Cyncra MVP Series Parts Manual
 PARTS MANUAL
Gen 2 / Cyncra 2016 / MVP / MVP Hydra - Rev 2015.5
Last Revision: Nov 13, 2015 3 Group MVP 3 Group
Cyncra 2016 5610 4th Ave S. / Sea le, WA 98108—USA
Tel: +1 206 764 0600 / Fax: +1 206 764 0601
Ordering Parts: parts@synesso.com
Informa on: info@synesso.com
www.synesso.com
Table of Contents
Sec on
Pages
Body Panels, MVP 2 Body Panels, MVP & MVP Hydra Fasteners Water Inlet, Right Side Water Outlet, Le Side / Brew Tank Drain Assemblies 3 4 5 Part Numbers & Descrip ons for MVP Series Parts, Wood Packages Side Panel Drawings, MVP & MVP Hydra 6‐7 8 Side Panel Assemblies, MVP & MVP Hydra 9 4 Magnet Flowmeters, MVP & MVP Hydra Flowmeter Assemblies Group Tops, Handles, Actuator, Shot Timer, “S” Logo, Leg Assembly, Display Controller Tech Bulle n for New Display Controller 10 11 12 13 Body, Gen 2 Group Tops, Actuators 14‐16 17‐19 Hydraulic System 20‐24 Sight Glass 25 Pumps & Motors Electronics, Gen 2 Portafilters & Baskets Parts & Kits (Electrical Box on Page 35) 26‐27 28‐29 30 31‐35 Wood Packages Retrofit Kits Steam & Brew Tank Water Control Valve Kits, Switches 36‐37 38‐40 41 Drain Manifold & Electronics, Gen 1 Electronics Op ons & Accessories 42‐43 Line Pressure Boost System Shot Mirrors 44 45 Cup Riser for Drip Tray Trim Kits Breaker Blocker Posts / Foot & Leg Stabilizer Gen 1 & 2, Cyncra 45 46 46 T‐Shirts / Shot Glasses MVP Series Log Book 47 48 Body ‐ MVP 3.8015 ‐ Bolt, Polished 1.7235 ‐ 3 Gp Safari Rack, Cup Rail 1.1941 ‐ Inner Bearing Plate, Le Side 1.2316 ‐ Piezo Hot Water Tap Switch 1.1659 ‐ Group Top (Deco) Handle 1.8131 ‐ Bolt 1.1943 Outer Trim, Le Side 1.1014 Group Top 1.1945 ‐ Lower Side, Le Side 1.1996 ‐ 4” Legs 2.3529 ‐ Display Controller 1.1353 ‐ Upper Back Panel 1.1703_3 Black Grill 1.1733 Logo Mirror Panel 1.1713 ‐ Lower Back Panel 1.1723 ‐ Inner Back Brushed Panel 1.7579_3 ‐ Op onal Trim, 3 Sided Base, #8 Polished Finish, SS 2 Body ‐ MVP Hydra with Black Nickel Accents 3.8016 ‐ Bolt, Black Nickel 1.7256 ‐ 1 Gp, Safari Rack, Cup Rail, Black Nickel 1.8131 ‐ Bolt, Polished 1.1659 ‐ Group Top Handle 1.1016 ‐ Group Top, Black Nickel 1.1955 ‐ Outer Trim, Black Nickel, Le Side 2.3729 ‐ Display Controller The 1 Group MVP Hydra is sold with the 4” Synesso “S” Logo and not the “Synesso” name plate. MVP Series Fasteners
1.1701_1 Black Grill Polished Stainless Steel Black Nickel 1.1782 ‐ Synesso “S” Logo, 4” Cast & Polished 1.8131 3.8020 3.8015 3.8021 3.8016 Side Panel Group Top Safari Rack Group Top Safari Rack MVP Series MVP MVP MVP Hydra MVP Hydra 3 Major Components, Water Inlet (Right Side)
1.3373 ‐ Brew Gauge 1.4262 ‐ Vacuum Breaker 1.2441 ‐Hot Water Valve MVP 3 Group, Water Inlet (Right Side) Oct 2015
Ball Valve, Steam Valve Shutoff 2.3601 ‐ Solenoid Switch, Standard (Solenoid) 1.3261 ‐ Black Drain Tube from brew tanks 1.5441 ‐ Ball Valve, Steam Tank Drain 1.1641 ‐ Drain Box 1.4070 ‐ Expansion 1.5080 ‐ Mix Valve Valve for Hot Water Tap 1.4381 ‐ Pressure Relief Valve under the Buna (yellow) hose, 8.5” 2.3602 ‐ Solenoid Switch, Hot/Cold Water 1.4290 ‐ Steam Inlet Check Valve 1.2441 ‐ Steam Tank Water Inlet Valve (Solenoid) 1.2441 ‐ Cold 1.4290 ‐ Water Valve Brew Tanks (Solenoid) Check Valve 1.5070 ‐ 84” Steam Tank Fill Hose ‐ Pink MVP Hydra 3 Group,
Water Inlet (Right
Side) Oct 2015
1.3310 ‐
Drain Hose, 3/4” OD, Sold by the Foot 1.4070 ‐Expansion Valves (1 per Group) 4 Major Components, Water Outlet (Le Side)
MVP or MVP Hydra ‐ Oct 2015
1.5351 ‐ Steam Gauge Tube 1.2490 ‐ Ther‐
mal Overload Switches for Steam Tank 1.4111 ‐ High Water Level Probe 1.4112 ‐ Low Water Alarm Probe 1.4082 ‐
Steam Gauge Temperature Probe 1.5450 ‐ Steam Shut Off Valve Tubes, Valve, Fi ngs Steam Tank to Gauge 1.3133 ‐ Brew Tank, No Fi ngs (Not Shown ‐ Pressure gauge tube MVP Hydra only) 1.5445 ‐ Brew Tank Drain Tube Steam Tank Hea ng Element & 1.2010 Gasket *Black Element Guard not Shown 2nd Posi on Brew 1st Posi on Brew Tank Fill Tube Tank Fill Tube 3rd Posi on Brew * Contact Synesso for Tank Fill Tube Tube Part Numbers Brew Tank Drain Assemblies
1.5443 ‐ Brew Tank Drain, Single Cap (For Hydra Gauge Tube) 1.5445 ‐ Brew Tank Drain, Dual Cap MVP Series Wood Packages ‐ Includes Portafilter & Steam Handles + Tamper.
(Group Top Handles are powder coated black un l further no ce)
Bubinga Maple Black Walnut Zebra 1 group # 2.7160_1 # 2.7170_1 # 2.7180_1 # 2.7190_1 2 group # 2.7160_2 # 2.7170_2 # 2.7180_2 # 2.7190_2 3 group # 2.7160_3 # 2.7170_3 # 2.7180_3 # 2.7190_3 5 MVP & MVP Hydra Body Panels and Parts
#8 ‐ refers to a #8 Mirror polish on stainless steel / #4 ‐ refers to a #4 Brushed polish on stainless steel
SS ‐ means Stainless Steel / Gp ‐ means Group Top / Ga. ‐ refers to gauge or thickness of panel
Part #
Descrip on
1.1016 Group Top, MVP Hydra, Black Nickel Plated, Handle Not Included (2015) 1.1045 Group Top Housing MVP Series [Skirt], (2015) 1.1046 Group Top Mount Plate, MVP Series, (2015) 1.1135 Group Top Housing, Hall Effect, MVP Series (2015) 1.1140 Group Top Actuator Only, MVP Series (Sell w Bearing 1.3241)(2015) 1.1351 Panel, Upper Back, 1 Group, #8 SS, MVP Series (2015) 1.1352 Panel, Upper Back, 2 Group, #8 SS, MVP Series (2015) 1.1353 Panel, Upper Back, 3 Group, #8 SS, MVP Series (2015) 1.1659 Group Top Handle, Deco, Black, MVP Series (2015) 1.1701_1 Panel, Black Powder Coated, Back Grill, 1 Gp, MVP Series (2015) 1.1702_2 Panel, Black Powder Coated, Back Grill, 2 Gp, MVP Series (2015) 1.1703_3 Panel, Black Powder Coated, Back Grill, 3 Gp, MVP Series (2015) 1.1711 Panel, Back, Lower, #8 SS,1 Group, MVP Series (2015) 1.1712 Panel, Back, Lower, #8 SS, 2 Group, MVP Series (2015) 1.1713 Panel, Back, Lower, #8 SS, 3 Group, MVP Series (2015) 1.1721 Panel, Back, Inner, #8 SS, 1 Group, MVP Series (2015) 1.1722 Panel, Back, Inner, #4 SS, 2 Group, MVP Series (2015) 1.1723 Panel, Back, Inner, #4 SS, 3 Group, MVP Series (2015) 1.1732 Panel, Back, Synesso Logo, #8 SS, 2 Group, MVP Series (2015) 1.1733 Panel, Back, Synesso Logo, #8 SS, 3 Group, MVP Series (2015) 1.1782 Synesso "S" Logo, 4" Diameter, Cast & Polished (2015) 1.1853 Panel, Upper Front, 1 Gp, Timer Control, Mirror Polish, Stainless Steel, (2015) 1.1866 Panel, Upper Front, 2 Gp, Timer Control, Mirror Polish, Stainless Steel, (2015) 1.1867 Panel, Upper Front, Hydra 2 Gp, Timer Control, Mirror Polish, Stainless Steel, (2015) 1.1906 Panel, Upper Front, 3 Gp, Timer Control, Mirror Polish, Stainless Steel, (2015) 1.1907 Panel, Upper Front, Hydra 3 Gp, Timer Control, Mirror Polish, Stainless Steel, (2015) 1.1941 Side Panel, MVP Top Inner Bearing Plate, LH, 12 Ga. #4 (2015) 1.1942 Side Panel, MVP Top Inner Bearing Plate, RH, 12 Ga. #4 (2015) 1.1943 Side Panel, MVP Outer Trim, LH, 12 Ga. #8 (2015) 1.1944 Side Panel, MVP Outer Trim, RH, 12 Ga. #8 (2015) 1.1945 Side Panel, MVP Series, Lower LH, 12 Ga. #4 (2015) 1.1946 Side Panel, MVP Series, Lower RH, 12 Ga. #4 (2015) 1.1951 Side Panel, MVP Hydra, Top Outer, LH, 14 Ga. #8 (2015) 1.1952 Side Panel, MVP Hydra, Top Outer, RH, 14 Ga. #8 (2015) 1.1995 Leveling Adjustable Leg Base, 1 3/4" Diameter, MVP Series (2015) 1.1996 Leg, Adjustable 4", NSF compliant, MVP Series, (2015) 1.2190 Snubber Only, *Order 4.2780 Snubber Assembly with Terminals (2015) 6 MVP & MVP Hydra Body Panels and Parts
1.2485 Spacer for Paddle Shi er, Brass, MVP Series(2015) 1.2534 Overlay for Display Controller, 6 Key Membrane Switch, (2015) 1.7075 MVP Series Log Book (2015) ‐ See Page 48 1.7235 Safari Rack, Cup Rail Tube, 3 Group, MVP (2015) 1.7236 Safari Rack, Cup Rail, Black Nickel Plated, 3 Gp, MVP Hydra, (2015) 1.7245 Safari Rack, Cup Rail, Tube 2 Gp, MVP (2015) 1.7246 Safari Rack, Cup Rail, Black Nickel Plated, 2 Gp, MVP Hydra, (2015) 1.7256 Safari Rack, Cup Rail, Black Nickel Plated, 1 Gp, MVP Hydra, (2015) 1.7579_1 Trim, 3 Sided Base, 1 Gp, Stainless Steel, #8 Finish (2015) 1.7579_2 Trim, 3 Sided Base, 2 Gp, Stainless Steel, #8 Finish (2015) 1.7579_3 Trim, 3 Sided Base, 3 Gp, Stainless Steel, #8 Finish (2015) 1.7877 Line Pressure Boost w/ Pressure Regulator, MVP (2015) 1.7878 Line Pressure Boost w/ Pressure Regulator, MVP Hydra (2015) 1.8131 Bolt, MVP Series, Side Panel, 3/4” Hex Head Cap, Polished (2015) 2.1141 Panel, Top Inner Side, Black Nickel Plated Bearing Plate, MVP Hydra, LH (2015) 2.1142 Panel, Top Inner Side, Black Nickel Plated Bearing Plate, MVP Hydra, RH (2015) 2.1143 Panel, Side, Black Nickel Plated Trim Plate, MVP Hydra, LH (2015) 2.1144 Panel, Outer Trim Side, Black Nickel Plated Trim Plate, MVP Hydra, RH (2015) 2.1157 Panel, Upper Inner Side, Black Nickel Plated Trim Plate, MVP Hydra, RH, 1 Gp (2015) 2.1158 Panel, Outer Trim Side, Black Nickel Plated Trim Plate, MVP Hydra, 1 Gp, LH (2015) 2.3022 Keypad / Bu on Pad Assembly, Includes Adapter & Jumper (2015) 2.3054 Flowmeter Assembly, Sabre and MVP, 4 Magnet, (Sept 2015) 2.3055 Flowmeter Assembly, MVP Hydra , 4 Magnet (2015) 2.3057 Flowmeter 4 Magnet ‐ POST Serial #307152754 & all MVP models (No Fi ngs) (2015) 2.3523 Shot Timer Control Board with Electronics (2015) 2.3524 Hall Effect Board, MVP Series (2015) 2.3527 Stainless Steel Retainer for Timer Control (2015) 2.3529 Digital Shot Timer & Control w/ Housing, MVP Series (2015) *[Sell 2.3529 with 1.6160 Black Mask Installed for Cyncra 2016] 2.3709 Bumpers for Display Box, Black, Urethane (2015) 2.3720 Handheld Display/Controller (Board Only 2015) 2.3729 Display Board, Housing, Overly & Cable (2015) ‐ Complete Replacement Part 2.3801 Main Electronics Board, Programmed for MVP Series, No Wires (2015) *[ Sell 2.3800 for Gen 2 & Cyncra 2016 So ware Board] 3.8015 Bolt, Side Panel, Polished Stainless, MVP (2015) 3.8016 Bolt, Side Panel, Black Nickel, MVP Hydra (2015) 3.8020 Bolt, Group Top, Polished Stainless, MVP (2015) 3.8021 Bolt, Group Top , Black Nickel, MVP Hydra (2015) 7 Body ‐ Side Panels, MVP & MVP HYDRA
MVP Hydra
Top Outer Panel
#8 Mirror Finish Le Side ‐ 1.1951 Right Side ‐ 1.1952 MVP Hydra
Inner Bearing Plate
Black Nickel Finish Le Side ‐ 2.1141 Right Side ‐ 2.1142 MVP
Inner Bearing Plate
#4 Brushed Stainless Le Side ‐ 1.1941 Right Side ‐ 1.1942 MVP Hydra
Outer Trim Plate
Black Nickel Finish Le Side ‐ 2.1143 Right Side ‐ 2.1144 MVP
Outer Trim Plate
#8 Mirror Finish Le Side ‐ 1.1943 Right Side ‐ 1.1944 MVP Hydra
Outer Trim Plate ‐ 1 Gp
Black Nickel Finish Right Side ‐ 2.1158 MVP Hydra & MVP
MVP Hydra & MVP
#4 Brushed Stainless Lower Le Side ‐ 1.1945 #4 Brushed Stainless Lower Right Side ‐ 1.1946 8 Body ‐ MVP Series
MVP Inner Bearing Plate #4 Brushed Stainless Right Side ‐ 1.1942 MVP & MVP Hydra Lower Side Panel #4 Brushed Stainless Right Side ‐ 1.1946 Sell with Bearing Pressed In ‐ 1.3241 1.1954 ‐ Inner bearing Plate, Resides behind 1.1952 1.1952 1.1942 1.1944 1.1956 Upper Top 2 Panels for MVP, Right Side 1.1942 ‐ Inner Bearing Plate, #4 Brushed Stainless 1.1944 ‐ Trim Plate, MVP, #8 Polished Stainless Upper Top 3 Panels for MVP Hydra, Right Side 1.1952 ‐ Top Outer Plate, #8 Polished Stainless 1.1954 ‐ Inner Bearing Plate, Black Nickel Plated 1.1956 ‐ Trim Plate, MVP Hydra, Black Nickel 1.1942 1.1952 1.1944 1.1954 9 Flowmeter Configura ons for MVP and MVP Hydra
MVP & MVP Hydra use a 4 Magnet Flowmeter 2.3057 ‐ Flowmeter 4 Magnet 2.3057 NOT Interchangeable w Gen 2 Sabre and Hybrid 2.3052 4 Magnet Turbine 2 Magnet Turbine 2 Magnet Flowmeters are used on Gen 2 Sabre and on the Volumetric Groups on Gen 2 Hybrid. 2.3054 ‐ MVP Flowmeter Assembly (Flowmeters and Brass Fi ngs) Copper Tubes not included in the assembly. Flowmeter Assembly, 3 Group MVP 1.4290 ‐ Check Valve, 1/4”, 1 Per Group 2.3055 ‐ MVP Hydra Flowmeter Assembly (Flowmeters and Brass Fi ngs) Copper Tubes not included in the assembly. Flowmeter Assembly, 3 Group MVP Hydra 10 1.1016 ‐ Group Top, MVP Hydra, Black Nickel Pla ng 1.1014 ‐ Group Top for All Manual Machines EXCEPT ‐ MVP Hydra 1.1659 ‐ Group Top Handle, Black 3.8020 ‐ Polished, SS, Bolt, MVP Gp Top 3.8021‐ Black Nickel Plated Bolt, MVP Hydra Gp Top 1.1045 ‐ MVP & MVP Hydra Skirt 2.3524 ‐ Hall Effect Board 1.1135 ‐ MVP & MVP Hydra Group Top Assembly with Hall Effect Board, Mount Plate, Skirt, Magnets & 1.2485 ‐ Brass Spacers 1.1046 ‐ MVP & MVP Hydra Mount Plate 1.1140 ‐ MVP & MVP Hydra Actuator, shown 11 2.3529 ‐ Board, Housing, Springs & Acrylic Cover 2.3523 ‐ Replacement Display Board ONLY. 1.1782 ‐ Synesso Logo, 4” Diameter, Cast & Polished. Comes on the back panel of 1 Gp MVP Hydra and the 2016 Cyncra MVP & MVP Hydra Legs ‐ 1.1996
Per our sanita on regula ons, machines will be shipped with the leg in a 4” Configura on A shorter leg can be configured by removing 1 of the aluminum round bar posts. 1.1996 ‐ Leg, 4” Assembly 1.8130 ‐ Bolt 1.8510 ‐ Split Washer 1.1992 ‐ Round Bar 1.8320 ‐ Set Screw 1.1992 ‐ Round Bar 1.8290 ‐ Nut 1.1993 Leg Sleeve (Cover) 1.1995 ‐ Leg Base 1.1932 ‐ Rubber Pad, 40 mm Diameter 2.3729 ‐ Complete Display Controller with Cable, 2015 1.2534 ‐ Overlay with flexible printed cir‐
cuit (Key membrane) *See Tech Bulle n on next page. 12 13 Body ‐ Gen 2
Lower Front Panel 1.4160 ‐ Steam Wand 1.1560 (3 Gp)
Upper Front Panels (Remove White Film) 1.18XX— Descrip ons on Page 6 1.1570 (2 Gp)
1.1580 (1 Gp) Side Panels 1.1973—Le Hand 1.1963—Right Hand 1.1983—1 Group Right Side Panel Knob (Thumb Screw) O‐Ring 1.6010, Washer 1.8440, Nut 1.8300 Steam Actuators: Le 2.4245 / Right 2.4235 Steam Actuator Handle 1.4253 (w/ Set Screw) Cap Nut 1.8300 Manual Gp Top 1.1014 Black Group Top Handle 1.1656 2.3022 ‐ Keypad Drip Tray (Grate) 1.1524 (3 grp) 1.1534 (2 grp) 1.1544 (1 grp) Drip Pan (Not Shown, Below Tray) 1.1523 (3 Gp) 1.1533 (2 Gp) 1.1543 (1 Gp) 2.1021 ‐ Volumetric Group Top Housing, Stainless Steel 14 Body ‐ Gen 2 Lower Back Panel 1.1680 (3 Gp) 1.1690 (2 Gp) 1.7000 (1 Gp) Upper Back Panel (Remove White Film) 1.1320 (3 Gp) 1.1330 (2 Gp) 1.1340 (1 Gp) Cup Drip Grates (per piece) 1.1441 (3 Gp) 1.1451 (2 Gp) 1.1461 (1 GP) 1.2316 ‐ Piezo Hot Water Switch , as of June 18, 2015. Replaces 1.2314 Steam Actuator Handle 1.4253 (w/ Set Screw) Cup Drip Pan (Black) 1.1481 (3 Gp) 1.1491 (2 Gp) 1.1501 1 Gp) Part #
1.1014 1.1320 1.1330 1.1340 1.1441 1.1451 1.1461 1.1481 1.1491 Stainless Steel Actuators Replaces Black Cast Handles Safari Rack Tube (Rail) 1.7231 (3 Gp) 1.7241 (2 Gp) 1.7251 91 Gp) Stainless Steel Steam Actuator w Bearing, Nut, Washer and O‐Ring Assembly 2.4245—Le Hand / 2.4235—Right Hand Descrip on
Group Top, Manual (Handle Not Included) Upper Back Panel, 3 Group, Mirror Finish Upper Back Panel, 2 Group, Mirror Finish Upper Back Panel, 1 Group, Mirror Finish Cup Grate, 3 Group, 2010 Cup Grate, 2 Group, 2010 Cup Grate, 1 Group, 2010 Cup Drip Pan, 3 Gp, Black Cup Drip Pan, 2 Gp, Black 15 Black Cast Handles are Discon nued, Replace with Stainless Steel. Body ‐ Gen 2
Part #
Descrip on
1.1501 1.1523 1.1524 1.1533 1.1534 1.1543 1.1544 1.1560 1.1570 1.1580 1.1656 1.1680 1.1690 1.1700 1.1852 1.1864 1.1865 1.1874 1.1875 1.1963 1.1973 1.1983 1.1990 1.1930 1.4161 1.6010 1.7231 1.7241 1.7251 1.8300 1.8400 1.8882 2.4235 2.4245 Cup Drip Pan, 1 Gp, Black Drip Pan 3 Gp Drip Tray (Grate) 3 Gp Drip Pan 2 Gp Drip Tray (Grate) 2 Gp Drip Pan 1 Gp Drip Tray (Grate) 1 Gp Lower Front Panel, 3 Gp Lower Front Panel, 2 Gp Lower Front Panel, 1 Gp Group Top Handle, High Gloss Black Lower Back Panel, 3 Gp, with Synesso Logo Lower Back Panel, 2 Gp, with Synesso Logo Lower Back Panel, 1 Gp, with Synesso Logo Upper Front Panel for Shot Timers, 1 Gp, Mirror Polish Upper Front Panel for Shot Timers, 2 Gp, Mirror Polish Upper Front Panel, Hydra/Hybrid, for Shot Timers, 2 Gp, Mirror Polish Upper Front Panel for Shot Timers, 3 Gp, Mirror Polish Upper Front Panel, Hydra/Hybrid, for Shot Timers, 3 Gp, Mirror Polish Side Panel, Right Hand w/ Safari Rack Integrated, 2010 (Sell w/ Bearing 1.3241) Side Panel, Le Hand w/ Safari Rack Integrated, 2010 (Sell w/ Bearing 1.3241) Side Panel, Right Hand w/ Safari Rack Integrated, 2010 Machine Legs, 4” High, Price per Leg Silicone Leg Pad, Set of 4 or 1.1931 for Single Pad Steam Wand Assembly, Cool Touch, Includes: Nut, Spool, Gasket, O‐Ring (No Tip) Side Trim O‐Ring, Black Safari Rack Tube (Rail), 3 Group Machines, 2010 & Newer Safari Rack Tube (Rail), 2 Group Machines, 2010 & Newer Safari Rack Tube (Rail), 1 Group Machines, 2010 & Newer Acorn Cap Nut (Group Top and Side Panels) Stainless Steel Washer for Cap Nut Side Panel Knob (Thumb Screw), Black w/ O‐Ring & Threaded Rod Steam Actuator, Right Hand, Stainless Steel, Bearing & Hardware (No Handle) Steam Actuator, Le Hand, Stainless Steel, Bearing & Hardware (No Handle) 16 Manual Group Top
1.1014 1.8300 1.8290 1.8440 1.2175 (Reed Switches) 1.1028 (Wrapped) Group Tops ‐ Gen 2
1.1656—Gp Top Handle 1.1040 + (1.3241 Bearing, Nuts & screws) 1.8110— For Bayonet 1.1028—Wraps into Housing (Skirt) 1.8500— Split Lock Washer 1.1040 1.1026 1.1024 1.3381 Volumetric Group Top
2.1021 2.3020 2.1041 1.1027 1.2311 1.1025 (wraps into Housing) Manual Group Top Parts As of February 2015 ‐ 1.1026, Magnet Plate, is no longer needed. 1.1040 Actuator has been redesigned. 3.1020 1.1022 Group Top Support, Used on Manual and Volumetric 17 1.1040 ‐ Redesigned Actuator to Eliminate the Magnet Plate 1.1026. February 2015 Group Tops ‐ Gen 1 & Gen 2
Manual Group Top Actuator Progression
Machines with these style of Group Tops use Gen 1 Electronics Original Style—No longer available. Replace en re Group Top with 1.1035 Machines with this style of Group Top use Gen 2 Electronics Replace with 1.1029 Actuator Only with Newer Style 1.1029 1.1029 ‐ Newer Actuator 1.1040 ‐ Actuator Only Use with Roller Switches, Use with Reed Switches Magne c Detents Manual Group Top Replacement Assemblies
1.1035 ‐ Gen 1 Replacement Replacement Group Top complete with Roller Switches (1.2170) for machines manufactured between 2004 and 2011 with Gen 1 Electronics 1.1027 Not Included 1.3235 1/4” Post, Serial # 0001 to ~ 0300 (July 2004 to July 2007) 1.3232 1/2” Post, Serial # ~0300 to Present 1.1031 Replacement Group Top complete with Reed Switches (1.2175) for ma‐
chines manufactured 2011 moving forward with Gen 2 Electronics 1.2175 Reed Switches 18 Group Tops ‐ Gen 1 & Gen 2
Part #
1.1014 1.1022 1.1024 1.1025 1.1026 1.1027 1.1028 1.1029 1.1031 1.1035 tronics 1.1040 1.1656 1.2170 1.2175 1.2311 1.3381 1.8110 1.8290 1.8300 1.8440 1.8500 2.1021 2.1041 2.3020 Descrip on
Group Top, Manual, Polished (Handle not Included) 1.2170 ‐ Cherry Roller Switch for Gen 1 Group Tops. Group Top Housing Support Group Top Mount Plate, Manual Group Top Housing (Skirt) Volumetric Group Top Magnet Clamp Plate, Manual Group Top Cover Plate Group Top Housing (Skirt) Manual Group Top Actuator (Sell with Bearing 1.3241) Group Top Housing Complete, Reed Switches—Gen 2 Electronics Group Top Housing Complete, Roller Switches—Gen 1 Elec‐
Group Top Actuator (Sell with Bearing 1.3241) Group Handle, Gloss Black Roller Switch (Cherry Roller) Group Top, Gen 1 Machines Reed Switches, Group Top Brew & Pump Switch, Sealed Hot Water and Volumetric Group Top Bayonet Ring, Stainless Steel Screws, Stainless Steel, 2.5” Long Nuts, Stainless Steel Acorn Cap Nut (Group Top and Side Panels) Stainless Steel Flat Washer, Stainless Steel Split Lock Washer, Stainless Steel Group Top Housing, Volumetric Group Top Conversion Bracket, Volumetric Keypad ( Bu on Pad) Volumetric 1.2175—Reed Switches for Manual Gp Tops 1.2175 Moun ng Hardware, if needed 1.8340 ‐ Washer, 4‐40 1.8350 ‐ Nut, 4‐40 1.8390 ‐ Screw, 4‐40 Manual Group Top Actuator: 1.1040 ‐ Evolu onary Change as of February 2015 1.3590 ‐ Magnet for Actuator Detents Magnet Plate Version 1.3580 ‐ Magnets to Ac vate Reed Switches No Magnet Plate Needed 19 Hydraulic System
Le Side, 2 Group Machine
1.2390 1.5351 1.2490 1.4111 1.4112 1.5181 1.3821 1.3861 1.1391 1.4612 Pusher for Black Cast & Current Stainless Steel Steam Actuator Handles 1.5372 1.5231 ‐ Right Side Steam Tube Le Steam Tube 1.5232 2.5450 1.3133 1.5428 1.5445* New Config 1.5181 (2nd Gp) Le Side, 3 Group Machine
1.5422 (1st Gp) 1.5471 (3rd Gp) Part #
Descrip on
1.1391 1.2490 1.3133 1.3821 1.3861 1.4111 1.4112 1.4192 1.4611* 1.4612 1.5428 1.5181 1.5471 1.5351 1.5445* Hea ng Element Guard, Black Thermal Overload Switch, Manual Reset Brew Tank, Stainless Steel, Heat Treated, No Fi ngs Heat Shrink Tube, 1/2”, 1.5” Long Heat Shrink Tube, 3/4”, Steam Element Lower Right Post, 1.5” Long Level Probe, High Posi on, Water Level & Auto Fill Level Probe, Low Posi on, Low Water Alert Gasket, Teflon for Level Probes Steam Valve Pusher, *1st Genera on, Stainless Steel Handles (see page 24) Steam Valve Pusher, Black Cast and Current SS Handles (see page 24) Copper Tube, 1/4”, 1st Group, Water Inlet from Steam Tank to Brew Tank (160 mm) Copper Tube, 1/4”, 2nd Group, Water Inlet from Steam Tank to Brew Tank (530 mm) Copper Tube, 1/4”, 3rd Group, Water Inlet from Steam Tank to Brew Tank (755 mm) Copper Tube, 1/4”, Steam Gauge (294 mm) Drain Valve Fi ngs Assembly, *Nov 2014—New Configura on 20 Hydraulic System
1.3373 Right Side, 2 Group Cyncra
(Brew Gauge &Fi ng) 1.5195 Je ed Hot Water Tube 1.5365 Brew Gauge Tube 1.4262 1.5432 1.5890 Sight Glass Complete, (No Copper Tubes) See page 13 1.5431 1.5440 1.5820 (2 Group) *1.5810 (1 Group) *1.5830 (3 Group) 1.5429 (Je ed Tube) 1.4390 1.4435 ‐ Steam Inlet 1.4381 1.4100 PRV (Under Hose) 2.3601 (Standard Switch) 2.3602 (Hot Water Switch) 1.5070—84” 1.4070 1.3310 1.1641 2.2430 Water Control Assembly 1.2441 1.5700 1.4290 1.5340 2.5120 1.5080 2.5100 1.5570 1.5620 Expansion Valve, Pressure Relief Valve & Vacuum Breaker 1.4070 1.4100 1.4262 1.4390 1.4381 1.4192 21 Level Probes
1.4110— Straight 1.4111— High, Level 1.4112— Low, Alarm 1.4192—O‐Ring Hydraulic System
Part #
1.1641 1.2441 1.2390 1.2591 1.3310 1.3373 1.4070 1.4100 1.4110 1.4111 1.4112 1.4192 1.4262 1.4290 1.4381 1.4390 1.4435 1.5060 1.5070 1.5080 1.5150 1.5195 1.5250 1.5340 1.5365 1.5429 1.5431 1.5432 1.5440 1.5570 1.5620 1.5700 1.5810 1.5820 1.5830 1.5890 2.3601 2.3602 2.5100 Descrip on
Drain Box, Stainless Steel & Passivated Water Control Valve, Parker ZB09 220‐230 Volts Temperature Probe, 2000 ohm, Brew & Steam Tanks (Not pictured) Temperature Probes, 100 ohm, Original Style Machines (Not pictured) Drain Hose, 3/4” (19.05 mm) OD, Priced by the Foot Brew Gauge (Plain Face) with Fi ng 1.5540 Expansion Valve with Teflon Reinforcement Pressure Relief Valve, 3/8” Level Probe, Straight, Sell with 1.4192 O‐Ring Level Probe, High Posi on, Water Level & Auto Fill, Sell with 1.4192 O‐Ring Level Probe, Low Posi on, Low Water Level Alarm, Sell with 1.4192 O‐Ring Teflon O‐Ring (Gasket) for Vacuum Breaker & Level Probes Vacuum Breaker, Stainless Steel Check Valve, 1/4” Inlet Buna Hose for Pressure Relief Valve, 8.5” Long Clamp for Buna Hose 1.4381 Steam Tank Inlet Assembly, Stainless Steel Tube & Brass Fi ngs Hose, Braided Stainless Steel, 48” Long (Not Pictured) Hose, Braided Stainless Steel, 84” Long Fi ng, Mix Valve for Tea Tap (Hot Water), 320, Spout for Hot Water Tap, Aerator Not Included (Not Pictured) Copper Tube, 1/4”, Je ed, Hot Water to Tap, 358 mm Long Aerator for Hot Water Spout (Not pictured) Fi ng, Water Control Valve Copper Tube, Brew Gauge Tube Copper Tube, 1/4”, Je ed, Steam Tank Fill, 178 mm Long Copper Tube, 3/8”, Lower Sight Glass Copper Tube, 3/8” Upper Sight Glass Ball Valve, Sight Glass Tube Fi ng, Brass Pipe Tee, 3700x4, 1/4” NPT Female Fi ng, Braided Hose Elbow Adapter, 69x6, 3/8” Compression x 1/4” Male Pipe Tapered Fi ng, Steam Tank Tube Fi ng, 48x4x4, 1/4” NPT Male x 1/4” Male Flare Copper Drain Manifold, 1 Group Machines Copper Drain Manifold, 2 Group Machines Copper Drain Manifold, 3 Group Machines Sight Glass Complete (Not Copper Tubes 1.5431 & 1.5432) (see page 25) Solenoid Switch, Standard, Wires and Moun ng Plate Solenoid Switch, Hot Water, Wires and Moun ng Plate Fi ng, Reducing Bushing, 3220x4x2, 1/8” to 1/4” 22 Hydraulic System
Plain Face Gauges, Sold with Fi ng A ached Current Style as of 2011 1.4083—Steam 0‐60 1.3373—Brew 0‐300 SS Face Gauges, Discon nued. Use Plain Face Ball Valves Temperature Probe, Brew & Steam Tanks
1.2390—2000 ohm (Current as of 3‐2007 1.2591—100 ohm (Original Machines) **These are NOT interchangeable 2000 ohm reads temp in .1 degrees F 100 ohm reads temp in .5 degrees F 1.5450— Steam Valve Shut Off 1.5440—Sight Glass Drain 2.3052—Flowmeter 2 Magnet, Green Brass, Volumetric Models Only 1.3191—Ruby Jet Kit for Brew Valve 1 of 1.3192 Synthe c Ruby Jet, .6 mm 2 of 1.7400 O‐Rings for Brew Valve 1.7400—O‐Rings 1.2460—Brew Valve, 220V, Rubi Seat, F Class 23 Hydraulic System
1.7630 Pressure Regulator, 1 Per Machine, Fi ngs will vary slightly depending upon machine 1.7635 —Single Pump Machine w/ 48” Hose 1.7636— 2 Group Hydra / Hybrid 1.7637—3 Group Hydra / Hybrid * 1.7630—Pressure Regulator Only, Lead Free Brass, NO Fi ngs or Hoses 1.4160 ‐ Steam Wand Only / 1.4161 Steam Wand Assembly (See page 31) 24 Sight Glass
1.5890—Sight Glass Complete: 1.4192 ‐ O‐Ring 1.4262 ‐ Vacuum Breaker 1.5270— Sight Glass Tube 1.5290—O‐Ring, Silicone, 2 Per 1.5300— O‐Ring, Silicone, 4 Per 1.5440— Ball Valve, Drain 1.5852— Brass Fi ng for Ball Valve 1.5856—Brass Fi ng for Tube 1.5880 * ‐ Stainless Steel Parts 1.8260—Hex Nuts 1st Gen Sight Glass
Except for Copper Tubes:
1.5431— 3/8”, Lower, 178 mm Long
1.5431—3/8”, Upper, 158 mm Long
1st Gen Sight Glass Configura on. Stainless Steel Parts are Not Available, must purchase 1.5890 Rebuild O‐Rings: 1.5280, 1 Per / 1.5290, 2 Per / 1.5300, 4 Per Sold Separately
25 Pump & Motors
1.5070 1.5093— Motor with Terminals, 1/3 HP, Configured to 220 Volts, 50/60 Hz * Can be configured for 100/120 Volts upon Request Stainless Steel Braided Hoses, 3/8” Compression 1.5060— 48” Long 1.5070— 84” Long 1.5060 Pump Configura ons
1.5690 1.4060 1.5510 1.5690—Fi ng 1.4060—Check Valve 3/8” 1.5115— Pump & Clamp, Lead Free, 60 Gallons per Hour 1.5112—Hydra Pump Assembly, without the Bypass System 1.5160 1.5170 1.5111—Single Pump Machine Assembly, Dual Hose 26 Pump & Motors
Hydra / Hybrid Models Only, Bypass Valve Assembly Shown with motor that is already included with Hydra / Hybrid Models 1.4290 1.5620 1.2441 2.5120 1.5730 1.5170 2.5100 1.5080 1.5740 1.5421 1.5115 1.2441 1.7654– Bypass Pump Assembly, (Does NOT include the Motor or By‐Pass Box) 1.2441— Water Control Valve 1.4290— Check Valve 1.5080—Brass Mix Valve Fi ng 1.5115—Pump 1.5421—Copper Tube, 160 mm Long 1.5170 ‐ Fi ng / 1.5620 ‐ Fi ng 1.5730 ‐ Fi ng / 1.5740 ‐ Fi ng 2.5100 ‐ Fi ng / 2.5120 ‐ Fi ngs 1.1832 2.3603 Parts of the By‐Pass Assembly
1.1832 ‐ Bypass Housing Base 1.2201 ‐ Terminal Strip, 3 Posi on 1.2320 ‐ Strain Reliefs, 3/8” Metal 2.3603 ‐ Bypass Solenoid Switch with Wires 1.2201 Bypass Assembly, Complete, shown without SS Hoses
1.1833 Bypass Housing Cover 27 Electronics: 2nd Genera on (Gen 2) (Circa: April 2011 to Sept 2015) Main Electronics Board for the 2nd Genera on Machines & MVP ‐ So ware is different 2.3800— Main Board for Gen 2 So ware 2.3801 ‐ Main Board for MVP So ware Solenoid Switches—Used on All Water Control and Brew Valves (Gen 2 & MVP Machines ONLY, Not Gen 1)
2.3602—Hot Water Valve 2.3603 Bypass 2.3601—Standard Configura on 1.1830—Mount Plate for Switch 28 Electronics: 2nd Genera on (Gen 2) (Circa: April 2011 to Sept 2015) Display Board Discon nued in
Sept 2015.
Use 2.3720
Discon nued
Sept 2015
2.3700—Display Board ‐Discon nued 2.3701—Display Screen Complete with Round Ribbon. Discon nued as of Sept 2015. Use 2.3729 (see page 13) 2.3720 ‐
Display Board
Digital Shot Timers Shot Timer Replacement Ribbon Cables:
2.3511—1 Group Machine 2.3512—2 Group Machine 2.3513—3 Group Machine Pin to choose Group 1, 2 or 3 2.3509—Digital Shot Timer Complete, (except for Ribbon Cable). Specify which po‐
si on you need. Group 1, 2 or 3—the config‐
ura on is different, but can be changed in the field by moving the Pin. 2.3506 ‐ Smoke Grey Acrylic Cover, Sold separetly 2.3501 ‐ Timer Replacement. No Housing or Cover Included 2.3500—Digital Shot Timer Board 29 Portafilters & Baskets
1.7030 1.7030 ‐ Portafilter Head, Black Handle & End Plug ‐ NO Spring, Basket or Spout is Included 1.7100 ‐ Bo omless (Naked) Portafilter Head, Black Handle & End Plug ‐ NO Spring, Basket or Spout is Included 1.7041 ‐ Double Spout 1.7032 ‐ Double Spouted Portafilter. NO Spring or Basket Included 1.7100 1.7050 ‐ Single Spout 1.7031 ‐ Single Spouted Portafilter. NO Spring or Basket (Not Pictured) Portafilter Springs, Stainless Steel 1.7080 ‐ Thinner, 1.1 mm, Ridged Baskets 1.7081 ‐ Thicker, 1.2 mm, Ridgeless Baskets Filter Baskets, 58 mm 30 Parts & Kits
1.3430 ‐ 9 mm Thick 1.3440 ‐ 8.4 mm Thick
Synesso Standard 1.3430 9 mm 1.3440 8.4 mm Portafilter Gaskets with Grooved Outside Edges for Easy Installa on & Ven ng of Trapped Water and Air 1.7020 ‐ Back Flush (Blind) Filter Basket NEW Stainless Steel, Steam Wand Tips Side View, 1.4170 Acorn 1.7064 ‐ NEW ‐ Stainless Steel, Custom Synesso Logo Tamper, 58.4 mm Base 1.4170 ‐ Chrome Plated Brass Steam Tip, Acorn Style, 4 Holes ‐ S ll Available 1.4171 ‐ 6 Hole 1.4172 ‐ 4 Hole NEW Stainless Steel, Steam Wand Tips Top View NEW Stainless Steel Steam Wand Tip Easier to clean (more sanitary), milk aera on is faster & easier, yielding a silky micro foam texture. Tighter fit and cleaner appearance on the steam wand. Available in 4 and 6 hole configura ons. 1.4171 ‐ 6 Hole 1.4172 ‐ 4 Hole 31 Parts & Kits
1.4505 1.7320
1.4200 1.7320—Steam Valve Rebuilt Kit
1.4505—Steam Valve Seal Holder, Brass 1.4200—Seal for Seat 1.4122—O‐Ring, Valve Body @ Hex Nut 1.4123—O‐Ring, Wand Nut *1.4310— O‐Ring, Stainless Spool *1.4321—O‐Ring, Wand Ball *1.4181—O‐Rings, Valve Stem *Use Food Grade Lubricant when Assembling, we recommend Super Lube, Part # 1.8600 1.4122 1.4123 1.4310 1.4321 1.4181 Descaling Powder, Primary ingredient is Citric Ac‐
id. It is Non‐Toxic, Biodegradable, Fast and Effec‐
ve. Always Use Proper Precau ons.
Food Grade Synthe c Grease Permanent Strength, Releases with Heat Always Use Proper
Precau ons. 1.7601 ‐ Dezcal, 7 oz., Ac vated Scale Remover, 1.8600 ‐ Super Lube, 3 oz. Tube 1.8630 ‐ 0.2 oz. Tube of Thread Sealant 32 Parts & Kits
1.3300 ‐ Diffuser Screw, Stainless Steel Exterior Panel Hardware 1.8300 ‐ Cap Nut 1.6010 ‐ O‐Ring 1.8440 ‐ Washer 1.3292 ‐ Diffuser Screen, Synesso Logo, Custom, Special Reinforced Screen Piezo Hot Water Switch 1.2316 ‐ Raised Rim, An ‐
Rota on Groove, with Terminals, (Replaces 1.2314 as of June 2015) 1.8882 ‐ Side Panel Knob Assembly (Thumb Screw) 1.4501 ‐ Steam Valve, Brass with Teflon Gasket. Pusher is Sold Separately Euro Cable Coding
Available upon Request 1.3870 ‐ Heat Shrink, 1/8” x 1.25” Long 1.4611 1.4612 Steam Valve Pushers: 1.4611 ‐ Original Style Stainless Steel Handles 1.4612 ‐ Black Cast and Current Stainless Handles Temperature Probe & Solenoid Wires 1.5020 ‐ Euro Hose and Fi ng Kit North American Hose is 3/8” Compression European is 3/8” BSP Parallel 1.5000 ‐ Euro Fi ng / 1.5010 ‐ Euro Hose 33 Parts & Kits
Hea ng Elements made from Incoloy 800® Tubing and Stainless Steel Bases & Hardware Incoloy is a Nickel‐Iron‐Chromiun Superalloy designed for excellent corrosion resistance and strength at high temperatures. All Elements are Annealed, to remove metal stress, and Electropolished. 1.2030 1.2040 1.2050 1.2060 Drain Manifold & Expansion Valve Hose (Black Hose) 1.3261 ‐ Bulk 1.3262 ‐ Copper Drain Manifold Connec on 1.3263 ‐ Manifold to Drain Box 1.3265 ‐ Expansion Valve 1.3268 ‐ End Cap Assembly, Includes Hose, Clamp & Copper Cap 1.3261 Black Hose, Sold by the Foot 1.3265 ‐ 4” 1.3268 Assembly 1.3262 ‐ 2” 1.3263 ‐ 7.5” REPLACE BLACK HOSE EVERY FEW YEARS TO PROTECT AGAINST LEAKS
34 Steam Elements, 220 Volts:
1.2030 ‐ 5000 Wa s, 3 Group 1.2040 ‐ 4000 Wa s, 2 Group 1.2050 ‐ 2000 Wa s, 1 Group Brew Elements, 220 Volts:
1.2060 ‐ 700 Wa s All Machines Special Applica on Elements 200 Volt: 1.3630 ‐ 5000 Wa s, 3 Group 1.3620 ‐ 4000 Wa s, 2 Group 1.3640 ‐ 700 Wa s, Brew *110 Volt: 1.2071 ‐ 700 Wa , Brew 1.2081 ‐ 1000 Wa , Steam *Synesso has Discon nued Pro‐
duc on of the 110 V, 1 Group 1.2010 ‐ Teflon Gasket for Hea ng Elements 1.3821 ‐ Heat Shrink, 1/2” Wide, 1.5” Long ‐ Used to Protect a Single Wire A ached to the Element Post 1.3861 ‐ Heat Shrink, 3/4” Wide, 1.5” Long ‐ Used when 2 Wires are A ached to an Element Post Electrical Box Parts & Kits
1.3740 ‐ Solid State Low Volt‐
1.3751 ‐ Solid State High Voltage age Relay, 40 amp. Used on Relay, 50 amps Electrical Box Lids to Switch the Brew and Steam Elements. 4.2780 ‐ Snub‐
ber Assembly. A ached to 1.2133 Deltrol Pump Relay in the electrical box to reduce electrical noise spikes. 1 Per Relay. 1.2133 ‐ Deltrol Pump Motor Relay, 208/240 Volts Shown: Electrical Box, 2 Group MVP Hydra, Nov 2015
Qty 4‐ 1.3740 Low Voltage Lid Relays Qty 2 ‐ 1.2133 Deltrol Pump Motor Relays with Snub‐
ber Assembly 4.2780 a ached Qty 1 ‐ 2.3801 Main Electronics Board (MVP So ware) (Gen 2 & Cyncra 2016 So ware, order 2.3800 Board) Qty 1 ‐ 1.2621 30 Amp Element Breaker (1.2631 ‐ 40A) Qty 1 ‐ 1.2420 On/Off Red Lighted Electronics Switch Qty 1 ‐ 1.2430 Safety Electronics Box Lid Switch Qty 1 ‐ 1.2580 Power Distribu on Block 1.2600 Strain Relief, 3/8” for Handheld Display & Wire Bundles. 1.2400 Nut for 1.2600 35 1.3121 1.2420 1.2631 1.2621 Electrical Box for 2 & 3 Group Machines 1.2420 ‐ On/Off Red Lighted Electronics Switch 1.2631 ‐ 40 amp Element Breaker, 3 Gp Machines 1.2621 ‐ 30 amp Element Breaker, 2 Gp Machines 1.3121 ‐ Heat Sink, Aluminum for Lid Relays Wood Packages ‐ Due to the Organic Nature of Wood, Color and Grain will Vary Bubinga Wood Maple Wood Black Walnut Zebra Wood Op onal Bubinga Wood Package shown on a 3 Group Cyncra. Portafilters can be configured as: Bo omless (Naked), Double or Single Spouted 36 Part #
Wood Packages and Parts
2.7121 Wood Package, Bubinga, 1 Group Machine ‐ 1 Steam Handle,1 Tamper, 1 Grp Top Handle & 2 Portafilters 2.7122 Wood Package, Bubinga, 2 Group Machine ‐ 2 Steam Handles,1 Tamper, 2 Grp Top Handles & 3 Portafilters 2.7123 Wood Package, Bubinga, 3 Group Machine ‐ 2 Steam Handles,1 Tamper, 3 Grp Top Handles & 4 Portafilters 2.7124 Wood, Bubinga, Group Top Handle 2.7125 Wood, Bubinga, Portafilter Handle Only, No Filter Head 2.7126 Wood, Bubinga, Steam Actuator Handle Only 2.7127 Wood, Bubinga, Tamper, 58.4 mm Stainless Steel Base, US Curve, Synesso Logo 2.7128 Wood, Bubinga, Portafilter Handle & PF Head (Spring, Spout & Basket Sold Separately) 2.7129 Wood, Bubinga, Steam Actuator Handle with Hanger Bolt 2.7131 Wood Package, Maple, 1 Group Machine ‐ 1 Steam Handle,1 Tamper, 1 Grp Top Handle & 2 Portafilters 2.7132 Wood Package, Maple, 2 Group Machine ‐ 2 Steam Handles,1 Tamper, 2 Grp Top Handles & 3 Portafilters 2.7133 Wood Package, Maple, 3 Group Machine ‐ 2 Steam Handles,1 Tamper, 3 Grp Top Handles & 4 Portafilters 2.7134 Wood, Maple, Group Top Handle 2.7135 Wood, Maple, Portafilter Handle Only, No Filter Head 2.7136 Wood, Maple, Steam Actuator Handle Only 2.7137 Wood, Maple, Tamper, 58.4 mm Stainless Steel Base, US Curve, Synesso Logo 2.7138 Wood, Maple, Portafilter Handle & PF Head (Spring, Spout & Basket Sold Separately) 2.7139 Wood, Maple, Steam Actuator Handle with Hanger Bolt 2.7141 Wood Package, Black Walnut, 1 Group Machine ‐ 1 Steam Handle,1 Tamper, 1 Grp Top Handle & 2 Portafilters 2.7142 Wood Package, Black Walnut, 2 Group Machine ‐ 2 Steam Handles,1 Tamper, 2 Grp Top Handles & 3 Portafilters 2.7143 Wood Package, Black Walnut, 3 Group Machine ‐ 2 Steam Handles,1 Tamper, 3 Grp Top Handles & 4 Portafilters 2.7144 Wood, Black Walnut, Group Top Handle 2.7145 Wood, Black Walnut, Portafilter Handle Only, No Filter Head 2.7146 Wood, Black Walnut, Steam Actuator Handle Only 2.7147 Wood, Black Walnut, Tamper, 58.4 mm Stainless Steel Base, US Curve, Synesso Logo 2.7148 Wood, Black Walnut, Portafilter Handle & PF Head (Spring, Spout & Basket Sold Separately) 2.7149 Wood, Black Walnut, Steam Actuator Handle with Hanger Bolt 2.7151 Wood Package, Zebra, 1 Group Machine ‐ 1 Steam Handle,1 Tamper, 1 Grp Top Handle & 2 Portafilters 2.7152 Wood Package, Zebra, 2 Group Machine‐ 2 Steam Handles,1 Tamper, 2 Grp Top Handles & 3 Portafilters 2.7153 Wood Package, Zebra, 3 Group Machine ‐ 2 Steam Handles,1 Tamper, 3 Grp Top Handles & 4 Portafilters 2.7154 Wood, Zebra, Group Top Handle 2.7155 Wood, Zebra, Portafilter Handle Only, No Filter Head 2.7156 Wood, Zebra, Steam Actuator Handle Only 2.7157 Wood, Zebra, Tamper, 58.4 mm Stainless Steel Base, US Curve, Synesso Logo 2.7158 Wood, Zebra, Portafilter Handle & PF Head (Spring, Spout & Basket Sold Separately) 2.7159 Wood, Zebra, Steam Actuator Handle with Hanger Bolt 37 Retrofit
Retrofit / Replace a Steam or Brew Tank for a Machine that has an Outdated Assembly
Which version of BREW TANK is being replaced? Which version of STEAM TANK is being replaced? 37° Welded Steel Flare and Steel Tubing Approx S/N range: 0001‐0344 For 1 group machine: Order kit # 2.4610 For 2 group machine: Order kit # 2.4620 For 3 group machine: Order kit # 2.4630 BOM ‐ Kit number 2.4610 1.5530 2.4533 1.5423
1.3222
1.2010
2.4523 1.5530
1
1.5130 1.3222 1.3212 1.2010 Replacement of BG3:
Order kit # 2.4631 BOM ‐ Kit number 2.4611 1
1
1.5851
1.3133
1.3268 1.3201 1.5443
Qty Tube, 1/4" Copper, Group 1 Inlet, 160 mm Long
Fi ng, Heat Exchange Outlet, 46x4 (formerly steam tank inlet)
Steam Tank, Universal 2 Gp, Retro Fit for CYNCRA, Sight Glass, Tubes & Fi ngs, Passivated
Tube, 1/4" Copper, Group 2 Inlet, 530 mm Long
Fi ng, Water Inlet, 90 Elbow, 1/8" Pipe by 1/4" Flare, 50x4
Adapter ‐ brew tank inlet ‐ 1 group
Replacement of BG2:
Order kit # 2.4621 1 1 Tube, 1/4" Copper, Group 1 Inlet, 160 mm Long
Fi ng, Heat Exchange Outlet, 46x4 (formally steam tank inlet)
Steam Tank, Universal 1 Gp, Retro Fit for CYNCRA, Sight Glass, Tubes & Fi ngs, Passivated
Adapter ‐ brew tank inlet ‐ 1 group
Gasket, Hea ng Elements ‐ Virgin Teflon
1 1
1
Fi ng, 54x6, 45 Deg Elbow, 3/8" OD, Male Pipe 1/4", Sight Glass
Brew Tank, Increased Welded Interior, SS, Passivated, No Fi ngs, 11‐2010
Drain Valve Fi ngs Assembly, Feb 2011
Black Hose Drain End Assembly
Tube, 3/8" Copper, 1st Grp Fill, Convert from Stainless Tube
Qty 1
1
BOM ‐ Kit number 2.4612 Qty 1.5700
Fi ng, Steam Tank Gauge, Brass, 48x4x4
Brew Tank, Increased Welded Interior, SS, Passivated, No Fi ngs, 11‐2010
Drain Valve Fi ngs Assembly, Feb 2011
1
1.3133 1.5443
1 1 1
1.3222 ‐ Brew Tank Inlet, 1st Tank Posi on 1.3133 1.5740
BOM ‐ Kit number 2.4621 1.5851
1.3133
1.3211 1.5443
Fi ng, 5x6, 45 Deg Elbow, 3/8" OD, Male Pipe 1/4", Sight Glass
Brew Tank, Increased Welded Interior, SS, Passivated, No Fi ngs, 11‐2010
Drain Valve Fi ngs Assembly, Feb 2014
Tube, 3/8" Copper, 2nd Grp Fill, Convert from Stainless Tube
1
1 1
BOM ‐ Kit number 2.4631 1.5851
1.3133
1.3221 1.5443
Fi ng, 54x6, 45 Deg Elbow, 3/8" OD, Male Pipe 1/4", Sight Glass
Brew Tank, Increased Welded Interior, SS, Passivated, No Fi ngs, 11‐2010
Drain Valve Fi ngs Assembly, Feb 2011
Tube, 3/8" Copper, 3rd Grp Fill, Convert from Stainless Tube
38 1.5443
Qty 1
Qty 1
1
BOM ‐ Kit number 2.4622 1
1 1 Adapter ‐ brew tank inlet ‐ 2 and 3 1 group Gasket, Hea ng Elements ‐ Virgin 2 Teflon BOM ‐ Kit number 2.4630 Qty Tube, 1/4" Copper, Group 1 Inlet, 1.5423 1 160 mm Long Fi ng, Heat Exchange Outlet, 46x4 1.5530 1 (formally steam tank inlet) Steam Tank, Universal 3 Gp, Retro 2.4513 1 Fit for CYNCRA, Sight Glass, Tubes & Fi ngs, Passivated Tube, 1/4" Copper, Group 2 Inlet, 1.5181 1 530 mm Long 1.3212 ‐ Brew Tank Inlet, 2nd & Fi
ng, Water Inlet, 90 Elbow, 1/8" 1.5130 2 Pipe by 1/4" Flare, 50x4 3rd Tank Posi ons Adapter ‐ brew tank inlet ‐ 1 group
1.3222 1 Adapter ‐ brew tank inlet ‐ 2 and 3 1.3212 2 group Tube, 1/4" Copper, Group 3 Inlet, 1.5471 1 755 mm Long Gasket, Hea ng Elements ‐ Virgin 1.2010 3 Teflon 1.5181
1/8” MPT Standard flare and Copper Tubing – OR – ¼” FPT Approx S/N range: 0345‐0890 Replacement of BG1:
Order kit # 2.4612 Replacement of BG2or BG3:
Order kit # 2.4622 Replacement of BG1:
Order kit # 2.4611 Qty BOM ‐ Kit number 2.4620 1.5423
Welded Steel Tubing Direct to Steam Tank Approx S/N range: 0001‐0344 1/8” MPT with Standard Fare and Copper Tubing Approx S/N range: 0345‐0890 For 1G machine:
Order steam tank # 2.4533 For 2G machine:
Order steam tank # 2.4523 For 3G machine:
Order steam tank # 2.4513 1 1
1 1
Qty 1 Fi ng, Hot Water Valve, 49x4x4 (no jet)
Brew Tank, Increased Welded Interior, SS, Passivated, No Fi ngs, 11‐2010
Drain Valve Fi ngs Assembly, Feb 2014
1
1
Retrofit, Brew Tanks
39 Retrofit, Brew Tanks
40 Retrofit
Retrofit Kits to replace the Skinner Water Controls on machines built from 2004 to October 2007 (Serial numbers 0001 to 0341) 1.2442 — Retro Fit Kit: Water Control Valve for Hot Water Tap 1.2443 — Retro Fit Kit: Water Control Valve for Steam Tank Fill 1.2444—Retro Fit Kit: Water Control Valve for Cold Water Buna Hose & Clamp comes with the 1.2443 to cover the Pressure Relief Valve and this protects the Wire Terminal Connec ons from any Moisture. *Full Instruc ons and parts breakdown are available for these Retrofit Kits. Email: parts@synesso.com / info@synesso.com 1.2310 ‐ Hot Water Switch, Maintained 1.2410 ‐ Man‐
ual Fill Switch, Momentary (They look the same) 41 Retrofit (Gen 1 )
Copper Drain Manifold 1.5830 1.5820 1.5810 1.5830 ‐ 3 Group Machines / 1.5820 ‐ 2 Group Machines / 1.5810 ‐ 1 Group Machines 1st Genera on Electronics—Power Boards
Power Boards—Uses Low Voltage Lid Mounted Solid State Relays for the Steam Elements 1.2162—Power Board, 2 Group Machines, Low Voltage Lid Mounted Relays for Steam Element 1.2163—Power Board, 3 Group Machines, Low Voltage Lid Mounted Relays for Steam Element 3 Gp Lid 1.2651— Power Board, 1 Group Machine, Low Voltage Lid Mounted Relay for Steam Element Example: 1st Gen Electronics shown with the Low Voltage Lid Mounted Relays for the Steam Element 42 Retrofit ‐ Gen 1
1st Genera on Electronics—Display Boards
Display Boards—100 Ohm and 2000 Ohm (2K). These are not interchangea‐
ble unless all the Temperature Probes are changed from 100 Ohm to 2K 1.2151— 5 Zone, 2K Ohm Display for 2 & 3 Group Machines 1.2150 — 5 Zone, 100 Ohm Display for 2 & 3 Group Machines Rev 2.20 Rev 3.15C 1.2660 — 2 Zone, 100 Ohm Display for 1 Group Machines 1.2661— 2 Zone, 2K Ohm Display for 1 Group Machines Rev 2.08 Rev 3.15C Temperature Probe, Brew & Steam Tanks
1.2390—2000 ohm (Current as of 3‐2007 1.2591—100 ohm (Original Machines) **These are NOT interchangeable 2000 ohm (2K) reads temp in .1 degrees F 100 ohm reads temp in .5 degrees F 43 Op ons & Accessories
Line Pressure Boost System for 2nd Genera on Machines with Wired Hand Controller
Synesso has developed a system that interfaces with the 2nd genera on control board to oper‐
ate an auxiliary pump and motor whenever line pressure is required. This allows the machine to be used in situa ons of very low line pressure, or where no line pressure is available. Ideally, the system will be installed when the machine is built, but it can be installed at a later me. NOTE: Due to the low pressure generated by this system, some brewing pressure drop can occur when water fills the steam tank, leaves the hot water tap, or is used by another group. The brew pressure can lose up to 20psi if mul ple ac ons occur simultaneously. Increase the boost pump pressure to 80psi and install a line pressure regulator to eliminate this pressure drop. Synesso recommends installing a pressure regulator when using this system in any industrial applica on. Synesso is now including the Pressure Regulator with the Line Pressure System. Controller Controller Unit Auxiliary Pump Control Box Line Pressure Boost System with Pressure Regulator 1.7875_1 ‐ Single Pump/Motor Machines 1.7875_2H ‐ 2 Group Hydra / Hybrid Machines 1.7875_3H ‐ 3 Group Hydra / Hybrid Machines 44 Pump & Motor for Line Boost System Op ons & Accessories
1.1555 ‐ Shot Mirror for Drip Tray, Polished Stainless Steel Front Facing View Side View 1.1550 ‐ Cup Riser, Stainless Steel Watch your Shot Develop & Pour with the Synesso Shot Mirror. Great Training Tool, Especially when used with a Bo omless Portafilter. Height 1.5” (38 mm) Works with Punch Slo ed Drip Trays, Secured in Place by Inser ng Tabs into Slots on Drip Tray Cup Riser & Shot Mirror Shown on 2 Group Hybrid with a Black Walnut Wood Package 45 Op ons & Accessories
Trim Kit for Synesso Espresso Machines 1.7582 ‐ Trim Kit Corners and Hardware, Stainless Steel Order Center Stainless Steel Piece Separately for Desired Machine 1.7583 ‐ 1 Group 1.7584 ‐ 2 Group 1.7585 ‐ 3 Group 1.7586 ‐ 4 Group (As Shown) Keep your machine from moving or sliding on the countertop 3.2011 Breaker Blocker Kit 3.2011 ‐ Breaker Blocker Kit for Electrical Box Easy to Install. Helps to Protect Against Inadvertently Switching the Element Breaker to the Off Posi on 1.1936 ‐ Foot / Leg Stabilizer Plate & Screws. Priced per Each. Fits Gen 1 & Gen 2 and Cyncra 2016 Machines 46 Op ons & Accessories
Synesso T‐Shirts
Available Colors:
Grey, Cranberry & Coffee Available Sizes: Unisex
Small, Medium, Large, X‐Large, XX‐Large Shirts are made from Ring Spun Co on. They are So er, Lighter Weight and More Durable than Regular Co on Shirts 1.7772 ‐ Synesso Shot Glass, Red Logo, 3 oz., Single Glass 1.7782 ‐ Synesso Shot Glass, Red Logo, 3 oz., 6 Pack of Glasses Marke ng Materials: ** Subject to Availability Cloth Patches ‐ “Synesso ‐
Made in the USA”, 3” Round, Adhesive Back Beverage Wrenches ‐ Red & Black, Metal Bu ons ‐ 1” Round, “S” Logo, Gauge or Machine Drawing, Various Colors 47 1.7075 ‐ Log Book, MVP Series This book has the Quick Start Guide, Reci‐
pe pages and pages for notes. 1 Book comes with each MVP Series ma‐
chines, but they are readily available to purchase as well. 48 
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising