seconds and then take off again.
5. X4 won't perform flips.
(1) Press the Elevator stick to enter into Expert Mode.
(2) In Expert Mode, the sensitivity on each channel should be above 90%. You can program the
sensitivity in the Setup Menu. See 7.3 on P13-14.
(3) Press the throttle stick to turn on flip function.
(4) LiPo power is too low. Recharge the X4.
6. Quadcopter is shaking and making noise.
Check that the motors, canopy, body and propellers are all properly positioned.
7. Switching between low and high rates on the transmitter is difficult.
Press the Elevator stick briefly to switch between the Expert Mode (transmitter LED flashes red and
green) and Normal Mode (transmitter lights up green steadily). "Expert" will also appear at the
bottom center on the display.
8. Cannot take off.
(1) Make sure the propellers are installed correctly. The propellers are marked with "A" (clockwise)
and "B" (counterclockwise). Refer to the Top View picture below for the correct orientation.
(2) Make sure that each motor is installed correctly. There are two different motors with different
motor wire colors. Refer to the Bottom View picture below for the correct order.
Top View Bottom View
Ш 20 APAGAR ХА
www. Hubsan.com
9. The motors do not spin freely after a crash.
Press the shaft down from the top of the propeller and motor to remove any objects, or replace
the motor.
10. The arm of the X4 separates after a hard landing or crash.
This is specially designed to absorb impact from hard crashes.
Simply force the arms to snap back into the joint position as y
shown. N E
11. One or more motors stop working.
(1) Replace the motor.
(2) Resolder any broken motor connections.
(3) Replace the flight controller.
12. The X4 always drifts to one direction.
Calibrate the accelerometer as follows:
1) Before calibrating the accelerometer, make sure that the propellers, motors and body are in good
condition with the battery fully charged. Ensure that the battery and the cables are inserted into the
battery compartment correctly (see the picture on P10 6.1.4). Pair the X4 and transmitter, then put
the X4 in Expert Mode (see P12,7.2).
2) Set both the aileron and elevator trim to the middle so that the LCD displays 50.
Г
T SAN
Е En
Elevator trim — Elevator trim
Jp 1 CO E я
== Aleron trim E a trim
(MODE 2)
2 NE MURO xa
www. HUDSAN.COM
3) Hold the Throttle stick to the full down position and move the Rudder stick to the lower right
position. Quickly move the Aileron stick to the left and right repeatedly until the two headlights
blink, indicating successful calibration. This calibration will reduce excessive drifting when doing
level yaw turns.
Mode 1
4) If the X4 still drifts to one side, add a few sheets of paper (the number of sheets will vary
depending on the amount of drift) to the side of the X4 that drifts. The paper will help
counterbalance and create a level offset angle.
Ш 22 APAGAR ХА
www. Hubsan.com
H107 SPARE PART CHART
7
H107-A31 H107-A02 H107-A03 H107-A34
Body Shell Propellers Motor X4 RX
H107-A05 H107-A06 H107-A07 H107-16
Battery USB Charger Screw Set Transmitter
H107-A39 H107-A11 H107-12 H107-A13
Rubber Feet U Wrench Protection Cover T-Shirt
Mn ентеннй
-_—— —""
-— —————
Te
H107-A32 H107C-A33 H107-A18
Blue LEDs Red LEDs Value Pack
H107-A44
4* AAA Rechargeable
NI-MH battery (700mAh )
23 NE MURO xa
www. HUDSAN.COM
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
« Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
« Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
« Consult the local dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Ш 24 APAGAR ХА
THE HUESAN X4
2.4GHZ RC SERIES 4 CHANNEL
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising