instruction manual

instruction manual
ICC
Required Tools
INSTRUCTION MANUAL
Power Tool with
Phillips head
1/2” Wrench
H1 SERIES ALUMINUM
Fullsize Van &
Sprinter Low top 02- 06
PART#
DESCRIPTION
1 BAR 2 BAR 3 BAR 4 Bar
SS-B016
5/16” X 1 1/4” CARRIAGE BOLT
4
8
12
16
SS-B018
5/16” X 1 3/4” Carriage bolt
1
2
4
5
SS-B201
1/2” PHILLIP TAP SCREWS`
4
8
12
16
SS-W008
5/16” X 3/4” WASHER 4
8
12
16
SS-N005
5/16” NYLON NUTS
4
8
12
16
SS-N016plastic knob
0245
A02Ladder Guide
0122
A06Ladder Stopper
0123
a69EZ velcro strap
0123
BG548/49/54/55Rubber bar guard 48”,49”,54”,55”
1
2
3
4
h11DRIP RAIL CLAMP 2” X 8”
2
4
6
8
ITEMs (not drawn to scale)
Upright Mounting base (Refer to chart below)
2468
Cross Bar (Refer to chart below)
1234
Rubber Seat
2468
VEHICLE
1ST BAR (FRONT)
2ND BAR
3RD BAR
4TH BAR (REAR)
CHEVY VAN UP TILL 96
9”, 63”
9”, 63”
9”, 63”
9”, 63”
CHEVY EXPRESS 96-ON
9”, 57”
8 3/8”, 57”
8 3/8”, 57”
9”, 56”
DODGE RAM VAN ALL YEARS
9”, 63”
9”, 63”
9”, 63”
9”, 62”
FORD ECONOLINEUP TILL 1991
9”, 63”
9”, 63”
9”, 63”
9”, 63”
FORD ECONOLINE 92-ON
9”, 63”
8 3/8”, 63”
8 3/8”, 63”
9”, 62”
GMC VANUP TILL 96
9”, 63”
9”, 63”
9”, 63”
9”, 63”
GMC SAVANA 96-ON
9”, 57”
8 3/8”, 57”
8 3/8”, 57”
9”, 56”
SPRINTER 02-06 LOW TOP
9”, 65”
9”, 65”
9”, 65”
9”, 65”
1
Packaged by
Date
[
] Ford Econoline 1992 & On
[
] Dodge Ram Van (All Years)
Upright Mounting Base Heights
Upright Mounting Base Heights
9”
8 3/8” 8 3/8”
9”
9”
Crossbar Lengths
62”
63”
9”
9”
9”
Crossbar Lengths
63”
63”
62”
63”
63”
63”
[
] Chevy Van (till 96)
[
] GMC Savana 1996 & On
[
] GMC Van (till 96)
[
] GMC Express 1996 & On
[
] Ford Econoline (till 1991)
Upright Mounting Base Heights
Upright Mounting Base Heights
9”
9”
9”
9”
9”
Crossbar Lengths
63”
63”
63”
8 3/8”
8 3/8”
9”
Crossbar Lengths
63”
56”
2
57”
57”
57”
[
] Sprinter Low Top (2002-06)
[
] Sprinter High Top (2002-06)
Upright Mounting Base Heights
9”
9”
9”
Upright Mounting Base Heights
16”
9”
16”
Crossbar Lengths
65”
65”
65”
16”
16”
Crossbar Lengths
65”
65”
65”
65”
65”
EZ-Velcro Strap (Not Included)
How it works
(Ladder)
(Rear cross-bar)
Insert rear cross-bar into opening of
EZ-velcro straps.
Slide strap around equipment the
through steel ring.
Rubber Bar Guards
- Press the Rubber Bar Guard into the channels of
cross bars.
- Use a solid object to press down if necessary ie. book,
block or pipe.
Rubber Seats
for
Pull EZ-velcro to secure via velcro.
Upright Mounts
- Slide the Rubber Seats onto th bottom of the Upright Mounts.
- These prevent metal on metal contact for vehicles without a protective layer
on their drip rail.
3
-Height of upright and length of crossbars are vehicle specific.
Please refer to page 3 for correct measurements.
-Front bar should be positioned 6” behind front doors to prevent wind noise/rattle.
-Refer to chart on page 3 for correct upright and bar positioning.
Chevy Express 96-Present
GMC Savana 96-Present
Secure the mounting plate to the
“top” holes of the upright mounts.
Chevy Van GMC Up & Till 96
Dodge All Years
Dodge Sprinter 2002-2006
Ford All Years
Secure the mounting plate to the “bottom”
holes of the upright mounts.
-For Ford Econoline 92-present turn the mounting plate so the hole are slightly
higher.
-Except for the Passenger side barn door. Flip the mounting plate 180° so
doors can open freely.
180°
4
N005
W008
90°
+90°
B201
B016
-Tightly secure hardware.
-Upright mounting base will crimp the drip rail andangle outwards as
hardware is tightened.
Push the upright so it’s 90 degrees then secure
with tap screws.
Ladder Stopper
A02
B018
N016
)
(FRONT BAR
- Ladder Stopper can be installed in the front bar with tip facing the rear, allowing the ladder steps to fit in between. The
bend of the Ladder Stopper prevent the ladder from rattling.
Ladder Guide
A06
B018
N016
(REAR or MID
DLE BAR)
- Ladder Guide can be installed in the rear bar or middle bar to guide ladders down the system.
5
Accessories
ST E E L
&
| H1
A L U M I N U M
A02
Steel Cross Bar
A06
Plastic Bar Guards
Part #
Description
Size
Bar Type
MSRP
Part #
Description
Height
Bar Type
Color
MSRP
A02
Ladder Guide
5.5”
1” X 2”
14.95
A63
Push to Secure
6”-8”
1” X 2”
Black or white
$59.00
A06
Ladder Stopper
5”
1” X 2”
15.95
Ì Ladder Stopper and Guides prevent items from sliding
forward and allows easy bungee and tie-down.
Ì Galvanized and dipped in rubber for durability.
Ì Secure your ladder with the Vantech push 2 secure system.
Part #
Description
Length
MSRP
A42
A50
Plastic Bar Guards
42”
5.00
Plastic Bar Guards
56”
6.00
A88
Plastic Bar Guards
63”
7.00
A89
Plastic Bar Guards
72”
8.00
A41
Plastic Bar Guards
84”
9.00
A60
Plastic Bar Guards
96”
10.00
Ì Clamps onto cross bar with 2” X 1” with “C” clamps.
Ì For Steel Systems
Ì Holds ladders 6”-8” in height.
Ì Prevents scratch and damage to
crossbars
Ì Easy turn knob allows quick adjustment and removal.
Aluminum Cross Bar
Rubber Bar Guards
Vantech 6” conduit carrier. Spring assist rear door for a water tight seal.
Padlock tab for rear hatch door. A35 requires drilling into cross bars.
A34 is a direct bolt-on if you have aluminum cross bars with built-in
channels on top.
Part #
Description
Length
Capacity
MSRP
A69
EZ Velcro Strap
10”
75 lbs
13.95
A81
Adjustable Extension Arm
with 8” Convex Mirror
25”-32
Black or
White
79.00
Ì Made from aluminum material. Bolts onto the
eyehooks on the H series mounting base.
Ì No drilling is required. Extension arm can adjust in
length and angle.
Ì Convex mirror is 8” wide stainless steel.
Rubber Bar Guards
65"
16.00
A52
Rubber Bar Guards
72"
18.00
A36
Rubber Bar Guards
84"
20.00
A85
Rubber Bar Guards
96"
22.00
Bar Type
Color
MSRP
Ì For aluminum systems with channels
A35
6”
Universal
Silver
89.00
Ì Prevents scratch and damage to crossbars
A34
6” Conduit Carrier
(Slider bolt-on)
6”
Aluminum
Channels
Silver
89.00
Ì 6” PVC pipe not included.
MSRP
12.00
A86
Width
Ì Includes: Front cap, rear door, 2 “U” brackets and hardware.
Color
MSRP
48"
Description
Ì Loops into cross bar up to 2” X 1”.
Length
Length
Rubber Bar Guards
6” Conduit Carrier
(drilling required)
Ì Holds up to a maximum of 75 lbs in combination
with the ladder stopper or guide.
Description
Description
A51
Part #
Ì Strap a ladder with the EZ velcro straps.
Part #
Part #
Part #
Description
Width
Bar Type
Material
Color
MSRP
A38
Wind Foil
24"
1” X 2”
Aluminum
Black / White
35.00
A39
Wind Foil
36"
1” X 2”
Aluminum
Black / White
36.00
A53
Wind Foil
48"
1” X 2”
Aluminum
Black / White
37.00
A54
Wind Foil
60"
1” X 2”
Aluminum
Black / White
40.00
A55
Wind Foil
63"
1” X 2”
Aluminum
Black / White
42.00
Ì Reduces windnoise if present
Part #
Description
Length
Capacity
MSRP
A62
VR 500
Ratchet
Tie-Down
10’
150 lbs
35.00
Ì Attach the Vantech Ratchet tie-down to
the eyehooks on the mounting uprights with
1/2” bolts.
Ì Installed onto eyehooks
Reduces wind noise and vibration & still allows
optional accessories for cross bar.
6
Ì Sold as individuals
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising