POS-X Xr500 Ethernet Interface Install Guide 1 Start the TCPIPCFG program from the desktop shortcut. Make sure that your printer is hooked up to your network (this can be done with a direct connection to the PC using a crossover cable or through a regular network connection) and click on the search button. This will search for any printers on your network. 2 Once the program is done searching it will list all of the found printers. You will then be able to edit the LOCAL IP ADDRESS, SUBNET MASK, and GATEWAY to match your network requirements. Once you have made these changes click on the SAVE button this will save your settings to the printer. 3 Click PRINTERS AND FAXES option. This can be found under SETTINGS it can also be found under CONTROL PANEL 4 Click on the ADD PRINTER button. 5 Click on the NEXT button 6 Select the LOCAL PRINTER ATTACHED TO THE COMPUTER option then click on NEXT 7 Click CREATE A NEW PORT and select the STANDARD TCP/IP PORT. 8 Click on the NEXT button. 9 Fill in the IP address you assigned to your printer. It will automatically fill in the PORT NAME. Then click NEXT 10 Select CUSTOM and click the NEXT button. 11 Click the Finish button. 13 Click the BROWSE button. 15 Select OEMSETUP.INF and click the OPEN button. 12 Click on the HAVE DISK button. 14 Browse to the appropriate location and click the OK button. (If you are not sure where your drivers are refer to driver installation documentation.) 16 Select the EPSON TM-T88II PARTIAL CUT driver ( due to its true Epson emulation we are using the Epson driver) and click the NEXT button. 17 Select if you want this to be the default printer or not (this is user preference) and click the NEXT button. 18 Select if you want to share the printer or not (once again user preference) then click the NEXT button. * If Applicable 19 Select YES for printing a test page and click on the NEXT button. 20 Click the OK button. 21 Click on the CONTINUE ANYWAY button. A test page should now print.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project