blade - Astra Model
B L A D E
H
E-flite ® is an exclusive brand of Horizon Hobby, Inc.
EFLHC2007CBA
© 2007 Horizon Hobby, Inc.
4105 Fieldstone Road, Champaign, IL 61822
www.E-fliteRC.com
For additional information or your nearest E-flite retailer,
call toll-free 877-504-0233.
10789
E
L
I
C
O
P
T
E
R
S
FROM PUPIL TO PRO
There’s a Completely Ready-To-Fly
Blade Heli for Every Step of Your
Heli Experience
When
it
of-the-art
comes
to
combining
helicopter
state-
technology
and
ready-to-fly convenience, nobody does
it better than E-flite ®.
experience-necessary
From the noBlade ™
CX2
to
the extremely capable Blade 400 3D,
every Blade in the line comes equipped
with
top-quality
power
systems
and
electronics. And all can be up and flying
in as little time as it takes you to drive
home from the hobby store and charge
the battery pack.
To find an E-flite Blade retailer near you,
visit www.E-fliteRC.com.
BLADE CX RTF
BLADE CX RTF
Leave it to the electric flight experts to create a
hobby-quality micro RC heli anyone can afford, as
well as fly. With the E-flite ® Blade™ CX you get a
completely assembled and ready-to-fly micro heli
with a coaxial counter-rotating head design that is
so stable almost any first-time pilot can be hovering
like a pro in no time. And you get it all for less than
$170. But besides being affordable and easy to fly,
the Blade CX offers things other similarly designed
micro helis can’t—the power and precision of
E-flite S75 servos, the reliability of E-flite’s advanced
4-in-1 controller unit and a great-looking, lightweight body that really stands out from the crowd.
When it comes to micro heli fun truly anyone can
enjoy, nothing comes close to the value and performance of the Blade CX.
EFLH1200 Specifications
HELI
Main Rotor Diameter: 13.6 in (345mm)
Length: 15.7 in (400mm)
Weight with Battery: 8.0 oz (227 g)
Main Motor: 180 (2 installed)
Battery: 2S 7.4V 800mAh Li-Po (included)
Transmitter: FM 4-channel (included)
On-Board Electronics: 4
-in-1 receiver/mixer/ESC/gyro
(installed)
Servos: 7.5-gram S75 sub-micro (2 installed)
Recommended Optional & Replacement Parts
EFLB0990
EFLH1205
EFLH1220
EFLH1221
EFLH1240
EFLH1244
EFLH1245
EFLH1246
2S 7.4V 800mAh Li-Po Pack
Training Gear Set
Lower Main Blade Set (2 pair)
Upper Main Blade Set (2 pair)
Inner Shaft with Alum Head/Hub
Alum Bearing Holder with Bearing
Aluminum Lower Rotor Head Set
Aluminum Swashplate Set
Besides being easy to fly, the Blade CX
comes equipped with the power and
precision of E-flite S75 servos as
well as the setup simplicity of E-flite’s
lightweight 4-in-1 controller.
No assembly is needed and there is
nothing left to buy. In addition to the
4-channel FM transmitter and 8 AA
batteries, the Blade CX also includes
a rechargeable 2S 7.4V 800mAh
Li-Po battery pack, DC Li-Po charger, AC
charger adapter and a step-by-step instructional VCD that helps ensure your
flight is a successful one.
The optional Training Gear Set
(EFLH1205; sold separately) makes
learning to fly the Blade CX even
easier than it already is by adding
more stability and helping to prevent
blade strikes.
www.E-fliteRC.com
BLADE CX2 RTF
The Blade CX2’s coaxial, counter-rotating blades cancel out the
rotational torque that makes hovering a conventional heli so diffcult.
Instead of a tail rotor, the Blade CX2 uses differential rotor speed for
tail control so the inherent stability of the counter-rotating blades is
preserved in all phases of flight.
BLADE CX2 RTF
The Blade CX2 takes the excitement and beginnerfriendly flight stability of the original Blade CX and
adds Spektrum™ 2.4GHz DSM ® radio control technology that lets you fly anywhere, anytime without
ever having to worry about interference. It’s the first
ready-to-fly RC aircraft of any kind to come with this
extraordinary technology built in. The 4-in-1 control
unit has also been updated with improved gyro and
tail control that gives the Blade CX2 even better tail
response, while minimizing drift. Two feather-light
S60 Super Sub-Micro Servos provide powerful, precise cyclic control. Topping it all off is an aggressive
body design that looks fantastic in flight and is unlike
anything else out there.
™
EFLH1250 Specifications
HELI
Main Rotor Diameter: 13.6 in (345mm)
Length 16.4 in (417mm)
Weight with Battery: 8.0 oz (227 g)
Main Motor: 180 (2 installed)
Battery: 2S 7.4V 800mAh Li-Po (included)
Transmitter: 2.4GHz DSM 5-channel (included)
On-Board Electronics: 4
-in-1 receiver/mixer/ESC/gyro
(installed)
Servos: 6.0-gram S60 super sub-micro (2 installed)
Recommended Optional & Replacement Parts
EFLB0990
EFLH1205
EFLH1208
EFLH1220
EFLH1221
EFLH1240
EFLH1244
EFLH1245
EFLH1246
2S 7.4V 800mAh Li-Po Pack
Training Gear Set
Main Motor Heat Sink
Lower Main Blade Set (2 pair)
Upper Main Blade Set (2 pair)
Inner Shaft with Aluminum Head/Hub
Aluminum Bearing Holder w/Bearing
Aluminum Lower Rotor Head Set
Aluminum Swashplate Set
No assembly is needed and there is nothing left to buy. In addition to the 2.4GHz
DSM 5-channel transmitter and 4 “AA”
batteries, the Blade CX2 also includes
a rechargeable 2S 7.4V 800mAh Li-Po
battery pack with Charge Protection Circuitry,
DC Li-Po Balancing Charger, AC charger adapter
and a step-by-step instructional VCD that helps
ensure your first flight is a successful one.
With DSM, you never have
to worry about interference
from other RC users, nearby
2.4GHz devices or commercial
transmission towers. There is
no tuning and no channels to
select. Just power up and fly,
anywhere, anytime.
The optional Training Gear Set
(EFLH1205; sold separately) makes
learning to fly the Blade CX2 even
easier than it already is by adding
more stability and helping to prevent blade strikes.
www.E-fliteRC.com
BLADE CP+ RTF
BLADE CP+ RTF
The Blade CP+ is the perfect “next step” for anyone
who’s mastered the basics of heli flight with a coaxial
heli like the Blade CX or CX2, and is ready for a
model capable of more advanced maneuvers.
The Blade CP+ includes all the impressive features
of the original Blade CP, like CCPM and collective
pitch that allow you to transition from forward flight
to hover with smooth, solid control. You can even
use negative pitch for aerobatics like loops, rolls
and inverted flying. The Blade CP+ also includes
a number of new features and accessories that
further enhance its flight performance for low-time
and experienced pilots alike.
No other micro-sized RTF provides this much control
and aerobatic potential at a price so affordable.
10
EFLH1105 Specifications
HELI
Main Rotor Diameter: 20.8 in (528mm)
Length: 20.7 in (526mm)
Weight with Battery: 10.5 oz (298 g)
Motors: 370 main, N30 tail (installed)
Battery: 3S 11.1V 800mAh Li-Po (included)
Transmitter: FM 6-channel with CCPM (included)
On-Board Electronics: FM 6-channel receiver plus
3-in-1 mixer/ESC/gyro (installed)
Servos: 7.5-gram S75 sub-micro (3 installed)
Recommended Optional Parts
EFLB0995 3S 11.1V 800mAh Li-Po, JST
EFLH1000 Micro/Mini Helicopter Pitch Gauge
EFLH1122C Carbon Fiber Tail Rotor Blade
EFLH1147CSymmetrical Carbon Fiber Main Rotor Blade Set
EFLH1169 Crash Kit: BCP
EFLH1170 Bell Mixer Upgrade Kit: BCP
EFLH1175 Aluminum Swashplate Set
EFLRG90HL9.0-gram G90 Sub-Micro Heading Lock Gyro
For even more precise performance, upgrade your Blade
CP+ with the optional Carbon Fiber Tail Rotor Blade
(EFLH1122C), Symmetrical Carbon Fiber Main Rotor Blades
(EFLH1147C), or both.
No assembly is required. Everything you need to fly
right from the box is included or installed, including: a
6-channel FM radio system with servo reversing and
CCPM mixing, 370 main motor, servos, mixer, ESCs,
gyro, receiver, Li-Po battery pack, Li-Po balancing
charger and more. Plus, at no extra charge, you get
an optional-use training gear set, and a set of wooden
symmetrical main blades that you can install later when
you’re ready to try inverted flight.
www.E-fliteRC.com
11
BLADE CP PRO RTF
BLADE CP PRO RTF
Intermediate and experienced pilots looking for
instant micro-heli aerobatic gratification need to
look no further than E-flite’s Blade™ CP Pro. Based on
the tried and true Blade CP platform, the Pro adds
the lightweight power of a 3S 11.1V 800mAh Li-Po
battery, the lightning quick cyclic response of BellHiller mixing, and the upright or inverted agility of
symmetrical main rotor blades. Plus, it can easily
be outfitted with brushless power and a heading
lock gyro, without the need for a new radio system
or difficult modifications.
For red hot micro-heli aerobatics in the time it takes
you to charge a battery pack, nothing can touch the
cutting-edge Blade CP Pro.
12
EFLH1300 Specifications
HELI
Main Rotor Diameter: 20.3 in (515mm)
Length: 20.7 in (526mm)
Weight with Battery: 10.5 oz (298 g)
Motors: 370 main, N30 tail (installed)
Battery: 3S 11.1V 800mAh Li-Po (included)
Transmitter: FM 6-channel with CCPM Mixing (included)
On-Board Electronics: FM 6-channel receiver plus
3-in-1 mixer/ESC/gyro (installed)
Servos: 7
.5-gram S75 sub-micro (3 installed)
Recommended Optional Parts
EFLB0995 3S 11.1V 800mAh Li-Po Pack
EFLH1000 Micro/Mini Helicopter Pitch Gauge
EFLH1122C Carbon Fiber Tail Rotor Blade
EFLH1144 Head Dampening Shim (8)
EFLH1147CSymmetrical CF Main Rotor Blade Set
EFLH1175 Aluminum Swashplate Set
EFLRG90HL 9.0-gram G90 Sub-Micro Heading Lock Gyro
The Blade CP Pro’s separate 6-channel
FM receiver, plus 3-in-1 control unit
with main motor and tail motor ESCs,
mixer, and gyro, provide the kind of
precise control that lets you fly aerobatics with confidence. Plus, this
unique control system is plug-andplay compatible with brushless power
systems and heading lock gyros so
when you’re ready to expand the flight
envelope even further, you can just
plug in the new equipment and fly.
The main rotor blades are driven by
a powerful 370 motor with a 9-tooth
pinion that has been optimized for use
with 3-cell Li-Po battery packs. Both
the main and tail motors are equipped
with heat sinks that help keep things
cool during aggressive aerobatics and
prolong motor life.
The Blade CP Pro comes out of the box
with a high-performance Bell-Hiller
mixing equipped rotor head and symmetrical main rotor blades that let
experienced pilots fly advanced aerobatic maneuvers, including inverted
flight, right out of the box.
www.E-fliteRC.com
13
BLADE 400 3D RTF
BLADE 400 3D RTF
The Blade 400 3D will give intermediate to
advanced heli pilots a ready-to-fly experience like no
other. It comes out of the box 100% factory built and
equipped with state-of-the-art features like brushless
power, digital servos, a heading lock gyro, CCPM control and symmetrical blades. It’s also big enough that
you can fly outdoors in breezier conditions that would
ground smaller micro-helis. Plus, it’s equipped with a
Spektrum DX6i computer programmable transmitter
with full-range capabilities, 10-model memory and
helicopter and airplane programming so you’ll have a
transmitter that’s perfect for the Blade 400 and just
about any other model too.
™
And because the Blade 400 is flight tested at the factory, no difficult pre-flight setup is required, so it’s
ready for everything from smooth hovering to 3D aerobatic flying as soon as you finish charging the battery.
14
EFLH1400 Specifications
HELI
Main Rotor Diameter: 28.2 in (718mm)
Length: 25.6 in (650mm)
Weight with Battery: 23.5 oz (665 g)
Motor: 420H brushless outrunner, 3800Kv (installed)
Battery: 3S 11.1V 1800mAh 20C Li-Po (included)
Transmitter: Spektrum DX6i 2.4GHz DSM2
6-channel computer radio (included)
Servos: 7.5-gram DS75 digital sub-micro (4 installed)
Gyro: 11.0-gram G110 micro heading lock gyro (installed)
Recommended Optional Parts
EFLB18003S 3S 11.1V 1800mAh 20C LiPo, 13GA EC3
EFLC4025 100–240V AC to 12V DC, 2.5 Amp Power Supply
EFLH1415C 325mm Carbon Fiber Main Rotor Blade Set: B400
EFLH1471C Tail Rotor Blade Set, Carbon Fiber: B400
EFLH1472C Stabilizer/Fin Set, Carbon Fiber: B400
The Blade 400 3D is equipped with
CCPM (Cyclic Collective Pitch Mixing)
control that features direct-to-swash
aileron/pitch linkages and a push-pull
elevator setup so you can perform 3D
maneuvers with smooth, solid control.
Customize your Blade 400 with
these optional canopy and fin sets,
sold separately. The white canopy
(EFLH1480) and fin set (EFLH1472W)
let you paint or decal any trim scheme
you can dream up. A factory-finished
flame canopy (EFLH1483), blue fin set
(EFLH1472B) and decal sheet
(EFLH1484) are also available.
The Blade 400 3D is the first readyto-fly mini-heli to come equipped with
Spektrum’s advanced DX6i 2.4GHz
DSM2™ 6-channel programmable
aircraft system. Besides providing
freedom from frequency restrictions and interference, the DX6i’s
DSM2 technology offers other unique
advantages like faster control
response and innovative features such
as ServoSync ™. ServoSync automatically resequences transmitted data so
mixed servos receive their pulses at
the same time so you can fly extreme
3D aerobatics with absolute precision.
The system also includes the featherlight, 4.4-gram Spektrum AR6100e
Microlite Receiver.
www.E-fliteRC.com
15
G90 Sub-Micro Heading Lock Gyro
At just 9 grams, the full-featured G90 Sub-Micro Heading
Lock Gyro gives micro and mini helicopter pilots all the benefits of locked-in tail control, as well as the ability to optimize
its performance for use with digital or analog servos.
HELICOPTER
ACCESSORIES
EFLRG90HL Specifications
Size: 0.8 x 0.6 x 0.8 in (20 x 15 x 20mm)
Weight: .32 oz (9.0 g)
Voltage: 4.2–8.0V
EFLH1415C
EFLH1232
EFLH1314
EFLH1260
EFLH1472C
EFLH1471C
Heli Accessories
Heli Accessories
Blade CX and Blade CX2 Optional Parts and Accessories
EFLA261
EFLH1205
EFLH1208
EFLH1229
EFLH1232
EFLH1240
EFLH1241
EFLH1244
EFLH1245
EFLH1246
EFLH1257
EFLH1260
EFLH1262
EFLA261
Micro/Mini Heli Tool Assortment, 6 pieces
Training Gear Set: BCX, BCX2
Main Motor Heat Sink: BCX, BCX2
Complete Body Set, Yellow: BCX, BCX2
Complete Body Set, Police, Blue: BCX, BCX2
Inner Shaft with Aluminum Head/Hub: BCX, BCX2
Inner Shaft for Aluminum Head/Hub: BCX, BCX2
Aluminum Bearing Holder with Bearing: BCX, BCX2
Aluminum Lower Rotor Head Set: BCX, BCX2
Aluminum Swashplate Set: BCX, BCX2
Complete Body Set, Red: BCX, BCX2
Complete Body Set, Marines with Decal/Gun/Missile: BCX, BCX2
Gun and Missile Set: BCX, BCX2
JST Female/2 JST Male Parallel Y-Harness
20-Amp Brushless ESC
Park 370 Brushless Inrunner Motor, 4100Kv
Heat Sink, 20x20mm
Pinion Gear, 8T 0.5 Module 2mm ID
3” Y-Harness, Lightweight
EFLH1205
EFLH1245
Blade CP+ and Blade CP Pro Optional Parts and Accessories
EFLA261
EFLC4000
EFLH1000
EFLH1049
EFLH1017
FM Crystal Set Channel 19, 72.170: BCP+, BCPP, BCX
FM Crystal Set Channel 21, 72.210: BCP+, BCPP, BCX
FM Crystal Set Channel 50, 72.790: BCP+, BCPP, BCX
FM Crystal Set Channel 52, 72.830: BCP+, BCPP, BCX
FM Crystal Set Channel 54, 72.870: BCP+, BCPP, BCX
Carbon Fiber Tail Rotor Blade: BCP+, BCPP
Head Dampening Shim (8): BCP+, BCPP
Symmetrical Carbon Fiber Main Rotor Blade Set: BCP+, BCPP
Crash Kit: BCP+
Bell Mixer Upgrade Kit: BCP+
EFLH1147C
Aluminum Swashplate Set: BCP+, BCPP
Body/Canopy, Yellow with Decals: BCPP
Body/Canopy, White without Decals: BCP+, BCPP
9.0-Gram Sub-Micro G90 Heading Lock Gyro
EFLH1122C
Blade 400 3D Optional Parts and Acessories
Blade CP+ and Blade CP Pro Optional Brushless Main Motor Power System
EFL228
EFLA311B
EFLM1000
EFLM1912
EFLM1949
EFLRYH3
EFLH1019
EFLH1021
EFLH1050
EFLH1052
EFLH1054
EFLH1122C
EFLH1144
EFLH1147C
EFLH1169
EFLH1170
EFLH1175
EFLH1313
EFLH1314
EFLRG90HL
Micro/Mini Heli Tool Assortment, 6 pieces
100-240V AC to 12VDC, 1.5 Amp Power Supply
Micro/Mini Helicopter Pitch Gauge
Trainer Cord: BCP+, BCPP
FM Crystal Set Channel 17, 72.130: BCP+, BCPP, BCX
EFLC4025
EFLH1001
EFLH1409
EFLH1411
EFLH1415C
EFLH1471C
EFLH1472B
EFLH1472C
EFLH1472W
EFLH1480
EFLH1483
EFLH1484
100-240V AC to 12V DC, 2.5 Amp Power Supply
Mini Helicopter Main Blade Holder: B400
Pinion Gear, 9T 0.5M: B400
Pinion Gear, 11T 0.5M: B400
325mm Carbon Fiber Main Rotor Blade Set: B400
Tail Rotor Blade Set, Carbon Fiber: B400
Stabilizer/Fin Set, Blue: B400
Stabilizer/Fin Set, Carbon Fiber: B400
Stabilizer/Fin Set, White: B400
Body/Canopy, White w/o Decals
Body/Canopy, Flame w/Decals: B400
Decal Sheet, Flame: B400
EFLH1175
EFLH1000
16
www.E-fliteRC.com
17
HELICOPTER
REPLACEMENT PARTS
Blade CP+ and Blade CP Pro Replacement Parts
EFLH1222
EFLH1221
Heli Replacement Parts
EFLH1145
Blade CX and Blade CX2 Replacement Parts
EFLB0990
EFLC3105
EFLH1022
EFLH1024
EFLH1025
EFLH1040
EFLH1045
EFLH1055
EFLH1058
EFLH1059
EFLH1209
EFLH1210
EFLH1211
EFLH1213
EFLH1214
EFLH1215
EFLH1216
EFLH1217
EFLH1218
EFLH1219
EFLH1220
EFLH1221
EFLH1222
EFLH1223
EFLH1224
EFLH1225
EFLH1226
EFLH1227
EFLH1228
EFLH1230
EFLH1231
EFLH1242
EFLH1243
EFLH1254
2S 7.4V 800mAh Li-Po, JST/Balance
2-3S Cell 7.4–11.1V Li-Po Balancing Charger, 0.65A
Bind Plug: BCX2
4-in-1 Control Unit, RX/ESC/Mixer/Gyro 2.4GHz: BCX2
4-in-1 RX/ESC/Mixer/Gyro FM 72MHz: BCX
EFLB0990
4-Channel Transmitter, FM 72MHz: BCX
Transmitter Antenna: BCP+, BCPP, BCX
LP5DSM 5-Channel Transmitter, 2.4GHz: BCX2
Transmitter Antenna, 2.4GHz: BCX2
Trainer Cord: BCX2
Mounting Accessories & Screwdriver: BCX, BCX2
180 Motor with 8T 0.5M Pinion Left: BCX, BCX2
180 Motor with 8T 0.5M Pinion Right: BCX, BCX2
Outer Shaft & Main Gear Set: BCX, BCX2
Shaft Retaining Collar Set: BCX, BCX2
Bearing 4x8x3mm (2): BCX, BCX2
EFLH1219
Swashplate Set: BCX, BCX2
Lower Rotor Head & Linkage Set: BCX, BCX2
Servo Pushrod Set: BCX, BCX2
Stabilizer Flybar Set: BCX, BCX2
Lower Main Blade Set (2 pr): BCX, BCX2
Upper Main Blade Set (2 pr): BCX, BCX2
Landing Skid Set: BCX, BCX2
Battery Support Set: BCX, BCX2
Main Frame Set: BCX, BCX2
EFLH1242
Hardware Set: BCX, BCX2
Body Mount Rod & Grommet Set: BCX, BCX2
Front Body/Canopy, Yellow: BCX, BCX2
Rear Body, Yellow: BCX, BCX2
EFLH1255 Front Body/Canopy: BCX, BCX2
Front Body/Canopy, Police: BCX, BCX2
EFLH1256 Rear Body: BCX, BCX2
Rear Body, Police: BCX, BCX2
EFLH1258 Front Body/Canopy, Marines without Decals: BCX, BCX2
Inner Shaft with Head/Hub: BCX, BCX2
EFLH1259 Rear Body, Marines without Decals: BCX, BCX2
Inner Shaft Main Gear: BCX, BCX2
EFLH1261 Decal Sheet, Marines: BCX, BCX2
Main Frame Set: BCX2
EFLB0995
EFLC3105
EFLH1031
EFLH1036
EFLH1044A
EFLH1045
EFLH1046
EFLH1110B
EFLH1111
EFLH1115
EFLH1118
EFLH1119
EFLH1120
EFLH1121
EFLH1122
EFLH1128
EFLH1129
EFLH1134
EFLH1135
EFLH1136
EFLH1143
EFLH1145
EFLH1146
EFLH1147A
EFLH1147B
EFLH1148
EFLH1149
EFLH1150
EFLH1151
EFLH1152
EFLH1153
EFLH1154
EFLH1155
EFLH1156
EFLH1157
EFLH1158
EFLH1159
EFLH1160
EFLH1161
EFLH1162B
EFLH1163
EFLH1164
EFLH1165
EFLH1166
EFLH1167
EFLH1171
EFLH1172
EFLH1311
EFLH1312
3-Cell 11.1V 800mAh Li-Po, JST/Balance
3-Cell 11.1V Li-Po Balancing Charger, 0.8A
3-in-1 Control Unit, Mixer/ESC/Gyro: BCP+, BCPP
6-Channel Micro Receiver FM 72MHz, Neg Shift: BCP+, BCPP
6-Channel CCPM Transmitter, FM 72MHz: BCP+, BCPP
Transmitter Antenna: BCP+, BCPP, BCX
6-Channel CCPM Pro Transmitter FM 72MHz: BCPP
370 Motor with 9T 0.5M Pinion: BCP+, BCPP
Decal Sheet: BCP+, BCPP
Bearing 3x6x2.5mm (2): BCP+, BCPP
Vertical Tail Support: BCP+, BCPP
Tail Motor with 8T 0.5M Pinion: BCP+, BCPP
Tail Rotor Drive Gear & Shaft Set: BCP+, BCPP
Bearing 2x6x3mm (2): BCP+, BCPP, BCX/2
Tail Rotor Blade: BCP+, BCPP
Training Gear Set: BCP+, BCPP
Mounting Accessories & Wrench: BCP+, BCPP
Main & Tail Motor Wire Set: BCP+, BCPP
Retaining Pin (6): BCP+, BCPP
Canopy Mount Rod & Grommet Set: BCP+, BCPP
Spindle: BCP+, BCPP
Center Hub & Spindle Set: BCP+, BCPP
Rotor Head Set: BCP+, BCPP
Flat Bottom Main Blade Set: BCP+, BCPP
Symmetrical Main Blade Set: BCP+, BCPP
Paddle Control Frame: BCP+, BCPP
Flybar (2): BCP+, BCPP
Paddle Set: BCP+, BCPP
Pitch Control Link Set: BCP+, BCPP
Swashplate Set: BCP+, BCPP
Servo Pushrod Set: BCP+, BCPP
Battery Support Set: BCP+, BCPP
Main Shaft & Drive Gear: BCP+, BCPP
Landing Skid Set: BCP+, BCPP
Body/Canopy: BCP+, BCPP
O-Ring & Tubing Set: BCP+, BCPP
Hardware Set: BCP+, BCPP
Tail Boom: BCP+, BCPP
Tail Rotor Gearbox Housing: BCP+, BCPP
Main Blade Grip Set, 3BB: BCP+, BCPP
Paddle Control Frame Pushrod Set: BCP+, BCPP
Main Shaft Retaining Collar: BCP+, BCPP
Flybar Weight (2): BCP+, BCPP
Main Frame Assembly: BCP+, BCPP
Main Frame: BCP+, BCPP
Bell Mixer Main Blade Grip Set: BCP+, BCPP
Bell Mixer Arm & Pushrod Set: BCP+, BCPP
Decal Sheet: BCPP
Body/Canopy, Silver with Decals: BCP
EFLB0995
EFLH1145
EFLH1155
EFLH1171
HELICOPTER
REPLACEMENT PARTS
Blade 400 3D Replacement Parts
EFLB18003S 20C 1800mAh 3S 11.1V Li-Po, 13GA EC3
EFLC3115 3S 11.1V Li-Po Balancing Charger, 1.8A
EFLA325H 25-Amp Helicopter Brushless ESC
EFLM1350H 420 Brushless Helicopter Motor, 3800Kv
EFLH1410 Pinion Gear, 10T 0.5M: B400
EFLH1415A 325mm Wood Main Rotor Blade Set, White: B400
EFLH1416 Main Rotor Blade Mounting Screw and Nut Set: B400
EFLH1417 Main Rotor Blade Grip/Holder Set: B400
EFLH1418 Bell Mixer Arm and Pushrod/Link Set: B400
EFLH1419 Bell Mixer Pushrod/Link (2): B400
EFLH1420 Thrust Bearing 3x8x3.5mm (2): B400
EFLH1421 Spindle/Feathering Shaft (2): B400
EFLH1422 Head Block/Rotor Housing Set: B400
EFLH1423 Flybar Seesaw Holder Set: B400
EFLH1424 Flybar Paddle Control Frame Set: B400
EFLH1425 Flybar, 220mm (2): B400
EFLH1427 Flybar Paddle Mounts/Adapters: B400
EFLH1428 Flybar Paddle Set for Mounts/Adapters: B400
EFLH1430 Washout Base: B400
EFLH1431 Washout Control Arm and Linkage Set: B400
EFLH1432 Washout Control Arm Link Set: B400
EFLH1433 Aluminum and Composite Swashplate: B400
EFLH1434 Anti-Rotation Bracket/Guide: B400
EFLH1435 Control/Linkage Ball, Long (4): B400
EFLH1436 Control/Linkage Ball, Short (10): B400
EFLH1437 Ball Link Set (20): B400
EFLH1438 Linkage Rod/Pushrod Set: B400
EFLH1439 Main Frame Set: B400
EFLH1440 Elevator Control Lever Set: B400
EFLH1441 Bearing 5x8x2.5mm (2): B400
EFLH1442 Bearing 5x10x4mm (2): B400
EFLH1443 Aluminum Motor Mount Set: B400
EFLH1444 Hook and Loop Battery Strap: B400
EFLH1445W Landing Gear Strut Set, White: B400
EFLH1446B Landing Gear Skid Set, Black: B400
EFLH1447 Main Shaft (2): B400
EFLH1448 Main Shaft Retaining Collar: B400
EFLH1449 One-Way Bearing Shaft and Shim Set: B400
EFLH1450 One-Way Bearing 6x10x12mm: B400
EFLH1451 Main Gear w/o One-Way Bearing: B400
EFLH1452 Main Gear w/One-Way Bearing: B400
EFLH1453 Main Tail Drive Gear: B400
EFLH1454 Tail Drive Shaft Lower Bearing Block/Mount: B400
EFLH1455 Tail Drive Gear/Pulley Assembly: B400
EFLH1456 Tail Drive Belt: B400
EFLH1457 Tail Boom (2): B400
EFLH1458 Tail Servo Boom Mount: B400
EFLH1459 Tail Linkage/Pushrod Set: B400
EFLH1422
EFLH1452
EFLH1456
EFLH1460
EFLH1461
EFLH1462
EFLH1463
EFLH1464
EFLH1465
EFLH1466
EFLH1467
EFLH1468
EFLH1469
EFLH1470
EFLH1471
EFLH1472Y
EFLH1473
EFLH1476
EFLH1479
EFLH1481
EFLH1482
Tail Pushrod Support/Guide Set: B400
Tail Boom Brace/Support Set: B400
Horizontal Stabilizer/Fin Mount: B400
Tail Case Set: B400
Tail Drive Belt Guide Pulley/Tensioner: B400
Tail Rotor Shaft and Drive Pulley (2): B400
Bearing 2x5x2.5mm (2): B400
Tail Rotor Pitch Lever Set: B400
Tail Rotor Pitch Control Slider Set: B400
Aluminum Tail Rotor Hub Set: B400
Tail Rotor Blade Grip/Holder Set: B400
Tail Rotor Blade Set: B400
Stabilizer/Fin Set, Yellow: B400
Complete Hardware Set: B400
Servo Arm Set, DS75: B400
Canopy Mount Rod & Grommet Set: B400
Body/Canopy, Tribal w/Decals: B400
Decal Sheet, Tribal: B400
EFLH1463
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising