20130422 Ch2 RS-485 Remote IO Modules.indd
I-7000 and M-7000 Modules
 Features
 I-7060(D)/M-7060(D)
 2 Form A and 2 Form C Signal Relay Output
 ±2 kV EFT protection for Power Line
 M-7060P(D)
2
I-7060(D)
RS-485 Remote I/O Modules
3
 2 Form A and 2 Form C Power Relay Output
M-7060(D)
 ±4 kV EFT protection for Power Line
 ±3 kV Surge protection for Power Line
 Sink- and Source-type for Digital Input
 Digital Input Channels can be used as 16-bit Counters
 Configurable Power-on Value Settings
 Configurable Safe Value Settings
 Dual Watchdog
M-7060P
 Wide Operating Temperature Range: -25 ~ +75°C
M-7060PD
4-channel Isolated Digital Input and 4-channel Relay Output Module
 Introduction
The 7060 series provides 4 digital input channels, 2 Form A and 2 Form C signal relay output channels, while the M-7060P provides 4 digital input channels,
2 Form A and 2 Form C power relay output channels. All digital input channels can be used as 16-bit counters. In addition, the digital input channels can be
selected either as sink- or source-type via wire connections. The “D” versions of the 7060 series provide eight LED indicators that can be used to monitor the
status of the digital input and relay output. The “M” versions of the 7060 series support both the Modbus RTU and DCON protocols, which can be configured
via software. There are also options for configuring power-on and safe values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to
enhance noise protection capabilities in industrial environments. The 7060 series is the ideal solution for small signal switching applications, while the M-7060P
is the perfect solution for high power applications.
 Applications
 System Specifications
Model
• Building Automation
• Factory Automation
I-7060
M-7060
M-7060P
I-7060D
M-7060D
M-7060PD
Communication
RS-485 Modbus RTU, DCON
Format
(N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1)
Baud Rate
1200 ~ 115200 bps
Protocol
DCON
Dual Watchdog
Yes, Module (1.6 Seconds), Communication (Programmable)
Modbus RTU, DCON
I/O LED Indicators
7-Segment LED Display
-
-
-
I-7060/I-7060D/M-7060(D)/M-7060P(D)
83
ESD (IEC 61000-4-2)
4 (Form A × 2, Form C × 2)
Signal Relay
Power Relay
0.6 A @ 125 VAC
2 A @ 30 VDC
16A @ 250 VAC
10 A @ 30 VDC
Contact Rating
Form A
Relay
-
3750 VDC
Form C
Relay
±4 kV Contact for each Terminal
±8 kV Air for Random Point
EFT (IEC 61000-4-4)
±2 kV for Power Line
±4 kV for Power Line
Surge (IEC 61000-4-5)
-
±3 kV for Power Line
Min. Contact Load
10 uA @ 10 mV
100 mA @ 6 V
Contact Material
Gold-plated silver
Silver Tin Alloy
Operate Time
3 ms
10 ms
Release Time
2 ms
5 ms
Mechanical Endurance
1 x 108 ops.
1 x 107 ops.
Electrical Endurance
5 × 105 ops.
1 × 105 ops.
Contact Rating
0.6 A @ 125 VAC
2 A @ 30 VDC
NO:10 A @ 250 VAC
NC:6 A @ 250 VAC
Min. Contact Load
10 uA @ 10 mV
100 mA @ 6V
Contact Material
Gold-plated silver
Silver Tin Alloy
Operate Time
3 ms
10 ms
Release Time
2 ms
5 ms
Mechanical Endurance
1 x 108 ops.
1 x 107 ops.
Electrical Endurance
5 × 105 ops.
1 × 105 ops.
2500 VDC
Surge Strength
1500 VDC
Power-on Value
Yes
Reverse Polarity Protection Yes
Safe Value
Yes
Input Range
Digital Input/Counter
Power
Consumption
10 ~ 30 VDC
1W
1W
1.4 W
1.4 W
1.4 W
1.8 W
Channels
Type
Mechanical
Dimensions (W x L x H)
72 mm x 123 mm x 35 mm
Installation
DIN-Rail or Wall Mounting
Environment
Operating Temperature
4
Dry Contact
-
Wet Contact
Sink/Source
On Voltage Level
+1 VDC Max.
+4 VDC Max.
Off Voltage Level
+4 ~ 30 VDC
+10 ~50 VDC
Max. Count
Counters
-25 ~ +75°C
M-7060P
M-7060PD
Relay Type
Yes, 8 LEDs as Digital Input/Relay Output Indicators
EMS Protection
M-7060
I-7060D M-7060D
Channels
Isolation
Intra-module Isolation,
Field-to-Logic
I-7060
Relay Output
LED Indicators/Display
Yes, 1 LED as Power/Communication Indicator
• Remote Diagnosis
• Testing Equipment
 I/O Specifications
Model
Interface
System LED Indicator
• Machine Automation
• Remote Maintenance
65535 (16-bit)
Max. Input Frequency
100 Hz
Min. Pulse Width
5 ms
Storage Temperature
-40 ~ +85°C
Input Impedance
3 kΩ
10 kΩ
Humidity
10 ~ 95% RH, Non-condensing
Overvoltage Protection
±35 VDC
±70 VDC
ICP DAS CO., LTD
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Vol. RIO-RS-485 1.0.00 (2011.02.28)
Remote I/O Modules
 Internal I/O Structure
 Pin Assignments
I-7060(D)/M-7060(D)
LED
Module
DATA-
GND
+5 V
NO
RL1 COM
RL2 NO
RL3 NO
RL2 COM
RL3 NC
(B)GND 10
(R)+Vs
(G)DATA-
(Y)DATA+
INIT*
IN.COM
IN 0
IN 1
IN 2
RL2NO
RL3COM
RL3NC
RL3NO
RL4COM
RL4NC
RL4NO
RS-485
Interface
Power
Regulator
IN 3
RL1NO
RL2COM
M-7060P(D)
 Wire Connections
Digital Input/
Counter
ON State
Readback as 1
OFF State
Readback as 0
I-7060(D)/
M-7060(D)
OPEN or <1 VDC
+4 ~ +30 VDC
M-7060P(D)
OPEN or <4 VDC
+10 ~ +50 VDC
INx R
Sink
+-
INx R
To other
channels
IN.COM
+-
INx R
Source
- +
ON State
Readback as 1
Output Type
Relay Output
in
RL1 and RL2
AC/DC
Load
Load1
Load2
AC/DC
RLx NO
RLx COM
IN.COM
To other
channels
OFF State
Readback as 0
Load
RLx NO
RLx COM
RLx NO
Load1
RLx NO
RLx NC
Load2
AC/DC
RLx NC
RLx COM
 Ordering Information
I-7060 CR
4-channel Isolated Digital Input and 4-channel Relay
Output Module using the DCON Protocol (Blue Cover)
(RoHS)
I-7060-G CR
4-channel Isolated Digital Input and 4-channel Relay
Output Module using the DCON Protocol (Gray Cover)
(RoHS)
I-7060D CR
I-7060 with LED Display (Blue Cover) (RoHS)
I-7060D-G CR
I-7060-G with LED Display (Gray Cover) (RoHS)
M-7060-G CR
4-channel Isolated Digital Input and 4-channel Relay
Output Module using the DCON and Modbus Protocols
(Gray Cover) (RoHS)
M-7060D-G CR
M-7060-G with LED Display (Gray Cover) (RoHS)
M-7060P-G CR
4-channel Isolated Digital Input and 4-channel Relay
Output Module using the DCON and Modbus Protocols
(Gray Cover) (RoHS)
R
- +
AC/DC
RLx COM
M-7060PD-G CR M-7060P-G with LED Display (Gray Cover) (RoHS)
 Accessories
tM-7520U CR
RS-232 to RS-485 Converter (RoHS)
I-7514U CR
4-channel RS-485 Hub (RoHS)
tM-7561 CR
USB to RS-485 Converter (RoHS)
SG-770 CR
7-channel Differential or 14-channel
Single-ended Surge Protector (RoHS)
tM-SG4 CR
RS-485 Bias and Termination Resistor Module
(RoHS)
Signal Conditioning Modules for Thermocouple,
SG-3000 Series RTD, DC Voltage, DC Current and Power Input
transformers
Website: http://www.icpdas.com
3
E-mail: sales@icpdas.com
Vol. RIO-RS-485 1.0.00 (2011.02.28)
I-7060/I-7060D/M-7060(D)/M-7060P(D)
Relay Output
in
RL3 and RL4
INx
To other
channels
IN.COM
To other
channels
IN.COM
2
RS-485 Remote I/O Modules
+Vs
1
RL1COM
Embedded
Controller
DATA+
11 RL1
IN3
RL3 COM
IN0
EEPROM
RL4 NO
IN.COM
RL4 NC
20 RL4 COM
+5 V
84
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising