FLM‑325‑2I4 Dual Input Monitor
Fire Alarm Systems | FLM‑325‑2I4 Dual Input Monitor
FLM‑325‑2I4 Dual Input Monitor
www.boschsecurity.com
The FLM‑325‑2I4 Dual Input Monitor Module provides
two independent contact monitoring circuits while
only utilizing one address on the SLC loop. The
module can be programmed to monitor Normally Open
(NO) or Normally Closed (NC) dry contact types of fire
alarm and supervisory devices such as pull stations or
water flow devices.
It fits into a standard 4‑inch square or double‑gang
electrical back box.
Functions
Status display
The DIMM has a bi‑colored LED that flashes every time
the module is polled and can be switched on steady
when the module goes into active condition.
u
Two independent contact monitoring circuits
u
Monitors Normally Open (NO) or Normally
Closed (NC) contacts
u
Monitored Normally Open (NO) contacts can be
configured with or without EOL resistor
u
Module address programming with the D5070
Analog Device Programmer between 1‑127
u
Bicolored LED provides module status
Installation/configuration notes
Compatibility Information
The following products are compatible with the
FLM‑325‑2I4 Dual Input Monitor Module:
Category
Product ID
Product Description
Fire Panels
FPA‑1000
Analog Addressable Fire Panels
Programmer
D5070
Analog Device Programmer
Wiring
Install the FLM‑325‑2I4 Dual Input Monitor Module
with the following maximum distances to the EOL
resistor depending on the wirings:
Wirings
Distances
Certifications and approvals
14 AWG (ISO 2.5 mm2)
1500 ft (457 m)
Region
16 AWG (ISO 1.5 mm )
900 ft (274 m)
18 AWG (ISO 0.75 mm )
550 ft (167 m)
USA
Certification
UL
UOXX: Control Unit Accessories, System
(ANSI/UL 864)
CSFM
see our website
FDNYCoA
#6101
2
2
Parts included
Quant.
Component
1
FLM‑325‑2I4 Dual Input Monitor Module
2 | FLM‑325‑2I4 Dual Input Monitor
2
EOL resistor 22 kΩ
1
Wall plate
1
Literature pack
Technical specifications
Electrical
Operating Voltage
17 VDC to 41 VDC
Current Consumption
• Standby
0.6 mA
• Active (without LED)
0.6 mA
• Active (LED on)
30 mA
Mechanical
Dimensions (H x W x D)
4.7 in. x 4.2 in. x 1.4 in.
(11.9 cm x 10.7 cm x 3.6 cm)
Bicolored LED
Red and green
Environmental
Operating Temperature
+32°F to +120°F (0°C to +49°C)
Relative Humidity
90 %, non‑condensing
Ordering information
FLM‑325‑2I4 Dual Input Monitor
Provides two independent contact monitoring circuits
to monitor Normally Open (NO) or Normally Closed
(NC) dry contact types of fire alarm devices
Order number FLM-325-2I4
Represented by:
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
© Bosch Security Systems 2014 | Data subject to change without notice
2690678027 | en, V6, 24. Jul 2014
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
apr.securitysystems@bosch.com
www.boschsecurity.asia
China:
America Latina:
Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
201 Building, No. 333 Fuquan Road
Via Anhanguera, Km 98
North IBP
CEP 13065-900
Changning District, Shanghai
Campinas, Sao Paulo, Brazil
200335 China
Phone: +55 19 2103 2860
Phone +86 21 22181111
Fax: +55 19 2103 2862
Fax: +86 21 22182398
latam.boschsecurity@bosch.com
www.boschsecurity.com.cn
www.boschsecurity.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising