IGS - Elfa
GDS-3000 Series VO
Visual Persistence Oscilloscope
350MHz/250MHz/150MHz Digital Storage Oscilloscope
(3 Year WARRANTY)
FEATURES
* 350/250/150MHz Bandwidth, 2/4 Input Channel
5GSa/s Real-time Sampling Rate and 100GSa/s Equivalent
Time Sampling Rate
25k Points Memory for Each Input Channel
VPO (Visual Persistence Oscilloscope) Technology to Display
Less-Frequently-Occurred Signals
8” 800 x 600 High Resolution TFT LCD Display
Unique Split Screen System with Independent Setting and
Display for Each Input Channel
e Three Built-in Input Impedance Selections: 502/752 JTM£2
Optional Power Analysis Software for Power Source
Measurement and Analysis
Optional Serial bus Analysis Software for Trigger & Decode of С INSTEK
|* C, SPI and UART Interfaces
Made to Measure Since 1975
350/250/150 MHz Digital Storage Oscilloscope
GDS-3000 Series
EA = 08
The GDS-3000 Series digital storage oscilloscope is a full-featured and powerful tool that allows you to tackle complex
measurement issues with ease.
The GDS-3000 Series, carrying a maximum bandwidth of 350MHz, is equipped with a real-time sampling rate up to
5GSa/s and an equivalent-time sampling rate of 100GSa/s. The large 8-inch SVGA LCD screen, combined with the
advanced digital signal processing technology VPO, provides meticulous detail and clarity for the displayed waveforms.
The GDS-3000 Series gives you confidence not to miss any part of the test signal in the product verification and
debugging stages and allows you to speed up your task without hesitation.
5GSa/s Sampling €: VPO Technology
The GDS-3000 Series adopts VPO (Visual Persistence Oscilloscope) signal processing technology to enhance the
performance of multi-gray-scale waveform display. The FPGA parallel processing, instead of conventional microprocessor
architecture, is applied in GDS-3000 Series design to significantly increase the data processing speed and therefore
increase the waveform update rate. This technology allows the GDS-3000 Series to display waveforms with various gray
scales based on the occurrence frequencies, a fashion analogous to the analog oscilloscope display. As the visual
persistence oscilloscope contains 3-dimension waveform data, including amplitude, time and intensity, for each
waveform spot, it provides more useful signal information than a normal digital storage oscilloscope can do. The high-
speed data processing of VPO technology enables the signal analysis of rapid events such as video, jitter, glitch and runt.
The GDS-3000 Series features a maximum real-time sampling rate of 5GSafs, which is superior to most of the equivalent
oscilloscopes available in the market today. (2.5GSa/s maximum sampling rate for GDS-3152 & GDS-3252). The series is
also equipped with an equivalent- time sampling rate of 100 GSa/s, providing an economic solution for the waveform
acquisition and reconstruction of very high-speed repetitive signals. The fast-acquisition capability along with VPO signal
processing technology, make GDS-3000 a very handy tool for observing occasionally-occurred signals such as transient
and inrush events. With powerful technology, GDS-3000 Series gives you full confidence in every acquisition of complex
waveform that adheres to high-speed circuit design of modern products.
GDS-3000 Series ML
VPO Visual Persistence Oscilloscope Signal Processing Technology
Gray Mode Color Mode
The GDS-3000 Series equipped with VPO signal processing technology and 5GSa/s
high-speed real-time sampling rate, allows you to view the video signal clearly.
A Hi-tech DSO Platform
The GDS-3000 Series is a new platform of 4-input channels, 350MHz bandwidth, 5GSa/s sampling rate, and VPO
waveform display. The split screen feature has been designed to meet the requirements of multi-window & multi-signal
tests in the research and the manufacturing fields. The optional power analysis software and the optional serial bus
analysis software are available to facilitate the engineer's tasks in testing and manufacturing of the associated products.
Three new differential probes, GDP-025, GDP-050 & GDP-100, and two new current probes, GCP-530 & GCP-1030, are
coming along with the GDS-3000 Series to provide total solutions for a wide variety of applications in the industry,
service and education market sectors. The GDS-3000 Series, a high-tech platform carrying thoughtful features, brings
very high customer value to both general purpose market and professional market.
Serial Bus Analysis Software and Power Quality Analysis Software
With widespread applications of embedded system adopting serial bus communication standards, resolving unexpected
issues, such as propagation delay and bus contention, is often a challenge to design and testing engineers. The GDS-
3000 Series provides (optional) design and testing engineers with powerful tools for the communication analysis and
debugging of most the popular serial interface projects including 1* C ,SPI and UART.
To fulfill the increasing power measurement demands, as a green energy trend, GDS-3000 provides an embedded power
analysis software (optional), which includes measurements of Power Quality, Harmonics, Ripple and Inrush Current,
meeting requirements of most power measurement standards.
to Measure. | Good Will Instrument Co., Ltd.
350/250/150 MHz Digital Storage Oscilloscope
1. 8"TFT LCD Panel
The bright 8" TFT LCD display makes multiple signal
observation easy.
2. 5GSa/s Real-time Sampling Rate for Fast Waveform Capture
The high speed sampling technology used for data acquisition
truthfully reconstructs complex signals.
3. NFL Signal Processing Technology
VPO signal processing technology displays waveforms in
3 dimensions - amplitude, time and intensity.
4. Compact Design
With a depth of only 5 inches, the compact size of the product
doesn't occupy valuable work space.
5. Split Window Function (Split Screen)
The GDS-3000 Series supports up to four independently
operated and triggered windows at a time so that you can
simultaneously monitor up to 4 signals carrying different
characteristics.
6. Auto-Range Function
The Auto Range function automatically adjusts the time base
and/or the vertical scale of displayed waveform when the
frequency and/or the amplitude of input signal changed.
7. High Speed USB 2.0 Port
USB Host port for easy access of stored data.
8. Three Input Impedance Selections
The three built-in input impedances (7502, 5002 ,1MQ) can be
selected to meet the requirements of various applications.
9. Serial Bus Triggering and Decode ( Optional )
2 dedicated keys used for setting recall in the serial bus analysis
applications supporting UART, 1? C and SPI serial bus.
10. Independent Channel Design
The independent zone of vertical operations for each channel
substantially increases the measurement efficiency.
A High-tech Platform Carryi
LL
4 Channel Model
SELECTION
Model GDS-3354
Bandwidth 350MHz
Channels 4
Record Length | 25k/Channel
Real-Time
Sampling 5 GS/s
Equivalent-
Time Sampling | 100GSa/s
GDS-3352
350MHz
2
25k/Channel
5 GSajs
100GSa/s
GD:
251
25k/
5 ¢
100
* 2 Channels on Max Sampling Rate: 2.5GSa/s (GDS-3354)
# 3, 4 Channels on Max Sampling Rate: 1.25GSa/s (GDS-33
GDS-3000 Series UT
ing Advanced Technologies
IGSa/s
GDS-3252
250MHz
2
25k/Channel
2.5 GSa/s
100GSa/s
GDS-3154
150MHz
4
25k/Channel
5 GSajs
100GSa/s
GDS-3152
150MHz
2
25k/Channel
2.5 GSa/s
100GSa/s
| 352/3254/3154); 1.25GSa/s (GDS-3252/3152)
54/3254/3154)
11. USB Ports as Standard
USB Host/Device interfaces for easy access of stored data and
direct print-out through a PictBridge compatible printer.
12. LAN Port as Standard
LAN interfaces for remote control and monitoring.
13. Line Output
3.5mm stereo sound output for Go/NoGo buzzer.
14. RS-232 Interface
15. SVGA Video Output
SVGA video output port allows the transfer of DSO screen
image to an external projector or monitor for remote
monitoring or big screen observation.
16. Go/NoGo BNC
The open collector output signal allows external instrument
to be controlled by the test result.
17. Trigger Output Port
À 5V TTL Level trigger signal is available for the synchronization
with other devices.
18. Self-Calibration Signal Output
Self-Calibration signal output for input channel vertical gain
calibration.
Multi-Language Support
English
[BAT Re]
Te
Polska
Eramrals
The GDS-3000 Series interface supports multiple languages
to provide the upmost convenience for cross-country team
cooperation and multinational engineering efforts.
Made to Measure, | Good Will Instrument Co., Ltd.
350/250/150 MHz Digital Storage Oscilloscope
re UNIQUE SPLIT SCREEN FUNCTION
The unique split screen feature of GDS-3000 Series allows each input
channel to be operated independently with respective setting and waveform
display. The time base, the vertical sensitivity and the trigger selections can
be done by each channel separately, and the waveform of each input signal
can be shown on the individual part of the screen. This nearly four-DSO-in-
one feature* is very useful for the applications that need to simultaneously
see the details of multiple waveforms with very different characteristics. The
8-inch high resolution 800x600 LCD display makes the split screen a
pleasant observation environment to view the details of complex signals.
C AUTO RANGE for both TIME BASE and VERTICAL SCALE
B. COMPLETE SET of TRIGGER FUNCTIONS
Besides Edge trigger, the GD5-3000 Series also offers various trigger
functions, including Video, Pulse Width, Runt, Rise Time & Fall Time
(specific time length), Alternate, Delay by Time, Delay by Event, and Hold-
Off. The high sampling rate, the VPO signal processing & display, and the
flexible trigger function all together make the GDS-3000 Series a powerful
tool for waveform capture and display of various types of signals.
D. DUAL DISPLAY WINDOW ZOOM
The Auto Range function automatically adjusts the time base and/or the
vertical scale of displayed waveform when the frequency and/or the
amplitude of input signal changed. This function gives user the convenience
to have DSO always display waveform in a proper fashion on the screen
tracking the frequency and amplitude changes of the input signal. It is
especially useful when the user needs to alternately probe and test multiple
circuit points containing signals with different frequencies and amplitudes.
= 25 AUTOMATIC MEASUREMENTS
The GDS-3000 Series Window Zoom function provides dual display mode
to show the main waveform and the magnified section of zoomed-in
waveform at the same time. Under "Zoom" mode, the width and the
position of zoom-in window over the main waveform can be selected to
get the magnified waveform as needed for detailed observation. To quickly
and accurately move the zoom-in window to the expected position, the
"Coarse" mode helps move the window to the needed position
immediately and the "Fine" mode provides fine adjustment to precisely
place the window in the exact position.
F. FFT TEST FUNCTION
The GDS-3000 Series supports simultaneous measurement of up to 28
waveform measurement items grouped into three main waveform
parameters: amplitude, time and delay measurements. The display modes
include an individual mode and a Display All mode. The former can
display any 8 of the automatic measurements while the later can display
all the automatic measurements for a channel.
To observe fundamental and harmonic frequency components of a signal,
the FFT function on a digital storage oscilloscope is often used. Typically
the traditional unit of the FFT is decibel (dB). However, when using dB it
is sometimes difficult to identify the fundamental frequency of a signal
from a noisy spectrum. With FFTrms function, the GDS-3000 Series can
clearly display the fundamental frequency of an acquired waveform.
The FFT function of GDS-3000 supports Rectangular, Hamming, Hanning,
and Black-harris windows.
GDS-3000 Series = Za
G THREE INPUT IMPEDANCE SELECTIONS H. X-Y MODE
Impedance |
ME? 7522 50€
E Mare fes 1)
Three input impedance, 1M0, 750, and 500 are available for user's The X-Y mode of GDS-3000 defines CH1 and CH3 as the horizontal axis
selection. The flexibility of impedance selections, including 1M to get and CH2 and CH4 as the vertical axis, allowing the display of 2 sets of
X-Y pattern simultaneously. The measurement items include Rectangular,
Polar, Product and Ratio that fits most of the popular X-Y applications.
The X-Y pattern and the time domain waveforms can be shown on the
GD5-3000 Series utilization range. screen simultaneously. Two cursors on the time domain waveforms allow
the identification of cursor-associated locations on the X-Y pattern display.
В EXTENDABLE APPLICATION SOFTWARE E WAVEFORM FILE PREVIEW
minimum loading effect, 750) to accommodate Video transmission
applications and 500 to fit RF communication applications, extends the
The GDS-3000 Series allows future installation of additional application The GD5-3000 provides an optimized operation interface for viewing
software at the user site. This provides an open environment for screen captures, Generally, the oscilloscope may store large amounts
optional software upgrade and additional feature built-in in whenever of waveform data after a long period of time. To help prevent engineers
: ru from selecting the wrong file from a large number of stored waveform
the GDS-3000 Series user has the need. The flexibility of software files, the screen capture preview function can be used to preview the
installation platform keeps the DSO being in use always up-to-date. waveform file without opening files so that operation of the oscilloscope
is more efficient and convenient.
Ls SVGA OUTPUT
K. FREE REMOTE CONTROL SOFTWARE
Using a USB port coupled with FreeWave remote monitoring software À SVGA video output port in the rear panel of GD5-3000 Series allows
3000 Series. With FreeWave, a screenshot can be saved as an image file en : : E Ч
(-bmp/.jpg), waveform data (.csv) can be logged and movie files(.wmv) for remata Monitora Screen cosarvation. Tnis disc image
can be recorded in real-time. Not only can FreeWave monitor and record transfer feature greatly increase the efficiency of presentation in the
waveforms over a long period of time, but previously recorded meeting, teaching in the class, remote monitoring of hazardous events
waveforms can also be observed. Instrument settings can even be from a secured zone, and fast and easy monitoring in the prod uction line.
configured without the need to learn incomprehensible command line
syntax. With the simple user interface and robust features, FreeWave
allows you to get the most out of the GDS-3000 with little effort. Made to Measure. | Good Will Instrument Co, Ltd. E
350/250/150 MHz Digital Storage Oscilloscope
LR VARIOUS INTERFACES SUPPORT
Two high-speed USB 2.0 Host ports located in both front panel and rear
panel are used for easy access of stored data. In the rear panel, a USB
Device port is available for remote control and hardcopy print-out through
a PictBridge compatible printer. RS-232 and LAN interfaces are provided
as standard for system communication & ATE applications.
A SVGA video output port allows the transfer of DSO screen image to
an external projector or monitor for remote monitoring or big screen
observation. A GPIB to USB adaptor is available as an option for
interface conversion though the USB Device port in the front panel.
JE SERIAL BUS ANALYSIS SOFTWARE SUPPORTING 1* C,SPI and UART (OPTIONAL)
Serial Bus Analysis Software
With serial bus technology being widely used in embedded applications,
the proper triggering and analysis of flowing data, control signal and
associated pulse waveforms in serial bus communication has been a
difficult job and challenge to design engineers. The Serial Bus Analysis
software of GDS-3000 Series carries complete analysis tools for triggering
and decoding of commonly used serial bus interfaces, including 12 C, SPI
The GDS-3000 Series provides two dedicated keys
in the front panel for tow sets of setting recall
and UART. Without spending time to study serial bus regulation details,
the user only needs to set the trigger condition on GD5-3000 to get the
data slots of interest.
* Only four-channel models support SPI function.
O. POWER ANALYSIS SOFTWARE FOR POWER SUPPLY MEASUREMENTS (OPTIONAL)
Power Quality Harmonics
The Power Analysis software contains four measurement functions,
including Power Quality, Harmonics, Ripple and Inrush Current. The
Power Quality analysis function allows the measurements of Voltage,
Current, Frequency, Power and other quality related parameters for power
source efficiency improvement. The Harmonics analysis function
performs evaluation of power waveform distortion and gives harmonic
In-rush Current
test data for power source design and quality check. This function is
complied with IEC 61000-3-2 standard. The Ripple measurement
function, acquiring the ripple and noise overriding the DC waveform,
is used to evaluate the DC power source quality. The Inrush Current
measurement function is used to measure the power-on surge current,
which may cause the damage of the device circuit.
GCP-530/1030
VOD
Visual Persistance Oscilloscope
GDS-3000 Series
Current Probe and Differential Probe Selections
GCP-206P/425P
153 TES,
GDP-025 GDP-050/100
Besides the included accessory of passive probes, the optional differential probes and current probes are also available with the GDS-3000 Series for
user's selection. Three new differential probes, GDP-025, GDP-050 & GDP-100, and two new current probes, GCP-530 & GCP-1030, are coming along
with GDS-3000 to provide total solutions for a wide variety of applications in the industry, service and education market sectors.
* Current probe power supply is needed for both GCP-530 and GCP-1030 current probe.
CURRENT PROBE CURRENT PROBE POWERSUPPLY
GCP-530 GCP-1030 GCP -206P GCP-425P
Probe Bandwidth DC ~ 50MHz DC ~ 100MHz Compatible Current Probe GCP-530 GCP-530
Rise Time Tns or less 3.5ns or less GCP-1030 GCP-1030
Maximum Continuous Input Range | 30Arms 30Arms Number of Power Supply Connectors | 2 4
Maximum Peak Current Value | 50Arms 50Arms Output Voltage +12V+0.5V +12V+0.5V
Output Voltage Rate O.1V/A O.1V/A ¿600mA 22 SA
Rated O Current .
Amplitude Accuracy H1.09érdgtimV #1.09érdgt1mv ps de
(0-30Ams/DE, 45 (0-30Arms/DC, ind Supply Voltage 100V ACHIO% 100V-—240V АС+1 0%
~66Hz) ; 42.0%rdg | 45-66Hz) : +2.0%rdg Li als
(30Arms-50A peak/ | (30Arms-SOA peak/ Maximum Rated Power 20VA 170VA
ia. DC, 45-66H2)
Nal SE Te тя пас Dimensions 73(W)x110(H)x | SO(W)x119(H)x
== mes TA Weight 186(D)mm ; 200(D) mm ;
PF 8 EEE S12VEQSV Approx.1.1kg Approx.1.1kg
Maximum Rated Power 3.6VA 5.3VA
Maximum Rated Voltage 300V ,CAT | 300V (CAT | Accessories Power cord, fuse | Power cord, fuse
HIGH-VOLTAGE DIFFERENTIAL PROBE
Probe Bandwidth
Attenuation
Accuracy
Voltage Input Range (DC+AC peak to peak)
Permitted Max Input Voltage
Input Impedance
Output impedance
Rise Time
Rejection Rate on Common Mode
(CMRR)
Power Supply
Consumption
GDP-025
DC — 25MHz(attenuationx50, x200) ;
DC — 15MHz(attenuationx20)
X20 , ¥50 , x200
+29
<140Vp-p for x 20,
<350Vp-p for x 50,
<1400Vp-p for x 200
Maximum differential voltage:
Max voltage between input terminal
and ground: 600Yrms
Differential:4M C) /1.2pF ;
Between terminals and ground: 2MO /23pF
=7.0v
500
14ns (x50, x200 attenuation) ;
23.4ns (x20 attenuation)
60H z=80dB , 100Hz=60dB,
1MHz>50dB
External DC adapter
Maximum 35MA(0.4Watt)
GDP-100
DC — 100MHz(attenuation200, x500 , x1000) ;
DC - SOMHz(attenuationx1 00)
X100 , x200 , «500 , x1000
GDP-050
DC ~ 50MHz(attenuationx200, x500, x1000) ;
DC- 25MHz(attenuationx100)
X100 , x200 , x500 , x TODO
12% 12%
£ T00Vp-p for x 100 = 700Vp-p for x 100
< 1400Vp-p for x 200 < 1400Vp-p for x 200
= 3500Vp-p for x 500 = 3500Vp-p for x 500
= 7000Vp-p for x 1000 < 7000Vp-p for x 1000
Maximum differential voltage: Maximum differential voltage:
Max voltage between input terminal and UA NET wd
ground: 6500Vrms ground: 6500Vrms
Differential: 54M © /1.2pF :
Between terminals and ground: 27M © /2.3pF
Differential: 54M Q 1.2pF ;
Between terminals and ground:27MQ [2.3pF
=7.0V =7.0v
5007 5007
ns (x2000, x500, x1000 attenuation) ; 3.5ns (x2000, x500, x1000 attenuation) ;
14ns (x100 attenuation) ns (x100 attenuation)
60Hz>80d8 , 100Hz>60d8, é0Hz>80d8 , 100Hz>60dB,
TMHz=50dB 1MHz=50d8
External DC adapter External DC adapter
Maximum 35mA(0.4Watt) Maximum 35mA (0.4Watt)
Made to Measure. | Good Will Instrument Co., Ltd.
350/250/150 MHz Digital Storage Oscilloscope
SPECIFICATIONS
GDS-3152 GDS-3154 GDS-3252 GDS-3254 | GDS-3352 GDS-3354
VERTICAL
Channels 2Ch+EXT 4Ch+EXT 2Ch+EXT 4Ch+EXT 2Ch+EXT 4Ch+EXT
Bandwidth DC-150MHz(-3dB) | DC-150MHz(-3dB)| DC-250MHz(-3dB) | DC-250MHz(-3dB) | DC-350MHz(-3dB) | DC-350MHz(-3dB)
Rise Time 2.3ns 2.3ns 1.4ns 1.4ns Ins Ins
Bandwidth Limit 20MHz 20MHZ 20M/100MHz 20M/100MHZz | 20M/100M/200MHz 20M /100M/200MHz
The bandwidth of the 75Q input impedance is limited to 150MHz only
Vertical Resolution 8 bits
Vertical Resolution 2mV-5V/div
MO)
Vertical Resolution 2mY—1v/div
(50/750)
Input Coupling AC, DC, GND
Input Impedance 1M£2// 15pF approx.
DC Gain Accuracy +(3% X |Readout| + 0.1div + 1mV)
Polarity Normal , Invert
Maximum Input 300V (DC+AC Peak), CAT |
Voltage(1M 0)
Maximum Input 5 Vrms , CAT
Voltage(50/750)
Offset Position Range | 2mV/div — 100mV/div : $0.5V ; 200mV/div — SV/div : +25V
Waveform Signal Add, Subtract, Multiply, and Divide waveforms, FFT, FFTrms ; FFT : Spectral magnitude. Set FFT vertical scale to
Process Linear RMS or dBV RMS, and FFT window to Rectangular, Hamming, Hanning or Blackman-Harris.
TRIGGER
Source 2CH model: CH1, CHZ, Line , EXT ; 4CH model: CH1 , CH2 , CH3 , CH4 , Line , EXT
Trigger Mode Auto (Supports Roll Mode for 100 ms/div and slower), Normal, Single
Trigger Type Edge, Pulse Width, Video, Runt, Rise £: Fall, Alternate, Event-Delay(1-65,535 events), Time-Delay(10ns-10s),
12C, SPI, UART (optional)
Trigger Holdoff Range | 10ns ~ 10s
Coupling AC, DC, LF rej. , Hf rej. , Noise rej.
Sensitivity DC-30MHz Approx. 1div or 10mV; 50MHz~150MHz Approx. 1.5div ог 15mV; 150MHz~-350MHz Approx. 2div or 20mV
EXT TRIGGER
Range *15v
Sensitivity DC ~ 150MHz Approx. 100mV
150MHz ~ 250MHz Approx. 150mV;250MHz ~ 350MHz Approx. 150mV
Input Impedance 1M£) £3%, -16pF
HORIZONTAL
Range 1ns/div — 100s/div (1-2-5 increments); ROLL : 100ms/div — 100s/div
Pre-tri 10 div maximum
1,000 div max ( depend on time base )
Accuracy * 20 ppm over any > 1 ms time interval
X-Y MODE
X-Axis Input/Y-Axis Input | Channel 1; Channel 3/Channel 2; Channel 4
Phase Shift + 3'at 100kHz
SIGNAL ACQUISITION
Real Time Sample Rate 25GSa/s | sGSa/s | 25GSafs | 5GSa/s | SGSa/s | SGSa/s
ET Sample Rate 100GSa/s maximum for all models
Record Length 25k points
Acquisition Mode Normal, Average, Peak detect, High resolution, Single
Average: 2 ~ 256 waveforms ; Peak detect: 2ns
CURSORS AND MEASUREMENT
Cursors Amplitude, Time, Gating available
Automatic 28 sets: Vpp , Vamp, VE. Vers , Vhi, Vio, Vmax , Vmin , Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot,
Measurement Freq , Period , Rise time , Fall time , Positive width , Negative width , Duty cycle, Phase, and eight di nt delay
Cursors measurement
Auto counter
measurements (FRR, FRF, FFR, FFF, LRR, LRF,LFR, LF
Voltage difference between cursors (AV) Time difference between cursors (AT)
6 digits, range from 2Hz minimum to the rated bandwidth
POWER MEASUREMENTS(OPTION)
Power Quality VRMS, VCrest factor, Frequency, IRMS, ¡Crest factor, Truepower, Apparent power, Reactive power, Power factor, Phase angle.
Measurements
Harmonics Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
Ripple Measurements | Vripple Jripple
In-rush current First peak, second peak
CONTROL PANEL FUNCTION
Autoset Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset
Auto-Range Allow automatically adjusts the time base and/or the vertical scale of displayed waveform when the frequency and/or the amplitude of
input signal changed.
Save Setup 20set
Save Waveform 24set
GDS-3000 Series
VD
Visual Parsistenco Osciicanopo
SPECIFICATIONS
GDS-3152 GDS-3154 | GDS-3252 | GDS-3254 GDS-3352 GDS-3354
DISPLAY SYSTEM
TFT LCD 8" TFT LCD SVGA color display (LED Back-light)
Display Resolution 800 horizontal x 600 vertical pixels (SVGA)
Interpolation Sin(x)/x & Equivalent time sampling
Waveform Display Dots, Vectors, Variable persistence, Infinite persistence
Display Graticule 8 x 10 divisions
Display Brightness Adjustable
INTERFACE
RS-232C DB-9 male connector
USE Port 2 sets USB 2.0 high-speed host port ;1 set USB high-speed 2.0 device port
Ethernet Port R)-45 connector, 10/100Mbps
SVGA Video Port DB-15 female connector, monitor output for display on SVGA monitors
GPIB GPIB-to-USB Adapter (Optional)
Go/NoGo BNC 5V Max/10mA TTL open collector output
internal Flash Disk 64MB
Kensington Style Lock Rear-panel security slot connects to standard Kensington-style lock
Line Output 3.5mm stereo jack for Go/NoGo audio alarm
POWER SOURCE
Line Voltage Range | AC 100V ~ 240V, 48Hz ~ 63Hz, auto selection
MISCELLANEOUS
Multi-Language Menu | Available
On-Line Help Available
Time clock Time and date, provide the date/time for saved data
DIMENSIONS & WEIGHT
400(W) X 200(H) X 130(D)mm, Approx. 4 kg
* Three-year warranty, exduding probes & LCD display panel.
Specifications subject to change without notice.
ORDERING INFORMATION
GDS-3352 350MHz, 2-Channel, Visual Persistence DSO
GDS-3354 350MHz, 4-Channel, Visual Persistence DSO
GDS-3252 250MHz, 2-Channel, Visual Persistence DSO
GDS-3254 250MHz, 4-Channel, Visual Persistence DSO
GDS-3152 150MHz, 2-Channel, Visual Persistence DSO
GDS-3154 150MHz, 4-Channel, Visual Persistence DSO
Accessories
User manual x1 , Power cord x1
GTP-151R : 150MHz 10:1 passive probe for GDS5-3152/3154 (one per channel)
GTP-251R : 250MHz 10:1 passive probe for GDS-3252/3254 (one per channel)
GTP-351R: 350MHz 10:1 passive probe for GDS-3352/3354 (one per channel)
Option
DS3-PWR Power analysis software: Power quality/Harmonic/Ripple/In-rush current measurements
DS3-SBD Serial Bus analysis software: 12C/SPI/UART (only 4-channel models support SPI function)
GUG-001 GPIB to USB adapter
Optional Accessories
GTP-033A 35MHz 1:1 Passive Probe
GDP-025 25MHz High voltage differential probe
GDP-050 5OMHZz High voltage differential probe
GDP-100 100MHz High voltage differential probe
GCP-530 50MHz/30A Current probe
GCP-1030 100MHz/30A Current probe
GCP-206P Power supply for current probe (2 input channel)
GCP-425P Power supply for current probe (4 input channel)
GTC-001 Instrument cart 450(W) x 430 (D)mm (120V input socket)
GTC-002 Instrument cart 330(W) x 430(D)mm (120V input scoket)
GSC-008 Soft Carrying Case
GTL-110 Test lead, BNC to BNC connector
GTL-232 RS-232C cable, 9-pin female to 9-pin female, Null Modem for computer
GTL-246 USB 2.0 cable, A-B type cable 4P, 1800mm
Free Download
PC Software FreeWawe software Driver USB driver ; LabView driver
Made to Measure | Good Will Instrument Co., Ltd.
DISTRIBUTOR :
Global Headquarters
GOOD WILL INSTRUMENT CO., LTD.
Ho, 7-1, |hongsing Road, Tucheng City, Taipel County 236, Taiwan
T +886-2-2268-0389 F +E86-2-2268-0635
E-mail: marketing @ goodwill.com, tw
China Subsidiary
GOOD WILL INSTRUMENT (SUHZOU) CO., LTD.
МО. 69, Lushan Road, Snd, Suzhou Jiangsu 215017 China
T +56:512:6661:7177 F +B5-5312-5661-F277
E-mail: marketing@®instek.com.cn
Malaysia Subsidiary
GOOD WILL INSTRUMENT (M) SDN. BHD.
27, Persiaran Mahsuri 1/1, Sumway Tunas,
11900 Bayan Lepas, Penang, Malaysia
T +604-6309988 F +604-6309989
E-mail: sales gocdwill.com.my
DS-3000GD2BH
.5.A, Subsidiary
INSTEK AMERICA CORP.
3661 Walnut Avenue Chins, CA 51710, USA,
T +1-909-5918358 F =1-909-5912280
E-mail; sales@instekamerica.com
Japan Subsidiary
INSTEK JAPAN CORPORATION
4F, Prosper Bldg, 1-3-3 lwarmoto-Cho Chiyoda-Ku,
Tokyo 101-0032 Japan
T +81-3-5823-5656 F +81-3-5823-5655
E-mail: info@@instek.co.jp
Korea Subsidiary
GOOD WILL INSTRUMENT KOREA CO., LTD.
Room No.305, Ace Hightech-City BID 1 Cong,
Mullae-Dong 3Ga 55-20, Yeongduengpo-Gu, Seoul, Korea
T +#2-2-3439-2205 F +82-2-3439-2207
E-mail : gwinstek@{gwinstek.co.kr
GWINSTEK
Made to Measure Since 1975
www.gwinstek.com
e Simply Reliable
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising