pumps
12
RV Product Catalog
In 1968, SHURflo’s primary scope of business focused on the manufacturing of quality
water pumping systems to meet the needs of the recreational vehicle industry.
Headquartered in California, SHURflo continues to provide every customer
with quality solutions for their water delivery, filtration and plumbing
fulfillment needs. With a dedicated sales and service team, as well as a distribution
center in Elkhart, Indiana, SHURflo successfully satisfies the requirements of customer
partners throughout the world. To accomplish this, SHURflo is committed to their vision of
Innovation, Quality and Service. IQS is the framework which defines SHURflo’s
past, present and future. It is the compass that sets the course to our continued success.
Contents
1
Revolution™ Series
Pumps
2-3
Fresh Water
Pumps
4
General Purpose
Pumps
10
Pump Fittings
5-7
Water System
Accessories
11-15
Pump Repair Kits &
Troubleshooting
8-9
Filtration
16-17
Installation &
Maintenance Tips
REVOLUTION 4008
™
pumps
³7KH1HZ6WDQGDUG
LQ59:DWHU3XPSV´
Revolution™ 4008 Series Pumps
SHURflo’s New Revolution™ fresh water pump design was created with a unique one-piece diaphragm
and internal by-pass, assuring long life and top performance in all plumbing systems. Designed as
the next legendary pump to exceed the expectations of our customers, the Revolution™ pump is
constructed for high flow demand, low noise and no rapid cycling. SHURflo’s quality reputation has
been built on the reliability and dependability of every pump we build. The Revolution™ fresh water
automatic demand pump is super quiet, thermally protected and can run dry without damage.
Mounts in any position.
Name
Model #
OEM# / Aftermarket#
Voltage
Dimensions
Inches/mm
Flow Rate
GPM/LPM
Amps
(Max.)
Shut-off
Pressure
SHURflo Revolution™
Pump
4008-101-A65
4008-101-E65
12 VDC
4.90” x 8.1O” x 4.30”
[125 x 206 x 110mm]
3.0 GPM
[11.4 LPM]
7.5
55 PSI
[3.7 BAR]
SHURflo Revolution™
Pump
4008-131-A65
4008-131-E65
24 VDC
4.90” x 8.1O” x 4.30”
[125 x 206 x 112mm]
3.0 GPM
[11.4 LPM]
4
55 PSI
[3.7 BAR]
1
1
FRESH WATER
pumps
NEW!
4048 High Flow Pump
The next pump in the by-pass Flow Reaction Technology Series, this pump has a unique one-piece
diaphragm and internal by-pass to assure smooth flow, long life and top performance in any
plumbing system. Designed and built for high flow, low noise, smooth flow with no rapid cycling
and SHURflo reliability, this fresh water demand pump is quiet and can run dry without damage.
Mounts in any position. This pump is designed to replace both the 4900 and 5900 Smart Sensor
series products.
2
Name
Model #
OEM# / Aftermarket#
Voltage
Dimensions
Flow Rate
GPM/LPM
Amps
Shut-Off
Pressure
4048
4048-153-A75
4048-153-E75
12VDC
10.3" x 4.9" x 4.8"
260 x 125 122 mm
4 GPM
15 LPM
10
55 PSI
3.8 BAR
FRESH WATER
pumps
Classic™ Series Multi-Fixture
Automatic Demand Pumps
These legendary pumps have set the standard for the RV Industry. SHURflo’s 2088 pumps
are equipped to deliver high performance and reliability every time they are used. SHURflo’s
potable water pumps operate three independent pumping chambers which allow the pump to
self-prime and lift water up to 6 feet. With smooth flow and uninterrupted operation, the Classic™ Series pumps include a built-in check valve to prevent back flow into the tank.
Each pump features an adjustable switch and has the capability to run dry without damage to
the pump or motor.
Name
Model #
OEM# / Aftermarket#
Voltage
Dimensions
Inches/mm
Flow Rate
GPM/LPM
Amps
(Max.)
Shut-off
Pressure
Premium Plus Pump
2088-453-144
2088-453-444
12 VDC
8.60” x 5.OO” x 4.45”
[218 x 127 x 113mm]
3.5 GPM
[12.5 LPM]
5
45 PSI
[3.1 BAR]
SHURflo Classic™ Pump
(A)
2088-422-144
2088-422-444
12 VDC
7.84” x 5.OO” x 4.62”
[199 x 127 x 117mm]
2.8 GPM
[10.6 LPM]
7
45 PSI
[3.1 BAR]
SHURflo Whisper King™
Pump (B)
2093-204-113
2093-204-413
12 VDC
7.75” x 5.OO” x 4.45”
[197 x 127 x 113mm]
2.0 GPM
[7.5 LPM]
5.5
30 PSI
[2.1 BAR]
SHURflo Standard Pump
2088-473-143
2088-473-443
24 VDC
7.75” x 5.OO” x 4.40”
[197 x 127 x 112mm]
2.8 GPM
[10.6 LPM]
2.5
30 PSI
[2-.1 BAR]
SHURflo Park Model Pump
2088-492-144
2088-492-444
115 VAC
8.70” x 5.OO” x 4.40”
[221 x 127 x 113mm]
3.3 GPM
[12.5 LPM]
0.9
45 PSI
[3.1 BAR]
A
B
Aqua King™ Mini 1.0 Pump
The SHURflo® Aqua King™ Mini 1.0 pump delivers quiet operation and smooth performance
while providing the ultimate in durability and reliability. This 12 VDC pump is designed and
built for single fixture fresh water delivery applications.
Name
Model #
OEM# / Aftermarket#
Voltage
Dimensions
Inches/mm
Flow Rate
GPM/LPM
Amps
(Max.)
Shut-off
Pressure
Aqua King™ Mini
1901-0003
1901-0013
12 VDC
6.40” x 3.2O” x 4.50”
[162 x 81 x 114mm]
1.0 GPM
[3.8 LPM]
3.0
30 PSI
[2.0 BAR]
SLV Single Fixture Automatic Demand Pump
This compact automatic demand fresh water pump offers durability and dependability making it ideal
for low volume, intermittent duty applications. The 105 pump self-primes up to 2.5 vertical feet while
delivering over 1.0 GPM. A 12 volt low power consumption motor, equipped with thermal protection
and long life pressure switch rated to 30 PSI, provides high pump performance and reliability
Name
Model #
OEM# / Aftermarket#
Voltage
Dimensions
Inches/Millimeters
Flow Rate
GPM/LPM
Amps
(Max.)
Shut-off
Pressure
SLV
105-003
105-013
12 VDC
6.82" x 3.94" x 2.45"
[17.3cm x 10cm x 6.2cm]
1.0 GPM
[3.7 LPM]
2.5
30 PSI
[2.0 BAR]
3
GENERAL PURPOSE
pumps
Macerator Pump
SHURflo’s Macerator is designed to accommodate the need for a reliable, high performance waste
evacuation pump. This pump incorporates a high quality motor with a new seamless shell design that is
thermally protected. The unique features of the Macerator include a premium impeller design with run dry
capability, a dual blade and housing construction for problem free operation.
Name
Model #
OEM# / Aftermarket#
Voltage
Dimensions
Inches/Millimeters
Flow Rate
GPM/LPM
Amps
(Max.)
Port Size
Macerator
3200-200
3200-001
3200-201
12 VDC
10.79" x 3.82" x 4.48"
[ 173 x 100 x 62 mm]
10.0 GPM
37.0 LPM
14
17
Inlet 1.5" Barb/1.5" NPT
Outlet 1" Barb
Standard & Premium General Purpose Pumps
Incorporating SHURflo’s advanced motor technology that includes thermal overload protection, this standard
general purpose pump is self-priming, easy to install and extremely versatile; perfect for a variety of uses
including winterizing, oil changing and liquid transfer. Premium model includes 8’ cable with battery clips.
A
B
Name
Model #
OEM# / Aftermarket#
Voltage
Dimensions
Inches/Millimeters
Flow Rate
GPM/LPM
Amps
(Max.)
Port Size
Standard General Purpose Pump (A)
8050-305-526
12 VDC
6.10" x 4.40" x 3.70"
[ 155 x 112 x 94 mm]
1.5 GPM
[5.6 LPM]
4.5
3/8” NPT-F
Premium General Purpose Pump (B)
8050-305-626
12 VDC
7.50” x 4.40” x 3.70”
[ 190 x 112 x 94 mm]
1.5 GPM
[5.6 LPM]
4.5
3/8” NPT-F
Oil Change/Winterizing System
Incorporating SHURflo’s advanced motor technology that includes thermal overload protection, this Oil
Change/Winterizing System is self-priming, easy to install and extremely versatile; perfect for a variety of
uses including winterizing, oil changing and liquid transfer. System includes premium pump with
8’ cables, battery clips, hose kit and 3.5 gallon storage bucket.
4
Name
Model #
OEM# / Aftermarket#
Voltage
Dimensions
Inches/Millimeters
Flow Rate
GPM/LPM
Amps
(Max.)
Port Size
Oil Change System
8050-305-426
12 VDC
16" H x 12.5" D
[406 x 318 mm]
1.5 GPM
[5.6 LPM]
4.5
3/8" NPT-F
WATER
system
accessories
Classic Series Strainers
Clean, clear economical strainers eliminate unnecessary repairs by keeping debris and other
particles out of the pump. Screws directly onto the pump head. Transparent design shows
when it is time to clean the bowl. Easy disassembly, cleaning and reassembly.
Name
Model #
OEM# / Aftermarket#
Description
Designation
Twist-on Water
Strainer (A)
255-213
255-313
Easy Assembly. Keeps Debris Out of Pump. Easy to See When Strainer
Needs Cleaning. 50 Mesh Stainless Steel Screen.
1/2" NPSM Inlet
1/2” NPSM Outlet
Twist-on Water
Strainer (B)
255-223
255-323
Easy Assembly. Keeps Debris Out of Pump. Easy to See When Strainer
Needs Cleaning. 50 Mesh Stainless Steel Screen.
1/2” Barb Inlet
1/2” NPSM Outlet
Swivel Nut Water
Strainer (C)
255-215
255-315
Easy Assembly. Keeps Debris Out of Pump. Easy to See When Strainer
Needs Cleaning. 50 Mesh Stainless Steel Screen.
1/2” NPSM Inlet
1/2” Female Swivel Outlet
Swivel Nut Water
Strainer (D)
255-225
255-325
Easy Assembly. Keeps Debris Out of Pump. Easy to See When Strainer
Needs Cleaning. 50 Mesh Stainless Steel Screen.
1/2” Barb Inlet
1/2” Female Swivel Outlet
A
C
B
D
For use with all model 1901, 2088, 2093, 4008 and 4048 Series pumps.
Pump Silencing Kit
Easy to install high-pressure flexible hoses are designed to fit between the pump and the
plumbing system to reduce unwanted rattling and plumbing vibration noises. Kit comes with
two ½” NPT-M pipe nipples for added convenience for a variety of systems.
Name
Model #
OEM# / Aftermarket#
Description
Pump Silencing Kit
94-591-01
Includes 2 of 411-020-00 and 2 1/2" male pipe couplers
18” Riser
411-010-00
Single 18" riser with 1/2" female swivel fittings
30” Riser
411-020-00
Single 30" riser with 1/2" female swivel fittings
36” Riser
411-030-00
Single 36" riser with 1/2" female swivel fittings
5
WATER
system
accessories
In-Line Check Valve
This check valve allows water to flow in only one direction helping to safeguard against back
surge pressure up to 100 PSI
Name
Model #
OEM# / Aftermarket#
Description
Designation
In-Line Check Valve
340-000
340-001
Allows Flow in One Direction Only to Safeguard Against Backsurge Up to 100 PSI [6.8 BAR].
1/2" Barb Ports
Hose Spray Nozzle
SHURflo’s Blaster™ Nozzle is designed to be used with SHURflo pumps producing spray action to
wash down boats, campers, trailers and other outdoor uses. The Blaster™ Nozzle has a lock clip for
continuous water flow and a smooth comfortable handle for easy handling.
Name
Model #
OEM# / Aftermarket#
Description
Designation
Hose Spray Nozzle
94-010-00
High Impact Plastic for Long Life. Use with SHURflo Pumps or Garden Hose.
Adjusts From Fine Mist to Full Stream. Lock Clip for Continuous Spray.
3/4" (F) Garden Hose
Thread
Pre-Pressurized Accumulator Tanks
SHURflo’s accumulator tanks are a perfect complement to the Classic™ Series Pumps. Specifically
designed to be installed downstream of your pump, these tanks help reduce unwanted cycling,
pulsation and pressure spikes, while helping to prolong pump life and save battery power. SHURflo
accumulator tanks use a patented domed displacement diaphragm to minimize noise and power
usage. These accumulators are available in both a 24 oz. nylon tank as well as a 2-gallon stainless
steel tank, helping to accommodate any space constraints in your RV.
A
B
6
Name
Model #
OEM# / Aftermarket#
Ports
Dimensions
Total Volume
Maximum PSI
Precharged
24 oz. Nylon Tank (A)
182-100
182-200
1/2" NPSM-Male
9.10" x 4.80" x 3.8”
[232 x 121 x 97 mm]
24 oz. [710 ml]
125 PSI [8.75 BAR]
30 PSI [2.1 BAR]
2 Gallon Stainless Steel
Tank (B)
3400-002
3400-002
1/2" NPT-Male
12” H x 9” D
[23 cm H x 10 cm D]
2 Gal. [8.0 L]
100 PSI [7.0 BAR]
20 PSI [1.4 BAR]
WATER
system
accessories
Pressure Saver City Water Entries
SHURflo’s exclusive diaphragm design prevents high-pressure damage often caused by city water
systems. These high performance water entries limit water pressure and they include a check valve.
3/4” GSH Female swivel inlet. 1/2" NPSM - Male Outlet
Model #
OEM# / Aftermarket#
Model #
OEM# / Aftermarket#
50 PSI Model
65 PSI Model
Wall Mount
Special Order
183-020-11
183-029-11
Cream/Cream
Wall Mount (A)
Special Order
183-020-14
183-029-14
Chrome/Chrome
Wall Mount (B)
Special Order
183-020-18
183-029-18
Gel White/Gel White
In-Line (C)
183-010-01
183-039-01
N/A
Cream/Cream
Name
Color
A
B
C
Faucets
SHURflo’s 94-009 series faucets offer smooth, easy flow with a washerless ceramic disc design. Versatile
360 degree spout rotation. Easy to use with city water system. 15-045-02 single touch faucet has a 1/4”
port and works perfectly with filtration systems.
Name
Model #
OEM# / Aftermarket#
Voltage
Ports
Amps
(Max.)
Operation
Spout
Rotation
Color
Electric Faucet (A)
94-009-00
94-009-10
12 VDC
3/8" Barb
3
Single
360˚
White
Electric Faucet
94-009-01
N/A
12VDC
3/8" Barb
3
Single
360˚
Gray
Single Touch Faucet (B)
15-045-02
15-045-02
N/A
1/4"
N/A
Single
Twist
Chrome
A
B
7
FILTRATION
Complete high-quality filtration offering
to fit every need and every budget
P5
10” Cartridge
Part Number
Product Description
155014-43
Spun Polypropylene
Taste &
Chlorine
Lead
THMs
VOCs
Cyst
Pesticides Micron Rating
Sediment Filter Only
5
Low pressure drop and high flow in a cellulose-free gradient density spun fiber solid matrix.
C1
10” Cartridge
Part Number
Product Description
Taste &
Chlorine
155002-43
Carbon Wrapped Paper
•
Lead
THMs
VOCs
Pesticides
Micron
Rating
•
•
5
THMs
VOCs
Pesticides
Micron
Rating
•
•
20
Cyst*
THMs
VOCs
Pesticides
Micron
Rating
•
•
•
0.5
Cyst
Economic solution for basic chlorine, taste and odor reduction. Low pressure drop and high flow.
CC-10
10” Cartridge
Part Number
Product Description
Taste &
Chlorine
155155-43
Coconut Shell Carbon
•
Lead
Cyst
Low pressure drop in a high flow, long life coconut shell carbon design.
CFBC-10
10” Cartridge
Part Number
Product Description
Taste &
Chlorine
255679-43
Modified Carbon Block
•
Lead
Low pressure drop in a long life cellulose-free synthetic fiber matrix. *Based on Manufacturer's internal testing.
CFB-PB10 10” Cartridge
Part Number
Product Description
Taste &
Chlorine
Lead
Cyst*
THMs
VOCs
Pesticides
Micron
Rating
255681-43
Modified Carbon Block
•
•
•
•
•
0.5
THMs
VOCs
Pesticides
Micron
Rating
•
•
5
Added lead reduction in a low pressure drop, high flow, long life cellulose-free synthetic fiber matrix.
*Based on Manufacturer's internal testing.
UDS-10EX1 10” Cartridge
8
Part Number
Product Description
Taste &
Chlorine
Heavy
Metals
255800-43
KDF/Carbon
•
•
Cyst
Superior long life, quad-stage bacteriostatic KDF/carbon filter with excellent heavy metal removal.
94-009-50
10” In-line Interior Filter
Part Number
Product Description
Taste &
Chlorine
Heavy
Metal
94-009-50
KDF /Carbon
•
•
Cyst
THMs
VOCs
Pesticides
Micron Rating
•
•
5
THMs
VOCs
Pesticides
Micron
Rating
•
•
5
THMs
VOCs
Pesticides
Micron
Rating
•
•
5
Long-life, high quality quad-stage bacteriostatic KDF/carbon in-line filter with fittings for every interior need.
RV-210GH-A
City Water Entry In-Line Filter
Part Number
Product Description
Taste &
Chlorine
RV-210GH-A
Activated Carbon
•
Heavy
Metals
Cyst
Long life triple-stage Carbon in-line city water entry filter with garden hose ends.
RV-210GH-KDF-A City Water Entry In-Line Filter
Part Number
Product Description
Taste &
Chlorine
Lead
RV-210GH-KDF-A
KDF /Carbon
•
•
Cyst
Long life, high quality quad-stage bacteriostatic KDF/carbon in-line city water entry filter with garden hose ends.
EV925206
Everpure Full-Timer
Part Number
Product Description
Taste &
Chlorine
EV925206
Micro-Pure Pleated
•
Lead
Cyst
THMs
VOCs
Pesticides
Micron
Rating
•
•
•
0.5
Cyst
THMs
VOCs
Pesticides
Micron
Rating
•
•
•
0.5
Exclusive technology reduces 99.9% of all particles ½ micron in size
EV925207
Everpure Part-Timer
Part Number
Product Description
Taste &
Chlorine
EV925207
Carbon Block
•
Lead
Exclusive technology reduces 99.9% of all particles ½ micron in size. Twin-pack.
Complete Aftermarket Filter System Kits
Model #
Included
Description
RV-10UC-A
C1 Filter, Housing, Wrench, Bracket
Kit, Fittings, Garden Hose
Complete 10” Filter housing with filter and fittings for use inside under the counter, as a whole-house filter,
or outside as a city water or tank fill filter.
EV925200
2 Complete EV925205 Systems with
POP Display Carton
Exclusive Everpure filtration system, includes installation kit and superchlorination disinfection kit.
Protects against bacteria, viruses and cysts down to 1/2 micron in size.
EV925205
EV925206 Filter, Housing, By-Pass,
Installation Kit
Exclusive Everpure filtration system, includes installation kit and superchlorination disinfection kit.
Protects against bacteria, viruses and cysts down to 1/2 micron in size.
Slim-Line Filtration System Components
Component
Model
Description
Housing
158196
10” Housing with 1/2” Female Ports
10” Housing with 1/2” Female Ports with Pressure Relief
Housing
158195
SW-1A Wrench
150539
Slim-Line Filter Housing Wrench
Bracket Kit
244047
Slim-Line Filter Housing Mounting Bracket with Screws
O-Ring Kits
Component
Model
Description
Waterguard Kit
94-178-09
10-Pack O-Ring Kit for 10” Waterguard Filter Housing
Slim-Line Kit
151121
Single-Pack O-Ring Kit for 10” Slim-Line Filter Housing
9
PUMP
fittings
Straight Fittings
Model #
Straight Fittings
Style
Material
Description
244-2906
Wingnut Swivel
Nylon
1/2"-15 NPT (F) x 1/4" Barb
244-2916
Wingnut Swivel
Nylon
1/2"-15 NPT (F) x 3/8" Barb
244-2926
Wingnut Swivel
Nylon
1/2"-14 NPT (F) x 1/2" Barb
244-2936
Wingnut Swivel
Nylon
1/2"-14 NPT (F) x 5/8" Barb
244-2946
Wingnut Swivel
Nylon
1/2"-14 NPT (F) x 3/4" Barb
244-5146
Adapter
Nylon
1/2" NPT (M) x 3/4" Barb
244-5366
Adapter
Nylon
1/2" NPT (F) x 1/2" NPT (M)
Elbow Fittings
Model #
Elbow Fittings
Style
Material
Description
244-3366
Wingnut Swivel
Nylon
1/2"-14 NPT (F) x 1/2"-14 NPT (M)
244-3906
Wingnut Swivel
Nylon
1/2"-14 NPT (F) x 1/4" Barb
244-3916
Wingnut Swivel
Nylon
1/2"-14 NPT (F) x 3/8" Barb
244-3926
Wingnut Swivel
Nylon
1/2"-14 NPT (F) x 1/2" Barb
244-3936
Wingnut Swivel
Nylon
1/2"-14 NPT (F) x 5/8" Barb
244-3946
Wingnut Swivel
Nylon
1/2"-14 NPT (F) x 3/4" Barb
Garden Hose Wingnut Fitting
Model #
Tee Fittings
Style
Material
Description
244-2356
Wingnut Swivel
Nylon
3/4" GHT (M) x 1/2" NPT (F)
Swivel Straight Fitting Adapter
Model #
Tee Fittings
Style
Material
Description
244-2866
Wingnut Swivel
(Pump/Accumulator Fitting)
Nylon
1/2" NPT (F) x 1/2" NPT (F)
Tee Fittings
10
Model #
Tee Fittings
Style
Material
Description
244-4522
Barb Tee
Polypropylene
1/2” Barb x 1/2” Barb x 1/2” Barb
PUMP REPAIR
& rebuild kits
SHURflo pumps have set the standard for RV performance and reliability. To keep that performance and reliability at its peak,
SHURflo offers a wide range of kits for bench and field repair of its products. For detailed listings of individual part numbers, refer to
SHURflo pricing guides and repair manuals. This overview indicates the type of kits available.
2088/2093 Series
Name
Model #
OEM/Aftermarket
Upper
Housing
Valve
Assembly
Drive
Assembly
Motor
Pump Head
Kit
Check
Valve
1
2
3
4
5
Not Shown
Premium Plus
Pump
2088-453-144
2088-453-444
94-231-20
94-231-20
94-232-06
94-232-06
94-238-04
94-238-04
94-11-173-01
94-11-173-01
94-236-08
94-236-08
94-237-00
94-237-00
Classic™ Pump
2088-422-144
2088-422-444
94-231-20
94-231-20
94-232-06
94-232-06
94-238-03
94-238-03
94-11-261-00
94-11-261-00
94-236-21
94-236-21
94-237-00
94-237-00
Whisper King™
Classic Pump
2093-204-113
2093-204-413
94-231-24
94-231-24
94-232-06
94-232-06
94-238-05
94-238-05
94-11-192-00
94-11-192-00
94-236-05
94-236-05
94-237-00
94-237-00
Standard
Pump
2088-473-143
2088-473-443
94-231-24
94-231-24
94-232-03
94-232-03
94-238-04
94-238-04
94-11-142-10
94-11-142-10
94-236-08
94-236-08
94-237-00
94-237-00
Park Model
2088-492-144
2088-492-444
94-231-20
94-231-20
94-232-04
94-232-04
94-238-03
94-238-03
94-11-150-10
94-11-150-10
94-236-21
94-236-21
94-237-00
94-237-00
4
3
2
1
4008 Series
Name
Model #
OEM/Aftermarket
Upper
Housing
Valve
Assembly
Drive
Assembly
Motor
Pump
Head
Check
Valve
Switch
1
2
3
4
1,2,3
Not Shown
Not Shown
Revolution™
12
4008-101-A65
4008-101-E65
94-800-00
94-800-00
94-800-01
94-800-01
94-800-02
94-800-02
94-11-302-00
94-11-302-00
94-800-04
94-800-04
94-800-03
94-800-03
94-800-05
94-800-05
Revolution™
24
4008-131-A65
4008-131-E65
94-800-00
94-800-00
94-800-01
94-800-01
94-800-02
94-800-02
94-11-303-00
94-11-303-00
94-800-04
94-800-04
94-800-03
94-800-03
94-800-05
94-800-05
4
3
2
1
11
PUMP REPAIR
& rebuild kits
4048 Series
Name
Model #
OEM/Aftermarket
Upper
Housing
Valve
Assembly
Drive
Assembly
Motor
Pump
Head
Check
Valve
Switch
1
2
3
4
1,2,3
Not Shown
Not Shown
4048
12VDC
4048-153-A75
4048-153-E75
94-801-01
94-801-01
94-800-01
94-800-01
94-801-02
94-801-02
94-71-001-07
94-71-001-07
94-801-04
94-801-04
94-800-03
94-800-03
94-801-05
94-801-05
4
3
1
2
8050 Series
Name
Utility Pumps
Model #
OEM/Aftermarket
Pumphead
Repair Kit
1
Switch
2
Check Valve
3
Upper Housing
4
Valve Assembly
5
Diaphragm
6
Drive Assembly
7
Motor
8
8050-305-XXX
8050-305-XXX
N/A
N/A
N/A
N/A
94-391-12
94-391-12
N/A
94-385-42
94-385-42
94-11-148-12
5
4
3
2
8
1
7
12
6
PUMP REPAIR
& rebuild kits
5900 Series
Name
Model #
OEM/Aftermarket
Switch
1
Upper
Housing
2
Valve
Assembly
3
Drive
Assembly
4
Motor
5
Smart Sensor™ 5.7
12 VDC
5900-0201
5900-0211
N/A
94-670-02
94-670-02
94-030-01
94-030-01
94-030-02
94-030-02
N/A
5
4
3
2
1
4900 Series
5
Name
Model #
OEM/Aftermarket
Switch
1
Upper
Housing
2
Valve
Assembly
3
Drive
Assembly
4
Extreme™ Series
Smart Sensor™ 4.0 12 VDC
4900-0201
4900-0211
N/A
94-670-01
94-670-01
94-669-00
94-669-00
94-670-00
94-670-00
4
Motor
5
3
N/A
2
1
3200 Series
Name
Model #
OEM/Aftermarket
Impeller Kit
1
Impeller Housing Kit
2
Macerator 12 VDC
3200-200
3200-201
94-571-00
94-571-00
94-570-00
94-570-00
13
COMFORT AIR
service part kits
Service Parts Kits
All kits contain necessary mounting
screws & hardware
Item
Description
Parts Kit
Vent Lid. Tinted with Hinge
94-073-00
Vent Lid. White with Hinge
94-073-01
2
Universal Fan motor
94-073-02
3
Universal Lift Arm Assembly
94-073-03
4
Universal Rain Sensor
94-073-04
5
Universal Chassis Gasket
94-073-05
Chassis, Ceiling Control
N/A
Chassis, Remote Control
N/A
Universal Lift Motor
94-073-08
Circuit Board Assembly, Remote, Receiver
94-073-09
Circuit Board Assembly, Ceiling, Exhaust Only
94-073-10
Circuit Board Assembly, Ceiling, Bi-Directional
94-073-11
Remote Control (84-2010-03)
For Models R1210, R1231, R1232, R1234, R1331, R1332
94-073-12
Remote Control (84-2010-00)
For Models R0301, R0302, R0321
94-073-13
Remote Control (Grey, 84-2010-13)
For Models R3231
94-073-14
Remote Control (84-2010-02)
For ModelsR0232, R0311, R0312, R0332
94-073-15
Remote Control (84-2010-01)
For Models R1202
94-073-27
Interior Panel, Remote Control
N/A
Interior Panel, Ceiling Exhaust Only
N/A
Interior Panel, Ceiling Bi-Directional
N/A
11
Universal Fan Blade
94-073-19
12
Knob Kit (Dome Crank and Fan Speed Knob)
94-073-20
13
Universal Screen Ring
94-073-21
14
Trim Expansion Ring
94-073-24
Not Shown
Bi-Directional Switch, Ceiling Control
94-073-25
1
6
7
8
9
10
14
PUMP
troubleshooting guide
Possible Cause
Symptom
Possible Cause
Noise
Pump
Cycles
On-Off-On
Pump Won’t
Start
Pump Won’t
Shut Off
Tank Fills
on City Water
Pump Starts
with Fixtures
Closed
Pump Loses
Prime
Pump Will
Not Prime
Low Flow
•
•
Kinked Inlet Hose
•
Hard Plumbed Pump
•
Elbows at Pump
•
Pipes Hitting
•
•
Clogged Tank Outlet
•
•
•
Clogged Tank Stainer
•
•
•
Clogged/Small I.D. Winterizing Valve
•
•
•
Clogged/Small I.D. Shut-Off Valve
•
•
•
Small I.D. Hose at Pump Inlet
•
•
•
•
•
•
•
•
•
Pump Too Far From Tank
Collapsing/Non-Vacuum-Rated Hose
•
•
Small I.D.Hose at Pump Outlet
•
Inlet Air Leak
•
•
•
Air In System
•
•
•
•
•
Cracked Strainer
•
•
•
Loose Pump Fittings
•
Pipes Banging in System
•
Kinked Outlet Hose
•
•
•
Small I.D. Hose at Heater/Toilet
•
•
•
Bad City Water/Tank Fill 3-way Valve
•
•
Clogged Faucet Aerators
•
•
•
Flow Restrictors
•
•
•
•
•
Dirty/Worn Pump Valves
•
Dirt/Worn Check Valve
Bad Drive Assembly
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Ruptured Main Diaphragm
•
Ruptured Switch Diaphragm
•
•
•
•
•
•
•
Loose Wire at Switch
Loose Pump Screws
•
•
Pinched Main Diaphragm
Bad Microswitch
Leaks
•
•
•
Leaking Fixtures/Fittings
Frozen Pump
•
Motor Thermal Overload (Hot Motor)
•
Bad Motor
•
Bad Pump Mount (thin, loose, etc.)
•
•
•
•
•
Low Voltage
•
•
•
•
•
15
Installation & Maintenance tips
Pump Mounting
SOLID SURFACES are required to lessen vibration and noise. A thin surface can amplify noise.
EASY ACCESS for strainer and pump maintenance is needed, as well as space around the pump to keep it cool.
POSITIONING the pump horizontal is best, but most pumps can be mounted in any position. Pumps will push water better than pull, so
mount the pump within 6 feet of the water tank for best performance.
ANCHOR the pump snug, but don’t flatten the feet to keep vibration from transmitting to the system.
Inlet Side of Pump
FLEX LINES help reduce normal vibration of the pump being transmitted through the system. The lines should be rated to not collapse
under pump vacuum. Collapsing inlet lines cause pump starvation, cavitation and noise. Route lines so they don’t kink.
STRAINERS with adequate screen size are required to keep debris out of the pump and minimize vacuum and circulation.
VALVES for tank shut-off or winterizing should be full-port style, or as open as possible to reduce vacuum and cavitation, which
cause system noise.
PUMP FITTINGS on both inlet and outlet must seal on the internal taper of the threaded pump ports. For quick-connect fittings, make
sure the O-rings are lubricated and the fittings are pushed in straight. Minimize side-to-side stresses on all plumbing system fittings.
Outlet Side of Pump
FLEX LINES should be anchored where the flex meets the hard tubing and throughout the coach. Make sure plumbing does not rattle
behind walls, showers and where it goes through walls and shelves. Valves should be full-flow with minimum back pressure. Check
Valves on the water heater inlet keep hot water from pressurizing the cold water side of the system.
ACCUMULATORS should be charged to the restart [On] pressure of the pump to provide the best system flow, low pump cycling and
smooth performance. The Extreme™ and Revolution™ series pumps do not require an accumulator.
Pump Electrical
WIRE SIZE is very important to keep proper voltage at the pump. See the chart for wire sizing.
FUSING & SWITCHING are very important, as they allow shutting the pump off separately for service and providing an extra layer
of safety in case of problems. Be careful with pump switch controllers. Older power converters may need direct wiring to the battery
with the Extreme™ Series pumps.
Filtration
Your choice of filtration products will depend on your RV Lifestyle. From part-time to full-time, from pop-up to Class A’s and beyond,
SHURflo water filters will meet your needs.
IN-LINE FILTERS are great for under-the-sink installation, separate single-tap faucets and icemakers. They are sized to meet many flow and
life requirements, and can even be used to filter the water coming in through the city water entry. Be sure to make clean tubing cuts, and
handle tubing carefully to avoid scratches, kinks and damage.
HOUSING & CARTRIDGE FILTERS combine the ease and convenience of a permanent installation with a variety of filter media choices
to meet your needs. If the housing is installed for “Full-House Filtration”, make sure the filters meet your needs. A high flow of water through a
filter reduces its’ ability to clean the water and can create significant backpressure on the pump, creating low system pressure and flow. Most
filters are only designed to filter at a low flow rate.
16
Filtration Continued…
If you want to use REVERSE OSMOSIS, the standard RV pumps are not designed for the high pressures and continuous-duty cycles that are
needed. Contact SHURflo for help here. Do not use filters with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the unit. Some state and local laws and regulations may pertain to the installation of any plumbed-in components.
Check for compliance in your area. Do not install filters near a heat source. Do not allow filters to freeze. Do not expose filters to direct
sunlight or Ultra Violet radiation [UV]. Do not use filters beyond stated capacity. Do not attach filters to hot water lines. Do not overpressurize
filters.
City Water with Filter
14GA or Heavier Wire
Battery (+)
Connector
Fuse
Black
12 VDC 15 Amp Circuit
Total Wire Length*
Solid Surface
Flexible Braided Hose
Strainer
Typical Pump Installation
Feet [Meters]
1-10 [.3-3]
11-20 [3.3-6]
21-30 [6.4-9.1]
31-40 [9.1-12.2]
41-60 [12.2-18.3]
Minimum Wire Size
3% Drop
#12
#10
#8
#6
#6
10 % Drop
#16
#14
#14
#12
#10
*Length from power source to motor and back to ground.
Red wire (+) positive. Black wire (–) negative.
General System Care
Road vibration can loosen system components. Check all plumbing components, fittings and connections regularly. If something is loose,
tighten it up. Don’t store things on top of plumbing system components.
SANITIZING keeps your system clean. Make sure to follow your manufacturer and component manuals for recommendations and sanitize
your system. It’s easy to do and helps to extend component life. Many pump and valve failures can be attributed to scaling or other build-up
that could easily be prevented with proper maintenance. Bypass or remove filters before sanitizing.
WINTERIZING Don’t let plumbing system components freeze with water in them. Severe damage and flooding can result. Use
winterizing procedures recommended by the coach manufacturer or your local dealer. There are many good ways to winterize systems for
freezing weather and long storage.
17
SHURflo North America, Latin America,
Carribean, Pacific Rim
Phone (562) 795-5200
Toll Free (800) 854-3218
Fax (562) 795-7564
Form# MS-030-138 Rev. 11/11
© 2005-2011 SHURflo, All Rights Reserved.
SHURflo East
52748 Park Six Court
Elkhart, IN 46514-5427
Phone (562) 795-5200
Toll Free (800) 854-3218
Fax (574) 264-2169
SHURflo Europe, Middle East, Africa
Pentair Water Belguim bvba
Industriepark Wolfstee, Teekomstlann 30
B-2200 Herentals, Belguim
Phone +32-14-283500
Fax +32-14-283505
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising