Get the future. Today.
The Future is
JULY - SEPTEMBER 2012
4
4
4
4
Get the future. Today.
4
18V Slide Li-ion Range
4
18V Slide Reciprocating Saw
CR18DSL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
• Blade Can Be Loaded In Upward Or Downward
Direction
• Tool-less Blade Change
• Lightweight At 1.8kg
• Safety Overload Circuit And Anti-Start Safety
Override When Replacing Batteries
599
539
$
Ultra high capacity 4.0Ah
batteries provide 33%
longer run time increasing
productivity and less
down time.
Same size as 3.0Ah
batteries but
greater capacity.
$
Also available: ‘Naked’ CR18DSL(H4) $259
18V Slide Circular Saw C18DSL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
• 165mm Blade With Cutting Capacity Up To 57mm
• Electric Brake And Magnesium Blade Cover
Also available: ‘Naked’ G18DSL(H4) $159
AM/FM Radio
UR18DSL(H4)
Includes AC Adaptor
• Compatible With All Hitachi 9.6V - 18V Slide &
Cassette Batteries (Excluding 10.8/12V Peak)
• Compatible With iPod, MP3 And CD Players
169
599
$
$
Heat Sensor
18V Slide 115mm Angle Grinder G18DSL
Also available: ‘Naked’ C18DSL(H4) $259
* Only Available Naked
18V Slide Jigsaw
18V Slide Rotary Hammer Drill DH18DSL
CJ18DSL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
• Three Mode Orbital Action Or Straight Cut
• Tool-less Blade Change
• SDS Plus Chuck With 16mm Max Drilling Capacity
• Two Mode Action: Hammer Drilling / Drilling
Multiple Protection
Circuit
Standard with all brushless models
599
599
$
$
Also available: ‘Naked’ CJ18DSL(H4) $259
18V Slide Wet & Dry Vacuum R18DSL(H4)
Batteries & Charger Sold Separately
• Capable of Approx. 29mins Continuous Run Time
When Using 3.0Ah Battery
• Semi Transparent Dust Case
Also available: ‘Naked’ DH18DSL(H4) $259
18V Slide Blower & Vacuum RB18DSL(H4)
Batteries & Charger Sold Separately
• Capable of Approx. 19mins Continuous Run
Time When Using 3.0Ah Battery
• Can Be Converted To Vacuum With Optional
Accessory: Dustbag 323587
89
109
$
* Only Available Naked
$
* Only Available Naked
Get the future. Today.
18V Slide Li-ion Range
18V Slide Impact (Hammer) Driver Drill
DV18DSFL
18V Slide Impact (Hammer) Driver Drill
18V Slide Impact (Hammer) Driver Drill DV18DBL
DV18DSL
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger
and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
Includes 2 x 4.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
• 13mm Keyless Chuck
• 2 Speed Gearbox With All Metal Gears
• 13mm Single Sleeve Metal Keyless Chuck With
Automatic Spindle Lock
• 2 Speed Gearbox With All Metal Gears
• 30% More Efficient Hitachi Brushless Motor
• 4 Stage Speed Selector And Electronic Switch 50% Less Trigger Force Required
619
499
299
$
$
$
Also available: 'Naked' DV18DSFL(H4) $149
Also available: 'Naked' DV18DSL(H4) $259
Also available: ‘Naked’ DV18DBL(H4) $279
18V Slide Driver Drill
18V Slide Driver Drill
18V Slide Driver Drill
DS18DSFL
DS18DSL
DS18DBL
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger
and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
Includes 2 x 4.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
• 13mm Keyless Chuck
• 2 Speed Gearbox With All Metal Gears
• 13mm Single Sleeve Metal Keyless Chuck With
Automatic Spindle Lock
• 2 Speed Gearbox With All Metal Gears
• 30% More Efficient Hitachi Brushless Motor
• 4 Stage Speed Selector And Electronic
Switch - 50% Less Trigger Force Required
279
$
Also available: 'Naked' DS18DSFL(H4) $139
18V Slide Impact Driver
WH18DSL
479
599
$
$
Also available: ‘Naked’ DS18DBL(H4) $269
Also available: 'Naked' DS18DSL(H4) $249
18V Slide Impact Driver
WH18DBDL
18V Slide Electronic Pulse Driver
WM18DBL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
Includes 2 x 4.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
Includes 2 x 4.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
• 145Nm Tightening Torque
• Two Power Mode: Save Mode For Small Bit or
Power Mode for Larger Bit
• 165Nm Tightening Torque
• 30% More Efficient Hitachi Brushless Motor
• 30% More Efficient Hitachi Brushless Motor
• 5 Operation Modes - Easily Select The Right
Function For The Right Job
589
549
Also available: ‘Naked’ WH18DSL(H4) $199
18V Slide Impact Driver
999
$
$
WH18DSAL
$
Also available: ‘Naked’ WH18DBDL(H4) $229
Also available: ‘Naked’ WM18DBL(H4) $679
18V Slide Impact Wrench 18V Slide High Torque Impact Wrench WR18DBDL
WR18DSHL
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger
and Carry Case
Includes 2 x 4.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
• 145Nm Tightening Torque
• Lightweight At 1.5kg
• 250Nm Tightening Torque
• 30% More Efficient Hitachi Brushless Motor
• 480Nm Tightening Torque
• Forward & Reverse Rocker Switch
369
$
Also available: ‘Naked’ WH18DSAL(H4) $159
589
799
$
$
Also available: ‘Naked’ WR18DBDL(H4) $229
Also available: ‘Naked’ WR18DSHL(H4) $349
4
4
4
4
18V Cassette Li-ion Range
18V Cassette 115mm Angle Grinder G18DL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
• Lightweight At 1.9kg
• Safety Overload Circuit And Anti-Start Safety
Override When Replacing Batteries
539
18V Cassette Wet & Dry Vacuum
R18DL(H4)
Batteries & Charger Sold Separately
• Capable of Approx. 29mins Continuous Run
Time When Using 3.0Ah Battery
• Semi Transparent Dust Case
89
$
$
Hitachi Li-ion batteries have a
multiple protection circuit fitted
that monitors every cell in the
battery.
Also available: ‘Naked’ G18DL(H4) $159
This protects the battery and
tool by providing overload
protection which stops the tool
instantly in the event of a jam or
overload. It gives over charge
and over discharge protection
which ensures the battery life is
extended.
* Only Available Naked
AM/FM Radio (Slide & Cassette) UR18DSL
18V Cassette Blower & Vacuum RB18DL(H4)
Includes AC Adaptor
Batteries & Charger Sold Separately
• Compatible With All Hitachi 9.6V - 18V Slide &
Cassette Batteries (Excluding 10.8/12V Peak)
• Compatible With iPod, MP3 And CD Players
• Capable of Approx. 19mins Continuous Run
Time When Using 3.0Ah Battery
• Can Be Converted To Vacuum With Optional
Accessory: Dustbag 323587
169
109
$
$
* Only Available Naked
* Only Available Naked
Other Cordless
36V Rotary Hammer Drill
DH36DAL
Includes 2 x 2.6Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Multiple Protection
Circuit
Heat Sensor
• SDS Plus Chuck With 26mm Max Drilling Capacity
• Three Mode Action: Hammer Drilling / Drilling / Chiseling
• Power Save Mode: Power mode - For larger bits, Save mode - For smaller bits
999
$
12V Driver Drill
DS12DVC
Includes 2 x 1.2Ah Ni-Cd Batteries, Charger and Carry
Case
• Lightweight At 1.3kg
• 2 Speed Gearbox With All Metal Gears
139
$
18V Driver Drill Kit
DS18DVF3
Includes 2 x 1.5Ah Ni-Cd Batteries, Charger and Carry
Case
• 13mm Keyless Chuck
• 2 Speed Gearbox With All Metal Gears
219
$
Get the future. Today.
18V Cassette Li-ion Range
18V Cassette Rotary Hammer Drill
DH18DL
18V Cassette Impact (Hammer) Driver Drill DV18DFL
18V Cassette Impact (Hammer) Driver Drill DV18DL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger
and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
• SDS Plus Chuck With 16mm Max Drilling Capacity
• Two Mode Action: Hammer Drilling / Drilling
• 13mm Keyless Chuck
• 2 Speed Gearbox With All Metal Gears
• 13mm Single Sleeve Metal Keyless Chuck With
Automatic Spindle Lock
• 2 Speed Gearbox With All Metal Gears
599
299
$
579
$
$
Also available: ‘Naked’ DH18DL(H4) $259
Also available: ‘Naked’ DV18DFL(H4) $149
Also available: ‘Naked’ DV18DL(H4) $259
18V Cassette Circular Saw
18V Cassette Driver Drill 18V Cassette Driver Drill C18DL
DS18DFL
DS18DL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger
and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
• 165mm Blade With Cutting Capacity Up To 57mm
• Electric Brake And Magnesium Blade Cover
• 13mm Single Sleeve Keyless Chuck
• 2 Speed Gearbox With All Metal Gears
• 13mm Single Sleeve Metal Keyless Chuck With
Automatic Spindle Lock
• 2 Speed Gearbox With All Metal Gears
599
279
$
559
$
Also available: ‘Naked’ C18DL(H4) $259
$
Also available: ‘Naked’ DS18DFL(H4) $139
Also available: ‘Naked’ DS18DL(H4) $249
18V Cassette Reciprocating Saw CR18DL
18V Cassette Impact Driver
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger
and Carry Case
• 130Nm Tightening Torque
• Lightweight At 1.5kg
• Blade Can Be Loaded In Upward Or Downward
Direction
• Tool-less Blade Change
WH18DFL
18V Cassette Impact Driver
WH18DL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
• 150Nm Tightening Torque
• Two Power Mode: Save Mode For Small Bit or
Power Mode for Larger Bit
369
549
$
$
599
$
Also available: ‘Naked’ CR18DL(H4) $259
18V Cassette Jigsaw
CJ18DL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
• Three Mode Orbital Action Or Straight Cut
• Tool-less Blade Change
599
$
Also available: ‘Naked’ CJ18DL(H4) $259
Also available: ‘Naked’ WH18DFL(H4) $159
18V Cassette Impact Wrench
Also available: ‘Naked’ WH18DL(H4) $199
WR18DL
18V Cassette High Torque Impact Wrench
Batteries & Charger Sold Separately
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling
Charger and Carry Case
• 480Nm Tightening Torque
• Forward & Reverse Rocker Switch
• 220Nm Tightening Torque
• Two Power Mode: Save Mode For Small Bit or
Power Mode for Larger Bit
549
349
$
$
Also available: ‘Naked’ WR18DL(H4) $199
4
4
* Only Available Naked
4
4
WR18DHL(H4)
18V Cordless OPE Products
4
Hitachi's brushless motors
provide higher capacity
specifications compared
to conventional brushed
motors due to no
loss of power from friction
& sparking
18v Slide Grass Trimmer
Lighter, Quieter, Smarter
Includes 1 x 4.0Ah Li-ion Battery with MPC and
Charger
Introducing the new Hitachi 18V grass
trimmer - featuring Hitachi's unique
disc motor.
• Hitachi's Unique Efficient Disc Motor
• 38V Boost Circuit Increases Power Under Load
The unique disc motor is located on top
of the trimming head. As it rotates the
trimming head directly there is no need
for a drive shaft which results in:
499
$
• Low Noise
• Low Vibrations
• Low Weight
• Higher Efficiency
Also available: ‘Naked’ CG18DSDL(H4) $349
18V Slide Hedge Trimmer
CH18DSL
18V Cassette Hedge Trimmer
CH18DL
Includes 1 x 1.5Ah Li-ion Battery with MPC and
Charger
Includes 1 x 1.5Ah Li-ion Battery with MPC and
Charger
• 520mm Bar With Dual Action Cutting Teeth
• 15mm Cutting Capacity
• 520mm Bar With Dual Action Cutting Teeth
• 15mm Cutting Capacity
279
279
$
$
Standard with all brushless models
CG18DSDL
Also available: ‘Naked’ CH18DSL(H4) $149
Also available: ‘Naked’ CH18DL(H4) $149
Pneumatics
Framing Nailer
NR90AD
• Fires 50 - 90mm 34° Framing Nails
• Sequential & Bump Fire Trigger
• Tool-less Depth Dial
• Industrial Strength Top Housing
DA Finish Nailer
NT65MA4
• Fires 32 - 65mm DA Series Finish Nails
• Sequential & Bump Fire Trigger
• Tool-less Depth Dial
• Integrated Air Duster
579
$
429
$
Get the future. Today.
18V Brushless PACKS slide
18V Li-ion Combination Pack
Power Pack 5 - 4.0Ah
4
2 Piece Brushless Pack Includes:
DV18DBL Impact (Hammer)
Driver Drill, WH18DBDL Impact
Driver, 2 x 4.0Ah Li-ion Slide
Batteries With MPC, UC18YRSL
Cooling Charger And Carry Case
729
$
When combined with 4.0Ah
batteries, brushless motors
significantly increase
runtime efficiency.
Also available:
Power Pack 7
2 Piece Brushless Pack includes:
DS18DBL Driver Drill,
WH18DBDL Impact Driver,
2 x 4.0Ah Li-ion Slide Batteries
with MPC, UC18YRSL Cooling
Charger and Carry Case $699
18V Li-ion Combination Pack
The brushless motors are
also smaller in size making
the tools more compact
and lightweight.
Power Pack 6 - 4.0Ah
Standard with all brushless models
2 Piece Brushless Pack Includes:
DV18DBL Impact (Hammer)
Driver Drill, WR18DBDL Impact
Wrench, 2 x 4.0Ah Li-ion Slide
Batteries With MPC, UC18YRSL
Cooling Charger And Carry Case
729
$
Also available:
Power Pack 8
2 Piece Brushless Pack includes:
DS18DBL Driver Drill,
WR18DBDL Impact Wrench,
2 x 4.0Ah Li-ion Slide Batteries
with MPC, UC18YRSL Cooling
Charger and Carry Case $699
Pneumatics
C Series Brad Nailer
NT65M2
• Fires 25 - 65mm C Series Brad Nails
• Sequential & Bump Fire Trigger
• Tool-less Depth Dial
• Integrated Air Duster
C1 Series Brad Nailer
NT50AE2
Narrow Crown Stapler
• Fires 15 - 50mm C1 Series Brad Nails
• Sequential & Bump Fire Trigger
• Tool-less Depth Dial
• Fires 13 - 38mm 6000 Series Narrow
Crown Staples
• Sequential & Bump Fire Trigger
• Tool-less Depth Dial
Also available:
15 - 32mm C1 Series Brad Nailer
NT32AE2 $169
319
219
$
179
$
4
4
N3804AB3
4
$
4
Drilling
C12RSH
Slide Compound
Saw with Laser
Suitable for carpentry,
joinery, cabinetmaking
and other timber and
non-ferrous fabrication
Featuring:
• Linear ball bearing slide
13mm Impact Drill
DV13VSS
• 550W Motor
• 13mm Keyless Chuck
• Reversible With Variable Speed
and bevel scale
DV20VB2
• 730W Motor
• 2 Speed Gearbox
• Variable Speed With Reverse
• 13mm Keyed Chuck
109
299
$
$
Also available:
16mm Impact Drill DV16VSS $119
130mm Reciprocating Saw
CR13VBY
• 1150W Motor
• Tool-less Blade Change With 2 Mode Cutting Action
• Lightweight 4.4Kg
system
• Positive stops on mitre
20mm Impact Drill
469
$
Drill With Safety Clutch D13VB3
• 790W Motor
• 2 Speed Gearbox
• 13mm Keyless Chuck
• 40mm Wood Capacity
• Variable Speed With Reverse
399
$
• High sub fences
• Quick change depth
adjustment
• Laser marker
• Zero clearance rail system
12mm Variable Speed Router
M12VE
• 2000W Motor
• 3 Way Adjustable Handle
• Lightweight 5.3Kg
M6SB
• 400W Motor
• Fine Rack & Pinion Height Adjustment With 45º
Adjustable Base
• Lightweight 1.4Kg
• Micro adjustment for mitre
& bevel
6.35mm Trimmer 449
339
$
$
Also available: M12SE $339
18mm Impact Drill
• 690W Motor
• 13mm Keyless Chuck
• Variable Speed With Reverse
229
$
DV18V
10mm Drill
D10VC2
• 460W Motor
• 10mm Keyless Chuck
• Variable Speed With Reverse
109
$
Get the future. Today.
Wood Work
305mm Slide Compound Saw with Laser C12RSH
216mm Slide Compound Saw • 1520W Motor
• 107 x 312mm Cutting Capacity
• Zero Clearance Slide Structure
• 1050W Motor
• 75 x 262mm Cutting Capacity
• Positive Mitre Stops
999
C8FSE
255mm Compound Mitre Saw C10FCE2
• 1520W Motor
• 89 x 101mm Cutting Capacity
• Positive Mitre Stops
849
$
399
$
$
Also available: 305mm Slide Compound
Saw with Laser Marker and Digital Readout
C12LSH $1149
Also available: 216mm Slide Compound
Saw with Laser Marker & LED Light C8FSHE
$899
Also available: 255mm Compound Mitre
Saw with Laser Marker C10FCH2 $439
125mm Random Orbital Sander SV13YB
110mm D-Handle Jigsaw D Handle Jigsaw
• 230W Motor
• Lightweight At 1.4kg
• High Dust Collection
• 720W Motor, Variable Speed at 1.5kg
• Three Mode Orbital Action Or Straight Cut And
Tool-less Blade Change By Lever
149
CJ110MV
129
$
Also available: 125mm Variable Speed
Orbital Sander SV13YA $179
190mm Circular Saw
$
Also available: 110mm Barrel Handle
Jigsaw $309 CJ110MVA
C7MFA
185mm Circular Saw C7SB2-K
Includes 2 x 40T Blades
Includes 2 x Blades and Carry Case
• 1010W Motor
• Lightweight At 3.6kg
• Aluminium Base With 68mm Depth Of Cut
• 1710W Motor
• Lightweight At 4.6kg
• Aluminium Base With 60mm Depth Of Cut
159
• 1450W Motor
• 85 x 312mm Cutting Capacity
• V-belt overload protection
235mm Circular Saw 319
$
C10FSB
$
100mm Belt Sander SB10V2
1/3 Sheet Orbital Sander
• 1020W Motor
• Variable Speed Dial Control
• Lightweight at 5.2Kg
• Velcro Pad & Clamp System
• Includes Punch Plate & Dust Bag
• Lightweight At 1.3kg
519
$
899
$
4
C9SA2
• 2000W Motor
• Lightweight At 6.8kg
• Aluminium Base With 86mm Depth Of Cut
259
$
260mm Slide Compound Saw • 400W Motor
• Variable Speed
• Compact & Lightweight
309
$
FCJ65V3
119
$
4
4
4
FSV10SA
construction
G13YC2
Angle Grinder
Suitable for mining,
petroleum and
heavy engineering
industries
22mm 2 Mode Rotary Hammer DH22PG
• 620W Motor With 1.4 Joules Impact
• SDS Plus Chuck With 22mm Max Drilling Capacity
• Variable Speed With Reverse
229
• Paddle (Deadman) switch
Includes 1 x Chisel, 1 x Point and Case
• Overload protection
• 950W Motor With 9 Joules Impact
• SDS Max Chuck With 38mm Max. Drilling Capacity
• 12 Angle Chisel Position
$
16.5KG Demolition Hammer
• Anti-kickback
DH38MS
699
$
Featuring:
• Constant speed
38mm 2 Mode Rotary Hammer H65SB2
5.9KG Demolition Hammer H45MRY
• 950W Motor With 12.7 Joules Impact
• SDS Max Chuck
• 12 Angle Chisel Position
• 1400W Motor
• 42 Joules Impact Energy
• 30mm Hex Drive
1199
999
$
$
• Soft start
• Restart protection
• Anti-vibration side handle
• 1430W motor
• Lightweight at 2Kg
359
$
Shear
CE16SA
• 400W Motor
• Lightweight + Compact 1.7Kg
• 1.6mm Cutting Capacity
649
649
$
DH24PC3
• 800W Motor With 3.2 Joules Impact
• SDS Plus Chuck With 24mm Max Drilling Capacity
Variable Speed With Reverse
359
$
CN16SA
• 400W Motor
•1.6mm Cutting Capacity
• 3 Position Die Holder
• Lightweight 1.6Kg
$
24mm 3 Mode Rotary Hammer Nibbler 40mm 2 Mode Rotary Hammer DH40MRY
• 950W Motor With 10 Joules Impact
• SDS Max Chuck With 40mm Max Drilling Capacity
Variable Speed
1049
$
Get the future. Today.
Metal Work
100mm Angle Grinder Pack G10SR3-BP
125mm Angle Grinder G13YF
Pack Includes:
730W Angle Grinder With 3 x Cutting Wheels,
1 x Grinding Wheel, 1 x Diamond Wheel,
1 x Tape Measure & Carry Case
• 1430W Motor
• Soft Start, Constant Speed Control, Overload
Protection, Kick Back Protection, 0 Voltage Restart
• Tool-less Guard
99
$
125mm Angle Grinder G13SB3
• 1300W Motor
• Anti Vibration Side Handle
• Tool-less Guard
279
359
$
$
bonus
Also available: 125mm Angle Grinder Pack
G13SR3-BP $119
125mm Angle Grinder Cutting Pack
G13SR3-CWP
Pack Includes:
730W Angle Grinder With 10 x Cutting Wheels,
1 x Grinding Wheel, 1 x Tape Measure & Carry Case
1 x 125mm Diamond Wheel
180mm Sander Polisher
SAT180
100mm Angle Grinder With Paddle Switch
• 950W Motor
• Lightweight At 2.9kg
• 2 Speed Dust Sealed Unit
129
• 840W Motor
• 196mm Ultra Slim Grip Circumference
• Full Length Paddle Switch
119
359
$
$
$
Also available: 125mm Angle Grinder With
Paddle Switch G13SQ $139
Also available: 100mm Angle Grinder
Cutting Pack G10SR3-CWP $109
180mm Angle Grinder G18UBY
• 2400W Motor 5.1kg
• Soft Start, Vibration Absorbing Main and Side
Handle And Deadman Switch
349
• 2400W Motor
• Anti Vibration Side Handle
• Tool-less Guard
319
$
230mm Angle Grinder G23SE2
355mm Cut Off Machine
• 2400W Motor
• Anti Vibration Handle
• Tool-less Guard
• 2400W Motor
• Quick Change Vice
• Sturdy Aluminium Housing
• Spark Diversion Guard
• External Access To
Carbon Brushes
299
$
180mm Angle Grinder G10SQ
$
G18SE3
180mm Sander Polisher
125mm Variable Speed Angle Grinder G13VA
• 1430W Motor
• Soft Start, Constant Speed Control, Overload
Protection, Kick Back Protection, 0 Voltage Restart
• Tool-less Guard
399
• 1250W Motor 2.8kg
• Variable Speed And Soft Start
• Constant Speed Control
459
$
$
bonus
1 x 125mm Diamond Wheel
4
4
4
4
CC14SF
389
$
SP18VA
tools & Accessories
2 Piece Corded Combo Kit
PACK 234
Pack Contains:
• G10SR3-BP Angle Grinder Pack
• DV16VSS Impact Drill
• 717105 105 Piece Bit Set
• 2 x Carry Cases (Not Pictured)
• Site Bag
2 Piece Corded Combo Kit
PACK 240
Pack Contains:
• C10FCE2 Compound Mitre Saw
• FCJ65V3 D Handle Jigsaw
399
$
199
$
6 Piece SDS Chuck & Bit Set 751025
• 13mm key chuck and adaptor
• Includes - 5, 6 & 8mm x 110mm
- 6, 8 x 160mm
3 Piece Socket Adapter Set
1) ¼” Hex. Drive to 1/4” Square Drive
2) ¼” Hex. Drive to 3/8” Square Drive
3) ¼” Hex. Drive to 1/2” Square Drive
751970
41 Piece Socket Set
752500
Reciprocating Saw Blade Pack 752049
• Includes 10 Impact Sockets, 28 Hex. Driver Bits & 3
Adaptors
• Includes 12 Blades in a Roll Up Satchel
• Assortment of Timber and Metal Applications
Inox Discs
82mm TCT Planer Blades
• Suitable for Stainless Steel and Metal Cutting
Applications
• 797089 - 100 x 1mm • 752507 - 180 x 1.5mm
• 797090 - 115 x 1mm • 752508 - 230 x 1.9mm
• 797091 - 125 x 1mm
• 750470 - 2 x 82mm TCT Planer Blades
• 750471 - 10 x 82mm TCT Planer Blades
DISCLAIMER
Prices effective from the 01/07/2012 to 30/09/2012 unless stock is sold out. All prices include GST unless otherwise marked. Prices and products are current at the time of printing but are subject to change without notice.
Prices in this catalogue are a guide only, prices may vary from store to store. Accessories not included unless otherwise stated. Illustrations are for display purpose only. Not all items shown in this brochure are held in stock
by retailers at all times. Orders can be taken for product not held in stock at time of enquiry. Errors and Omissions Excepted (E&OE). Brochure prepared by Hitachi Power Tools Australia Pty Ltd ABN 27 072 677 153 for use by
participating retailers.
www.hitachi-powertools.com.au
Find Us On
Facebook
To contact Hitachi
Power Tools Australia
scan this QR code or
call 1300 4 HITACHI
Get the future. Today.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising