Electronic Water Timer
Electronic
Water Timer
Control Panel
➀
➁ ➂
➃
➄ ➅
➆
➇
Control Panel
1
Autorun
2
Setting Mode
3
Current Time
4
Advanced setting –
watering cycles
5
Watering Timer
6
Watering Duration
7
Skip a day or time
8
Low Battery
9
Activate Program
10 De-activate Program
ON
✓
✕
➈
➉
SU MO TU WE TH FR SA
Installing the batteries:
1
Unscrew the panel underneath the buttons on
the front of the Timer
2
Remove the battery case, and install 2 x AA
batteries
3
Push the case back into the Timer unit, replace
the panel and screw it into place
Cover the solar panel before you install your rechargeable or standard batteries.
When you first install the batteries, the valve will open and close several times
for around 30 seconds.
Manual Override
You can manually open and close the valve to water on demand.
To open the valve, press the MANUAL OPEN button.
To close the valve, press the MANUAL CLOSE button.
Setting up
Power saving mode (sleep mode)
This water timer has a power saving mode. If the timer is not operating, it will
automatically go into sleep mode. If you have the timer set, it will automatically
wake when the valve opens to begin watering, and return to sleep mode after
watering. If you need to change any settings while in sleep mode, just press the
WAKE UP button and the display will wake. Sleep mode only sends the LCD
screen to sleep, and does not affect the watering times you have set.
Setting the current time and day
• Press WAKE UP.
• Press SET OK so that the
is flashing at the top of the screen.
• Press SET OK again and the hour will be flashing.
• Press the + or – button to set the correct hour. Then press SET OK.
• The minute will now be flashing, so use the + or – button to set the correct
minute. Then press SET OK.
• The seconds will now be flashing, so use the + or – button to set the correct
seconds. Then press SET OK.
• The day at the bottom will now be flashing, so use the + or – button to set
the correct day. Then press SET OK.
• Press AUTO EXIT twice.
• The day and time is now set.
Setting a watering time
This allows you to program 9 of your own watering times and specific watering
durations.
• Press WAKE UP.
• Press SET OK, then + so that the
is flashing.
• Press SET OK until the number on the far left hand side is flashing. Press the
+ or – to select a number between 1-9 (this number is specific to setting this
watering time programme). Then press SET OK.
will be flashing (if not use the + or – to ensure that the tick is
• The
selected) then press SET OK.
• The hour digit of the time you want to start watering will now be flashing, so
press the + or – to set the time you want the timer to start watering. Then
press SET OK. TAKE NOTE OF AM AND PM.
• The minute digit will now be flashing, so press the + or – to set the time you
want the timer to start watering. Then press SET OK.
• Now you can set the duration that you want it to water for. The hour digit
should be flashing, press the + or – to set the number of hours that you want
it to water for. Then press SET OK.
• Press the + or – to set the number of minutes that you want it to water for.
Then press SET OK.
• Press the + or – to set the number of seconds that you want it to water for.
Then press SET OK followed by AUTO EXIT twice.
Your first program is now set. To set further programs of different watering
settings, please repeat the above steps. To avoid overwriting the programme
you just created, make sure you select a different number (between 1-9).
Selecting specific watering days
The timer is pre-set to water every day, so if this is your preferred frequency
nothing more needs to be done. If you wish to select specific watering days to
skip watering, please follow the steps below.
• Press WAKE UP.
icon is flashing, press SET OK.
• Press SET OK, and the + button until the
You can now remove the days you do not want the timer to water.
• SU will be flashing (to remove Sunday press –).
• Press SET OK to scroll through the days. When you get to the day you want
to alter, press the – button to remove that specific day to water.
• When you get to the end of the week an X will be flashing, so press AUTO
EXIT twice. If not, press + or – so that the X is showing then press AUTO
EXIT twice.
If you want to add days back into your watering schedule, press + when the
day you want to add flashes.
Advanced setting option
This setting allows you to create watering cycles. You can set the valve to open
at pre-set intervals. You can also select the length of time that you want the valve
to stay open for. For example, you can set the valve to open every 2 hours, and
stay open for 30 seconds. *Once set, it will take an entire cycle before the timer
begins to release water.*
• Press WAKE UP.
• Press SET OK, then + until the
icon is flashing, then press SET OK.
• The
will be flashing (if not use the + or – to ensure that the tick is
selected) then press SET OK.
• The hour will be flashing, so select the frequency of watering (For example,
if you would like it to water every hour, select 1:00:00). Press the + or – to set
the time, then press SET OK 3 times.
• The
icon will appear at the top of the display, which allows you to set the
duration of the watering.
• The hour will be flashing, so select how long you would like the timer to
water for. (For example, if you would like it to release water for 1 hour, select
1:00:00). Press the + or – to set the time, then press SET OK.
• The minute will be flashing, so select how long you would like the timer to
water for. (For example, if you would like it to release water for 30 minutes,
select 00:30:00). Press the + or – to set the time, then press SET OK.
• The seconds will be flashing, so select how long you would like the timer to
water for. (For example, if you would like it to release water for 30 seconds,
select 00:00:30). Press the + or – to set the time, then press SET OK until the
icon is no longer displayed.
• Press AUTO EXIT until the current time is displayed.
Please note:
• If you choose
, you will not be able to create a cycle.
• The watering duration needs to be longer than 10 seconds.
Any Questions? Contact our Gardening Angels
We are here to help you to get the best from your plants, so if you have any
questions about your water timer or the plants you are growing feel free to contact
one of our Gardening Angels on.
Call: 0845 602 3774
Email: info@GreenhouseSensation.co.uk
‘Like’ Us
Hints, tips and special offers
search ‘Greenhouse Sensation’
Watch our advice videos on
our website and Facebook.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising