The VP-14xl is a port extender for RS

The VP-14xl is a port extender for RS
VP-14xl RS-232 Port Extender/Converter
The VP-14xl is a port extender for RS-232, RS-485 or USB command signals. The unit
converts the incoming commands to three RS-232 outputs.
● Inputs - 1 RS-232, 1 RS-485 and 1 USB port.
● Outputs - 3 RS-232 ports (2 9-pin sub & 1 3-pin terminal block).
● Hardware or Software Mode Operation.
● DIP-Switch Controls - For HW source, SW addressing and baud rate.
● Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with
the optional RK-3T rack adapter.
NEW WP-501 Active Wall Plate Solution for Simple Room Control and Signal Switching
The WP-501 is a switcher for computer graphics video, composite video, stereo audio and
microphone signals. With some of its input connectors placed on the back panel, it perfectly
fits rooms with permanently installed PCs and video sources. It routes one of three AV
input sources (one front & two rear) to a display and controls the display by IR or RS-232
● Front Panel Connections - Inputs: 1 computer graphics video on a 15-pin HD connector,
unbalanced stereo on a 3.5mm mini jack & 1 microphone on a 3.5mm connector.
● Rear Panel Connections - Inputs: 1 computer graphics video with unbalanced stereo,
1 composite video and stereo audio on terminal blocks; Outputs: 1 composite video, 1
computer graphics video and 2 audio outputs on terminal blocks; 2 relays & 1 IR on terminal
blocks; 1 Ethernet on an RJ-45 connection.
Controls - 2 volume control knobs: 1 audio and 1 microphone; front panel buttons: 1 projector
power and 3 input selection. Each programmable button performs command macros such
as changing projector inputs; 2 low voltage relays.
Display Control Ports - IR and bidirectional RS-232 for controlling the display device.
EDID Capture - Copies and stores the EDID from a display device on both VGA channels all
the time.
Kramer Site-CTRL™ Compatible - For network remote control and management using Kramer
Site-CTRL software over the Ethernet port.
Dimensions - 16.2cm x 3.36cm x 11.4cm (6.38” x 1.32” x 4.49”) US W, D, H.
Wall Plate Size - 3 gang US.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF