Standard Rack - Chatsworth Products, Inc.

Standard Rack - Chatsworth Products, Inc.
PRODUCT DATA SHEET
Protecting your technology investment.
Standard Rack
High quality, cost-effective
California
OSHPD
OPM-0112-13
storage solution for patch
ADVANTAGES
panels and network switches.
Easy Equipment
Installation
Marked and numbered rack-mount
spaces (U)
The small footprint makes
Standard Rack the best choice
in many telecommunications
and equipment rooms,
Prepared Grounding
Location
Built-in attachment point for a
ground (earthing) connection
especially where floor space
is limited.
KEY FEATURES
•Supports 19” EIA rack-mount equipment
designed for two-post panel mounting, like
patch panels and network switches.
•Easy positioning of equipment with marked
and numbered U.
•Quick attachment of equipment with
threaded equipment mounting holes and
included equipment-mounting screws.
•Delivers unassembled in a single carton—
quick and easy bolt-together assembly takes
less than 10 minutes.
•Lightweight aluminum construction for easy
transport and positioning during installation.
• Integrated grounding with a built-in
attachment point for a ground (earthing)
connection.
•Quickly attach any CPI vertical cable manager
to the side of the rack through pre-punched
web channel holes.
•Floor-mount holes on the base angles make
it easy to secure the rack to the floor with
a concrete, wood or raised floor installation
kit.
SPECIFICATIONS
Heights: 84” (2.1 m), 96” (2.4 m), 108”, (2.7 m)
Available Sizes
Width: 20.3” (516.1 mm)
Depth: 15” (381 mm)
Heights: 45U, 51U, 58U
Equipment Space
Width: 19” EIA (17-3/4” clearance)
Depth: 20” (508 mm)
Note: Double-sided shelves for 26”D (660.4 mm) equipment are available.
Use QuadraRack™ 4-Post Frame when rack-mount equipment exceeds 20”D (508 mm).
1 pair C-shaped equipment mounting channels fixed in place
19”W, EIA-310-D compliant
Equipment Support
Load Capacity
Grounding/Bonding
Certifications
Material
Construction
Universal hole pattern, 5/8”-5/8”-1/2” (15.9 mm x 15.9 mm x 12.7 mm) vertical hole spacing
Threaded #12-24 equipment mounting holes; includes 50 each #12-24 equipment mounting
screws
1000 lb (453.6 kg) of equipment
Top angles, base angles and side channels are electrically bonded by assembly hardware
A masked mounting location for a ground lug with two 1/4-20 threaded studs spaced 5/8" apart
is provided inside the side channel, near the top and bottom of the rack
Use Grounding Jumper (PN 40159-008) as a rack bonding conductor
EIA-310-D compliant; UL and cUL Listed as a communications circuit accessory
OSHPD Preapproval of Manufacturer's Certification (OPM-0261-13)
Aluminum extrusion
Bolted assembly
Ships unassembled
Clear grained aluminum or Epoxy-polyester hybrid powder coat paint
Finish
Environment
Available in Black, Gray, Computer Beige or Glacier White
For indoor use only, in environmentally controlled areas; may not be used outdoors, in industrial
or harsh environments or in plenum spaces.
Availability: Global
US & Canada
+1-800-834-4969
Toronto, Ontario, Canada
+905-850-7770
chatsworth.com
techsupport@chatsworth.com
Latin America
+52-55-5203-7525
Toll Free within Mexico
01-800-01-7592
chatsworth.com.co
Europe
+44-1628-524-834
chatsworthproducts.co.uk
Middle East & Africa
Dubai, UAE
+971-4-2602125
chatsworth.ae
Asia Pacific
+86 21 6880-0266
chatsworth.com.cn
PRODUCT DATA SHEET
STANDARD RACK
DIMENSIONS
Application
The Standard Rack is a high-quality, cost-effective storage solution for patch
panels and network switches that use less floor space than a cabinet or a
four-post rack. The small 20.3”W x 15”D (516.1 mm x 381 mm) footprint makes
Standard Rack the best choice in many telecommunications and equipment
rooms, especially where floor space is limited.
Specifications
The Standard Rack meets project specifications, will hold 1,000 lb (453.1 kg) of
equipment, has integrated grounding and i­s UL Listed as a communications circuit
accessory. Support 19” W EIA rack-mount equipment or shelves with the Standard
Rack, which is available in three heights. Equipment attaches to the front or rear
of the 3” D (80 mm) vertical mounting channels with screws. Mounting positions
are marked and numbered, making it easy to position and install equipment or
shelves.
Assembly
Racks deliver unassembled in a compact carton and are easy to assemble.
Components bolt together with included hardware; assembly takes approximately
10 minutes. Two-post racks must be secured to building structure. The Standard
Rack has pre-punched base angles, making it easy to attach the rack to the floor
using a CPI installation kit for wood, slab or raised floors.
Cable Management
Because most Standard Rack applications require cable management, CPI’s
vertical cable managers attach directly to the side of the Standard Rack. Vertical
cable managers organize cables by U simplifying future moves, adds and changes
to the network. The best solution includes horizontal managers in-between patch
panels and network switches to fan patch cords into individual port connections.
Contact CPI Technical Support for configuration assistance.
7’ ( 2.1 m) Rack Shown
USE WITH
ORDERING INFORMATION
•Velocity® Cable Management
•Rack and Frame Installation Kit
•Raised Floor Rack Support For 3”
(80 mm) Channel
Part
Number
Description
Shipping
Weight
lb (kg)
55053-X03
7’H (2.1 m) x 19”W, 45U
31 (14.1)
55053-X15
8’H (2.4 m) x 19”W, 52U
37 (16.8)
55053-X08
9’H (2.7 m) x 19”W, 58U
40 (18.1)
X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White
RELATED PRODUCTS
•3” (80 mm) Channel Rack-To-Runway
Mounting Plate
•Vertical PDUs for Racks
Scan or click here to visit
our CPI Online Catalog.
•Rack Shelves
For product CSI Specs, visit the Support & Downloads page on www.chatsworth.com.
While every effort has been made to ensure the accuracy of all information, CPI does not accept liability for any errors or
omissions and reserves the right to change information and descriptions of listed services and products.
©2016 Chatsworth Products, Inc. All rights reserved. Chatsworth Products, CPI, CPI Passive Cooling, eConnect, MegaFrame,
Saf-T-Grip, Seismic Frame, SlimFrame, TeraFrame, GlobalFrame, CUBE-iT PLUS, Evolution, OnTrac, QuadraRack and Velocity
are federally registered trademarks of Chatsworth Products. Simply Efficient, Secure Array and Clik-Nut are trademarks of
Chatsworth Products.All other trademarks belong to their respective companies. Rev.8 08/16 MKT-60020-317
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising