R Specifications Model ROPS / CAB Engine

R Specifications Model ROPS / CAB Engine
 Specifications
Model
ROPS / CAB
Engine
Type (Make : KUBOTA)
No. of cylinders/Aspiration
Engine net power
PTO power
Total displacement
Engine rpm
Fuel tank capacity
Alternator
Transmission
No. of speeds
Main gear shift
Dual speed (Hi-Lo)
Shuttle shift
Main clutch type
Main clutch material / diameter
Brake type
Differential lock (Front / Rear)
4WD clutch type
PTO
Type
Speed
Hydraulics
Pump capacity (3-Point Hitch)
3-Point Hitch
Category
Control system
Lift capacity at 24 in. behind lift point
Cylinder type
No. of standard remote valves
Other features
4WD system
Steering
Tilt steering
Hood type / Pedal type
Deck type (ISO-mounted w/rubber mat)
Panel type
Fender shape
Standard tire size
2WD Front/Rear
4WD Front/Rear
Dimensions & weight
Overall length ROPS models
CAB models
Overall height top of ROPS
top of CAB
Overall width (minimum)
Wheelbase ROPS models
CAB models
Crop clearance (Front axle)
Tread width Front
Rear
Turning radius (w/o brake)
Tractor weight ROPS models
CAB models
M40Series
M5140 M6040
2WD 4WD 2WD 4WD
F-1/FC DT/DTC HD / HDC F-1/FC1 DT-1/DTC-1 HD-1/HDC-1
V2403-DI-T V3307-DI-T
E-TVCS, Indirect Injection E-CDIS, Direct Injection
4 / Turbocharged
HP(kW) 52 (38.8) 63.5 (47.3)
HP(kW) 46 (34.7) 56 (41.7)
cu.in. (cc) 148.5 (2434) 203 (3331)
2600
gal. (¢) 18.5 (70) on ROPS model, 23.8 (90) on CAB models
45Amp on ROPS model, 60Amp on CAB model, (80Apm N/A) 45Amp on ROPS model, 60Amp on CAB model, 80Apm: OPT
F8 / R8 (creep option N/A) F8/R8
Fully synchronized (4 speed)
N/A
Synchro-shuttle Hydraulic-shuttle Synchro-shuttle Hydraulic-shuttle
Dry single plate Multiple wet disc Dry single plate Multiple wet disc
in. (mm) Organic / 10.8 (275) Cerametallic / 10.8 (275)
- / Mechanical
Mechanical
Live-independent, hydraulic PTO with PTO brake, wet clutch
rem 540
gpm ({/min.) 11.0 (41.6)
Telescopic lower link ends, telescopic stabilizers
1/1
Position, draft (option) Position, draft (top link sensing) & mixed control
Ibs. (kg) 3307 (1500)
Two external cylinders
1 (2nd, 3rd optional)
- Bevel gear type - Bevel gear type
Hydrostatic power steering
Standard
Full open, slanted, steel / Hanging
Semi-flat on ROPS models, full-flat on CAB models
Electronic
Wide, round
6.50-16 F2 9.5-24 R1 7.50-16 F2 9.5-24 R1
14.9-28 R1 16.9-28 R1
in. (mm) 140.4 (3565) 135.6 (3445) 140.4 (3565) 135.6 (3445)
in.(mm) 142.7 (3625) 138.0 (3505) 142.7 (3625) 138.0 (3505)
in. (mm) 95.3 (2420) 96.9 (2460)
in. (mm) 99.0 (2515) 100.6 (2555)
in. (mm) 73.0 (1860)
in. (mm) 82.1 (2085) 80.7 (2050) 82.1 (2085) 80.7 (2050)
in. (mm) 84.4 (2145) 83.1 (2110) 84.4 (2145) 83.1 (2110)
in. (mm) 430 460
in. (mm) 55.9-71.7 (1420-1820) 55.9-59.8 (1420-1520) 55.9-71.7 (1420-1820) 55.9-59.8 (1420-1520)
in. (mm) 52.0-67.7 (1320-1720)
ft. (m) 10.8 (3.3) 11.8 (3.6) 10.8 (3.3) 11.8 (3.6)
Ibs.(kg) 4240 (1925) 4550 (2065) 4650 (2110) 4785 (2170)
Ibs.(kg) 4850 (2200) 5160 (2410) 5315 (2410) 5445 (2470)
Specifications
Model
ROPS / CAB
Engine
Type (Make : KUBOTA)
No. of cylinders/Aspiration
Engine net power
PTO power
Total displacement
Engine rpm
Fuel tank capacity
Alternator
Transmission
No. of speeds
Main gear shift
Dual speed (Hi-Lo)
Shuttle shift
Main clutch type
Main clutch material / diameter
Brake type
Differential lock (Front / Rear)
4WD clutch type
PTO
Type
Speed
Hydraulics
Pump capacity (3-Point Hitch)
3-Point Hitch
Category
Control system
Lift capacity at 24 in. behind lift point
Cylinder type
No. of standard remote valves
Other features
4WD system
Steering
Tilt steering
Hood type / Pedal type
Deck type (ISO-mounted w/rubber mat)
Panel type
Fender shape
Standard tire size
2WD Front/Rear
4WD Front/Rear
Dimensions & weight
Overall length ROPS models
CAB models
Overall height top of ROPS
top of CAB
Overall width (minimum)
Wheelbase ROPS models
CAB models
Crop clearance (Front axle)
Tread width Front
Rear
Turning radius (w/o brake)
Tractor weight ROPS models
CAB models
M40Series
M7040 M8540
2WD 4WD 2WD 4WD
F-1/FC-1 DT-1/DTC-1 HD-1/HDC-1 F-1/FC-1 DT-1 / DTC-1 HD-1 / HDC-1 HD12-1 / HDC12-1
V3307-DI-T V3800-DI-T
E-CDIS, Direct Injection
4 / Turbocharged
HP(kW) 71 (52.9) 85.5 (63.7)
HP(kW) 64 (47.7) 76 (56.6)
cu.in. (cc) 203 (3331) 230 (3769)
2600
gal. (2) 18.5 (70) on ROPS model, 23.8 (90) on CAB models 23.8 (90) on ROPS model, 29.1 (110) on CAB models
45 Amp on ROPS model, 60 Amp on CAB model, 80 Amp: OPT
F8 / R8 F12/R12
Fully synchronized (4 speed) Fully synchro.(6 speed)
N/A
Synchro-shuttle Hydraulic-shuttle Synchro-shuttle Hydraulic-shuttle
Dry single plate Multiple wet disc Dry single plate Multiple wet disc
in. (mm) Cerametallic / 10.8 (275) Cerametallic / 12.8 (325)
- Hydraulic wet disc
- / Mechanical
Mechanical
Live-independent, hydraulic PTO with PTO brake, wet clutch
rpm 540 540 (540/1000 optional)
gpm (£/min.) 11.0 (41.6) 17.0 (64.3)
Telescopic lower link ends, telescopic stabilizers
1/1 II
Position, draft (top link sensing) & mixed control
Ibs. (kg) 3307 (1500) 4630 (2100), 7275 (3300): OPT 7275 (3300)
Two external cylinders
1 (2nd, 3rd optional) 1 (2nd, 3rd & flow control valve optional)
- Bevel gear type - Bevel gear type
Hydrostatic power steering
Standard
Full open, slanted, steel / Hanging
Semi-flat on ROPS models, full-flat on CAB models
Electronic
Wide, round
7.50-16 F2 9.5-24 R1 7.50-18 F2 11.2-24 R1
16.9-28 R1 18.4-28 R1
in. (mm) 140.4 (3565) 135.6 (3445) 153.0 (3885) 148.0 (3760)
in. (mm) 142.7 (3625) 138.0 (3505) 153.0 (3885) 148.0 (3760)
in. (mm) 97.2 (2470) 97.0 (2465)
in. (mm) 101.0 (2565) 101.0 (2565)
in. (mm) 73.0 (1860) 78.0 (1990)
in. (mm) 82.1 (2085) 80.7 (2050) 88.6 (2250)
in. (mm) 84.4 (2145) 83.1 (2110) 88.6 (2250)
in. (mm) 460 520 500
in. (mm) 559-71.7 (1420-1820) 55.9-59.8 (1420-1520) 56.7-80.3 (1440-2040) 59.8-63.8 (1520-1620)
in. (mm) 52.0-67.7 (1320-1720) 59.8-75.6 (1520-1920)
ft. (m) 10.8 (3.3) 11.8 (3.6) 12.1 (3.7) 13.8 (4.2)
Ibs.(kg) 4675 (2120) 4805 (2180) 5005 (2270) 5400 (2450)
Ibs.(kg) 5535 (2420) 5470 (2480) 5665 (2570) 6065 (2750)
Specifications
Model
ROPS / CAB
Engine
Type (Make : KUBOTA)
No. of cylinders/Aspiration
Engine net power
PTO power
Total displacement
Engine rpm
Fuel tank capacity
Alternator
Transmission
No. of speeds
Main gear shift
Dual speed (Hi-Lo)
Shuttle shift
Main clutch type
Main clutch material / diameter
Brake type
Differential lock (Front / Rear)
4WD clutch type
PTO
Type
Speed
Hydraulics
Pump capacity (3-Point Hitch)
3-Point Hitch
Category
Control system
Lift capacity at 24 in. behind lift point
Cylinder type
No. of standard remote valves
Other features
4WD system
Steering
Tilt steering
Hood type / Pedal type
Deck type (ISO-mounted w/rubber mat)
Panel type
Fender shape
Standard tire size
2WD Front/Rear
4WD Front/Rear
Dimensions & weight
Overall length ROPS models
CAB models
Overall height top of ROPS
top of CAB
Overall width (minimum)
Wheelbase ROPS models
CAB models
Crop clearance (Front axle)
Tread width Front
Rear
Turning radius (w/o brake)
Tractor weight ROPS models
CAB models
M40Series
M9540
2WD 4WD
F-1 / FC-1 DT-1 / DTC-1 HD-1 /HDC-1 HD12-1/HDC12-1 - / HDC24-1
V3800-DI-T
E-CDIS, Direct Injection
4 / Turbocharged
HP (kW) 95 (70.9)
HP (kW) 84 (62.7)
cu.in. (cc) 230 (3769)
2600
gal. (¢) 23.8 (90) on ROPS model, 29.1 (110) on CAB model
45 Amp on ROPS model, 60 Amp on CAB model, 80 Amp: OPT
F8/R8 F12/R12 F24 / R24
Fully synchronized (4 speed) Fully synchronized (6 speed)
N/A Standard
Synchro-shuttle Hydraulic-shuttle
Dry single plate Multiple wet disc
in. (mm) Cerametallic / 12.8 (325)
Hydraulic wet disc
- / Mechanical
Mechanical
Live-independent, hydraulic PTO with PTO brake, wet clutch
rpm 540 (540/1000 optional)
gpm ({/min.) 17.0 (64.3)
Telescopic lower link ends, telescopic stabilizers
II
Position, draft (top link sensing) & mixed control
Ibs. (kg) 4630 (2100), 7275 (3300): OPT 7275 (3300)
Two external cylinders
1 (2nd, 3rd & flow control valve optional)
- Bevel gear type
Hydrostatic power steering
Standard
Full open, slanted, steel / Hanging
Semi-flat on ROPS models, full-flat on CAB models
Electronic
Wide, round
7.50-18 F2 12.4-24 R1
18.4-30 R1
in. (mm) 153.0 (3885) 148.0 (3760)
in. (mm) 153.0 (3885) 148.0 (3760)
in. (mm) 98.0 (2490)
in. (mm) 102.0 (2590)
in. (mm) 78.0 (1990)
in. (mm) 88.6 (2250)
in. (mm) 88.6 (2250)
in. (mm) 520 500
in. (mm) — 56.7-80.3 (1440-2040) 59.8-63.8 (1520-1620)
in. (mm) 59.8-75.6 (1520-1920)
ft. (m) 12.1 (3.7) 13.8 (4.2)
Ibs.(kg) 5095 (2310) 5510 (2500)
Ibs.(kg) — 5755 (2610) 6175 (2800)
M40Series
Specifications
LOADER SPECIFICATIONS
Model LA1153 LA1353
Tractor applications M5140, M6040, M7040 M8540, M9540
Boom Cylinder Fulcrum Height position Power position Height position Power position
Maximum Lift Height (Pivot pin) in. (mm) 132.7 (3370) 117.2 (2977) 145.7 (3700) 131.9 (3350)
Clearance w/Attachment Dump in. (mm) 101.5 (2577) 85.5 (2172) 110.6 (2808) 94.7 (2405)
Reach @ Maximum Height in. (mm) 14.1 (357) 31.9 (811) 29.1 (738) 45.2 (1149)
Maximum Dump Angle degrees 43 60 52 64
Reach w/Attachment on Ground in. (mm) 76.7 (1947) 87.9 (2233)
Maximum Rollback Angle degrees 43 40
Digging Depth(When Bucket is Level) in. (mm) 5.3 (134) | 4.4 (111) 7.8 (198) | 7.3 (185)
Overall Height in Carry Position in. (mm) 61.9 (1573) 66.7 (1695)
Material Bucket Width/capacity(Heaped) in. /cu.ft.(ms) 72 / 19.43 (0.55) 72 / 19.43 (0.55), 84 / 22.60 (0.64)
Lift Capacity(Bucket Center) Ibs. (kg) 2326 (1055) | 2536 (1150) 2866 (1300) | 2977 (1350)
Raising Time to Full Height w/out Load» second 4.7 4.6
Lowering time w/out Load (powerdown) *» second 3.6 3.1
Attachment Rollback Time second 3.0 2.6
Attachment Dumping Time second 2.8 2.2
w/ Standard valves.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising