M980 981 Dealer 01.06 - United Radio Service

M980 981 Dealer 01.06 - United Radio Service
Jan-06
Last Revised: 01/06/06
Land-Mobile Price List
TK-980/981
800 / 900 MHz Trunked Mobile Radios
Model
Description
List
%start models
800 MHz
TK-980
L-889
KMC-27B mic., DC Cable, & Mounting Bracket incl.
800 MHz, 15W LTR-32 Systems, CONV-250 CH.
Install firmware & enable NPSPAC operation in TK-980
$525.00
84.00
Other required items: KPG-49D (V2.00 or higher) higher permits "per channel" programming of NPSPAC
capability.
Note: NPSPAC and PassPort® capabilty are not available in the same firmware option.
900 MHz
TK-981
%end models
KMC-27B mic., DC Cable, & Mounting Bracket incl.
900 MHz, 15W LTR-32 Systems, CONV-250 CH.
GENERAL FEATURES:
- 15W 800 & 900 MHz Models
- NPSPAC firmware option
- Programmable Power Per Channel
- Companded Audio Per Channel
(wide & narrow*)
- 4 W Speaker Audio Power
- Inverting Front Panel (speaker position)
- 10 Character Alphanumeric Display
- 3 Numeric Character Sub-Display
- Dot Matrix Backlit LCD
- LCD Operational Icons
- Two Color Tri-State LED Indicator
- 4 PF Keys (lighted)
- Shift Key Function (req. DTMF mic)
- FleetSync®
- Encryption/Scrambler Board Support
- ANI Board Support
- Emergency Type (FS, DTMF, ANI Brd.)*
- Emergency Calling Feature
- DTMF Decode Selective Call
- DTMF Deadbeat Disable
- DTMF PTT ID & DTMF Emergency ID*
- Alert with Transpond (DTMF)*
- PTT ID Side-Tone (ANI Boards)*
- PTT ID TA Inhibit*
- Call Alert Tone: Mom or Continuous
(DTMF & FleetSync®)*
- Auto-Dial Memory (32 numbers)
- Horn Alert (req. KCT-19 & KAP-1)
- Public Address
- Single COM Port: FS & GPS serial data*
541.00
TK-980/981 FEATURES:
- Programmable Function DTMF Mics
- Data Port I/O’s (KCT-19)
- FleetSync® COM 1 & 2 (KCT-31)
- Accessory Connector Option (KCT-19)
- Ignition Sense On/Off
- Timed Power Off (8 hr.)
- Inhibit PTT ID in TA
- PTT Release Tone
- Minimum Volume
- Control Tones On/Off
- Power On Text
- Embedded Message (64 Char.)
- Data Password (“Anti-piracy”)
- Radio Password (Radio Lock)
- Clone Capability (enable/disable)
- Front Panel Field Programming & Tuning
- Windows® Programming & Tuning
- Flash ROM Firmware
- KES-3 External Speaker (compact)
- KES-5 External Speaker (req. KCT-19)
- MIL-Spec/Noise-Cancel Mic Options
- KDS-100 Compatible (req. KCT-34/36)
- KGP-2A/2B Compatible (req. KCT-34/36)
- MIL810 C, D & E (9 categories)
TRUNKED FORMAT
- 32 Systems (max.)
- Trunked LTR & Conventional Systems
- 250 Group IDs (aggregate max.)
- Single Priority Scan (within any Conv. System only)
- Scan Delete/Add
- QT/DQT Encode & Decode, BCL, TOT & TA (Conv.)
- LTR Talk Around / Scan Revert Group Display
- System Scan & Group Scan / Auto System Search
FLEETSYNC®
- PTT ID (Digital ANI; 100 ID List capacity*)
- Caller ID Display (per CH; BOT only)*
- Caller ID Stack (last 3 calls)*
- Status Messaging (50 Msg. List capacity*)
- 70 Custom Dispatch Messages
- 9 Reserved Special Use Messages
ST# 98 - Man Down Emergergency (portables)*
ST# 99- Emergency Status
ST# 88- Emergency Mode Off*
ST# 89- Horn Alert Request* (mobiles)
ST# 90- Stun radio (No TX)
ST# 91- Stun radio (No TX / No RX audio)
ST# 92- Turn off Stun
ST# 93- ACK stun is ON
ST# 94- ACK stun is OFF
ST# 80-87, 95-97 (Reserved for future use)
- Selective Call
Short Text Messages** (stored/display)
Long Text Message** (req. KDS-100, KCT-34/36)
PC Serial Control Interface** (req. KCT-31)
FS GPS Data** (req. aftermarket GPS/modification)
PC Serial Interface**
* Features added in Ver. 2 radios
** Fleetsync® Enhanced Option required - NOT factory installed
on these models; please purchase seperately.
--------------------------------------------------INCLUDED ITEMS
- KMC-27B Standard Microphone
- DC Cable - Mounting Bracket
- Instruction Manual
Important Note:
The TK-480/481/980/981 only operate in "Trunked Format" (LTR & Conventional systems). These are not "Dual Format" radios like the TK-280/380/780/880
mobiles which operate in either Trunked Format (LTR & Conventional systems) or Conventional Format (traditional conventional channel organization with
priority scan).
Page 1 of 8
TK-980_981
Jan-06
Last Revised: 01/06/06
Accessories for the TK-980/981 Series Radios
Model
Description
List
ACCESSORY COMPATIBILITY FOR THE 80-SERIES MOBILES
KCT-18
KCT-19
KAP-1
KCT-31
KCT-34
KCT-35
KCT-36
KDS-100
KGP-2A/2B
KCT-18 KCT-19
X
X
X (a) X (a)
X (b) X (c )
X (b)
:
X (b)
:
X (b)
X (b)
:
:
KAP-1 KCT-31KCT-34KCT-35KCT-36 KDS-100 KGP-2A/2B
X (a)
X (b) X (b) X (b)
X (b)
X (b)
:
X (a) X (c )
:
:
:
:
:
X (d )
:
:
:
:
:
X (c )
:
:
:
:
:
X
:
X
X
:
:
X
X
X
:
:
:
X
X
X
X
:
:
X
X
X
:
:
:
X
X
X
:
Chart Key
X=
compatible
%start accessories
X ( )= compatible, but additional options/modification may be required; some modifications are
"Dealer-installed only; refer to Kenwood application notes" (no Kenwood install labor code available).
Blank= Not compatible
Gray= Non-applicable
Remarks
(a) The KAP-1 PA/HA relay board requires a KCT-19 to route the PA & HA outputs external of the mobile.
(b) Installing the option in the left-hand column will require the KCT-18 to be routed under the DC cable grommet, stripped /tinned and
soldered directly to the ignition sense input inside the mobile Dealer-installed only; refer to Kenwood application notes.
(c) [80-Series mobile only] This install must share the SB+ and GND connections. The KCT-31 connects to the 80-Series COM1 port only.
Dealer-installed only; refer to Kenwood application notes.
(d) [80-Series mobile only] This install must share the SB+ and GND connections. Dealer-installed only; refer to Kenwood application
notes.The KAP-1 requires a KCT-19.
MOBILE INSTALLATION ACCESSORIES
Horn Alert/P.A. Relay Option (requires KCT-19)
KAP-1
Ignition sense cable (requires KCT-19)
KCT-18
Accessory connector cable (for ignition sense, horn alert, KSP- spkrs, & Data Port)
KCT-19
KGP-2A/2B & KDS-100 Radio Interface Cable for 80-Series Mobiles
KCT-34
KCT-34/35/39/40M Extension Cable; 117.6 inches (9.8 ft)
KCT-36
Line Filter (suppresses alternator whine, 25dB, 25A max).
KLF-2
Mobile mounting bracket (same as supplied)
KMB-6
Key lock adapter (for both KMB-4 & 6)
KMB-10
40.00
13.00
21.00
21.00
42.00
39.50
12.00
25.00
CONTROL STATION INSTALLATION ACCESSORIES
PC Serial Interface cable (80-Series mobile-to-PC connection for FleetSync® )
KCT-31
Control Station Desktop Microphone (8-pin mod. plug)
KMC-9C
Control Station Mounting Case for KPS-15 Power Supplies (mobile mounting hardware included)
KMB-20
70.00
82.00
40.00
For 60G/60HG/62G/62HG/80-series mobiles
KPS-15
KAS-2SFD
DC Switching Power Supply (117/230 VAC; 23A max. continuous, 25A peak)
*Compatible with medium & high power compact mobiles only: 60G/60HG/62G/62HG/80/150Series mobiles; See KMB-20 mounting case
FleetDispatchPRO: FleetSync® messaging dispatch software for PC (Windows®
98/Me/NT/2000/XP compatible) Supports the following FleetSync® features: decodes PTT ID,
decodes Emergency, encode/decodes Status Messages, encodes Short & Long Text Mesages.
167.00
498.00
COMPUTER SYSTEM REQUIREMENTS
- Windows 98/Me/NT/2000/XP OS / Pentium II 450 MHz or better
- 10 MB of hard disk drive space / 64MB RAM / CD ROM Drive / Mouse
- Super VGA color monitor or better / 1024 x 768 or higher resolution setting
- 1 Serial Port (for mobile serial cable)
- 1 Parallel Port (for FleetDispatchPRO hardware key; single PC use only; not LAN compatible)
- Package Contents: CD ROM, Instruction Manual, Hardware Key
MOBILE PC STATION REQUIREMENTS
- FleetSync PC Serial Interface capable (FleetSync enhanced enabled)
- Installed PC Serial Interface Cable (see mobile options/accessories)
- Base Station Desktop Microphone recommended (see mobile options/accessories)
Page 2 of 8
TK-980_981
Jan-06
Last Revised: 01/06/06
Accessories for the TK-980/981 Series Radios
Model
Description
MICROPHONES AND SPEAKERS
External speaker (compact low profile; black case; 3.5 mm phono plug-in)
KES-3
External speaker, 40W max input, blk case; 5"x5"x2-9/16" (requires KCT-19)
KES-5
MIL-SPEC & Noise Canceling dynamic mobile microphone (8-pin mod. plug)
KMC-27A
Standard dynamic mobile microphone (8-pin mod. plug) --- same as supplied with radio
KMC-27B
MIL-SPEC & Noise Canceling dynamic mobile microphone (8-pin mod. plug) w/ DTMF
KMC-28A
Control Station Desktop Microphone (8-pin mod. plug)
KMC-9C
FLEETSYNC® MOBILE DATA TERMINAL See the KDS-100 price pages for detailed information
FleetSync® Data Terminal- Includes mounting bracket, mounting hardware and DC Cable
KDS-100
KCT-34
KCT-36
KPG-71D
KAS-2SFD
AVL UNITS
KGP-2A
KGP-2B
Notes: 80-Series mobiles require the FleetSync® Enhanced option enabled-see L-875. KCT-34 Radio
Interface cable is required. Use a KCT-36 9.8 ft. for an extension cable.
KGP-2A/2B & KDS-100 Radio Interface Cable for 80-Series Mobiles
KCT-34/35/39/40M Extension Cable; 117.6 inches (9.8 ft)
Programming Software for KDS-100 Windows® 95/98/Me
FleetDispatchPRO: FleetSync® messaging dispatch software for PC (Windows®
98/Me/NT/2000/XP compatible) Supports the following FleetSync® features: decodes PTT ID,
decodes Emergency, encode/decodes Status Messages, encodes Short & Long Text Mesages.
See the AVL price pages for detailed information
GPS Receiver / Modem Unit (includes one dash-mount GPS antenna, mounting bracket, screw set
Base Modem Unit
List
42.00
59.00
99.00
40.00
155.00
82.00
595.00
21.00
42.00
99.00
498.00
525.00
225.00
Note: A KGP-2A/2B AVL system requires aftermarket AVL mapping dispatch software -see AVL price pages
KCT-34
KCT-36
KPG-73D
KGP-2A/2B & KDS-100 Radio Interface Cable for 80-Series Mobiles
KCT-34/35/39/40M Extension Cable; 117.6 inches (9.8 ft)
Programming Software for KGP-2A/2B Windows® 95/98/Me
21.00
42.00
99.00
QE-2 G-Star®/ MDC1200 DIGITAL ANI MODULES by Cimarron Technologies
How to Order: Please see QE-2 Information and Order Sheet available from LMR Order Desk
1. Select the proper model/ quantity of radios, desired MDC-1200 (L-901) or G-Star (L-902) ANI format labor code.
2. Refer to the "QE-2 MDC-1200 Information/Order Sheet" available from the LMR Order Desk; select the ID format, ID codes and other feature options
3. Fax the Order Sheet with your radio order to your authorized Kenwood Rep or LMR Order Desk
All order sheet items must be filled out even if the feature option is "disabled" (incomplete Order Sheets will not be processed).
a. QE-2's are Kenwood installed only; these are not available as "shipped loose" (pre-programmed or not).
b. Allow a min. 1 week delivery ARO for 1- 25 units (allow min. 3 weeks for 25 units and up).
Notes:
Emergency "Man-down" features require an installed CAE-3 internal man-down tilt switch option (portables only).
Dealers can purchase a QE-2 programmer , Model QPF-2, direct from Cimarrron Technologies Call 800-487-7184 www.cimtechcorp.com
QE-2
G-Star® or MDC1200 ANI Board : PTT ANI, emergency & man-down
Important Factory Install Only –Order L-901 or L-902
Page 3 of 8
128.00
TK-980_981
Jan-06
Last Revised: 01/06/06
Accessories for the TK-980/981 Series Radios
Model
Description
SERVICE RELATED ACCESSORIES
Mobile Programming interface cable (8-pin mic jack mobiles)
KPG-46
P.C. Programming Software for TK-280/380/480/481/780/880/980/981 V3.00 or higher
KPG-49D
Programming Software for KGP-2A/2B Windows® 95/98/Me
KPG-73D
Call Kenwood Parts at 800-367-7514 to order the following:
*****************
Clone cable
E30-3382-05
Mounting bracket for TK-780/880/980/981 --- same as supplied w/ radio
J29-0627-13
List
N/A
65.00
99.00
13.54
7.04
Installation / Tuning Charges for the TK-980/981 Radios
Model
Description
%start labor codes
Tune TK-780/880/980/981
L-857
Enable FleetSync® Enhanced Option in 80-Series (mobile/portable)
L-875
Install firmware & enable NPSPAC operation in TK-980
L-889
L-901
L-902
L-905
L-906
L-907
L-929
Note: NPSPAC and PassPort capabilty are not available in the same firmware option.
Program and install QE-2 MDC1200 Encoder
Program and install QE-2 G-Star® Encoder
FleetSync® enhanced option (field retrofit) (order qty. bet. 1-24). Must order SRB08698 Hardware Key
also; requires KPG-65ED
FleetSync® enhanced option (field retrofit) (order qty. bet. 25-99). Must order SRB08698 Hardware Key
also; requires KPG-65ED
FleetSync® enhanced option (field retrofit) (order qty. 100+). Must order SRB08698 Hardware Key also;
requires KPG-65ED
Install KCT-34 to 80-Series mobile for KGP-2A/2B interface (order KCT-34 separately)
Page 4 of 8
List
25.00
50.00
84.00
75.00
75.00
50.00
50.00
50.00
21.00
TK-980_981
Jan-06
Last Revised: 01/06/06
FleetSync® General Information
The 40, 50 & 80-Series radio firmwares include both the full set of FleetSync® Basic and FleetSync® Enhanced feature sets. However, the
TK-2140/3140 & the TK-480/481/980/981 radios require the "FleetSync® Enhanced" Option to be ordered to "enable" the enhanced
feature set. As of 10/01/02, the TK-280/380/780/880/7150/8150 come with the FleetSync® enhanced option pre-enabled.
FleetSync® Basic - "Basic" features are available in each radio as shipped from Kenwood (no actitvation is required). The entire
Basic feature set is designed to operate between FleetSync® base and fleet radios (within the limitations of the radio controls and LCD
display capabilities). Some Basic feature sets require a vendor-supplied base dispatch hardware and/or software for practical dispatch
operations.
~ PTT ANI (fleet portables/mobiles) - digital ANI sent on each PTT using the FleetSync® ID.
1
~ Caller ID / Caller ID Stack (portables/mobiles)- decodes an incoming PTT ID and displays the caller alphanumeric tag; Caller ID Stack
stores the last 3 calls for review.
2
~ Selective Call (portables/mobiles) - allows base-to-fleet and fleet-to-fleet selective calling via a pre-stored 100 ID list. Each ID can have
an 16 character alphanumeric tag for easy selection and Caller ID recognition.
3
~ Status Messaging (portables/mobiles)- provides up to 50 pre-stored sixteen-character alphanumeric messagespermitting a base to
send a larger variety of job-type messages and fleet radios to display and respond accordingly with complimentary acknowledgements
(includes special reserved Emergency, Emergency Man-down*, Emergency Mode Off *, Horn Alert (mobiles)* and Radio
Stun/Acknowledge/Resurrect statuses are available).
1
80-Series: starting with Ver. 2.0 radios;
2
80-Series: starting with Version 2.0 radios only; previous versions had a 32 ID capacity;
3
80-Series: starting in Version 2.0 radios only; previous versions had a 32 Status Message capacity
FleetSync® Enhanced Option- The FleetSync® Enhanced Option, if not already pre-enabeld, must be "enabled" in the radio
by ordering the appropriate labor codes for a Kenwood install or ordering the appropriate quantities of FS Enhanced options loaded in
hardware key(s) and a KPG-65ED as a dealer field retrofit kit (see model price lists). This enables the following Enhanced features in
addition to the Basic feature set:
~ PC Serial Control (mobiles only)- PC Serial Interface enables serial line communications between an 80-Series mobile radio and a
FleetSync® compatible computer software application or peripheral device (enables the serial COM port I/O's of an 80-Series mobile) such
as CAD/messaging, AVL/messaging software and devices such as status messaging units, desktop ANI encoder/decoder units and mobile
data terminals (check with vendor).
~ Short Text Messaging (portables/mobiles)- decodes, stores and displays in the radio up to four 48-character Short Text messages
~ Long Text Messaging (mobiles only)- decodes and stores one 1024-character message for output to an external KDS-100 or decodedisplay device. A Long Text message is NOT stored in mobile memory or displayed in the mobiles LCD.
~ FleetSync® GPS Data (mobiles only; requires special modifications)- FleetSync® Enhanced option enables a FleetSync mobile to use
the NMEA-0183 GPS serial data output (in RS-232C format) from a GPS receiver and send this data in the FleetSync® air protocol data
format (the type GPS data sent is programmable in the mobile). This requires the FleetSync® Enhanced option in both fleet and base
mobiles; an aftermarket GPS receiver (internal or external); special hardware modifications to connect the GPS receiver. Call Kenwood
techncial support for GPS receiver application notes and see Manning Rastrac information in the AVL price pages for software.
Page 5 of 8
TK-980_981
Jan-06
Last Revised: 01/06/06
FleetSync® for 80-Series Portables & Mobiles
Installation / Tuning Charges
Model
Description
To program all 80-Series radio parameters (including FleetSync parameters):
Portable Programming interface cable
KPG-36
Mobile Programming interface cable (8-pin mic jack mobiles)
KPG-46
P.C. Programming Software for TK-280/380/780/880/980/981 & TK-480/480
KPG-49D
List
N/A
181.67
65.00
Kenwood-installed FleetSync® Enhanced Option
FleetSync® Enhanced Option- enable in 80-Series (mobile/portable)
L-875
50.00
Dealer-installed FleetSync® Enhanced Options
Note:
Instead of L-875, options L-905/906/907; SRB08698 Hardware Key and KPG-65ED can be purchased for dealer field installation of the FleetSync®
Enhanced option
L-905
FleetSync® Enhanced Option (field retrofit) for 80-series; Price each for qty. 1-24
50.00
Note:
Must order SRB08698 Hardware Key also; requires KPG-65ED
L-906
FleetSync® Enhanced Option (field retrofit) for 80-series; Price each for qty. 25-99
50.00
Note:
Must order SRB08698 Hardware Key also; requires KPG-65ED
L-907
FleetSync® Enhanced Option (field retrofit) for 80-series; Price each for qty. 100+
50.00
Note:
Must order SRB08698 Hardware Key which holds 100 ESN's maximium; multiple keys must be oders over 100. Also requires KPG-65ED.
SRB08698
2
83.33
Hardware Key (Sentinel Super Pro)
Note:
SRB08698 hardware key holds 100 ESN's maximum; multiple keys must be purchased for orders over 100.
KPG-65ED
3
10.00
FleetSync® Enhanced Option Installation Software
Note:
Required for L-905/906/907 & SRB08698 use. This software is re-usable on future orders of L-905/906/90
Cable/options to connect an 80-Series base/control mobile to a PC
PC Serial Interface cable (80-Series mobile-to-PC connection for FleetSync® )
KCT-31
L-918
Order L-918 for Kenwood installation
Install KCT-31 in 80-Series mobile (order KCT-31 separately)
Page 6 of 8
70.00
21.00
TK-980_981
Jan-06
Last Revised: 01/06/06
Option Notes:
1. KPG-49D: As of June 2001, 80-Series "Version 2.0" radio productions were released (see LMR Sales Bulletin I-01-26LM for details).
~ KPG-49D V3.XX programming software is required for Version 2.0 radios. KPG-49D V3.XX programming software will program all early
(pre-VER 2.0) radios except the early TK-480/481 production (the KPG-35D must be used). On all other models, the 2-tone data defaults to
factory settings and will require re-entry.
~ KPG-49D V2.XX or earlier will not program any new Version 2.0 radios. V2.XX programs pre-Version 2.0 radios that were the first version
to include FleetSync (TK-280/380/780/880/980/981-production starting 7/99 and TK-980/981 production starting 3/99).
~ KPG-49D V1.XX should be retained to program older TK-280/380/780/880 radios that do not have FleetSync® capability; the KPG-35D
V1.XX should be used to program earlier TK-480/481 radios that do not have FleetSync.
2. The SRB08698 hardware key requires L-905, 906 or 907 options to be loaded into it. The hardware key requires the KPG-65ED to activate
FleetSync® Enhanced Options in an 80-Series radio. The SRB08698 hardware key can be returned when empty for 50% credit. Call the LMR
order desk for an RMA#. Credit will NOT be issued for the L-905/906/907 options.
3. The KPG-65ED is a one-time order and may be re-used on future orders of L-905/906/907. The SRB08698 hardware key must be
installed on the PC parallel port for the KPG-65ED to operate.
PassPort® Options (Kenwood-installed)
FOR NEW RADIO ORDERS ONLY
Ordering Instructions
For 800/900 MHz models TK-480/481/980/981 new radio orders, the Kenwood-installed Passport® ESN / firmware option is available for a
charge:
1. Order the ESN/Firmware option per L-876, L-877 or L-878
Other required items:
a. KPG-63D Radio Programming Software: the KPG-63D is required to program all PassPort® parameters for all PassPort® enabled radios, the KPG63D will not program LTR or conventional parameters.
b. KPG-49D is required only if LTR or conventional systems are to also be programmed in the PassPort® radio.
Model
Labor Code
L-876
L-877
L-878
L-938
Description
Install PassPort® ESN options and firmware in TK-480/481/980/981
· 1-24 qty. lot price; Price is per ESN
· The latest PassPort® radio firmware will be installed
Install PassPort® ESN options and firmware
· 25-99 qty. lot price; Price is per ESN
· The latest PassPort® radio firmware will be installed
Install PassPort® ESN options and firmware
· 100 qty. lot price; Price is per ESN
· The latest PassPort® radio firmware will be installed
Install PassPort® ESN options and firmware in TK-380/880 models (with new radios purchases beginning
10/1/02)
PassPort® Radio Programming Software
PassPort® Radio Programming Software V2.00 or higher
KPG-63D
List
$68.00
68.00
68.00
0.00
65.00
Page 7 of 8
TK-980_981
Jan-06
Last Revised: 01/06/06
PassPort® Options (Field-installation kits)
FOR DEALER / OPERATOR FIELD CONVERSIONS
Ordering Instructions
1. Order the ESN key/firmware Labor Code options: L-892, L-893 or L-894; specify model radio(s).
Pre-loaded ESN hardware key(s) with the ordered quantities of ESN's and a PassPort® radio firmware diskette will be shipped (100 ESN’s
maximum per hardware key). Important: Any depleted key previously registered to a technicians computer must be retained to
register any new purchased key to the computer; please retain the old key until the new one is received.
2. Other required items:
a. KPG-64D: PassPort® ESN Install Program: the KPG-64D only needs to be ordered one time. It is re-usable for subsequent ESN orders (unless an
upgrade is recommended).
b. KPG-63D Radio Programming Software: required to program all PassPort parameters for all PassPort® enabled radios, the KPG-63D will not
program LTR or conventional parameters.
c. KPG-49D Radio Programming Software: required only if LTR or conventional systems are also tbe programmed in the PassPort® radio.
2
3. The KPG-49D radio programming software is required for LTR & conventional site programming.
Model
Description
List
L-892
PassPort® ESN Options & PassPort® firmware disk (SPECIFY RADIO MODEL)
$68.00
· 1-24 qty. lot price; Price is per ESN
PassPort® ESN Options & PassPort® firmware disk (SPECIFY RADIO MODEL)
L-893
68.00
· 25-99 qty. lot price; Price is per ESN
PassPort®
ESN
Options
&
PassPort®
firmware
disk
(SPECIFY
RADIO
MODEL)
L-894
68.00
· 100 qty lot price; Price is per ESN
· Maximum 100 ESN options per hardware key
Note: Sales of L-892, 893, 894 are NOT refundable. Purchaser has a 72 hour limit after receipt to report suspected hardware key defects or ESN shortages to Kenwood
engineering, Suwanee office 678-474-4700
SRB08698
83.33
Hardware Key (Sentinel Super Pro)
NOTES:
· Requires purchase of L-892, 893 or 894
· Sales of L-892, 893, 894 are NOT refundable
· Maximum 100 ESNs per hardware key
· Requires KPG-64D to download PassPort ® ESN options into an 80-Series radio.
· Important: The hardware key is registered to the computer that it is first used on; it cannot be used on other computers.
· Empty hardware keys can be returned for 50% credit; call the LMR order desk for RMA #.
· Important: Retain depleted keys until a new one is received. It will be required to register the new key to the same computer.
KPG-64D
PassPort® ESN Field Installation Software V1.12
· V1.12: supercedes V1.11; upgrade to V1.12 recommended for improved ESN file database features
10.00
KPG-63D
PassPort® Radio Programming Software V2.00 or higher
65.00
Page 8 of 8
TK-980_981
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising