How-to Guide ConnectLine App for Android devices App

How-to Guide ConnectLine App for Android devices App
How-to Guide
ConnectLine App
for Android devices
App version 1.3.0
Introduction
This is a detailed guide to the ConnectLine App for Android smartphones and
tablets.
•
•
•
•
•
How to pair Streamer with an Android™ device
How to get the app on Google Play™
Function and features of the Android device using the app
Overview of ConnectLine functions controlled through the app
Troubleshooting
The Remote Control App is intended to assist users of wireless hearing instrument to
control functionality provided by their hearing solution.
Disclaimer
Oticon is not responsible for the consequences of using this app outside
intented use.
6 Install app
7 App overview
8 Programs
12 Make call
14 Music
16 TV/Microphone/Mini-Jack
18 FM/T-Coil
20 Second mobile phone
0543
The ConnectLine App for Android smartphones and tablets requires any Streamer Pro with
firmware 1.3 or later. Please visit www.oticonusa.com/connectline for more details on compatibility.
2
4 How to pair
10 Answer call
Intended Use
Oticon A/S
Kongebakken 9
DK-2765 Smørum
Denmark
www.oticon.com
Table of Contents
Android, Google Play and other marks are trademarks of Google Inc. The Android robot is reproduced or
modified from work created and shared by Google and used according to terms described in the Creative
Commons 3.0 Attribution License.
21 Landline phone
22 Settings
30 Troubleshooting
How to pair the Android device and Streamer Pro
Prepare Streamer
Press the power button on
top of the Streamer until
the top LED flashes blue.
4
Find settings icon
Find the settings icon on
the Android device.
Press Settings
Select Bluetooth
Find the Bluetooth icon in
the settings menu.
Find Streamer Pro 1.3
Select Streamer Pro 1.3
Press Pair
Enter PIN
If promped enter the Pin for
Streamer 0000 (four zeros).
Verify connection
Check that Streamer Pro is
now connected.
It should read “Connected”
and you should see a small
Bluetooth icon in the top
status menu.
5
Install App
App overview
Settings
Step 1:
In Google Play select the
search function.
The “Carousel”
Swipe and select
“Streaming source”
Step 2:
In the seach field , type
“Oticon”.
Mute (page 9)
Programs (page 8)
Open Google Play
Find the Google Play store
app on your Android device.
Press it.
Search, download & sign in
Install
Press the green install button
App available
The ConnectLine App should
now be on your device.
Volume up/down
Back dir (page 29)
6
7
Programs
Program selector
Hearing instrument
programs can be selected
directly.
8
Mute
Custom labeling
Labels can be assigned to
programs that already exist
in the Hearing instruments.
Note:
Adding a label here does
NOT add a new program in
the Hearing Instruments.
Custom labels
You can add labels and icons for hearing instrument programs. Go
to Settings > Hearing Instrument Programs. Press the “+” button
to add icons for additional programs. You can also edit the names of
programs on this screen.
While Streaming
While streaming, the
microphones of the hearing
instruments can be muted
to suppress surrounding
sound/noise.
While not Streaming
If not Streaming, the microphones on
Inium Platform hearing instruments or
later can be muted for quiet/comfort.
9
Answer call - App running
App is running
The ConnectLine App is
running. In this example the
user is listening to music
(from the phone).
10
Incoming call
When receiving an incoming
call, the ConnectLine App is
“pushed to the back” and the
phone’s normal call handling
window is opened. The call
is either answered on the
Streamer itself or using the
phone’s answer button .
App NOT running
In a call
When taking a call, the
phone’s call handling
window continues to be
active.
AutoResume
When the call is ended, the
app (and the Connectline
system) returns to its pre­
vious state (AutoResume).
In this example, it returns to
the music screen.
App is not running
If the ConnectLine App is
not running, the phone is
typically on its “home view.”
Incoming call
When the user receives an in­
coming call, the phone’s normal
call handling window is opened.
The call is either answered on
the Streamer itself or using the
phone’s answer button.
In a call
When taking a call, the
call handling window
continues to be active.
Call ended
Phone returns to previous
(idle) state.
11
Make a call with the mobile phone
Select Phone
Key in number
Key in number followed by
“Call.”
Call active/End call
End call either on the
phone or on the Streamer
Pro (phone button).
App is running
Close the app (press the
Home button once).
12
This guide continues on next page
13
Play your favorite music
Automatic connections for music player
To enable the Streamer to automatically start audio Streaming when the music player is
running, “automatic connections” should be enabled.
Settings --> Streamer and ConnectLine --> Phone --> Enable automatic connections
14
Start music player
Click the home button to
push the ConnectLine App
into the background.
Find and select the “Music”
icon.
Music player
You can play, pause and
regulate volume at will
through the music app.
Connection is automatically
made to Streamer and
hearing instruments.
Switch to the app
If you want to switch back to
the app, either press the task
button for an overview of
active apps, and then choose
the ConnectLine App or press
the Home button once and
find the ConnectLine App as
you normally would.
Select and resume
If using the ConnectLine
App, the Music icon on the
app is now a shortcut to the
Music player, which can be
started and stopped at will.
If other sources are chosen,
the music will be paused
until selected again.
15
TV
Microphone
Mini-Jack
TV icon will appear in Carousel if
TV Adapter has been previously
paired with Streamer Pro
Microphone icon will appear in Carousel
if the Microphone has been previously
paired with Streamer Pro
The “Audio in/out” icon will
appear if an audio cable has been
inserted into Streamer Pro’s
mini-jack port
TV
Microphone
Jack in/out
Pressing the TV icon will start/stop audio from
the TV adapter.
16
Pressing the Microphone icon will start audio
streaming from the ConnectLine Microphone.
Streaming can also be started from the microphone
or from the Streamer.
If a mini-jack audio cable is
inserted into Streamer Pro, audio
streaming is automatically started.
Mini-Jack Auto Streaming
Auto Streaming can be enabled or disabled in
the ConnectLine App.
Settings--> Streamer & ConnectLine --> Other --> Mini-Jack Auto Streaming.
17
FM
T-Coil
The FM icon will appear in
Carousel if an FM Receiver is
attached to Streamer Pro
FM
Pressing the FM icon will
start/stop audio streaming
from FM.
18
FM Autostart
Automatic FM streaming can be can be enabled/disabled in Settings.
Settings--> Streamer & ConnectLine --> Other --> FM Autostart
T-Coil
Pressing the T-Coil icon will start/
stop audio streaming from Streamer
Pro’s Teleloop receiver
19
Using a second mobile phone
Landline phone
An icon does not appear in Carousel
for a second mobile phone connection
A Phone icon will appear in Carousel if Streamer
Pro is in range of a paired Phone Adapter
WARNING!
To ensure that your system is not
operated without your consent
or knowledge, we recommend
that the app is only installed on
your personal devices.
Decline or accept
call
An incoming call is signaled
in the hearing instruments
and in the app. The call can
be accepted either in the
app or on the Streamer.
20
End call
The call can be ended in the
app (or on the Streamer).
Multiple apps running
If more than one phone/device
is paired with the Streamer, the
Streamer will be controlled by
the phone/device from where
the app was most recently
opened.
App is running
If a landline Phone Adapter
has been paired with
Streamer Pro and is within
range, it will appear as a
Phone icon in the app’s
Carousel. If the app is not
running, calls must be
answered directly from the
Streamer Pro.
Answer call
An incoming call is signaled
in the hearing instruments
and in the app. The call can
be accepted either in the
app or on the Streamer.
End Call
The call can be ended in the
app (or on the Streamer).
AutoResume
If another source was active
(in this example, music)
that source will be resumed
after the call is ended.
21
Settings - Streaming levels
Settings - Streaming source labeling
Streaming levels
Streaming source labeling
Streaming levels can be adjusted for each streaming source
independently. While streaming, the active source will be
highlighted with magenta.
The streaming sources can be labeled according to personal preferences.
Settings --> Name Streaming Sources
Settings --> Streaming levels
22
23
Settings - Phone
1: Last Number Redial
If enabled, last number redial can be started by pressing and holding the phone button on the Streamer (if supported by the mobile phone).
1
2
3
4
5
6
7
8
Phone settings
A selection of settings which affects the daily use of phones may be customized.
2: Voice Dial
If enabled, briefly pressing the phone button on the Streamer will enable voice dial (if supported by your mobile phone and you are not in
range of a Phone Adapter).
3: Transfer Call
If enabled, pressing and holding the phone button on the Streamer will transfer a call back to the mobile phone.
4: Reject Call
If enabled, an incoming mobile phone call can be rejected by pressing “volume down” on the Streamer.
5: Automatic connections
Allow automatic connections, e.g. SMS/text notifications and music players.
6: Ring tone, Cell phone
Ring tone associated with calls from your mobile phone(s).
7: Ring tone, landline
Ring tone associated with calls from the Phone Adapter.
8: Cell phone volume
Enables you to adjust the volume of the call using the volume buttons on the mobile phone.
24
25
Settings - Streamer
Settings - Other
1: Mini-Jack Auto Streaming
If enabled, audio streaming from mini-jack input will automatically
commence when audio cable is inserted.
1: Disable Volume Control
Allows you to enable or disable Streamer’s volume control of the
hearing instruments.
1
2
2: Enable Program Shift
If enabled, program shift of hearing instruments can be carried­
out using the Streamer.
1
2
3
4
5
6
Streamer settings
A selection of settings may be customized.
Other settings
A selection of settings which affects the daily use of the
Streamer itself may be customized.
2: FM Autostart
If enabled, FM streaming will automatically commence when FM
receiver is inserted.
3: Answers call, all buttons
If enabled, all front buttons can be used to answer call.
4: T-Coil/A2DP
If not selected, a short press of Streamer’s AUX button starts A2DP
(long press starts T-Coil). If selected, a short press of Streamer’s AUX
button starts T-Coil (long press starts A2DP).
5: Button Indicators ON
If disabled, Streamer’s button indicators will not light up.
6: Remote Control When Off
If enabled, the Streamer can be used as a remote control of the
Hearing Instruments even when turned off.
26
27
Settings - Appearance
Back dir (“backwards directionality”)
A
B
Visual appearance
The visual appearance of the app can be changed so it is either black or white. (A)
For both colors, thin or thick icon outlines can be selected. (B)
Enable
Back dir has to be enabled
in the settings menu
Settings
Select hearing instrument
programs
Settings
Enable back dir
Settings
1. Show back dir on main screen
2. Set timer
3.Press done to save
Note:
Back dir is only supported
by Alta2 and Nera2
hearing instruments
28
29
Troubleshooting
Close app
Close/restart App
Click the task button for an
overview of active apps
30
Swipe the ConnectLine
App to the left so that it is
removed from the screen.
It is now completely
stopped.
Reset app
Resetting the app will restore
the app to its initial settings.
Reset Streamer
The Streamer is automatically
reset when powered off/on.
Re-pair Streamer and Android device
In some cases, especially if the device and Streamer have been paired multiple times with
other devices, it may be beneficial to clear all pairings in both the Android device and the
Streamer.
1. Turn Streamer off
2. On the phone: (settings > Bluetooth) select the Streamer then press “unpair”
3. Turn off phone
4. Turn Streamer on
5. On the Streamer: hold “power on” AND “volume up” for 10 seconds
6. Turn on phone and re-pair Streamer (see page 4)
31
People First is our promise
to empower people
to communicate freely,
interact naturally and
participate actively
15555-5040/06.15
People First
www.pro.oticonusa.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising