Pan/Tilt/Zoom Camera EC-740-PTZ-EX-ALU/SST - Stahl

Pan/Tilt/Zoom Camera EC-740-PTZ-EX-ALU/SST - Stahl
Product
DATA
Data sheet no DS0401 130 | EN
2012 | R1-7
Zone 1,2
CE0344
Ex II 2 G
T-amb.
Ex ib mb px IIC T5 Gb
-40°C to +75°C
Pan/Tilt/Zoom Camera EC-740-PTZ-EX-ALU/SST series
R. STAHL Camera Systems GmbH
Im Gewerbegebiet Pesch 14 | D-50767 Cologne | Germany
Phone: +49 221 59 808 300
Website: www.stahl-camera.de
Technical Specifications
Zone 1,2
CE 0344
Ex II 2 G
T-amb.
Ex ib mb px IIC T5 Gb
-40°C to +75°C
Pan/Tilt/Zoom Camera EC-740-PTZ-EX-ALU/SST series
Article
Ex-PCB Connection Board
Article
Ex-PCB Connection Board
Article
EC-740-PTZ-EX-ALU
Article
EC-740-PTZ-EX-SST
Pan/Tilt/Zoom Camera EC-740-PTZ-EX-ALU/SST series
CCD sensor 1/4” type IT CCD (EX view HAD CCD).
Picture elements 752 (H) x 582 (V) (ca. 440 000 pixels)
Resolution 460 TVL (wide end).
Lens F = 4,1 mm (wide) to 73,8 mm (tele). 216 x zoom ratio; 18 x optical zoom, 12 x digital. F=1,4 to F=3,0.
Lens speed From wide optical to tele (optical) 2,1 sec.
Angle of view (H) 48° (wide) to 2,8° (minimum object distance)
Min. working distance 290mm (wide end), 800 mm (tele end).
Min. illumination 0,7 Lux (F1,4 1/50 sec. PAL) 0,1 Lux (F1,4 1/3 sec. PAL).
Day/Night function
Automatic IR Cut filter (ICR)
S/N ratio 50 dB or more.
TV system PAL, CVBS, 625 lines interlaced, 50 Hz, 4,43 MHz colour subcarrier 1 Vtt (75 ohm).
Power consumption Camera unit; Temperature <0°C (heater on): 5,6W. Temperature >0°C (heater off): 3,6 W. Pan & Tilt; 24V, 12W.
Pan angle Total 340°, 170° left, 170° right.
Tilt angle Total 180°, 90° up, 90° down.
Backlash PTZ 1°.
Fixed camera positions 6 preset camera positions, preset tolerance: <1°
Pan & Tilt speed 12,5°/sec. Fuse
The PTZ must be protected with a 500 mA-T fuse, with 1500A breaking capacity. Placed on the Ex-board, see Installation manual IM0973040.
PTZ ALU Housing Anodised aluminium housing corrosion proof according IEC 60068-2-52 salt mist, cyclic.
PTZ SST housing Stainless steel 316.
PTZ ALU Weight 5 kg (including 5 m cable).
PTZ SST Weight 15 kg (including 5 m cable).
Communication RS 232 Visca protocol 9,6 Kbps or RS 232 Pelco D 9,6 Kbps.
Waterproof
IP66/68 following IEC 60529. 1,4 Bar overpressure filled with dry nitrogen, monitored by 2 absolute sensors, long term stability 0,1%/year. Camera is also successfully tested IP69K following DIN 40050-9: camera can withstand a high pressure cleaning with water: 14-16L/min. 80°C and 100 bars flow.
Operating temperature
T5: Tamb -40°C to +75°C. T6: Tamb -40°C to +20°C.
Power input Power PTZ unit = 24V +/-10%.
Included
Steel cable fall protection and a 12AWG 4mm2 wire to earth.
Green Passport All materials are compliant to Green Passport requirements according IMO resolution MEPC.197(62) as adopted on July, 15th 2011 (Maritime sector: International Maritime Organization concerning the functions of the Marine Environment Protection Committee).
Ex-PCB Connection Board
Data sheet Available separately.
Temperature range -40°C ... +80°C
Weight 0.3 Kg
Power input 24V/DC +/-10%
The Ex-PCB Connection Board monitors the gas-pressurised camera via an intrinsic safe circuit. Whenever the protection by pressure
fails all power is switched off and a buzzer will sound. This Board may only be used in combination with the camera’s mentioned in this
datasheet to be compliant with the applicable (EX-)regulations. The board can be mounted in a 19”-rack or in an Ex-board Box.
Pi = 24W
Intrinsic Pressure sensor connector
Electrical Parameters
U0
= 12V
Camera connector Pan & Tilt connector
+
I
= 100mA
U0 = 24V /-10% U0 = 24V +/-10%
0
P0
= 1,2W
I0 = 315mA I0 = 500mA
Ui
= 16V
P0 = 7,6W P0 = 12W
Ii
= 50mA
Power connector
P
= 0,8W
i
Um= 29,5V
C0
= 460F
Ui = 24V +/-10%
L0
= 1,5mH
Ii = 1A
Li =0
Li/Rim = 0
NOTE: The Ex certificate applies only when both EC-740-PTZ-EX-ALU/SST and the Ex-board plate are used together.
www.stahl-camera.de
Technical Specifications
NOTE: For more installation and specification details see the Installation manual IM0973040
Optional configurations
A
OPTIONAL
OPTIONAL
Junction box
Part number 0504791
Display 7”
EC-740-PTZ-EX-ALU
/ SST
Camera PTZ Ex Alu, Art
no 8906910,
SSt Art no 8906900
Connection
Board
SetEx-PCB
Ex board
Plate Art. no
0404960
Display 10”
Display Cable
Optional display
Cable
Cable
Art. No 1221300
12AWG
5m
Camera cable
Art. No 1221300
zone 1, 2
Total
cablelenght
length= max
= max
150 m
Total cable
200m
Shielding and armoring of the Multicable may never come in contact with ground
(also not in combination with gland).
B
OPTIONAL
OPTIONAL
Junction box
Armored
Part number 0504770
Display 7”
EC-740-PTZ-EX-ALU
SST
Camera PTZ Ex Alu, /Art
no 8906910,
SSt Art no 8906900
Board
Set Ex-PCB
Ex boardConnection
Plate Art. no
0404960
Display 10”
12AWG
Optional display
Display Cable
Armored Cable
Cable
Art. No 1221320
5m
Camera cable
Art. No 1221300
zone 1, 2
Total
length= =max
max
150 m
Total cable
cable lenght
200m
Shielding and armoring of the Multicable may never come in contact with ground
(also not in combination with gland).
Zone 1,2
CE0344
Ex II 2 G Ex ib mb px IIC T5 Gb
T.-amb. -40°C to +75°C
All data are subject to change without any notice. All dimensions are for commercial purpose only.
The camera/display systems comply with the latest CE, ADR, EMC and mirror-directive regulations.
All products are manufactured in accordance with the ISO 9001 quality management system, ISO 14001
environmental management systems and all Ex products with the IECEx scheme and ATEX directives.
www.stahl-camera.de
R. STAHL Camera Systems GmbH
Im Gewerbegebiet Pesch 14 | D-50767 Cologne | Germany
Phone: +49 221 59 808 300
Website: www.stahl-camera.de
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising