Aero Series

Aero Series
Aero Series
Product Catalog
Aero Series
Dry Ice Cleaning Equipment
This catalog contains Cold Jet’s Aero product offerings and part numbers that were current
at the time of catalog production. An item’s display in this catalog does not guarantee the item’s
availability at any time in the future. Images shown are for representative purposes only.
Products may vary from the images displayed. Cold Jet will always ship the latest version of an
available part, part numbers may vary, and invoices will always reflect the latest revision numbers.
Cold Jet is not liable for typographical errors or changes to specifications presented.
Check www.coldjet.com for the most recent version of this document.
Contact your Cold Jet representative for the most current information.
Notes
• Aero dry ice cleaning systems use standard 3 mm dry ice pellets
• Air consumption depends on the blasting pressure
• Air consumption data listed for all parts are approximate and without guarantee
• Blasting pressure can differ from the operating pressure and can vary during use
• Patented Rotor dosing system. Snow, dry ice and small particles can be eliminated
which may fall to the ground
• For technical questions, please consult Cold Jet application engineers
General Contact Information
USA Headquarters:
+1.513.831.3211
+1.800.337.9423
Latin America:
+52 (81) 1097 0445
Germany:
+49 (0) 6551 9606.0
Europe Headquarters: +32 (0) 1353.9547
Middle East:
+32 (0) 1353.9547
Canada:
+1.800.337.9423 x501
Asia/Pacific:
+81 3 4360 8347
Customer Support:
United States/Canada:
Europe:
Germany:
All other locations:
+1.800.777.9101
+32 (0) 1353 9659
+49 (0) 6551 9606.14
+1.513.576.8981
After-Hours HOTLINE:
United States/Canada:
All other locations:
+1.800.777.9101
+1.513.576.8981
Email:
United States
& all other locations:
Europe:
© Copyright Cold Jet, LLC 2010 (09.12.2011)
“Cold Jet” is a registered trademark of Cold Jet, LLC
service@coldjet.com
service.eu@coldjet.com
Aero Series
Dry Ice Cleaning Equipment
Aero 80 Series
Aero 80 Series Dry Ice Blast Cleaning Systems
The Aero 80 Series Blast Cleaning System comes complete with the following:
•
One length of 1” (2.5 cm) blast hose
•
One length of air hose
•
Applicator without light (Aero 80) with light (Aero 80 HP)
•
Specified nozzle to best suit cleaning application needs
•
Static Bond Cable
•
Nozzle Hanger (qty 1 for Aero 80/ qty 2 for Aero 80 HP)
•
Hose Wrap (qty 2) and Hose Carrier (qty 2)
The following additional items for Aero 80 HP
•
Hose Hangers (qty 2)
•
Cord Wrap and Extension Cord
•
Retractable Static Ground Reel
•
Dry Ice Recycling Bag
Part #: 2A0162 - Aero 80
2A0164 - Aero 80 HP
Aero 80 Series SPECIFICATIONS
Hopper capacity ............................. 80 lbs (36.4 kg) capacity
Variable feed rate ........................... 0 to 7 lbs (0 to 3.2 kg) per min
Blast pressure range
Aero 80 HP
with optional pressure regulator ...... 20 to 300 psi (1.4 to 20.7 bar)
without pressure regulator ................ 65 to 300 psi (4.5 to 20.7 bar)
Aero 80
with optional pressure regulator ...... 20 to 140 psi (1.4 to 9.7 bar)
without pressure regulator ................ 65 to 140 psi (4.5 to 9.7 bar)
Supply pressure range
Aero 80 HP ......................... 65 to 300 psi (4.5 to 20.7 bar)
Aero 80 ............................... 65 to 140 psi (4.5 to 9.7 bar)
Air consumption range ............ 50 to 215 cfm (1.4 to 6.1 m3/min) at 80 psi (5.5 bar)
Weight ....................................... 400 lbs (181 kg)
Size (L x W x H) .......................... 43” x 20” x 46” (109 cm x 52 cm x 118 cm)
12-month warranty (extended warranty packages available)
Aero 40 Series
Aero 40 Series Dry Ice Blast Cleaning Systems
The Aero 40 Series Blast Cleaning System comes complete with the following:
•
One length of 1” (2.5 cm) blast hose
•
One length of air hose
•
Applicator without light (Aero 40) with light (Aero 40 HP)
•
Specified nozzle to best suit cleaning application needs
•
Static Bond Cable
•
Nozzle Hanger (qty 1)
•
Hose Wrap (qty 2) and Hose Carrier (qty 2)
Part #: 2A0176 - Aero 40
2A0177 - Aero 40HP
Aero 40 Series SPECIFICATIONS
Hopper capacity ...................... 40 lbs (18.2 kg) capacity
Variable feed rate ..................... 0 - 4 lbs (0 - 1.8 kg) per min
Blast pressure range
Aero 40 HP
with optional pressure regulator ...... 20 to 250 psi (1.4 to 17.2 bar)
without pressure regulator ................ 65 to 250 psi (4.5 to 17.2 bar)
Aero 40
with optional pressure regulator ...... 20 to 140 psi (1.4 to 9.7 bar)
without pressure regulator ................ 65 to 140 psi (4.5 to 9.7 bar)
Supply pressure range
Aero 40 HP ......................... 65 to 250 psi (4.5 to 20.7 bar)
Aero 40 ............................... 65 to 140 psi (4.5 to 9.7 bar)
Air consumption range ........... 50 to 215 cfm (1.4 to 6.1 m3/min) at 80 psi (5.5 bar)
Weight....................................... 260 lbs (118 kg)
Size (L x W x H).......................... 36” x 20” x 40” (91 cm x 51 cm x 101 cm)
12-month warranty (extended warranty packages available)
Aero V
Aero V Dry Ice Blast Cleaning System
The Aero V Blast Cleaning System comes complete with the following:
•
One length of 1” (2.5 cm) blast hose
•
One length of air hose
•
Single Speed Applicator
•
323S1 nozzle with handle (unless otherwise specified)
•
Static Bond Cable
•
Hose Wrap (qty 1)
•
Hose Carrier (qty 1)
Part #: 2A0179 - Aero V
Aero V SPECIFICATIONS
Hopper capacity ...................... 30 lbs (13.6 kg) capacity
Variable feed rate ..................... 0 - 3 lbs (0 - 1.4 kg) per min
Blast pressure range
with optional pressure regulator ...... 20 to 140 psi (1.4 to 9.7 bar)
without pressure regulator ................ 65 to 140 psi (4.5 to 9.7 bar)
Supply pressure range
Aero V ............................ 65 to 140 psi (4.5 to 9.7 bar)
Air consumption range ........... 50 to 215 cfm (1.4 to 6.1 m3/min) at 80 psi (5.5 bar)
Weight....................................... 165 lbs (75 kg)
Size (L x W x H).......................... 28” x 17” x 32” (71 cm x 43 cm x 82 cm)
12-month warranty (extended warranty packages available)
Aero C100
Aero C100 Dry Ice Blast Cleaning System
The Aero C100 Blast Cleaning System comes complete with the following:
•
One length of 1” (2.5 cm) blast hose
•
One length of air hose
•
Pneumatic Applicator without light
•
Specified nozzle to best suit cleaning application needs
•
Static Bond Cable
•
Nozzle Hanger (qty 1)
•
Hose Wrap (qty 2) and Hose Carrier (qty 2)
•
1 qt/litre of Food Grade Oil
Part #: 2A0155 - Aero C100
Aero C100 SPECIFICATIONS
Hopper capacity ...................... 100 lbs (45.5 kg) capacity
Variable feed rate .................... 0 to 7 lbs (0 to 3.2 kg) per min
Blast pressure range
with optional pressure regulator ...... 20 to 140 psi (1.4 to 9.7 bar)
without pressure regulator ................ 65 to 140 psi (4.5 to 9.7 bar)
Supply pressure range ............. 65 to 140 psi (4.5 to 9.7 bar)
Air consumption range ........... 50 to 215 cfm (1.4 to 6.1 m3/min) at 80 psi (5.5 bar)
Weight....................................... 250 lbs (113.4 kg)
Size (L x W x H)......................... 31” x 15” x 45” (79 cm x 38 cm x 114 cm)
12-month warranty (extended warranty packages available)
Aero
Cold Jet’s Aero nozzles are designed to maximize performance whatever the application. Broad or precise cleaning, hard to reach
areas or working in a confined space, our line of nozzles will exceed your expectations.
Nozzles
Recommended operating parameters are shown in the tables for each nozzle. Nozzles noted with (*) are recommended for use
where blasting pressure is >140 psi (9.7 bar). Recommended accessory handle is noted where applicable.
Low and Standard Flow Nozzles
These straight nozzles have standard air
consumption rate of 100 cfm or less at 80 psi.
110S.6
123S.7
310S.5
323S1
312S1
Nozzle
Part #
Air
Consumption
Blast
Swath
Feed rate
Length
Material
Handle
110S.6
5E0180
50cfm @ 80psi
3
(1.4m /min @ 5.5 bar)
0.6”
(1.5 cm)
1-3 lbs/min
(0.5-1.4 kg/min)
10”
(25.4 cm)
Anodized
Aluminum
2E0209
123S.7
5E0179
50cfm @ 80psi
(1.4m3/min @ 5.5 bar)
0.7”
(1.8 cm)
1-3 lbs/min
(0.5-1.4 kg/min)
23”
(58.4 cm)
Anodized
Aluminum
2E0209
310S.5
5E0233
100cfm @ 80psi
(2.8m3/min @ 5.5 bar)
0.45”
(1.1 cm)
2-4 lbs/min
(0.9-1.8 kg/min)
10”
(25.4 cm)
Aluminum
2E0275
312S1
5E0156
100cfm @ 80psi
(2.8m3/min @ 5.5 bar)
1”
(2.5 cm)
2-4 lbs/min
(0.9-1.8 kg/min)
12”
(30.5 cm)
Aluminum
2E0289
323S1
5E0175
100cfm @ 80psi
3
(2.8m /min @ 5.5 bar)
1”
(2.5 cm)
2-4 lbs/min
(0.9-1.8 kg/min)
23”
(58.4 cm)
Aluminum
2E0209
High Flow Nozzles
These straight nozzles have air
consumption rate of more than
100 cfm at 80 psi.
507S2
510S.6
503M.8
505M.8
508M.8
523M1
523P1
523S3
533S1
533S2
Nozzle
Part #
Air
Consumption
Blast
Swath
Feed rate
Length
Material
Handle
507S2
5E0141
165cfm @ 80psi
(4.7m3/min @ 5.5 bar)
2”
(5.1 cm)
3-5 lbs/min
(1.4-2.3 kg/min)
7”
(17.8 cm)
Aluminum
n/a
510S.6
5E0232
140cfm @ 80psi
(3.9m3/min @ 5.5 bar)
0.6”
(1.5 cm)
2-4 lbs/min
(0.9-1.8 kg/min)
10”
(25.4 cm)
Aluminum
2E0275
503M.8
5E0095
150cfm @ 80psi
(4.3m3/min @ 5.5 bar)
0.6”
(1.5 cm)
3-5 lbs/min
(1.4-2.3 kg/min)
3”
(7.6 cm)
Aluminum
n/a
5E0108
150cfm @ 80psi
(4.3m3/min @ 5.5 bar)
0.6”
(1.5 cm)
3-5 lbs/min
(1.4-2.3 kg/min)
5”
(12.7 cm)
Aluminum
2E0209
5E0107
150cfm @ 80psi
3
(4.3m /min @ 5.5 bar)
0.6”
(1.5 cm)
3-5 lbs/min
(1.4-2.3 kg/min)
8”
(20.3 cm)
Aluminum
2E0209
5E0138
150cfm @ 80psi
(4.3m3/min @ 5.5 bar)
1”
(2.5 cm)
3-5 lbs/min
(1.4-2.3 kg/min)
23”
(58.4 cm)
Aluminum
2E0209
523P1
5E0167
150cfm @ 80psi
(4.3m3/min @ 5.5 bar)
1”
(2.5 cm)
3-5 lbs/min
(1.4-2.3 kg/min)
23”
(58.4 cm)
Polymer
2E0289
523S3
5E0190
165cfm @ 80psi
(4.7m3/min @ 5.5 bar)
3”
(7.6 cm)
4-6 lbs/min
(1.8-2.7 kg/min)
23”
(58.4 cm)
Aluminum
2E0287
533S1 *
5E0161
150cfm @ 80psi
(4.3m3/min @ 5.5 bar)
1”
(2.5 cm)
3-5 lbs/min
(1.4-2.3 kg/min)
33”
(83.8 cm)
Aluminum
2E0209
533S2 *
5E0164
150cfm @ 80psi
3
(4.3m /min @ 5.5 bar)
2”
(5.1 cm)
4-6 lbs/min
(1.8-2.7 kg/min)
33”
(83.8 cm)
Aluminum
2E0289
(MERN Technology)
505M.8
(MERN Technology)
508M.8
(MERN Technology)
523M1
(MERN Technology)
* Nozzles noted with (*) are recommended for use where blasting pressure is >140 psi (9.7 bar). Not available with the Aero V.
Variable Fragmenting MERN Nozzles
With patented MERN technology and new variable
fragmenting technology you have the power to control
aggression downstream of the nozzle throat for a full
range of performance with maximum effectiveness the most ever from a single nozzle.
110V.6
123V.7
312V2
323V2
5
508V.8
523V2
523V4
Nozzle
Part #
Air
Consumption
Blast
Swath
Feed rate
Length
Material
Handle
110V.6
5E0386
50cfm @ 80psi
(1.4m3/min @ 5.5 bar)
0.6”
(1.5 cm)
1-3 lbs/min
(0.5-1.4 kg/min)
10”
(25.4 cm)
Aluminum
2E0289
123V.7
5E0387
50cfm @ 80psi
3
(1.4m /min @ 5.5 bar)
0.7”
(1.8 cm)
1-3 lbs/min
(0.5-1.4 kg/min)
23”
(58.4 cm)
Aluminum
2E0209
312V2
5E0274
100cfm @ 80psi
(2.8m3/min @ 5.5 bar)
1.8”
(4.6 cm)
2-4 lbs/min
(0.9-1.8 kg/min)
12”
(30.5 cm)
Aluminum
2E0289
323V2
5E0252
100cfm @ 80psi
3
(2.8m /min @ 5.5 bar)
2”
(5.1 cm)
2-4 lbs/min
(0.9-1.8 kg/min)
23”
(58.4 cm)
Aluminum
2E0289
508V.8
5E0272
150cfm @ 80psi
(4.3m3/min @ 5.5 bar)
0.6”
(1.5 cm)
3-5 lbs/min
(1.4-2.3 kg/min)
8”
(20.3 cm)
Aluminum
2E0289
523V2
5E0238
150cfm @ 80psi
(4.3m3/min @ 5.5 bar)
2”
(5.1 cm)
3-5 lbs/min
(1.4-2.3 kg/min)
23”
(58.4 cm)
Aluminum
2E0289
523V4
5E0257
150cfm @ 80psi
(4.3m3/min @ 5.5 bar)
4”
(10.2 cm)
3-5 lbs/min
(1.4-2.3 kg/min)
23”
(58.4 cm)
Aluminum
2E0287
Specialty Nozzles
These nozzles have various configurations for
special applications and operate with
air consumption rates as noted.
112HK
307A135V.8
114P.5
308A45H.8
307A90H.8
307A45H1
307A90V1
309A45H.8
308A45V.8
317A90H1
Nozzle
Part #
Air
Consumption
Blast
Swath
Swath
Orientation
Feed rate
Length
Angle
112HK
2E0361
70cfm @ 80psi
(2.0m3/min @ 5.5 bar)
0.25”
(0.6 cm)
n/a
1-3 lbs/min
(0.5-1.4 kg/min)
12” x 2”
(30.5 x 5.1 cm)
160
114P.5
5E0183
70cfm @ 80psi
(2.0m3/min @ 5.5 bar)
0.25”
(0.6 cm)
n/a
1-3 lbs/min
(0.5-1.4 kg/min)
10.3”
(26.2 cm)
straight
307A135V.8
2E0328
100cfm @ 80psi
(2.8m3/min @ 5.5 bar)
0.75”
(1.9 cm)
Vertical
2-4 lbs/min
(0.9-1.8 kg/min)
7.3” X 6.3”
(18.6 x 16 cm)
135
307A45H1
2E0349
100cfm @ 80psi
(2.8m3/min @ 5.5 bar)
1”
(2.5 cm)
Horizontal
2-4 lbs/min
(0.9-1.8 kg/min)
7.3” x 5”
(18.5 x 12.7 cm)
45
307A90H.8
2E0326
100cfm @ 80psi
(2.8m3/min @ 5.5 bar)
0.75”
(1.9 cm)
Horizontal
2-4 lbs/min
(0.9-1.8 kg/min)
7” x 5.3”
(17.8 x 13.5 cm)
90
307A90V1
2E0329
100cfm @ 80psi
(2.8m3/min @ 5.5 bar)
1”
(2.5 cm)
Vertical
2-4 lbs/min
(0.9-1.8 kg/min)
7.3” x 7”
(18.6 x 17.8 cm)
90
308A45H.8
2E0324
100cfm @ 80psi
(2.8m3/min @ 5.5 bar)
0.75”
(1.9 cm)
Horizontal
2-4 lbs/min
(0.9-1.8 kg/min)
7.7” x 3.5”
(19.6 x 8.9 cm)
45
308A45V.8
2E0325
100cfm @ 80psi
(2.8m3/min @ 5.5 bar)
0.75”
(1.9 cm)
Vertical
2-4 lbs/min
(0.9-1.8 kg/min)
7.8” x 3.5”
(19.8 x 8.9 cm)
45
309A45H.8
5E0094
120cfm @ 80psi
(3.4m3/min @ 5.5 bar)
0.75”
(1.9 cm)
Horizontal
3-5 lbs/min
(1.4-2.3 kg/min)
8.9” x 4”
(22.6 x 10.2 cm)
45
317A90H1
2E0327
100cfm @ 80psi
(2.8m3/min @ 5.5 bar)
1”
(2.5 cm)
Horizontal
2-4 lbs/min
(0.9-1.8 kg/min)
16.6” x 3.4”
(42.2 x 8.6 cm)
90
509C
2E0411
150cfm @ 80psi
3
(4.3m /min @ 5.5 bar)
n/a
n/a
3-5 lbs/min
(1.4-2.3 kg/min)
9”
(22.9 cm)
22 cone
o
o
509C
Material
Polymer Coated
SST
Polymer
o
o
o
o
Polymer Coated
SST
o
o
o
o
Aluminum
Polymer Coated
SST
Multi
Nozzle Extension Tubes
Extension tubes are used to extend nozzles when additional reach is needed with minimal pressure loss.
Extension tubes connect to nozzle and applicator with proper fittings (not included).
Aero 80
Series
Aero 40
Series
Aero V
Aero
C100




Nozzle Extension Tube
3/4” (1.9 cm) OD
Internal threaded end fittings.
Available in 10” (25.4 cm), 20” (50.8 cm), and 30” (76.2 cm)
Recommended for use with nozzles that have a flow rating <100 cfm @ 80 psi (2.8 m3/min @ 5.5 bar)
Stainless Steel
Part #: 3E0715 - Length


Nozzle Extension Tube
1” (2.5 cm) OD
Internal threaded end fittings
Available in 10” (25.4 cm), 20” (50.8 cm), and 30” (76.2 cm)
Recommended for use with nozzles that have a flow rating >100 cfm @ 80 psi (2.8 m3/min @ 5.5 bar)
Aluminum
Part #: 3E0633 - Length


Nozzle Accessories
Extension tubes are used to extend nozzles when additional reach is needed with minimal pressure loss.
Extension tubes connect to nozzle and applicator with proper fittings (not included).
Aero 80 Aero 40
Series
Series
Aero V
Aero
C100


JICF Quick Change Module
Enables quick and safe nozzle changes
Can be used with all nozzles, with appropriate
couplings and end fittings
Part #: 2E0360 - 3/4” (1.9 cm)


Nozzle Adapter
3/4” (1.9 cm) JICM
Used with 3/4” (1.9 cm) JICF nozzles and extension tubes when used with AeroTech Applicator or QCM.
Aluminum












Part #: 2E0275 - 3/4” (1.9 cm) OD




Part #: 2E0275 -1” (2.5 cm) OD




Part #: 2E0275 - 1 3/16” (3 cm) OD








Part #: 3E0729
Nozzle Adapter
1” (2.5 cm) JICM
Allows connection of extension tube to applicator
Aluminum
Part #: 3E0976
Nozzle Base
1” (2.5 cm) JICM
Allows the 1” (2.5 cm) OD nozzle extension tube to be used with nozzle
Aluminum
Part #: 2E0420
Nozzle Handles
Attaches to nozzles in order to increase nozzle control when blasting.
Nozzle Handles
Attaches to nozzles in order to increase nozzle control when blasting.
Clamp Style (used with 523S3 and 523V4)
Part #: 2E0287
Applicators
Aero 80
Series
Aero 40
Series
Aero V
Aero
C100
AeroTech Applicator
Lightweight applicator with a low center of gravity significantly reduces arm fatigue. Safety on/off switch to ensure safety when
not blasting. Trigger switch allows the ability to blast with “Air Only” when purging the system and “Air and Ice” when ready to
clean. Integrated Quick Change feature enables operators to change nozzles safely and easily. Military-Grade light attachment mounted on top of Applicator will illuminate area being cleaned.
Part #: 2E0425-G1 (Applicator without light) Standard on Aero 40/80


Part #: 2E0425-G2 (Applicator with light) Standard on Aero 40HP/80HP


Pneumatic AeroTech Applicator
Lightweight applicator with a low center of gravity significantly reduces arm fatigue.
Safety on/off switch to ensure safety when not blasting.
Trigger switch allows the operator to blast with “Air Only” when purging the system or “Air and Ice” when ready to clean.
Integrated Quick Change feature enables operators to change nozzles safely and easily.
Military-Grade light attachment mounted on top of Applicator will illuminate area being cleaned.
Part #: 2E0426-G1 AeroTech Applicator without Light

Part #: 2E0426-G2 AeroTech Applicator with Light (shown)

High Performance Applicator
Lightweight, single-finger trigger allows easy control of blasting power. Safety switch. Designed for right and left anded users.
Includes a JIC fitting mounted to a rotary union for superior ergonomics. Integrated Quick Change feature so that nozzles can
be changed safely and easily. Single-speed.

Part #: 2E0362-G1 (1”) Standard on Aero V
Tight Access Applicator
Lightweight, simple & easy design for better control of blasting in areas where the access is tight.
Safety on/off switch to ensure safety when not blasting.
Part #: 2E0447 (includes QCM)



Mini Applicator
Small and lightweight design for ease of use and great control of blasting for applications where a smaller applicator is desired. Safety on/off switch to ensure safety when not blasting.
Part #: 2E0524-C (includes QCM)



Foot Switch
Eliminates the need for a hand-held control switch. Allows nozzle to be attached directly to the blast hose for better ergonomics. “Deadman style” safety foot pedal.
Part #: 2G1070




Part #: 2E0311
Remote Switch
Remote start/stop station for fixed applications.
Connects directly to blast control cable.
Part #: 2G1137



Blast Hose*
* One corresponding Bond Cable Shaft Collar is required per complete hose run (not one per section)
Aero 80
Series
Aero 40
Series
Aero V
Aero
C100

Blast Hose
20’ (6.1 m) section
Designed to eliminate constrictions and freezing up during blasting. Rated to 300 psi (20.7 bar)
Part #: 2N0221-G1 - 3/4” (1.9 cm) ID



Part #: 2N0221-G2 - 3/4” (1.9 cm) ID (with Control Cable)




Part #: 2N0221-G3 - 3/4” (1.9 cm) ID (with Air Tubing)
Part #: 2N0222-G1 - 1” (2.5 cm) ID



Part #: 2N0222-G2 - 1” (2.5 cm) ID (with Control Cable)





Part #: 2N0222-G3 - 1” (2.5 cm) ID (with Air Tubing)
Part #: 2N0223-G1 - 1 1/4” (3.2 cm) ID



Part #: 2N0223-G2 - 1 1/4” (3.2 cm) ID (with Control Cable)





Part #: 2N0223-G3 - 1 1/4” (3.2 cm) ID (with Air Tubing)
Kevlar Blast Hose
20’ (6.1 m) section
Designed to eliminate constrictions and freezing up during blasting. Rated to 300 psi (20.7 bar)
Part #: 5N0046 - 3/4” (1.9 cm) ID


Part #: 2N0210 - 3/4” (1.9 cm) ID (with Control Cable)


Part #: 5N0045 - 1” (2.5 cm) ID


Part #: 2N0201 - 1” (2.5 cm) ID (with Control Cable)


Part #: 5N0047 - 1 1/4” (3.2 cm) ID


Part #: 2N0204 - 1 1/4” (3.2 cm) ID (with Control Cable)


Part #: 3N0087 - 1 1/4” bore (for 3/4” hose)




Part #: 3N0088 - 1 1/2” bore (for 1” hose)




Part #: 3N0089 - 1 13/16” bore (for 1 1/4” hose)




Bond Cable Shaft Collar
One bond cable shaft collar is required per complete hose run.
Hoses, Cables and Connectors
Aero 80
Series
Aero 40
Series
Aero V
Aero
C100
5-Pin Control Cable
10’ (3.04 m) and 20’ (6.1 m) Section.
Used to connect remote, foot switch or Dual Trigger Interconnect Box to blast unit.
Part #: 3G0072 (10’ - 3.04 m)



Part #: 4G0819 (20’ - 6.1 m)



Control Tubing Assembly
20’ (6.1 m) Section
Used to connect foot switch or Dual Trigger Interconnect Box to blast unit.

Part #: 2N0213
Air Hose
25’ (7.6 m) Section 1” (2.5 cm) ID 300 psi (20.7 bar)
Used to carry pressurized air from air source to blast unit. Includes one swivel adapter.
*For each length of hose ordered, order one Whip Check!
Part #: 2N0199








Whip Check
Protects operator should a hose disconnection occur.
Recommended to have one whip check for each hose connection.
Part #: 4Z0051
Flow Divider
Splits one blast flow into two for simultaneous blasting while maintaining pellet integrity.
* Dual Trigger Interconnect Box is also required; Part #: 2G1157
* The Air Only Applicator Switch will not function if Flow Divider is being used.
Part #: 2E0320 - 1 1/4” (3.2 cm) flow to two 1”(2.5 cm) hoses




Part #: 2E0319 -1 1/2” (3.8 cm) flow to two 1 1/4” (3.2 cm) hoses








Dual Trigger Interconnect Box
Used with Flow Divider
Part #: 2G1157
Hoses, Cables and Connectors
Aero 80
Series
Aero 40
Series
Aero V
Aero
C100
JIC Fittings
Used to connect the hose to the blast machine and/or to connect extensions to some nozzles.
Part #: 12HTX-S - 3/4” (1.9 cm) JICM




Part #: 16HTX-S - 1” (2.5 cm) JICM




Part #: 20HTX-S - 1 1/4” (3.2 cm) JICM




Part #: 16-12TRBTX-S - 1” (2.5 cm) JICF to 3/4” (1.9 cm) JICM




Part #: 5N0013 - 1” (2.5 cm) JICM to 3/4” (1.9 cm) JICM Aerodynamic




Part #: 5N0004 - 1 1/4” (3.2 cm) JICF to 1” (2.5 cm) JICM Aerodynamic




Part #: 5N0003 - 1 1/4” (3.2 cm) JICM to 1” (2.5 cm) JICM Aerodynamic




Part #: 5N0022 - 1 1/2” (3.8 cm) JICM to 1 1/4” (3.2 cm) JICM Aero




Aero 80
Series
Aero 40
Series
Aero V
Aero
C100
Part #: 2M0025-G1 (Low Pressure)



Part #: 2M0025-G2 (High Pressure)



Filters and Regulators
LOW
Externally Mounted Pressure Regulator
Control your blast aggression with an externally mounted pressure regulator
Removable at the blast machine.
HIGH

Part #: 2M0022-G1
Internally Mounted Low Pressure Regulator
Internally Mounted Pressure Regulator
Control your blast aggression with this internally mounted pressure regulator
Includes pilot adjustment for placement on control panel
Part #: 2M0025-G11

Part #: 2M0025-G7


Part #: 2M0025-G3
Externally Mounted Coalescing Air Filter (CAF)
Designed to remove large amounts of water, oil, rust, and/or other particles from the air supply.
Part #: 2M0022-G1

Accessories
Aero 80
Series
Aero 40
Series
Aero V
Aero
C100




Aftercooler
Recommended when clean dry air cannot be guaranteed for blasting.
Part #: 2M0023-G1
Lubricator Oil
1 qt (litre) of food grade (FMO-150-AW) oil.

Part #: 4Z0617
Dry Ice Recycling bag
Collapsible bag used to capture unused dry ice from tilt out hopper (available only on Aero HP)
* Avialbale on the HP version only
Part #: 3T0138

Cord Wrap
Mounted to blast system in order to store electrical cord for transporting and storage.
Part #: 2J0229


Pivoting Hose Hanger
Used to hang hoses for storage or transportation of blast system.
Universal orientation on Aero 40/80, Left / Right orientation on Aero C100 (facing Control Panel).
Part #: 2J0228 -G1 (Qty 1)


Part #: 2J0236-G5 Right Side

Part #: 2J0236-G6 Left Side

Nozzle Hanger
The engineered Nozzle Hanger safely stores nozzles when not in use. Hanger can be mounted directly to the blast system.
Part #: 3J0897



Extension Cord & Reel
50’ (15.2 m) of electrical power cord used when additional length of cord is necessary.
* Contact Customer Service for other voltage options
Part #: 2H0017-G1 (110 Volts)



Accessories
Aero 80
Series
Aero 40
Series
Aero V
Aero
C100
Static Bond Cable
Connects the hose to the work piece being blasted bonding the two in order to virtually eliminate electrostatic discharge.
Part #: 2G1307 - (40’/12.2m) for use with standard blast hoses




Part #: 2G1282 - (20’/6.1m) for use with Urebrade and Kevlar hoses




Retractable Static Ground Reel
30’ (9.1 m) of retractable cable can be mounted on the underside of the blast system. The static cable is used to ground work
piece thru the blast system in order to reduce static build-up.

Part #: 2G1284
Hose Wrap
Velcro wrap used to assist in control and storage of your hoses.
Part #: 4Z0597







Hose Carrier
Durable rubber handle with fabric straps to help hang and carry hoses when moving or storing.
Part #: 4Z0590

Fire Sleeve
Recommended if blast hose might be exposed to temperatures above 180o F (82.26o C)
Allow 4’ (1.2 m) to 20’ (6.1 m) coverage for area of blast hose subject to high heat
Part #: 4N0094 - 3/4” (1.9 cm)




Part #: 4N0152 - 1” (2.5 cm)




Part #: 4N0153 - 1 1/4” (3.2 cm)




Safety Kit
Recommended Safety Kit for use with dry ice blasting equipment.
Meets OSHA requirements for operator noise protection (with the use of properly rated and worn ear plugs)
Kit includes the following:
- 100 sets of ear plugs
- 2 ear protectors
- Eye protector shield
- Gloves
- Dry ice scoop
Part #: 2Z0001




Global Headquarters
Loveland, OH USA
+1 800.337.9423
European Headquarters
Zolder, Belgium
+32 (0) 1353 9547
Global Headquarters
Loveland,
OH USA
Germany
+1
800.337.9423
Weinsheim, Germany
+49 (0) 6551 96060
European Headquarters
Zolder,
Belgium
Canada
+32
(0)13
53 95 47
Ontario, Canada
+1 800.337.9423 x501
Latin America
Monterrey, NL Mexico
+52 (81) 1097 0445
Middle East
Zolder, Belgium
+32 (0) 1353 9547
Asia/Pacific
Tokyo, Japan
+81 3 4360 8347
www.coldjet.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising