® ALPHA RANGE F21165 FOAM SHELL The foam shell (code F21165) is available in a single version for the Alpha Spot HPE, Alpha Spot and Alpha Wash models. It is a valuable accessory that wraps and protects the product during transport. 52 2 (20 mm ,55 ") 605 mm (23,82") m 5m ) 63 ,00" (25 Weight: 8,8 Kg (19 lbs 6 ozs) FLIGHT CASE SPECIFICATION: INSIDE MEASUREMENTS 15 mm (0,59") Projector protrusion S 52 5 (20 mm ,87 " E DMX 605 mm (23,82") 620 mm (24,41") TX ) SEL m 8m 63 12") , (25 Total height with the projector inside 620 mm (24,41") studio m 0m 13 12") (5, N.B.: To secure the projector safely inside the flight case during transport, a spacer must be fixed to the inner surface of the cover. It should be made by the supplier of the flight case. This spacer should be made of expanded polyurethane or a similar material, with a density of 30 kg/m3 and width of 130mm; the height depends on the flight case model but, in any case, must be sufficient to secure the product. CLAY PAKY SPA - Via Pastrengo, 3/b - 24068 Seriate (BG) - Italy Tel. +39-035-654311 (10 linee) - Fax +39-035-301876 - Internet: www.claypaky.it Rev. 0 04/04 Cod. The foam shell must be inserted in a flight case, which the user should purchase or have made by a specialised company.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project