MAFELL Produktinformation

MAFELL Produktinformation
Dust Extractor S 25 L 919715
EAN: 4032689189741
Technical data
Nominal power input
1200 W
Bin capacity
25 l
Hose connector
Ø 66/58 mm
Low air pressure
248 mbar
Volume flow rate
220 m³/h
12,5 kg
Bin water capacity
20 l
Universal motor
230 V / 50 Hz
Dimensions (W x L x H)
425 x 380 x 570 mm mm
Delivery specification
1 Folded filter cassette, 1 pair (polyester); Ref. No. 093674
1 Extraction hose 4 m (13.1 ft), Ø 27 mm (1 1/16 in.), anti-static with bayonet lock Ø 6 mm (2 5/8 in.), hose
connector Ø 35 mm (1 3/8 in.); Ref. No. 093684
2 Fold filter cartridges, cellulose (8600 cm²); Ref. No. 093673
1 Non-woven filter bag, 21 l useful capacity
1 Mains cable 8 m; Ref. No. 078207
Examples for usage
Clean and easy: the hose
connector with 35 mm soft cone
allows not only MAFELL power
tools to be connected simply, but
other makes too.
The new type of filter system,
which is especially efficient, has
been designed specifically for use
with power tools.
Made of a special plastic, the 25l
tank is extremely resilient and
durable. It also resists corrosion
and all customary acids and
The hose is antistatic. The user is
thus protected against electrostatic
discharges (electric shock), and
dust residue is less likely to cling
to the hose.
For wet and dry pick-up
For picking up waste
Compatible materials include dust, chips, liquids
Conveniently located on the front of the appliance are the on/off switch, the switch for automatic vibration
and pulse filter cleaning/vibration, the speed control for adjusting the suction force, and the volume flow
Practical hose connector – quick-action/bayonet catch with additional keeper.
Automatic shutdown with wet suction - by means of sensors when maximum capacity is reached.
When used for wet suction cleaning, the appliance cuts out automatically when its maximum capacity is
Whether sawing, drilling or sanding, the innovative MAFELL dust extractors are designed to keep the workplace
The S 25 L model is tested for compliance with dust class L and, in view of its substantial dust retention capacity
(99 %), is suitable for use as a standard industrial and commercial vacuum cleaner.
All the appliances are equipped with microprocessor-controlled electronics for safe and efficient operation. The
features include smooth starting, which eases the load on both the appliance and the power circuit, and automatic
running-on to ensure that the hose is emptied when the extractor is switched off. In addition, the speed control
allows the suction force to be adjusted according to the extent of contamination and the hose diameter.
A long service life is ensured by the high-performance motor fan with bypass cooling. Ideal for wet and dry suction
Thanks to the automatic on/off switch, the MAFELL dust extractors can be used for extracting the dust created by
all other makes of power tool as well. All the MAFELL models are also suitable for picking up liquids.
Accessories / Tools
Hand-held extraction set
Extraction hose 5 m (16 ft.)
Ø 35 mm (1 3/8 in.) with soft cone 35 mm (1 3/8
in.), torsion joint, Ø 66 mm (2 5/8 in.) bayonet,
Extraction hose 2,5 m (8.2 ft)
49 mm (1 15/16 in.) with cone 58 mm (2 5/16
in.), torsion joint, 66 mm (2 5/8 in.) bayonet,
Non-woven filter bags V-FB 35 – pack
of 5
5 pieces, packed
Reducing socket
58 / 35 mm
Folded filter cassette
Extraction hose 4 m (13.1 ft.)
1 pair, polyester
Ø 27 mm (1 1/16 in.) with soft cone 35 mm (1
3/8 in.), torsion joint, Ø 66 mm (2 5/8 in.)
bayonet, anti-static
Beffendorfer Straße 4
D-78727 Oberndorf / Neckar
Tel.: +49 7423 / 812-114
Fax: +49 7423 812-102
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF