- Brother International
Quick Setup Guide
Start Here
DCP-T300
DCP-T500W
DCP-T700W
Please read the Product Safety Guide first before you set up your machine. Then, please read this Quick Setup
Guide for the correct setup and installation.
User’s Guides for these models are available at http://solutions.brother.com/manuals.
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injuries.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injuries.
IMPORTANT
IMPORTANT indicates a potentially hazardous situation which, if not avoided, may result in
damage to property or loss of product functionality.
NOTE
NOTE specifies the operating environment, conditions for installation, or special conditions of
use.
NOTE
• Most of the illustrations in this Quick Setup Guide show the DCP-T700W.
• If your computer does not have a CD-ROM drive, the supplied CD-ROM does not contain drivers for your
operating system, or you want to download manuals and utilities, visit your model page at
http://support.brother.com.
1
Unpack the machine
WARNING
Plastic bags are used in the packing of your machine. To avoid the danger of suffocation, keep these
plastic bags away from babies and children. Plastic bags are not toys.
a
Remove the protective tape and film covering the machine, and also from the LCD and the ink tank cover.
CEE-ENG Version 0
1
a
2
Changing the control
panel (if needed)
Remove the original control panel from the
machine with both hands. Then attach the
control panel of your chosen language.
a
4
Choose your language
When the LCD shows this message, press OK.
Select Language
q
Press OK Key
b
c
3
Connect the power cord
Fill the ink tanks
CAUTION
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
The machine must be fitted with an earthed
plug.
NOTE
DO NOT connect the USB cable yet (if you are
using a USB cable).
DO NOT shake the ink bottles. If ink stains your
skin or clothing, wash with soap or detergent at
once.
Make sure you use the Introductory Ink bottles
included with your machine first.
• The Warning LED on the control panel will stay
on until you have filled the ink tanks.
• To prolong the life of the print head, provide the
best ink economy and maintain print quality, we
do not recommend unplugging the machine
frequently and/or leaving the machine
unplugged for extended periods of time. Each
time you plug the machine in, it automatically
cleans the print head, which uses some of your
ink.
We recommend using
IMPORTANT
NOTE
Connect the power cord.
NOTE
to power down the
machine. Using
allows minimal power to
the machine, resulting in periodic, but less
frequent, cleaning of the print head.
2
Press a (Yes) to confirm the language setting.
5
WARNING
a
Press a or b to choose your language and
press OK.
a
b
Make sure that the power is turned on.
Open the ink tank cover a.
1
c
Lift the cap of the ink tank for the colour you
want to fill.
g
Make sure that the colour of the ink tank cap
matches the ink colour you want to fill.
Insert the nozzle of the ink bottle firmly so that
the ink will not be spilled.
Fill the ink tank by gently squeezing the middle
of the bottle as shown.
NOTE
Be careful not to touch any ink when you handle
the cap of the ink tank.
d
e
Unpack the ink bottle.
Remove the cap of the ink bottle, remove the
film from the ink bottle, and then replace the
cap.
NOTE
• Be careful not to spill any ink when you fill the
ink tank.
• Empty the entire bottle into the ink tank.
h
Point the nozzle upward so that the ink will not
be spilled, and then remove the nozzle from the
ink tank.
IMPORTANT
Replace the ink bottle cap tightly. Otherwise ink
may leak.
f
Remove the tip of the ink bottle.
3
i
Push down on the cap of the ink tank to close it
tightly.
a
b
c
j
Pull the paper tray completely out of the
machine.
Open the output paper tray cover.
Gently press and slide the paper width
guides a and then the paper length guide b to
fit the paper size.
Make sure that the triangular marks c on the
paper width guides a and paper length
guide b line up with the marks for the paper
size you are using.
Repeat steps c to i for the three other ink
tanks.
k
6
Load plain A4 paper
Close the ink tank cover.
1
3
IMPORTANT
DO NOT tip the product after the ink tanks are
filled. Doing so may cause ink spillage and
internal damage to the product.
2
3
NOTE
The machine will prepare the ink tube system for
printing. This process will take approximately
seven minutes. Do not turn off the machine. We
recommend you perform the next step while
waiting.
d
Fan the stack of paper well to avoid paper jams
and misfeeds.
NOTE
Always make sure that the paper is not curled or
wrinkled.
4
e
Gently put the paper into the paper tray print
side down and top edge first. Check that the
paper is flat in the tray.
IMPORTANT
Be careful that you do not push the paper in too
far; it may lift at the back of the tray and cause
paper feed problems.
a
7
Check the print quality
When the preparation process has finished, the
LCD shows this message
Set Paper and
q
Press Start
Press Colour Start.
b
c
Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
If all lines are clear and visible, press a (Yes) to
finish the quality check and go to the next step.
If lines are missing, press b (No) and follow the
steps on the LCD.
f
g
h
i
8
Gently adjust the paper width guides to the
paper with both hands. Make sure that the
paper width guides touch the edges of the
paper.
Close the output paper tray cover.
Setting the date and time allows the machine to clean
the print head regularly and maintain optimum print
quality.
a
When the LCD shows this message, press OK.
Date&Time
Slowly push the paper tray completely into the
machine.
While holding the paper tray in place, pull out
the paper support until it clicks, and then unfold
the paper support flap.
Set the date and time
q
Enter & OK Key
b
c
Press a or b to enter the last two digits of the
year, and then press OK.
Repeat for the Month and Day, and then Hours
and Minutes in 24-hour format.
NOTE
You can change the date and time if needed. For
more information uuBasic User’s Guide: Setting
the date and time
5
9
Wireless setup
(DCP-T500W/T700W)
(if needed)
Setup Wi-Fi? message appears on the LCD.
For wireless setup using a mobile device, go to a.
For Windows® and Macintosh users, go to b.
a
b
6
Press a to choose Yes.
Go to step 11 on page 13 to continue with the
wireless setup.
Press b to choose No.
Wireless setup instructions for Windows® and
Macintosh users will be covered later, starting
on page 13.
10
Choose your connection type
These installation instructions are for Windows® XP Home, XP Professional, XP Professional x64 Edition,
Windows Vista®, Windows® 7, Windows® 8, Windows® 8.1 and Mac OS X v10.7.5, 10.8.x, 10.9.x.
NOTE
If your computer does not have a CD-ROM drive, the supplied CD-ROM does not contain drivers for your
operating system, or you want to download manuals and utilities, visit your model page at
http://support.brother.com. Some software applications included on the CD-ROM may not be available as a
download.
Windows®, go to page 8
Macintosh, go to page 11
Windows® Macintosh
USB
For USB interface cable
Wireless Network
For Wireless Network
(DCP-T500W/T700W)
Windows® and Macintosh,
go to page 13
7
USB
Windows®
For Windows® USB interface users
(Windows® XP Home/XP Professional/Windows Vista®/Windows® 7/Windows® 8/Windows® 8.1)
11
Before you install
Make sure that your computer is ON and you are
logged on with Administrator rights.
12
a
13
Connect the USB cable
a
Install MFL-Pro Suite
Put the CD-ROM into your CD-ROM drive. If
the model name screen appears, choose your
machine. If the language screen appears,
choose your language.
NOTE
If the Brother screen does not appear
automatically, go to Computer (My Computer).
b
(File Explorer)
(For Windows® 8: click the
icon on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then
double-click start.exe.
b
c
d
Click Install MFL-Pro Suite and click Yes if
you accept the license agreements.
(DCP-T500W/T700W)
Choose Local Connection (USB), and then
click Next.
(DCP-T300)
Choose Standard, and then click Next.
c
Follow the on-screen instructions until the Plug
in the USB cable screen appears.
IMPORTANT
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
8
USB
Windows®
d
14
1
3
a
2
Finish and restart
Click Finish to restart your computer.
After restarting the computer, you must log on
with Administrator rights.
NOTE
If an error message appears during the software
CAUTION
Be careful not to pinch your fingers when the
scanner cover closes.
e
f
g
i
If the Environmental Advice for Imaging
Equipment screen appears, click Next.
When the On-Line Registration screen
appears, follow the on-screen instructions.
Click Next.
If you do not want to set your machine as the
default printer, clear the Set as Default Printer
check box, and then click Next.
When the Setup is Complete window
appears, confirm the settings, and then click
Next.
b
The following screens will appear.
• When the Software Update Setting screen
appears, choose the software update setting
you want and click OK.
• When the Brother Product Research and
Support Program screen appears, select
your preference and follow the on-screen
instructions.
NOTE
• Internet access is required for the software
update and the Brother Product Research and
Support Program.
• When you install MFL-Pro Suite, Brother Help
will also be installed automatically. Brother
Help allows you to access the Brother
Solutions Center when you double-click
the task tray.
Finish
in
The installation is now
complete.
Windows® Macintosh
USB
h
The installation will continue automatically.
The installation screens appear one after
another.
installation, double-click
(Brother Utilities)
on the desktop, and then click the drop-down list
and select your model name (if not already
selected). Click Tools in the left navigation bar,
and then click Installation Diagnostics.
9
USB
To install optional applications:
Now go to
Page 21
NOTE
Windows® 8 users: If the Brother manuals are in
PDF format, use Adobe® Reader® to open them.
If Adobe® Reader® is installed on your computer
but you cannot open the files in Adobe ® Reader®,
change the file association for PDF (see How to
open a PDF file in Adobe® Reader®
(Windows® 8) on page 23).
10
Windows®
USB
Macintosh
For Macintosh USB interface users (Mac OS X v10.7.5, 10.8.x, 10.9.x)
11
Before you install
b
Make sure your machine is connected to the power
and your Macintosh is ON. You must be logged on
with Administrator rights.
NOTE
For Mac OS X v10.7.0 to 10.7.4 users, upgrade to
Mac OS X v10.7.5 - 10.9.x.
12
Connect the USB cable
c
NOTE
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
• Connect the machine directly to your
Macintosh.
a
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
d
1
Windows® Macintosh
USB
IMPORTANT
3
2
CAUTION
Be careful not to pinch your fingers when the
scanner cover closes.
11
USB
13
a
b
Install the drivers
Put the CD-ROM into your CD-ROM drive.
Double-click the Driver Download icon.
Internet access is required.
Follow the on-screen instructions to continue
the installation.
If you do not have a CD-ROM drive, download
the software at
http://solutions.brother.com/mac.
Finish
12
The installation is now
complete.
Macintosh
For Wireless Network Users
For wireless network interface users (DCP-T500W/T700W)
11
Before you begin
NOTE
If you have previously configured the wireless settings of the machine, you must reset the network settings
before you can configure the wireless settings again.
On your machine, press Menu.
Press a or b to choose 3.Network. Press OK.
Press a or b to choose 0.Network Reset. Press OK.
Press a twice to accept the change.
NOTE
To set up your machine in Ad-hoc mode (connected to a wireless-capable computer without an access
point/router), see instructions in the Software and Network User’s Guide.
To download the Software and Network User’s Guide, visit at http://solutions.brother.com/manuals and go to
your model’s Manual page.
12
Choose your wireless setup method
The following instructions will offer three methods for setting up your Brother machine on a wireless network. If
you began the wireless setup from step 9 on page 6, go to method b or c. For all other users, choose the method
you prefer for your environment.
Method a is the recommended way to connect (Windows® or Macintosh).
a
Setup using the CD-ROM (Windows® and Macintosh)
• We recommend using a computer wirelessly connected to your network for this method.
• A USB cable might be needed in some cases.
Now go to
page 15
Wireless Network
13
For Wireless Network Users
b
Manual setup from the control panel using the Setup Wizard (Windows®, Macintosh and
mobile devices)
If your wireless access point/router does not support WPS (Wi-Fi Protected Setup™) or AOSS™,
write down the wireless network settings of your wireless access point/router in the area below.
If you need assistance during setup and want to contact Brother customer service, make sure
you have your SSID (Network Name) and Network Key ready. We cannot assist you in locating
this information.
Item
Record the current wireless network settings
SSID (Network Name)
Network Key*
* The Network Key may also be described as the Password, Security Key or Encryption Key.
NOTE
If you do not know this information (SSID and Network Key), you cannot continue the wireless
setup.
How can I find this information?
1) Check the documentation provided with your wireless access point/router.
2) The initial SSID could be the manufacturer’s name or the model name.
3) If you do not know the security information, please consult the router manufacturer, your system
administrator, or your Internet provider.
Now go to
c
One-push setup using WPS or AOSS™ (Windows ®, Macintosh and mobile devices)
Use this method if your wireless access point/router supports automatic wireless (one-push) setup
(WPS or AOSS™).
Now go to
14
page 16
page 17
For Wireless Network Users
13
Setup using the CD-ROM
f
Your machine will now try to connect to your
wireless network. It may take a few minutes.
(Windows® and Macintosh)
Wireless setup is now complete.
For Macintosh Users:
Download the latest software at
http://solutions.brother.com/mac.
Double-click Start Here OSX. Select Wireless
installation and follow the Wireless Device
Setup instructions on your computer screen.
For Windows® Users:
a
To install MFL-Pro Suite
For Windows® users:
Now go to
Step 15-e on page 18
Put the CD-ROM into your CD-ROM drive. If
the model name screen appears, choose your
machine. If the language screen appears,
choose your language.
NOTE
If the Brother screen does not appear
automatically, go to Computer (My Computer).
(For Windows® 8: click the
(File Explorer)
icon on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then
double-click start.exe.
b
c
d
Click Install MFL-Pro Suite and click Yes if
you accept the license agreements.
Choose Wireless Network Connection, and
then click Next.
When the Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended), and then click Next.
If you are not using the Windows® Firewall, see
the instructions provided with your firewall
software for information on how to add the
following network ports.
e
Wireless Network
 For network scanning, add UDP port 54925.
 If you still have trouble with your network
connection, add UDP ports 137 and 161.
Follow the on-screen instructions to set up the
Brother machine.
15
For Wireless Network Users
13
a
b
c
d
Manual setup from the
control panel using the
Setup Wizard (Windows®,
The letters appear in this order: lower case, upper
case, numbers and then special letters.
Macintosh and mobile devices)
If you began the wireless setup from step 9 on
page 6, press a or b to choose 1.Setup
Wizard and press OK.
Then go to c.
All other users go to b.
On your machine, press Menu.
Press a or b to choose 3.Network. Press OK.
Press a or b to choose 3.Setup Wizard.
Press OK.
When WLAN Enable? is displayed, press a
(Yes) to accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
The machine will search for available SSIDs. It
will take several seconds to display a list of
available SSIDs.
If a list of SSIDs is displayed, press a or b to
choose the SSID you wrote down in step 12-b
on page 14. Press OK.
If the machine asks you to enter a Network
Key, go to e.
Otherwise, go to f.
NOTE
• If the list is blank, check that the wireless
access point/router has power and is
broadcasting the SSID. Move your machine
closer to the wireless access point/router and
try starting from b again.
• If your access point is set to not broadcast the
SSID, you will have to manually add the SSID
name. For more information, see the Software
and Network User’s Guide.
e
NOTE
Enter the Network Key you wrote down in
step 12-b on page 14 using the a, b keys to
choose each letter or number.
Use the Enlarge/Reduce or Number of
Copies key to move the cursor left or right.
(For more information, see Entering Text for
Wireless Settings on page 22.)
Press OK when you have entered all the
characters, then press a (Yes) to apply your
settings.
f
Your machine will now try to connect to your
wireless network. It may take a few minutes.
When Press OK Key appears on the LCD,
press OK.
Wireless setup is now complete.
NOTE
For mobile device users:
• Connect your mobile device to a wireless
access point/router using a Wi-Fi® connection.
• Download and install Brother iPrint&Scan
(Android™/iOS/Windows® Phone) from your
mobile device’s application download site.
• To download the User’s Guide for the
application you are using (Brother
iPrint&Scan), visit the Brother Solutions Center
at http://support.brother.com and click Manuals
on your model’s page.
To install MFL-Pro Suite, continue to
step 14.
For Windows® users:
Now go to
Page 18
For Macintosh users:
Now go to
Page 20
For example, to enter the letter a, press the
a key once. To enter the number 3, hold down
the a key until it appears.
16
For Wireless Network Users
13
a
b
c
One-push setup using
WPS or AOSS™ (Windows®,
Macintosh and mobile devices)
Confirm your wireless access point/router has
the WPS or AOSS™ symbol as shown below.
Place the Brother machine within range of your
WPS or AOSS™ access point/router. The
range may differ depending on your
environment. Refer to the instructions provided
with your access point/router.
If you began the wireless setup from step 9 on
page 6, press a or b to choose 3.WPS/AOSS
and press OK.
Then go to d.
All other users go to c.
On your machine, press Menu.
Press a or b to choose 3.Network.
Press OK.
Press a or b to choose 4.WPS/AOSS.
Press OK.
d
When WLAN Enable? is displayed, press a
(Yes) to accept.
This will start the wireless setup wizard.
NOTE
For mobile device users:
• Connect your mobile device to a wireless
access point/router using a Wi-Fi connection.
• Download and install Brother iPrint&Scan
(Android™/iOS/Windows® Phone) from your
mobile device’s application download site.
• To download the User’s Guide for the
application you are using (Brother
iPrint&Scan), visit the Brother Solutions Center
at http://support.brother.com and click Manuals
on your model’s page.
To install MFL-Pro Suite, continue to
step 14.
For Windows® users:
Now go to
Page 18
For Macintosh users:
Now go to
Page 20
NOTE
If your wireless access point/router supports
WPS, you can also configure your machine using
the PIN (Personal Identification Number) Method.
uuSoftware and Network User’s Guide
e
Press the WPS or AOSS™ button on your
wireless access point/router (for more
information, see the instructions provided with
your wireless access point/router).
Wireless Network
This feature will automatically detect which
mode (WPS or AOSS™) your wireless access
point/router uses to configure your machine.
When Press OK Key appears on the LCD,
press OK.
Wireless setup is now complete.
17
Wireless Network
Windows®
Install the drivers and software
(Windows® XP Home/XP Professional/Windows Vista®/Windows® 7/Windows® 8/Windows® 8.1)
14
Before you install
e
NOTE
• If your machine is not found over the network,
confirm your settings by following the
on-screen instructions. If you encounter this
failure, go to step 12-b on page 14 and set up
the wireless connection again.
Make sure that your computer is ON and you are
logged on with Administrator rights.
15
a
Install MFL-Pro Suite
Put the CD-ROM into your CD-ROM drive. If
the model name screen appears, choose your
machine. If the language screen appears,
choose your language.
NOTE
If the Brother screen does not appear
automatically, go to Computer (My Computer).
(File Explorer)
(For Windows® 8: click the
icon on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then
double-click start.exe.
b
c
d
Click Install MFL-Pro Suite and click Yes if
you accept the license agreements.
Choose Wireless Network Connection, and
then click Next.
When the Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended), and then click Next.
If you are not using the Windows® Firewall, see
the instructions provided with your firewall
software for information on how to add the
following network ports.
 For network scanning, add UDP port 54925.
 If you still have trouble with your network
connection, add UDP ports 137 and 161.
18
Choose your machine from the list, and then
click Next.
• If you are using WEP and the LCD displays
Connected but your machine is not found on
the network, make sure you entered the WEP
key correctly. The WEP key is case-sensitive.
f
g
h
i
j
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
If the Environmental Advice for Imaging
Equipment screen appears, click Next.
When the On-Line Registration screen
appears, follow the on-screen instructions.
Click Next.
If you do not want to set your machine as the
default printer, clear the Set as Default Printer
check box, and then click Next.
When the Setup is Complete window
appears, confirm the settings, and then click
Next.
Wireless Network
16
a
To install optional applications:
Finish and restart
Now go to
Page 21
Click Finish to restart your computer. After
restarting the computer, you must log on with
Administrator rights.
NOTE
If an error message appears during the software
installation, double-click
(Brother Utilities)
on the desktop, and then click the drop-down list
and select your model name (if not already
selected). Click Tools in the left navigation bar,
and then click Installation Diagnostics.
b
Windows®
NOTE
Windows® 8 users: If the Brother manuals are in
PDF format, use Adobe® Reader® to open them.
If Adobe® Reader® is installed on your computer
but you cannot open the files in Adobe® Reader®,
change the file association for PDF (see How to
open a PDF file in Adobe® Reader®
(Windows® 8) on page 23).
The following screens will appear.
• When the Software Update Setting screen
appears, choose the software update setting
you want and click OK.
• When the Brother Product Research and
Support Program screen appears, select
your preference and follow the on-screen
instructions.
NOTE
• Internet access is required for the software
update and the Brother Product Research and
Support Program.
• When you install MFL-Pro Suite, Brother Help
will also be installed automatically. Brother
Help allows you to access the Brother
Solutions Center when you double-click
the task tray.
Finish
in
The installation is now
complete.
Windows®
Macintosh
Wireless Network
19
Wireless Network
Install the drivers and software (Mac OS X v10.7.5, 10.8.x, 10.9.x)
14
Before you install
Make sure your machine is connected to the power
and your Macintosh is ON. You must be logged on
with Administrator rights.
NOTE
For Mac OS X v10.7.0 to 10.7.4 users, upgrade to
Mac OS X v10.7.5 - 10.9.x.
15
a
b
Install the drivers
Put the CD-ROM into your CD-ROM drive.
Double-click the Driver Download icon.
Follow the on-screen instructions to continue
the installation.
A USB cable may be needed in some cases.
If you do not have a CD-ROM drive, download
the software at
http://solutions.brother.com/mac.
Finish
20
The installation is now
complete.
Macintosh
Install Optional Applications
1
Windows®
Install optional
applications
You can install the following applications.
BookScan&Whiteboard Suite supported
by Reallusion, Inc
Homepage Print 2* supported by
CORPUS
* This application supports Microsoft® Internet Explorer®
7.0/8.0 and Firefox® 3.
NOTE
• The machine must be ON and connected to the
computer.
• Some applications require Internet access.
• Make sure you are logged on with
Administrator rights.
• These applications are not available for
Windows Server® 2003/2008/2012 series.
a
b
c
d
Open the top menu again by ejecting and then
reinserting the CD-ROM or by double-clicking
the start.exe program from the root folder, and
then choose your machine. If the language
screen appears, choose your language.
The CD-ROM Top Menu will appear. Click
Additional Applications.
Click the button for the application you want to
install.
When installation is complete, click the button
for the next application you want to install.
To exit, click Exit.
NOTE
To start BookScan&Whiteboard Suite,
double-click the shortcut icon on your desktop.
To start Homepage Print 2, click
(Start) >
All Programs > Homepage Print 2 > Homepage
Print 2.
Windows® 8: Move your mouse to the lower right
corner of your desktop. When the menu bar
appears, click Start > Homepage Print 2.
Windows® 8.1: Move your mouse to the lower left
corner of the Start screen and click
. When
the Apps screen appears, click Homepage Print
2.
21
For Network Users
Reset the network settings to factory default
To restore all network settings of the internal Print/Scan server to the factory default, please follow the steps below:
a
b
c
d
e
f
g
Make sure the machine is idle.
Press Menu.
Press a or b to choose 3.Network.
Press OK.
Press a or b to choose 0.Network Reset.
Press OK.
Press a to choose Reset.
Press a to choose Yes.
The machine will restart, and the reset is complete.
Entering Text for Wireless Settings
Press a or b repeatedly to select a character from the list below:
abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
(space)!"#$%&'() +,-./:;<=>?@[\]^_`{|}~
Press Enlarge/Reduce or Number of Copies to move the cursor left or right.
NOTE
Making corrections
If you entered an incorrect letter and want to change it, press Enlarge/Reduce or Number of Copies to
position the cursor under the incorrect letter. Use a and b to change to the correct letter, then press Number
of Copies repeatedly to move the cursor back to the end of the text. If you press Stop/Exit, all letters above
and to the right of the cursor will be deleted.
22
Other Information
How to open a PDF file in Adobe®
Reader® (Windows® 8)
a
b
c
d
Move your mouse to the lower right corner of
your desktop. When the menu bar appears,
click Settings, and then click Control Panel.
Brother CreativeCenter
Get inspired. If you’re using Windows®, double-click
the Brother CreativeCenter icon
on your
Click Programs, click Default Programs, and
then click Associate a file type or protocol
with a program.
desktop to access our FREE website with many ideas
and resources for personal and professional use.
Select .pdf, and then click the Change
program... button.
Mac users can access Brother CreativeCenter at
http://www.brother.com/creativecenter.
Click Adobe Reader. The icon next to .pdf
changes to the ‘Adobe Reader’ icon.
Adobe® Reader® is now the default application
for reading .pdf files until you change this file
association.
23
Trademarks
Microsoft, Windows, Windows Vista, Windows Server and Internet Explorer are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Apple, Macintosh, Mac OS and OS X are trademarks of Apple Inc., registered in the United States and other countries.
Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
AOSS is a trademark of Buffalo Inc.
Wi-Fi and Wi-Fi Protected Access are registered trademarks of the Wi-Fi Alliance.
WPA, WPA2, Wi-Fi Protected Setup and Wi-Fi Protected Setup logo are trademarks of the Wi-Fi Alliance.
Android is a trademark of Google Inc. Use of this trademark is subject to Google Permissions.
Firefox is a registered trademark of the Mozilla Foundation.
Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs.
Any trade names and product names of companies appearing on Brother products, related documents and any other
materials are all trademarks or registered trademarks of those respective companies.
Compilation and Publication
Under the supervision of Brother Industries, Ltd., this manual has been compiled and published, covering the latest product descriptions and
specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for
any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other
errors relating to the publication.
Copyright and License
©2015 Brother Industries, Ltd. All rights reserved.
This product includes software developed by the following vendors:
©1983-1998 PACIFIC SOFTWORKS, INC. ALL RIGHTS RESERVED.
©2008 Devicescape Software, Inc. All rights reserved.
This product includes the “KASAGO TCP/IP” software developed by ZUKEN ELMIC,Inc.
www.brotherearth.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising