Yealink SIP IP Phones Release Note of Version 71

Yealink SIP IP Phones Release Note of Version 71
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
Yealink SIP IP Phones Release Note of Version 71
1. Introduction
 Firmware Version:
T28:2.71.0.140 Upgrade to 2.71.0.165
T26:6.71.0.140 Upgrade to 6.71.0.165
T22:7.71.0.140 Upgrade to 7.71.0.165
T20:9.71.0.140 Upgrade to 9.71.0.165

Applicable Models:SIP- T28/T26/T22/T20

Release Date:November 24, 2013
2. New Features
There is no new Features added on the new commercial version.
3. Optimization
1. Optimized the feature of Broadworks XSI Password Authentication.
2. Optimized the feature of Prefix.
4. Bug Fixes
1. Fixed the issue that the user could hear two ring-back tones when the phone
received both SIP 180 and 183 message.
2. Fixed the probabilistic issue that the BLF List indicators didn’t flash when using
BLF List feature.
3. Fixed the issue that the configured timeout was invalid when the SIP phone
downloading the XML file.
4. Fixed the issue that the phone had no response when accessing the XML browser.
5. Fixed the issue that the phone status wasn’t displayed on the LCD screen when
pushing XML objects to the phone.
6. Fixed the issue that the syslog could also be exported to specified server when
configuring the Export Syslog mode as local.
Yealink SIP Phones’ Firmware Change Log
1/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
7. Fixed the issue that the Network Link speed was relegated to 10Mbps when
connecting the PC to the SIP Phone.
8. Fixed the issue that users couldn’t exit from the XSI web access password
interface when pressing the “X” key on the T22 SIP Phone.
5. Optimization description
1. The description about Broadworks XSI Password Authentication:
No matter how many XSI authentication messages need to be send, the phone
will send one authentication to the server at a time, and judges the authentication
result every time, if the authentication is successful, then it will continue the next
authentication, if the authentication is failed or the server do not return the result,
the phone will not send the next authentication message. When the authentication
is failed the phone will shut down the XSI authentication function immediately until
user change the XSI password and make a successful authentication.
Note: To shut down the XSI authentication means that the phone will no longer
send the authentication information or update the network any more. If the user
want to use XSI function it will popup up a window and ask the user to input a new
XSI password.
2. The description about the DSS Key type of prefix:
User can use this key feature to add a specified prefix number before the dialed
number.
Dependencies: Type (Key Event)
Key Type (Prefix)
Value (the prefix number)
Improvement: The Prefix DSS Key can now be used with other DSS Keys, for example,
a DSS Key is configured as "Prefix" which its value is "8600", and the other one is
configured as "Speed Dial" which its value is "158806", then if the user pressing the
Prefix DSS Key firstly and pressing the Speed Dial DSS Key as follow, the phone will
dial out the number as "8600158806".
Yealink SIP Phones’ Firmware Change Log
2/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
Yealink SIP IP Phones Release Note of Version 71
1. Introduction
 Firmware Version:
T28:2.71.0.130(Beta) Upgrade to 2.71.0.140(Business)
T26:6.71.0.130(Beta) Upgrade to 6.71.0.140(Business)
T22:7.71.0.130(Beta) Upgrade to 7.71.0.140(Business)
T20:9.71.0.130(Beta) Upgrade to 9.71.0.140(Business)

Applicable Models:SIP- T28/T26/T22/T20

Release Date:September 24, 2013
2. New Features
There is no new Feature added on the new commercial version.
3. Optimization
1. Optimized the feature of SRTP.
4. Bug Fixes
1. Fixed the issue that the web interface and LCD screen are failed to change the
display name of “Anonymous Call” to “Send Anonymous”.
2. Fixed the issue that the LED lamp display abnormal when user setting the
Dsskeys as BLF while connecting two EXP.
3. Fixed the issue that the IP Phone Automatic restarted probably when user
setting the Dsskeys as BLF while connecting two EXP.
4. Fixed the issue that the T2X series didn't receive the CFG files during RPS Auto
provision.
5. Fixed the issue that the IP Phone didn’t make a call to the Voice mail when user
pressing the message key.
6. Fixed the issue that T26 was always ringing warning tone with "beep".
7. Fixed the issue that T20 didn’t update the text logo during auto provisioning.
8. Transfer the Pace feature to the page of settings on the web interface.
Yealink SIP Phones’ Firmware Change Log
3/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
9. Fixed the issue that the main speaker didn't synchronize the Call information on
the LCD screen during Transfer among the T2X series.
10. Fixed the issue that some of the T2X series SIP phones filed to Auto Provision on
the version of V71.
11. Fixed the issue that the V71-AES KEY was enable by default.
12. Added the configuration of Key Tone on the LCD.
13. Fixed AES function that Common and MAC-oriented CFG files need different
decrypt files, and only when they are encrypted, they download decrypt files.
14. Fixed the issue that the length of the user’s password has been changed to 100
characters during configuring the auto provision file.
15. Fixed the issue that the IP Phone usually rebooted when LLDP was enable.
Yealink SIP Phones’ Firmware Change Log
4/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
Yealink SIP IP Phones Release Note of Version 71
1. Introduction
 Firmware Version:
T28: 2.71.0.125(Beta) Upgrade to 2.71.0.130(Beta)
T26: 6.71.0.125(Beta) Upgrade to 6.71.0.130(Beta)
T22: 7.71.0.125(Beta) Upgrade to 7.71.0.130(Beta)
T20: 9.71.0.125(Beta) Upgrade to 9.71.0.130(Beta)
 Product Name:SIP-T28/T26/T22/T20
 Release Date:August 2th , 2013
2. BUG Fixed
1. Fixed the bug of user agent.
2. Fixed the inconsistent sequence of Codec between T22 and T20/T26/T28.
3. Fixed the issue that phone will get stuck if the translation of Line attribute is too
long.
Yealink SIP Phones’ Firmware Change Log
5/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
Yealink SIP IP Phones Release Note of Version 71
1. Introduction
 Firmware Version:
T28: 2.71.0.120(Beta) Upgrade to 2.71.0.125(Beta)
T26: 6.71.0.120(Beta) Upgrade to 6.71.0.125(Beta)
T22: 7.71.0.120(Beta) Upgrade to 7.71.0.125(Beta)
T20: 9.71.0.120(Beta) Upgrade to 9.71.0.125(Beta)
 Product Name:SIP-T28/T26/T22/T20
 Release Date:July 23th , 2013
2. BUG Fixed
1. Fixed the display issue of user agent on T26/T22/T20.
2. Fixed the issue that Auto Answer Delay configuration can’t be changed via Auto
provisioning.
3. Fixed the silence issue when hold and then resume the call during Transfer.
4. Fixed the issue that contacts can’t be added when the translation of Line is too
long.
5. Fixed the issue that Logo in Web UI doesn’t have hyperlink.
Yealink SIP Phones’ Firmware Change Log
6/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
Yealink SIP IP Phones Release Note of Version 71
1. Introduction
 Firmware Version:
T28: 2.71.0.110(Beta) Upgrade to 2.71.0.120(Beta)
T26: 6.71.0.110(Beta) Upgrade to 6.71.0.120(Beta)
T22: 7.71.0.110(Beta) Upgrade to 7.71.0.120(Beta)
T20: 9.71.0.110(Beta) Upgrade to 9.71.0.120(Beta)
 Product Name:SIP-T28/T26/T22/T20
 Release Date:July 12th , 2013
2. Optimization
1. Optimized maximum of Local Phonebook entries from 300 to 1000.
2. Optimized rule for the Line ID while Auto Provisioning.
3. Optimization description
1. Optimized maximum of Local Phonebook entries from 300 to 1000.
Description: Optimized maximum of Local Phonebook entries from 300 to 1000.
2. Optimized rule for the Line ID while Auto Provisioning.
Description: On V71 early version(before x.71.0.120), 0 means the first line, 1
means the second line, 2 means the third line, etc.
On x.71.0.120, 0/1 means the first line, 2 means second line, 3 means the third
line, etc.
After change, the syntax of version x.71.xx.xx is the same as old version
(x.70.xx.xx or x.6X.xx.xx). Below is the value of Line ID on different versions.
Model
Line
Value on V6X and V70
Value on V71 early version
Value on x.71.0.120
Yealink SIP Phones’ Firmware Change Log
Line 1
1
0
0/1
Line 2
2
1
2
Line 3
3
2
3
Line 4
4
3
4
Line 5
5
4
5
Line x
x
x
x
7/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
Yealink SIP IP Phones Release Note of Version 71
1. Introduction
 Firmware Version:
T28: 2.70.0.120 Upgrade to 2.71.0.110(Beta)
T26: 6.70.0.120 Upgrade to 6.71.0.110(Beta)
T22: 7.70.0.120 Upgrade to 7.71.0.110(Beta)
T20: 9.70.0.120 Upgrade to 9.71.0.110(Beta)
 Product Name:SIP-T28/T26/T22/T20
 Release Date:June 15th , 2013
2. New Features
1. Added Auto Provision configuration to enable/disable Group Listening feature.
2. Added functional verification for Reset to Factory feature.
3. Added Reboot in talking configuration in Web UI.
4. Added DHCP Hostname configuration in Web UI.
5. Added Auto Provision configuration to enable/disable automatic configuration
of BLF List.
6. Added the feature that the phone identifies Alert-Info header field for
BroadWorks platform.
7. Added the Anywhere feature for BroadWorks platform.
8. Added the Caller ID feature for BroadWorks platform.
9. Added the Meet-me conference feature for BroadWorks platform.
10. Added the Remote Office feature for BroadWorks platform.
11. Added the Simultaneous Ring Personal feature for BroadWorks platform.
12. Added dynamic getting Ipv6 feature.
13. Added dynamic getting VLAN feature.
14. Added Backup SIP server feature.
15. Added DNS Cache feature.
16. Added Tr069 feature.
17. Added intelligent search in directory list (Directory Interface/Dialing
Yealink SIP Phones’ Firmware Change Log
8/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
interface/Pre-Dial Interface).
18. Added the “Abc” IME when searching directory, “Abc” IME mean first letter
automatic Capitalization.
3. Optimization
1. Optimized the type of Line in Dsskey: Deleted the Auto type and set Line 1 as
default.
2. Optimized Network Directory interface: Optimized user experience in Web UI.
3. Optimized the display of Network Directories on the LCD screen: Moved the
Department to Detail option.
4. Optimized Network Directory: Added Auto Provision configuration to configure
the display name of Group Common and Enterprise Common.
5. Optimized the translation of Directory: Changed Favorite into Directory.
6. Optimized Reset to Factory feature: Added Auto Provision configuration whether
Reset to Factory interface can be accessed into by long pressing OK button.
7. Optimized port: Added PC Port Active configuration in Web UI.
8. Optimized Interval (Minutes) configuration: Changed 60 into 1400 as default.
9. Optimized certificate feature: Added 30 CA certificates and one Device certificate
in factory settings.
10. Optimized login interface in Web UI: Added the model information of phone.
11. Optimized logo in Web UI: Added model information of phone behind the LOGO.
12. Optimized keypad lock: Deleted the type of Lock& Auto Answer.
13. Optimized Voice Mail: Moved Voice Mail configuration from Basic to Advanced
interface of Account.
14. Optimized Web Server Type: Optimized HTTP & HTTPS configuration.
15. Optimized Block XML In Calling option: Optimized user experience in Web UI.
16. Optimized Tones: Deleted Record tone configuration in Web UI.
17. Optimized Server Certificate: Added the display of Device Cert status on LCD.
18. Optimized the BLF List feature of BroadWorks.
19. Optimized BLF: Deleted BLF Notify Type.
20. Optimized the Call Center feature for BroadWorks.
21. Optimized the directory feature of BroadWorks.
22. Optimized the Forward Diversion feature of BroadWorks.
23. Optimized the Call Park feature of BroadWorks.
Yealink SIP Phones’ Firmware Change Log
9/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
24. Optimized the search feature of directory list searching.
25. Optimized the favorite setting of contacts.
26. Optimized the option of custom searching source.
27. Optimized the setting of Dsskey.
28. Optimized Dsskey feature: Added the support of LDAP and network call log in
Programmable Key.
29. Optimized the WEB UI: The WEB UI is adjusted to unify the WEB interface with
the T3x phones. Important change: The primary Phone page is replaced by the
Features Page and the Upgrade page is replaced by Setting page.
4. BUG Fixed
1. Fixed the issue that special character (”!”) isn’t supported in SIP password.
2. Fixed the issue that DHCP Option 66 doesn’t work.
3. Fixed the issue that Hold can’t be recovered when using DNS-SRV redundancy
server.
4. Fixed no voice issue after Call Pickup.
5. Fixed the issue that message1 can’t be exported when exporting syslog.
6. Fixed the 802.1x authentication issue when VLAN is enabled.
7. Fixed the secondary encryption issue when reset to factory.
8. Fixed the no voice issue when the second incoming call comes (Using Ring Group
feature on Asterisk).
9. Fixed the issue that doesn’t response to the option massage from Asterisk server.
10. Fixed the issue that DNS-SRV Registration Failover can’t be switched by
Weight/Priority.
11. Fixed the issue that phone doesn’t send Un-Register massage to server to log off
when reset to factory.
12. Fixed the issue that transfer failed message will not be displayed when parking
call into the same SP0.
13. Fixed the issue that Session Timer can’t be filled with four figures.
14. Fixed the issue that two calls end when DUT press Call Park Retrieve button.
15. Fixed the authentication invalided issue when redirecting to the URL with
authentication.
16. Fixed the spelling mistakes of Note on Web UIUpgradeAdvanced.
Yealink SIP Phones’ Firmware Change Log
10/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
17. Fixed upgrade failed issue when using HTTP Auto Provision and the leak issue of
HTTPS authentication.
18. Fixed the issue that first digit can’t be distinguished in a call when entering
password quickly.
19. Fixed the issue that call can’t be picked up at once by using handset.
20. Fixed the issue that auto provision fails by using URL got by DHCP option43.
21. Fixed the 200 OK massages issue with two Contact header fields when
registering the account.
22. Fixed the issue that wireless headset can’t be synchronized to ring when call is
initialized by HTTP instruction.
23. Fixed the non-unified HTTP format of Action URI.
24. Fixed the issue that BLF List packets can’t be received when monitoring multiple
accounts.
25. Fixed the one-way voice issue when using SRTP/TLS.
26. Fixed the issue that TLS coming call can’t be picked up.
27. Fixed reboot issue when entering some digits and then pressing Cancel button.
28. Fixed the issue that multiple ringtone can’t be uploaded once by auto
provisioning.
29. Fixed the issue that the name of calling party can’t be got and then refresh the
interface.
30. Fixed the issue that configuration in the mac.cfg can’t be updated after upgrade.
31. Fixed the security issue that Username/Password can be seen in syslog.
32. Fixed the issue that Tones feature can’t work well.
33. Fixed the no voice issue in handset of T20.
34. Fixed the issue that call can’t be held by the softphone.
35. Fixed the issue of BLF List indicator light.
36. Fixed the reboot issue when the phone receives the NOTIFY with check-sync and
reboot=true.
37. Fixed the registration issue when re-obtaining IP address.
38. Fixed the issue that number can’t be dialed via using Send button in LDAP
interface.
39. Fixed the issue that call can’t be made in LDAP interface.
40. Fixed the issue that number can’t be dialed via using #/OK button in LDAP
interface.
41. Fixed the incompatible issue with the type of Avaya-cm-alert-type.
Yealink SIP Phones’ Firmware Change Log
11/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
42. Fixed the issue that contact information in Local Phone Book disappears after
turning off the power.
43. Fixed three-way conference failed issue on Nordata MCM.
44. Fixed the issue that sound of the first call will be louder when receiving another
incoming call.
45. Fixed transfer failed issue in Zultys.
46. Fixed the issue that the format of date can’t be changed.
47. Fixed the wrong label display issue when picking up the handset.
5. Description to the new added features
1. Added Auto Provision configuration to enable/disable Group Listening feature.
Instruction: If “Group Listening feature” is enabled, when you are listening by
handset or microphone during a call, you can press handsfree to listen both on
handset (or microphone) and handsfree.
 The configuration of Auto Provision: features.group_listen_in_talking_enable =
 1- Enable (default), 0- Disable.
2. Added functional verification for Reset to Factory feature.
Instruction: Long press OK button to access Reset to Factory interface, press OK.
If you enable this feature, you will access into the interface like below. You need to
enter the correctly password to complete this action. If you disable this feature,
phone will reset to factory immediately.
 The configuration of Auto Provision: features.factory_pwd_enable =
 0- Disable (default), 1- Enable.
3. Added Reboot in Talking configuration in Web UI.
Instruction: Allow to forcibly reboot the phone during a call when the phone
received a reboot massage by Action URI if this configuration is enabled.
Yealink SIP Phones’ Firmware Change Log
12/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
Path: Web UIFeaturesGeneral InformationReboot in Talking.
 0- Disable (default), 1- Enable.
4. Added DHCP Hostname configuration in Web UI.
Instruction: Phone updates the Hostname to DHCP server via DHCP Option 12.
Path: Web UI FeaturesGeneral InformationDHCP Hostname.
 The default hostname of T20/T22/T26/T28:
T20 hostname: SIP-T20P, T22 hostname: SIP-T22P,
T26 hostname: SIP-T26P, T28 hostname: SIP-T28P.
Yealink SIP Phones’ Firmware Change Log
13/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
5. Added Auto Provision configuration to enable/disable automatic configuration
of BLF List.
Instruction: After the phone configures with BLF List URI, Dsskey in idle will be
filled with BLF list automatically and continuously when this feature is enabled.
 The configuration of Auto Provision: phone_setting.auto_blf_list_enable =
 1- Enable (default), 0- Disable.
 To configure the priority of Dsskey when it is filled with BLF List:
phone_setting.blf_list_sequence_type =
0-The priority order is Linekey, Memory and EXP (default).
1-The priority order is EXP, Memory and Linekey.
6. Added the phone identify Alert-Info header field for BroadWorks platform
Instruction: The header Alert-Info is used for realizing the priority-ring feature in
BroadWorks platform, according the Preconfigured rules, the server will send the
invite message which contains alert-info header to callee. In V71, the Yealink phones
will identify alert-info header and play custom ringtone according the value of
alert-info.
7. Added the Anywhere feature for BroadWorks platform.
Yealink SIP Phones’ Firmware Change Log
14/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
Instruction: BroadWorks Anywhere feature makes users able to do the following
in any place:
 Calling extension from Mobile phones.
 Switching the call from Mobile phone to Desktop phone.
 Switching the call from Desktop phone to Mobile phone.
 Enabling/Disabling the simultaneous ringing feature.
Path:MenuCall ControlAnywhere.
8. Added the Caller ID feature for BroadWorks platform.
Instruction: The anonymous call feature can be realized by synchronizing the
configuration between the phone and the server.
1. Users can have flexible and fast control of whether to hide their CIDs(Caller ID),
whether to see the incoming caller ID.
2. The user B shows “anonymous” when caller A hides his CID. (The translation of
“anonymous” may not be localized, please contact Yealink support if necessary.)
9. Added the Meet-me conference feature for BroadWorks platform.
Instruction: One key login Meet-me conference feature make users Login in a
conference fast and easy. There is no waiting for the DTMF time. To use this feature,
you can set the DSS Key to Conference ID and enter the PIN.
Path: MenuFeaturesDSS KeysMemory Keys or Line Keys.
Yealink SIP Phones’ Firmware Change Log
15/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
10. Added the Remote Office feature for BroadWorks platform.
Instruction: Yealink have developed the Remote office feature for the BroadSoft
Platform. It makes users able to realize remote office working. After setting the
private phones (for example, mobile phone, home telephone or hotel telephone) to
remote phone number, you can remotely use office phone number to dial and
answer the call via private phones.
Path: MenuCall ControlRemote Office.
11. Added the Simultaneous Ring Personal feature for BroadWorks platform.
Instruction: Simultaneous Ring Personal feature realizes simultaneous ring
between the remote phone and office phone when there is an incoming call.
Path: MenuCall ControlSimultaneous Ring Personal.
12. Added dynamic getting Ipv6 feature.
Instruction: Added dynamic getting Ipv6 feature, it automatically configures
ICMPv6 if no status .
Path: Web UINetworkBasic.
New options: Mode(IPv4/IPv6): IPv4,IPV6,IPv4&IPV6 (default setting is
IPv4&IPV6)
Yealink SIP Phones’ Firmware Change Log
16/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
13. Added dynamic getting VLAN feature.
Instruction: In V70, the phone only support gets VLAN by LLDP and put the value
of VID and Priority into VLAN parameters which were manually configurated. We
added DHCP option to get VLAN in new version 71, and separate the LLDP and
manually setting VLAN methords.
Path: Web UINetworkAdvanced.
New options:DHCP VLAN Active (default enabled), Option (default 132).
14. Added SIP server backup feature.
Yealink SIP Phones’ Firmware Change Log
17/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
Instruction: Backup SIP server is actually a disaster recovery backup system,
users can register two sip servers at the same time, phone use the primary sip server
by default, and it will change to the second sip server if the primary sip server is
down and stop working.
Path: Web UIAccountRegister.
15. Added DNS Cache feature.
Instruction: DNS Cache feature is a solution for the phones which there is not
DNS server configured or when the DNS queries can’t get any reply. When the phone
can’t get a result from DNS server, users can set a value in DNS Cache themselves.
16. Added Tr069 feature.
Instruction: Added the TR069 feature in V71.
Path: Web UISettingsTR069.
Yealink SIP Phones’ Firmware Change Log
18/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
17. Added intelligent search in directory list (Directory Interface/Dialing
interface/Pre-Dial Interface).
Instruction: Added the intelligent searching for directory in firmware V71.
18. Added the “Abc” IME when searching directory, “Abc” IME mean first letter
automatic Capitalization.
6. Optimization description
1. Optimized the type of Line in Dsskey: Deleted the Auto type and set Line 1 as
default.
Description: Deleted the Auto type and set Line 1 as default on Web UI and LCD.
Yealink SIP Phones’ Firmware Change Log
19/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
2. Optimized Network Directory interface: Optimized user experience in Web UI.
Description: Changed display name from Broadsoft Phone Book into Network
Directly. Added more options into Network Directly interface to optimize user
experience.
BroadSoft Phone Book interface in FW2.71.0.10
Yealink SIP Phones’ Firmware Change Log
20/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
Network Directory interface in FW2.71.0.110
3. Optimized the display of Network Directories on the LCD screen: Moved the
Department to Detail option.
Description: Moved the Department to Detail option in Network Directories on
the LCD screen.
4. Optimized Network Directory: Added Auto Provision configuration to configure
the display name of Group Common and Enterprise Common.
Description: Added Auto Provision configuration to configure the display name
of Group Common and Enterprise Common.
Path: Web UIDirectoryNetwork DirectoryGroup Common / Enterprise
Common.

The configuration of Auto Provision:
bw_phonebook.group_common_displayname =
bw_phonebook.enterprise_common_displayname =

Delete the old configuration of Auto Provision:
bw_phonebook.common_displayname=
.
5. Optimized the translation of Directory: Changed Favorite into Directory.
Yealink SIP Phones’ Firmware Change Log
21/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
Description: As the old translation “Favorite” is difficult to understand, so
changing “Favorite” to “Directory”.
6. Optimized Reset to Factory feature: Added Auto Provision configuration
whether Reset to Factory interface can be accessed into by long pressing OK
button.
Description: Added Auto Provision configuration whether Reset to Factory
interface can be accessed into by long pressing OK button. Phone will reboot
automatically when configuration is changed.

The configuration of Auto Provision: features.reset_by_long_press_enable =

1- Enable (default), 0- Disable.
7. Optimized port: Added PC Port Active configuration in Web UI.
Description: To configure the PC Port to Auto-Negotiation or not.
Path: Web UI NetworkPC PortPC Port ActivePC Port Active.

The Auto Provision configuration: network.pc_port.enable =

1- Auto-Negotiation (default), 0- Disable.
Yealink SIP Phones’ Firmware Change Log
22/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
8. Optimized Interval (Minutes) configuration: Changed 60 into 1400 as default.
Description: Change the Interval time from 60 into 1400 as default.
Path: Web UISettingsAuto-ProvisionInterval (Minutes).
9. Optimized certificate feature: Added 30 CA certificates and one Device
certificate in factory settings.
Description: Added 30 CA certificates and one Device certificate in factory
settings. You can only see the certificates user uploads normally in this interface.
Yealink SIP Phones’ Firmware Change Log
23/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
10. Optimized login interface in Web UI: Added the model information of phone.
Description: Added the model information of phone in the Login interface like
“Enterprise IP phone SIP-T28P”.
Login interface of FW 2.71.0.10
Login interface of FW 2.71.0.110
11. Optimized logo in Web UI: Added model information of phone behind the
LOGO.
Description: Added model information of phone behind the LOGO like below.
Yealink SIP Phones’ Firmware Change Log
24/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
Logo of FW 2.71.0.10
Logo of FW 2.71.0.110
12. Optimized keypad lock: Deleted the type of Lock& Auto Answer.
Description: Delete the type of Lock& Auto Answer in Web UI / LCD.
Path: Web UIFeaturesPhone LockKeyboard Lock Type.
13. Optimized Voice Mail: Moved Voice Mail configuration from Basic to Advanced
interface of Account.
Description: Move Voice Mail configuration from Basic to Advanced interface of
Account.
14. Optimized Web Server Type: Optimized HTTP & HTTPS configuration.
Description: Web Server Type configuration is replaced by Web Server HTTP
configuration and Web Server HTTPS configuration separately in Web UI / LCD.
Yealink SIP Phones’ Firmware Change Log
25/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
Path: Web UINetworkAdvancedWeb Server.
Web Server of FW 2.71.0.10
Web Server of FW 2.71.0.110
15. Optimized Block XML In Calling option: Optimized user experience in Web UI.
Description: Optimized user experience in Web UI.
 Move from: Web UIGeneral InformationBlock XML In Calling.
 Move to: Web UIFeaturesRemote ControlBlock XML In Calling.
16. Optimized Tones: Deleted Record tone configuration in Web UI.
Description: Deleted Record tone configuration in Web UI.
Path: Web UISettingtones.
Yealink SIP Phones’ Firmware Change Log
26/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
Tones of FW 2.71.0.10
Tones of FW 2.71.0.110
17. Optimized Server Certificate: Added the display of Device Cert status on LCD.
Description: Added the display of Device Cert status on LCD. The values of
Device Cert are Factory Installed/Not Installed.
Path: StatusMorePhone6.Device Certificate.
Yealink SIP Phones’ Firmware Change Log
27/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
18. Optimized the BLF List feature of BroadWorks.
Description: Added the configuration of “LED off in idle” to switch off the LED
when the monitored account is in idle status.
Path: Web UIFeaturesGeneral InformationLED Off in Idle.
19. Optimized BLF: Deleted BLF Notify Type.
Description: Delete BLF Notify Type in General Information.
Old Path: Web UIPhoneFeaturesGeneral Information.
BLF Notify Type of FW 2.70.0.120
Yealink SIP Phones’ Firmware Change Log
28/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
20. Optimized the Call Center feature for BroadWorks.
Detail:For more details please refer to the ACD feature in Yealink IP Phone
Features Integrated with BroadWorks User Guide.pdf
21. Optimized the directory feature of BroadWorks.
Description: Provide Search Softkey in contacts list page, users can use it to do
accurate searching.
22. Optimized the Forward Diversion feature of BroadWorks.
Description: According to the header of Diversion and History-info, show the
value in the GUI when incoming forward call.
23. Optimized the Call Park feature of BroadWorks.
Description: Added the Park and Group Park and Retrieve operation via
configuration of XSI.
24. Optimized the search feature of directory list searching.
Description: Optimized the search feature of directory list searching in V71, it
supports searching local phonebook, remote phonebook, LDAP, blacklist, and
BroadSoft directory. The third softkey is configured as “SEARCH” by default. The
searching source can be selected before searching. For example, if “XML remote
phonebook” is selected as searching source, then it only searches from the “XML
remote phonebook”.
25. Optimized the favorite setting of contacts.
Description: Users can customize the items of the Favorite list.
Path:Web UIContactssetting.
Yealink SIP Phones’ Firmware Change Log
29/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
LCD result:
26. Optimized the option of custom searching source.
Description: Users can customize the items of the searching source list. the
source contain Local Contacts, History, Remote Phonebook, LDAP and Network
Directories.
Path:Web UIContactssetting.
Yealink SIP Phones’ Firmware Change Log
30/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
27. Optimized the setting of Dsskey.
Description: User can long press the Memory Key or Line Key for more than 3
seconds, and it will go into setting Dsskey interface directly.
28. Optimized Dsskey feature: Added the support of LDAP and network call log in
Programmable Key.
Description: It supports setting the LDAP feature in Programmable Key.
Path: Web UIDsskeyProgrammable Key.
Yealink SIP Phones’ Firmware Change Log
31/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
29. Optimized the web UI: The WEB UI is adjusted to unify the WEB interface with
the T3x phones. Important change: The primary Phone page is replaced by the
Features Page and the Upgrade page is replaced by Setting page.
Description: In the Account page, divided it into two parts by Register page and
Basic page:
Phone page is replaced by Features page and Settings page:
Yealink SIP Phones’ Firmware Change Log
32/33
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
Yealink SIP Phones’ Firmware Change Log
33/33
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising