GST BROCHURE CORR Pagination - Fire alarm system, Access

GST BROCHURE CORR Pagination - Fire alarm system, Access
Global System Technology(UK) PLC
The Intelligent Solution
MANUFACTURED IN ACCORDANCE WITH
Part Number
Intelligent Photoelectric Smoke Detector
•
•
•
•
•
•
•
I-9102
Aesthetically pleasing Low profile design
8 Bit intelligent processor with A/D converter
Built in algorithm maps for false alarm rejection.
Electronically addressed
Sensitivity adjustable via hand held programming tool.
Removable Optical chamber for easy cleaning and maintenance.
Conventional detector version also available (C-9102)
Technical Specifications
•
Operating voltage: Loop 24V
•
Operating current
Standby current: ≤ 600µA
Alarm current ≤ 2mA
•
Operating environment:
Temperature :- 10ºC ~+ 50ºC
Relative humidity: ≤95%
•
Dimension: Diameter: 10cm Height: 5cm
Intelligent Dual Heat Detector
I-9103
•
•
•
•
•
Fixed Temperature and Rate of Rise Detection
Aesthetically pleasing Low profile design
8 Bit intelligent processor with A/D converter
Electronically addressed
Fixed Temperature response is adjustable via hand held programming tool
between 58ºC and 74ºC
• Conventional detector version also available (C-9103)
Technical Specifications
•
Operating voltage: Loop 24V
•
Operating current:
Standby current: ≤ 800µA
Alarm current ≤ 1.4mA
•
Operating environment:
Temperature:- 10ºC ~+ 50ºC
Relative humidity: ≤95%
•
Dimension: Diameter: 10cm Height: 5cm
Intelligent Ultraviolet Flame Detector
•
•
•
•
•
•
Sensitive Ultraviolet sensor that detects the UV rays produced by a flame
Not effected by sunlight.
Aesthetically pleasing Low profile design
Dust / corrosion / Humidity resistant.
Electronically addressed
Conventional detector version also available (C-9104)
Technical Specifications
•
Operating voltage: Loop 24V
•
Operating current:
Standby current: ≤ 1.5mA
Alarm current ≤ 10mA
•
Operating environment:
Temperature:- 10ºC ~+ 50ºC
Relative humidity: ≤95%
1
•
Detection Angle:≤80 Degree
•
Dimension: Diameter: 10cm Height: 5cm
I-9104
Part Number
Combined Optical / Heat Detector
I-9101
• Combining all the features of the I-9102 Optical and the I-9103 Dual
heat detector to provide the ultimate cover for life safety systems
• Conventional detector version also available (C-9101)
Technical Specifications
•
Operating voltage: Loop 24V
•
Operating current:
Standby current: ≤ 800µA
Alarm current ≤ 2mA
•
Operating environment:
Temperature:- 10ºC ~+ 50ºC
Relative humidity: ≤95%
•
Dimension: Diameter: 10cm Height: 5cm
Intelligent Linear Beam Detector
I-9105
• Suitable for detection coverage of atriums and warehouses, factories, tunnels
• Range 10-100 metres
• Alignment indication LEDs and adjustable pivot base for easy beam alignment
• Reduced installation costs due to intelligent addressable control (no
requirement for local control interfacing and reset)
• 8 Bit intelligent processor with algorithm maps for false alarm rejection
• Electronically addressed
• Conventional detector version also available (C-9105)
Technical Specifications
•
Operating voltage: Loop 24V
•
Operating current:
Standby current:≤1mA
Alarm current: 2.5mA
•
Detection Range: Length from 10 to 100 meters, width 15 meters.
•
Wiring: Non-polarized two-core 24VDC for emitter
Non-polarized two-core loop for receiver
•
Operating environment:
Temperature: -10°C~+ 50°C
Relative humidity: ≤92%
Standard Detector Base
DZ-03
• Non polarised terminals and multi-positioning design allows easy
direction adjustment of the detector
• Compatible with GST conventional detectors
• Diode base version (DZ-03D) for conventional detectors with Active
End Of Line(P-9907)
2
Part Number
Intelligent Manual Call Point
I-9201
• Addressable Manual Call Point (MCP) with re-settable (non breaking) Glass
• Additional volt free contacts for local interfacing (i.e. PTZ camera preset)
• Two part plug-in construction with base mounted termination allows easy
installation and connection
• Intelligent MCP can be addressed and plugged in to base at time of commissioning
• Electronically addressed
• Suitable for Semi-Flush and surface mount installation
• Conventional MCP version also available (C-9201)
Technical Specifications
•
Operating Voltage: Loop 24V
•
Operating Current:
Monitoring Current: ≤0.8mA
Alarming Current: ≤2mA
•
N/O Output Contact: Rating Value 60VDC, 0.1A
Contact Resistance ≤100mΩ
•
Operating Environment:
Temperature: -10°C~+ 50°C
Relative Humidity: ≤95%
•
Dimension: 90mmX122mmX48.5mm
Handheld Programmer
P-9910
• Portable programming tool for addressing and testing of intelligent devices
• Programs all loop devices (1-242 addresses per loop)
• Interrogates device for Condition - Manufacturing Batch Number - Date of
manufacture - alarm sensitivity
• Reprogram facility enables adjustment to alarm threshold of detectors.
Short Circuit Isolator
• Isolates faulty part of the loop in the event of a short circuit
• Automatically resetting once the fault has cleared
• LED status Indicator
• Also available as Isolator base version that directly replaces the
standard detector base (C-9502)
• Also Compatible with Conventional detection Circuits
Technical Specifications
•
Operating Voltage: Loop 24V
Action Current: ≤170mA
•
Operating Environment:
Temperature: -10°C~+ 50°C
Relative Humidity: ≤95%
•
3
Dimension: 120mmX80mmX40mm
C-9503
Part Number
Intelligent Combustible Gas Detector
I-9601/2
• Available for LPG, Natural gas and Coal Gas.
• Built-in relay contacts for control of gas valves / Extract etc (I-9602)
• Built-in buzzer for local alarm
• Manual reset and control (on/off) of relay contacts
• Electronically addressed
• Conventional detector version also available (C-9601)&(C-9602)
Technical Specifications
•
Operating voltage: Loop 24V
•
Operating Consumption:≤1.5Watt
•
Alarm Level: Pre-alarm 12%LEL
Urgent Alarm: 23%LEL
•
Output:
K1/K2, N/O contact, 3A/220VAC, active when pre-alarm
V1/V2, active output. 3A/5VDC, start when full alarm
•
Wiring:
Non-polarised two-core for loop
Non-polarised two-core for 24VDC power supply
•
Operating environment:
Temperature:- 10ºC ~+ 50ºC
Relative Humidity: ≤95%
Intelligent Input Module
I-9300
• Monitors switch contacts of remote equipment
• Two part plug-in construction with base mounted termination allows easy
installation and connection
• Intelligent interface can be addressed and plugged in to base at time of
commissioning
• Electronically addressed
• For surface mount cable installations use surface mount interface back
box (SMIBB-1)
Technical Specifications
•
Operating Voltage: Loop 24V
•
Operating Current:
Standby Current ≤1mA
Action Current: ≤5mA
•
Operating Environment:
Temperature: -10°C~+ 50°C
Relative Humidity: ≤95%
•
Dimension: 120mmX80mmX40mm
Interposing Relay Module
C-9302
• A/C relay interface, used in conjunction with intelligent I/O module to
interface with 220 volt equipment
• Two part plug-in construction with base mounted termination allows easy
installation and connection
• Interface can be plugged in to base at time of commissioning
• For surface mount cable installations use surface mount interface back
box (SMIBB-1)
• Can be used with conventional alarm circuits
4
Part Number
Intelligent Single Input /Output Module
• Addressable I/O with 24V /3Amp relay contacts
I-9301
• Confirmation input to confirm to fire alarm panel the equipment
controlled by the interface and responded when activated
• Two part plug-in construction with base mounted termination allows easy
installation and connection
• Intelligent interface can be addressed and plugged in to base at time of
commissioning
• Electronically addressed
• For surface mount cable installations use surface mount interface back
box (SMIBB-1)
Technical Specifications
•
Operating Voltage: Loop 24V
•
Operating Current:
Standby Current ≤1mA
Action Current: ≤5mA
•
Wiring:
Non-polarised two-core for loop
Non-polarised two-core for 24VDC power supply
•
Operating Environment:
Temperature: -10°C~+ 50°C
Relative Humidity: ≤95%
•
Dimension: 120mmX80mmX40mm
Intelligent Security Interface
I-9306
• Integrates standard security devices into the alarm network
• 24 to 12volt (DC) step-down for powering of security devices
• Two part plug-in construction with base mounted termination allows easy
installation and connection
• Intelligent interface can be addressed and plugged in to base at time of
commissioning
• Electronically addressed
• For surface mount cable installations use surface mount interface back box
Intelligent Remote Indicator
• Intelligent Addressable Remote indicator
• Can be program linked to any single or group of devices
• High Intensity flashing LED in alarm condition
• Electronically addressed
• Conventional version also available (C-9314)
5
I-9314
Part Number
Intelligent Zone Monitor Unit
I-9319
• Interfaces with conventional fire detection equipment
• Can connect up to 15 detectors
• Can connect to Sprinkler Zone Valve and Flow Switch
• Can interface Conventional Fire Devices onto an Addressable Loop
• Electronically addressed
Technical Specifications
•
Operating Voltage: Loop 24V
•
Operating Current:
Monitoring Current ≤0.5mA
Action Current: ≤5mA
•
Capability: 15 conventional detectors
•
End of line: 4.7kΩ resistor or AEOL
•
Action Resistor: 470~680Ω
•
Operating Environment:
Temperature: -10°C~+ 50°C
Relative Humidity: ≤95%
•
Dimension: 120mmX80mmX40mm
Intelligent Sounder Driver
I-9308
• The Driver for non-addressable sounders/bells
• Two addresses for Alert and Evacuate Control
• Two part plug-in construction with base mounted termination allows easy
installation and connection
• Intelligent interface can be addressed and plugged in to base at time of
commissioning
• Electronically Addressed
Technical Specifications
•
Operating Voltage: Loop 24V
•
Operating Current:
Standby Current ≤1mA
•
Output: Maximum 1A, polarized
•
End of line: 10kΩ resistor
•
Operating Environment:
Temperature: -10°C~+ 50°C
Relative Humidity: ≤95%
•
Dimension: 120mmX80mmX40mm
6
Part Number
Intelligent Sounder Beacon
I-9401
• Addressable combined flashing beacon and sounder
• Two part plug-in construction with base mounted termination allows easy
installation and connection
• Intelligent interface can be addressed and plugged in to base at time of
commissioning
• Electronically addressed
• Conventional version also available (C-9401)
Technical Specifications
•
Operating Voltage: Loop 24V
•
Operating Current:
24VDC:
Standby Current: ≤10mA; Alarming Current: ≤160mA;
Loop: Standby Current: ≤0.8mA; Alarming Current: ≤6.0mA;
•
Alarm volume (SPL): ≥95dB @1 Meter.
•
Wiring:
Non-polarised two-core for loop
Non-polarised two-core for 24VDC power supply
•
Operating Environment:
Temperature: -10°C~+ 50°C
Relative Humidity: ≤95%
•
Dimension: 144mmX90mmX57mm
Sounder Base
• Base Mounted Sounder.
• Can be used as a common base of detector or stand alone with a cover.
• No need of extra power supply.
• Two addresses for Alert and Evacuate Control.
• Conventional Version also available (C-9402)
Technical Specifications
•
Operating Voltage: Loop 24V
•
Operating Current:
Standby Current ≤1mA
Action Current: ≤15mA
•
Alarm volume (SPL): ≥85dB @1 Meter.
•
Operating Environment:
Temperature: -10°C~+ 50°C
Relative Humidity: ≤95%
•
7
Dimension: Diameter: 10cm Height: 3.5cm (without cover), 4.5cm (with cover)
I-9402
Part Number
Intelligent Single Loop Fire Alarm Panel
GST200-30
• Single Loop addressable fire detection panel packed with features not
usually associated with smaller systems, providing a high quality solution
at exceptional good value.
• Loop capacity 235 intelligent devices.
• Graphical LCD Display.
• 30 Zone indication and manual intervention panel
• Networkable with all GST Fire panels
• Programmable from PC.
• Built-in gas extinguishing control.
• Integrated Security alarm facilities
• Optional Colour Graphics
• Optional Fireman's Control panel
• Optional Panel Printer
• Advanced user friendly programming software including 'Fuzzy Logic'
Technical Specifications
•
Power supply:AC220V 50/60Hz
•
Operating Environment:
Temperature: -10°C~+ 40°C
Relative Humidity: ≤95%
•
Dimension: 400mmX560mmX178mm
8
Part Number
Intelligent Two Loop Fire Alarm Panel
(Expandable to 4 Loops)
GST-500
• Two Loop addressable fire detection with integrated controls providing
the perfect solution for all medium sized projects
• Loop capacity 242 intelligent devices. (Total 484 addressable points)
• Large Graphical LCD Display.
• 30 Zone indication and manual intervention panel
• Networkable with all GST Fire panels
• Programmable form PC or via on board keypad.
• Built-in gas extinguishing control.
• Integrated Security alarm facilities
• Optional Fireman's Control panel
• Panel Printer
• Optional Colour graphics
• Advanced user friendly programming software including 'Fuzzy Logic'.
• 4-Loop Version Available (Maximum 700 devices on Loop)
Technical Specifications
•
Power supply:AC220V 50/60Hz
•
Operating Environment:
Temperature: -10°C~+ 40°C
Relative Humidity: ≤95%
•
Dimension: 500mmX700mmX170mm
Graphical User Interface
• Colour graphic control and display system, providing a complete window on
to the fire detection system and network along with additional integrated
and ancillary equipment i.e. Fire telephone and voice alarm.
• Compatible with all GST Intelligent fire panels
• Multi-level password control for convenient system management
9
GUI
Part Number
Intelligent Modular 1-20 Loop Fire Alarm System
• The larger brother to the GST 500, this fire command system, with
GST5000
modular loop cards expandable to 20 loops and integrated controls
enables full integration with GST Voice alarm and fire telephone
systems. Housed in either rack or console type housings provides the
perfect solution for all medium to large systems
• Loop capacity 242 intelligent devices (up to 4840 addressable points)
• Large Graphical LCD Display.
• Zone indication and manual intervention control
• Networkable with all GST Fire panels
• Programmable form PC or via on board keypad.
• Built-in gas extinguishing control.
• Integrated Security alarm facilities
• Optional Fireman's Control panel
• Panel Printer
• Optional Colour graphics
• Advanced user friendly programming software including 'Fuzzy Logic'
• Total integration with GST addressable Voice alarm systems.
• Total integration with GST addressable Fire Telephone systems.
Technical Specifications
•
Power supply:AC220V 50/60Hz
•
Operating Environment:
Temperature: -10°C~+ 40°C
Relative Humidity: ≤95%
•
Dimension: 580mmX520mmX18730mm
10
Part Number
Intelligent 128 Loop Fire Alarm System
• The Flag ship in the GST range of Fire command centres, With its large
touch screen colour graphic LCD control panel expandable up to 128
loops, and full integration with the GST range of intelligent Voice alarm and
Fire telephone solutions systems. Networkable control via the LON works
network, enabling total integration with the GST building management
systems providing a seamless complete control system for the most
demanding of projects
• Loop capacity 242 intelligent devices. (up to 30,000 addressable points)
• Large Touch Screen Colour Graphic LCD Display
• Zone indication and manual intervention control
• Lon Works Network facilities
• Built-in gas extinguishing control
• Integrated Security alarm facilities
• Colour graphics
• Advanced user friendly programming software including 'Fuzzy Logic'
• Total integration with GST addressable Voice alarm systems.
• Total integration with GST addressable Fire Telephone systems.
• Integrated with GST Intelligent Building Management system
11
GST8000
Part Number
Intelligent Modular 1-40 Loop Fire Alarm System
GST6000
• With onboard Color Graphic
• Optional Touch Screen Control
LCD Repeater Panel
GST852RP
• Aesthetically pleasing design with large LCD display
• Compatible with all GST intelligent fire alarm controllers
• Two part plug-in construction with base mounted termination allows easy
installation and connection
• Repeater can be plugged in to base at time of commissioning
Fireman's Control Panel
GST14FCP
• Integrated Firemans’ control panels
• Automatic and manual control
• CPU control
• Hinged switch covers to stop accidental operation
• Compatible with all fire control panels
12
Part Number
Conventional Fire Alarm Panels
GST102/104/108
• 2/4/8 zone conventional fire alarm panels.
• Both End of Line Resister and Active End of Line can be used.
• Day/night mode selected
• Key-control evacuate
• Repeater is available for GST108
• Fire alarm output for remote alarm
• Class Change terminal for remote control
Technical Specifications
•
Power supply:AC220V 50/60Hz
•
Operating Environment:
Temperature: -10°C~+ 40°C
Relative Humidity: ≤95%
•
Dimension: 380mmx320mmx95mm
•
15 fire detectors and infinite manual buttons each zone
Active End Of Line
• Active End Of Line for conventional fire detection loop.
• It can be used as conventional detector base or work independent with a
cover
13
P-9907
Part Number
Power Supply Unit
PSU24-3
• 3amp 24 volt DC Intelligent PSU
• Display shows AC input Voltage, DC output Voltage
• Fully monitored with self test facilities
• Addressable intelligence enabling full monitoring and reporting to Fire
Control panel(PSU24-3A)
• Requires 2x 12volt battery for standby power
Technical Specifications
•
Power supply:AC220V 50/60Hz
•
Operating Environment:
Temperature: -10°C~+ 40°C
Relative Humidity: ≤95%
•
Dimension: 310mmX400mmX115mm
Intelligent Boxed PSU
PSU24-6
• 6amp 24 volt DC Intelligent PSU
• Display shows AC input Voltage, DC output Voltage,DC Load (amps)
• Fully monitored with self test facilities
• Only requires 2x12volt battery for standby power
Technical Specifications
•
Power supply:AC220V 50/60Hz
•
Operating Environment:
Temperature: -10°C~+ 40°C
Relative Humidity: ≤95%
•
Dimension: 500mmX440mmX170mm
14
Part Number
Intelligent Network Boxed PSU
PSU24-6A
• All the Facilities of PSU24-6 with the added facility of addressable control
enabling full monitoring and reporting
• Addressable control enables remote reset facilties (enabling non-intelligent
ancillary DC powered equipment that requires the removal of power to be
reset)
Technical Specifications
•
Power supply:AC220V 50/60Hz
•
Operating Environment:
Temperature: -10°C~+ 40°C
Relative Humidity: ≤95%
Intelligent Power Panel PSU
• 19” Rack Mountable 2u PSU
• 6amp 24volt DC Intelligent PSU
• Display shows AC input voltage, DC output voltage, DC Load (amps)
• Fully monitored with self test facilities
• Only requires 2x12volt battery for standby power
15
PSU24-6RM
Part Number
Extinguishing Cylinder Control Panel
GST302/304/306
• Capable of controlling upto 6 zone of extinguishing
• Direct Intelligent control Via addressable Loop
• Auto and manual control Facilities
• Fully monitored status control
Addressable Gas Extinguishing Warning
Indicator
I-9318
• Normally located above the entrance to the gas extinguishing protected area
• Eliminate prior to gas release
• Electronically addressed
Emergency Remote Control
I-9317
• Emergency Abort / activate gas release buttons
16
Intelligent Fire Alarm System
17
Intelligent Fire Alarm System Connection
18
Conventional Fire Alarm System
19
Conventional Fire Alarm System Connection
1. Using End Of Line Resister.
NOTE In compliance with EN/BS standards, when using EOL Resister, call points should be wired before detectors, so that the removal of any
detector will not inhibit call points from operating.
C-9201 Conventional
Manual Call Point
C-9101 Conventional
Optical / Heat Detector
C-9102 Conventional
Optical Detectors
C-9103 Conventional
Heat Detectors
2. Using Active Of Line:
AEOL enables call points to be installed in any location on zone (circuit), as will not be affected by removal of detector (Diode base DZ-03D)
is required for detectors).
Please pay attention to the polarisation.
With Detector
C-9101 Conventional
Optical / Heat Detector
C-9102 Conventional
Optical Detectors
C-9103 Conventional
Heat Detectors
C-9201 Conventional
Manual Call Point
P-9907 Active End of Line
Without Detector
C-9101 Conventional
Optical / Heat Detector
C-9102 Conventional
Optical Detector
C-9103 Conventional
Heat Detector
C-9201 Conventional
Manual Call Point
P-9907 Active End of Line
20
GST is widely accepted as a World Leader in the
development and manufacture of Integrated Fire
Detection and Building Automation Systems.With the
complete range of products GST has a solution to suit
your requirements, from a small system up to large fully
integrated solution.
This catalogue provides an overview of our range of fire
detection products, other products manufactured by
GST not covered in this publication include:
Intelligent Voice Alarm (VA)
EX Intrinsically Safe Fire Detectors and Barriers
Intelligent Integrated Building Management Systems.
Intelligent Hotel and Guest Room Control Systems.
Intelligent Residential Control Systems .
Intelligent Power Metering.
Smart Card Controlled Power Metering.
Intelligent Access Control.
For further information and enquiries about the GST
range of equipment please contact your Regional GST
approved systems partner as detailed on the rear cover
of this publication, or via our Website www.gstplc.com
E-mail:info@gstplc.com
Global System Technology PLC
GST UNITED KINGDOM
Victoria House
28-38 Desborough Street
High Wycombe Bucks HP11 2NF
United Kingdom
Tel: +44 (0)1494 601107
Fax: +44 (0)1494 601108
60 Westcliffe Road
Ruskington,
Sleaford
NG34 9AY
Tel: 01526 833999
Fax: 01526 833011
GST DUBAI
Unit ZA04 Jebel Ali Free Zone
P O Box 17998 Dubai UAE
Tel: +971 (0)4 88 33 050
Fax: +971 (0)4 88 33 053
GST TURKEY
Kordonboyu Mahhallesi
Ankara Cadessi
No. 148/2
Kartal, Istanbul, Turkey
Tel: +90 216 353 7344
Fax: +90 216 353 7345
GST EGYPT
53m Yussef Abbs. St, App.63 EL Tawfiek Building
Nasr City Cairo Egypt
Tel: +202 4030381
Fax: +202 4047949
DISTRIBUTOR
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising