RadioLinx Wireless Specification

RadioLinx Wireless Specification
Wireless Specifications
Radios
Switches
Antennas
Cables
Amplifiers
Lightning Protection
Accessories
nd
1675 Chester Avenue, 2 Floor
Bakersfield, CA 93301
(661) 716-5100
June 2005
(661) 716-5101 (Fax)
About ProSoft Technology
ProSoft Technology serves the automation industry's communications and specialized application needs with high quality
products, application expertise, and technical support. With our home office in Bakersfield, CA, ProSoft Technology is
committed to providing localized sales and support to customers worldwide.
Sales, application engineering, and support services are provided internationally by our channels served by our Regional
Area Offices:
North America
Seven Regional Area Managers provide coverage for our distributors across the continent.
Latin America
Two full-service offices; one services Brazil exclusively, and the other provides coverage to
South America.
Europe
One full-service office based in France serves Europe, Middle East, and Africa.
Asia Pacific
Offices in India, China, and Malaysia service Asia, India, Australia, and New Zealand.
Company History
Development of ProSoft Technology’s first product began in 1988 under contract to Allen-Bradley. This initial firmware
solution provided Modbus Slave communications for the PLC platform.
Formally incorporated in 1990, by 1993 ProSoft Technology had developed an extensive protocol library which helped
them evolve from a single product company to a multiple product provider. Since then, ProSoft Technology has become a
major supplier of communication products for the industrial automation industry. Facilitated by our extremely active
product development program and customer recognition of our product quality, ProSoft Technology now has four product
families including:
In-chassis interface modules for Allen-Bradley control platforms PLC-5, SLC 500,
ControlLogix, Flex I/O, CompactLogix, and SCANport/Drives.
ProLinx stand-alone industrial gateways offer communication solutions between
automation platforms, controllers, field instrumentation, Ethernet, and serial networks.
In-chassis interface modules for Schneider Electric's Quantum platform.
Wireless industrial communication networks
Corporate Office:
nd
1675 Chester Avenue, 2 Floor
Bakersfield, CA 93301
(661) 716-5100
(661) 716-5101 (Fax)
e-mail: Prosoft@prosoft-technology.com
Industrial Wireless Network Solutions
ProSoft Technology industrial wireless modems and switches are designed to maximize network flexibility, reliability, and
performance in industrial control applications. ProSoft's RadioLinx products provide a unique combination of advanced
features.
RadioLinx wireless products serve Ethernet or serial applications and offer global compatibility product conformities in
frequency and power. By combining RadioLinx powerful wireless connectivity with ProSoft's longstanding expertise in
protocol interoperability for device and network layers, customers benefit by obtaining end-to-end industrial
communications solutions and support from one source.
RadioLinx radios come with ProSoft's three-year warranty and unlimited technical support. Sales are available worldwide.
Contact your automation equipment distributor or ProSoft Technology.
Contents
About ProSoft Technology .......................................................................................................... 1
Industrial Wireless Network Solutions ....................................................................................... 1
RADIOS.............................................................................................................................................. 3
RLX-IH .......................................................................................................................................... 4
RLX-FHE......................................................................................................................................... 5
RLX-FHES ...................................................................................................................................... 6
RLX-FHS......................................................................................................................................... 7
Port Layouts .................................................................................................................................. 8
Ordering Information .................................................................................................................... 9
PC SOLUTIONS............................................................................................................................... 11
RLX-PC-EB................................................................................................................................... 12
RLX-PC-IG.................................................................................................................................... 13
2.4 GHZ OMNIDIRECTIONAL ANTENNAS.................................................................................... 15
2 dBi Halfwave Antenna ............................................................................................................. 16
Tape Mount Antennas ................................................................................................................ 17
Straight Antenna ......................................................................................................................... 18
Articulating Omni Antenna ........................................................................................................ 19
Magnetic Mount........................................................................................................................... 20
Whipless Antennas..................................................................................................................... 21
Base Station Antenna................................................................................................................. 22
Heavy Duty Antenna ................................................................................................................... 24
2.4 GHZ DIRECTIONAL ANTENNAS ............................................................................................. 25
Panel/Patch Antennas ................................................................................................................ 26
Yagi Antennas ............................................................................................................................. 28
Parabolic Antennas .................................................................................................................... 30
CABLES ........................................................................................................................................... 31
LMR-195 Type Cables................................................................................................................. 32
LMR-400 Type Cables................................................................................................................. 33
LMR-600 Type Cables................................................................................................................. 34
VXL5-50 Type Cables.................................................................................................................. 35
Cables ........................................................................................................................................ 36
Cable Numbering ........................................................................................................................ 37
AMPLIFIERS .................................................................................................................................... 39
RLX-500 Amplifier ....................................................................................................................... 40
RLX-500 Amplifier Kit ................................................................................................................. 41
LIGHTNING PROTECTION ............................................................................................................. 43
Lightning Protection................................................................................................................... 44
POWER DIVIDER............................................................................................................................. 45
Power Divider Kit ........................................................................................................................ 46
Ordering Information .................................................................................................................. 46
Radios
Items in this Section
• RLX-IH
4
• RLX-FHE
5
• RLX-FHES
6
• RLX-FHS
7
• Port Layouts
8
• Ordering Information
9
Radios
RadioLinx Industrial Hotspot
RLX-IH
Environmental
Operating
temperature
Humidity
External power
Average power
The RadioLinx Industrial
Hotspot is four times more
powerful than high-speed
commercial grade radios,
allowing better coverage of the
factory floor with fewer radios.
It provides outdoor links of up
to 20+ miles.
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
** With external amplifier
Features and Benefits
Regulatory Approvals
ƒ
Type Approvals
FCC
Industry Canada
Europe / CE
Mexico
Australia
Brazil
Malaysia
Channel data rates
Receiver sensitivity
Channels
(user selectable)
Outdoor range
Security
Physical
Enclosure
Size
Ethernet port
Antenna ports
Weight
FCC Part 15.247
RSS 210
LVD EN 50850-2000
RF Safety EN 50364-2001
EMC EN 301 489-1,
EN 301 489-17
Spectrum EN 300 328 v1.4.1
Nom 121 SCT1 2 or 1
AS/NZS 4771
365 / 2004 e
238 / 2000
SIRIM
Hazardous Locations
UL
UL 1604 Class 1 Division 2,
Groups A, B, C, D
Temp Code T4A
CSA/cUL
C22.2 No. 213-1987
ATEX Zone 1
ATEX I
Specifications
Network standard
Output power
To 90% RH, non-condensing
10 to 24 VDC
<6W
* Varies for other countries
Single unit repeater
functionality
ƒ
Powerful transmitter with
amplifier option for long
range outdoor
applications
Redundant master radios
WPA encryption, 802.1x and MAC ID
authentication
Built-in web server for browser-based
configuration and remote diagnostics
Fast data throughput
Compatible with any device that supports
Ethernet/IP, Modbus TCP/IP, or any 802.3
compliant Ethernet protocol
Three year standard warranty
Radio
Frequency
Wireless Medium
-30°C to +60°C
2400 to 2483.5 MHz (USA)*
Direct sequence
spread spectrum
802.11b
200 mW / 500 mW**
(32 mW - Europe/Asia)
11, 5.5, 2, 1 Mbps
-86 dBm @ 11 Mbps
-88 dBm @ 5.5 Mbps
-90 dBm @ 2 Mbps
-92 dBm @ 1 Mbps
11 - North America
13 - Europe
20 + miles at 11 Mbps
802.1x authentication
MAC white list
WPA encryption
WEP for legacy devices
ATEZ Zone 2
ATEX II 3 G EEx nC IIC
Visit our website for the latest certification information
Extruded aluminum with DIN
and panel mount
3.98” x 3.475” x 2.183”
10/100 Base-T connector,
shielded RJ-45
IEEE 802.3, 802.3u, 802.3x
(2) RP-SMA connectors,
active receive diversity
1.15 lbs /522g
4
Radios
RadioLinx Frequency Hopping Ethernet
RLX-FHE
Outdoor range
The RadioLinx Frequency
Hopping Ethernet radio is
designed to operate in highinterference environments by
combining advanced
frequency hopping and digital
signal processing technology
with outstanding receiver
sensitivity and antenna
diversity. This combination
results in exceptional noise
and interference rejection.
Security
Physical
Enclosure
Weight
Extruded aluminum with DIN
and panel mount
4.10” x 3.71” x 2.05”
(104.1 mm x 94.23 mm x
52.07 mm)
10/100 Base-T connector,
shielded RJ-45
IEEE 802.3, 802.3u, 802.3x
1 lbs /454g
Environmental
Operating
temperature
Humidity
External power
Average power
-40°C to +70°C
(-40° F to 158° F)
To 90% RH, non-condensing
10 to 24 VDC
<4W
Size
Ethernet port
The RLX-FHE is compatible
with all protocols that run over
standard IEEE 802.3 Ethernet
including TCP/IP, UDP, IPX,
NetBEUI, BootP, EtherNet/IP, and Modbus/TCP. The
RLX-FHE simultaneously supports multiple 802.3
compliant protocols.
15 + miles line of site with
high-gain antennas
ARC4 (40 or 128 bit)
Features and Benefits
Regulatory Approvals
ƒ
Type Approvals
FCC
Industry Canada
Europe / CE
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Supports up to 1000 addressed devices with 2000
radios and 78 repeaters per network
64 user-selectable data channels for multiple
network operation
Active antenna diversity
2.4 GHz frequency hopping spread spectrum
(FHSS) technology
Secure wireless communications with data
encryption, proprietary radio protocol, and 2.4 GHz
FHSS physical layer
Industrial temperature range
15+ mile range with high-gain antennas
(longer with repeaters)
Remote diagnostics without interrupting data
communications
Over air user programmability (after initial
configuration) using Windows-based software.
Three year standard warranty
Mexico
Australia
Brazil
Malaysia
Hazardous Locations
UL
UL 1604 Class 1 Division 2,
Groups A, B, C, D
Temp Code T4A
CSA/cUL
C22.2 No. 213-1987
ATEZ Zone 2
ATEX II 3 G EEx nC IIC
Visit our website for the latest certification information
Specifications
Radio
Frequency
Compliance
Protocols
Encryption
Network Topology
Hop Patterns
Error Detection
Radio Type
Output power
Channel data rates
Receiver sensitivity
Channels - user
selectable
Typical indoor
range
FCC Part 15.247
RSS 210
LVD EN 50850-2000
RF Safety EN 50364-2001
EMC EN 301 489-1,
EN 301 489-17
Spectrum EN 300 328 v1.4.1
Nom 121 SCT1 2 or 1
AS/NZS 4771
365 / 2004 e
238 / 2000
SIRIM
2400 to 24835.5 MHz
(varies by country)
IEEE 802.3, 802.3u, 802.3x
All standard IEEE
802.3 protocols
ARC4 (40 or 128 bit)
Peer-to-Peer, store and
forward repeater
64 independent,
non-interfacing networks
32-bit CRC and ARQ
(Automatic Re-Send Query)
Frequency Hopping
Spread Spectrum
1mW to 250mW,
programmable
(varies by country)
250 Kbps
-6
-96 dBm @ 10 BER
64 North America
(varies by country)
500 to 1500 ft
(150 to 450 meters)
5
Radios
RadioLinx Frequency Hopping Ethernet with Serial Device Server
Receiver sensitivity
Channels - user
selectable
Typical indoor
range
Outdoor range
RLX-FHES
The RadioLinx Frequency
Hopping Ethernet with Serial
Device Server contains an
embedded serial device server
that enables a transparent
connection between an
Ethernet host and a serial only
device connected to the RLXFHES RS-232 serial port.
Several serial protocols are
supported including DF1,
ASCII, DNP3, and
Modbus RTU.
Security
Physical
Enclosure
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Encryption
Network Topology
Hop Patterns
Error Detection
Radio Type
Output power
Channel data rates
-40°C to +70°C
(-40° F to 158° F)
To 90% RH, non-condensing
10 to 24 VDC
<4W
Antenna ports
Regulatory Approvals
Type Approvals
FCC
Industry Canada
Europe / CE
Mexico
Australia
Brazil
Specifications
Compliance
Protocols
Environmental
Operating
temperature
Humidity
External power
Average power
Ethernet port
Supports up to 1000 addressed devices with 2000
radios and 78 repeaters per network
64 user-selectable data channels for multiple
network operation
Full-Duplex asynchronous communication rates to
100 Kbps
Active antenna diversity
2.4 GHz frequency hopping spread spectrum
(FHSS) technology
Secure wireless communications with data
encryption, proprietary radio protocol, and 2.4 GHz
FHSS physical layer
Industrial temperature range
15+ mile range with high-gain antennas
(longer with repeaters)
Remote diagnostics without interrupting data
communications
Over air user programmability (after initial
configuration) using Windows-based software
Three year standard warranty
Radio
Frequency
Weight
Serial Data Port
Features and Benefits
ƒ
Extruded aluminum with DIN
and panel mount
4.10” x 3.71” x 2.05”
(104.1 mm x 94.23 mm x
52.07 mm)
RS-232, DB9
Asynchronous halfduplex/full-duplex
2400 bps to 115.2 Kbps
full duplex
10/100 Base-T connector,
shielded RJ-45
IEEE 802.3, 802.3u, 802.3x
(2) RP-SMA connectors,
automatic antenna diversity
1 lbs /454g
Size
Encapsulated serial or
Modbus/TCP Ethernet packets
are delivered to the RLX-FHES socket where the serial
server extracts the serial data stream from the Ethernet
packets and outputs it to the RS-232 port. Bi-directional
serial communication is supported by encapsulating the
RS-232 port input stream into Ethernet packets, then
sending them to the host client via the established
socket interface.
-6
-96 dBm @ 10 BER
79 North America
(varies by country)
500 to 1500 ft
(150 to 450 meters)
15 + miles line of site with
high-gain antennas
ARC4 (40 or 128 bit)
Malaysia
2400 to 2483.5 MHz
(varies by country)
IEEE 802.3, 802.3u, 802.3x
All standard IEEE
802.3 protocols
ARC4 (40 or 128 bit)
Peer-to-Peer, store and
forward repeater
64 independent,
non-interfacing networks
32-bit CRC and ARQ
(Automatic Re-Send Query)
Frequency Hopping
Spread Spectrum
1mW to 250mW,
programmable
(varies by country)
250 Kbps
FCC Part 15.247
RSS 210
LVD EN 50850-2000
RF Safety EN 50364-2001
EMC EN 301 489-1,
EN 301 489-17
Spectrum EN 300 328 v1.4.1
Nom 121 SCT1 2 or 1
AS/NZS 4771
365 / 2004 e
238 / 2000
SIRIM
Hazardous Locations
UL
UL 1604 Class 1 Division 2,
Groups A, B, C, D
Temp Code T4A
CSA/cUL
C22.2 No. 213-1987
ATEZ Zone 2
ATEX II 3 G EEx nC IIC
Visit our website for the latest certification information
6
Radios
RadioLinx Frequency Hopping Serial
Channel data rates
Receiver sensitivity
Channels - user
selectable
Adjacent Channel
Rejection
Spurious Rejection
Typical indoor
range
Outdoor range
RLX-FHS
The RadioLinx Frequency
Hopping Serial radio allows
you to design multiple device
networks to share the same
RF network (channel) allowing
different protocols to share a
common repeater. A remote
RLX-FHS can be programmed
to operate as store and
forward repeaters to extend
network range.
Security
Physical
Enclosure
The RLX-FHS operates in
point-to-point, point-multipoint,
or peer-to-peer modes.
Addressable multi-drop RS485 operation is built into the
module. The RF output levels are user-configurable and
64 data channels allow multiple networks to operate in
the same area.
Weight
Environmental
Operating
temperature
Humidity
External power
Average power
-40°C to +75°C (-40° F to
167° F)
To 90% RH, non-condensing
10 to 24 VDC
<4W
Size
Ports
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Supports up to 1000 addressed devices with 2000
radios and 78 repeaters per network
64 user-selectable data channels for multiple
network operation
Active antenna diversity
2.4 GHz frequency hopping spread spectrum
(FHSS) technology
Intelligent routing of DF1, DNP 3.0, and
Modbus messages
Secure wireless communications with data
encryption, proprietary radio protocol, and 2.4 GHz
FHSS physical layer
Industrial temperature range
15+ mile range with high-gain antennas
(longer with repeaters)
Remote diagnostics without interrupting data
communications
Three year standard warranty
Antenna ports
Regulatory Approvals
Type Approvals
FCC
Industry Canada
Europe / CE
Specifications
Radio
Frequency
Protocols
Encryption
Network Topology
Hop Patterns
Error Detection
Radio Type
Output power
>50 dB
500 to 1500 ft
(150 to 450 meters)
15 + miles line of site with
high-gain antennas
ARC4 (40 or 128 bit)
Extruded aluminum with DIN
and panel mount
4.10” x 3.71” x 2.05”
(104.1 mm x 94.23 mm x
52.07 mm)
RS-232, DB9
RS-422 and RS-485
Asynchronous halfduplex/full-duplex
2400 bps to 115.2 Kbps
full duplex
(2) RP-SMA connectors,
automatic antenna diversity
1 lbs /454g
Features and Benefits
ƒ
250 Kbps
-6
-96 dBm @ 10 BER
64 North America
(varies by country)
>40 dB
2400 to 2483.5 MHz
(varies by country)
All standard IEEE
802.3 protocols
ARC4 (40 or 128 bit)
Peer-to-Peer,
store and forward repeater,
Point-to-Point,
Point-to-Multipoint
64 independent,
non-interfacing networks
32-bit CRC and ARQ
(Automatic Re-Send Query)
Frequency Hopping
Spread Spectrum
1mW to 250mW,
programmable
(varies by country)
Mexico
Australia
Brazil
Malaysia
FCC Part 15.247
RSS 210
LVD EN 50850-2000
RF Safety EN 50364-2001
EMC EN 301 489-1,
EN 301 489-17
Spectrum EN 300 328 v1.4.1
Nom 121 SCT1 2 or 1
AS/NZS 4771
365 / 2004 e
238 / 2000
SIRIM
Hazardous Locations
UL
UL 1604 Class 1 Division 2,
Groups A, B, C, D
Temp Code T4A
CSA/cUL
C22.2 No. 213-1987
ATEZ Zone 2
ATEX II 3 G EEx nC IIC
Visit our website for the latest certification information
7
Radios
RadioLinx Frequency Hopping Serial
Port Layouts
Top Ports
Bottom Ports
All three FH radios share the same top port
configuration
The FHE and FHES radios share the same bottom port
configuration.
FH Radios
FHE and FHES
IH Radio
FHS
IH
8
Radios
Ordering Information
Ordering Information
The following Ordering Information should be used to identify the radio product needed for your region. If you are unsure
which radio to select, please contact your local distributor.
RadioLinx 2.4 GHz Wireless Ethernet Switches
Country
Australia
China
Europe
France
Mexico
Saudi Arabia
Singapore
United Kingdom
USA
Catalog #
RLX-FHE-AU
RLX-FHE-CN
RLX-FHE-EU
RLX-FHE-FR
RLX-FHE-MX
RLX-FHE-SA
RLX-FHE-SG
RLX-FHE-UK
RLX-FHE-US
Frequency
2400-2483.5 MHz
2400-2483.5 MHz
2400-2483.5 MHz
2400-2454 MHz
2450-2483.5 MHz
2413-2439 MHz
2400-2483.5 MHz
2400-2483.5 MHz
2400-2483.5 MHz
RF Power
4W
500 mW EIRP
100 mW EIRP
100 mW EIRP
650 mW EIRP
100 mW EIRP
100 mW EIRP
100 mW EIRP
4W
Power Supply
AU
EU
EU
EU
US
US
UK
UK
US
RadioLinx 2.4 GHz Frequency Hopping Ethernet Switch with Serial Server
Country
Australia
China
Europe
France
Mexico
Saudi Arabia
Singapore
United Kingdom
USA
Catalog #
RLX-FHES-AU
RLX-FHES-CN
RLX-FHES-EU
RLX-FHES-FR
RLX-FHES-MX
RLX-FHES-SA
RLX-FHES-SG
RLX-FHES-UK
RLX-FHES-US
Frequency
2400-2483.5 MHz
2400-2483.5 MHz
2400-2483.5 MHz
2400-2454 MHz
2450-2483.5 MHz
2413-2439 MHz
2400-2483.5 MHz
2400-2483.5 MHz
2400-2483.5 MHz
RF Power
4W
500 mW EIRP
100 mW EIRP
100 mW EIRP
650 mW EIRP
100 mW EIRP
100 mW EIRP
100 mW EIRP
4W
Power Supply
AU
EU
EU
EU
US
US
UK
UK
US
Frequency
2400-2483.5 MHz
2400-2483.5 MHz
2400-2483.5 MHz
2400-2454 MHz
2450-2483.5 MHz
2413-2439 MHz
2400-2483.5 MHz
2400-2483.5 MHz
2400-2483.5 MHz
RF Power
4W
500 mW EIRP
100 mW EIRP
100 mW EIRP
650 mW EIRP
100 mW EIRP
100 mW EIRP
100 mW EIRP
4W
Power Supply
AU
EU
EU
EU
US
US
UK
UK
US
Frequency
2400-2483.5 MHz
2400-2483.5 MHz
2400-2483.5 MHz
2400-2454 MHz
2450-2483.5 MHz
2413-2439 MHz
2400-2483.5 MHz
2400-2483.5 MHz
2400-2483.5 MHz
RF Power
4W
500 mW EIRP
100 mW EIRP
100 mW EIRP
650 mW EIRP
100 mW EIRP
100 mW EIRP
100 mW EIRP
4W
Power Supply
AU
EU
EU
EU
US
US
UK
UK
US
RadioLinx 2.4GHz Frequency Hopping Serial Modem
Country
Australia
China
Europe
France
Mexico
Saudi Arabia
Singapore
United Kingdom
USA
Catalog #
RLX-FHS-AU
RLX-FHS-CN
RLX-FHS-EU
RLX-FHS-FR
RLX-FHS-MX
RLX-FHS-SA
RLX-FHS-SG
RLX-FHS-UK
RLX-FHS-US
RadioLinx 2.4 GHz Industrial Hotspot
Country
Australia
China
Europe
France
Mexico
Saudi Arabia
Singapore
United Kingdom
USA
Catalog #
RLX-IH-AU
RLX-IH-CN
RLX-IH-EU
RLX-IH-FR
RLX-IH-MX
RLX-IH-SA
RLX-IH-SG
RLX-IH-UK
RLX-IH-US
9
PC Solutions
Wireless radio cards for use in a laptop computer.
Items in this Section
• RLX-PC-EB
12
• RLX-PC-IG
13
PC Solutions
Industrial Wireless PC Card with External Antenna
Modulation
RLX-PC-EB
Operation
Channels
RF Output Power
Antenna
Two antenna connectors
(MMCX)
89dBm @ 11Mbps
91dBm @ 5.5Mbps
93dBm @ 2Mbps
95dBm @ 1Mbps
Sensitivity @
FER=0.08
The RadioLinx Industrial Wireless PC Card with
External Antenna is an ultra-fast wireless solution for
the most demanding industrial applications. While
providing the benefits of industrial wireless Ethernet
connectivity for fixed or mobile devices with 10/100
Base-T Ethernet connections, the RLX-PC-EB is a
high-power client radio for the “industrial hotspot” RLXIH and other wireless access devices.
Physical
Form Factor
Size
Features and Benefits
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Up to 23 dBm transmit output power providing up
to eight times more power than commercial grade
PC cards.
IEEE 802.11b compliant
Automatic data rate scaling at 11, 5.5, 2,
and 1 Mbps
Improved 64/128-bit WEP Engine
Wide coverage range up to 1200 meters in
open space
Advanced Power Management and extended
battery life
Plug and Play installation
Improved indoor multi-path distortion provides
higher link quality in indoor environments
Range (open
environment) @23
dBm
Operating Voltage
Compatibility
LED Indicator
Network
Architecture
Drivers
Access Protocol
Roaming
Security
Frequency Band
Radio Type
Weight
PCMCIA Type II PC Card
118 (L) mm x 54 (W) mm x
7.5 (H) mm
40 g
Environmental
Temperature
Range
Humidity
-10° C to 60° C Operating
-40° C to 70° C Storage
5% to 95% typical
Regulatory Approvals
Type Approvals
FCC
ETSI
FCC Part 15/UL
ETSI 300/328/CE
Ordering Information
RLX-PC-EB
Specifications
General
Radio Data Rate
CCK (11, 5.5 Mbps),
DQPSK (2 Mbps), DBPSK (1
Mbps)
11 for North America, 14 for
Japan, 13 for Europe, 2 for
Spain, and 4 for France
23 dBm (200mW) - FCC
20dBm (100mW) - CE
11, 5.5, 2, and 1 Mbps, Auto
Fall-Back
11 Mbps - 300m/450m
5.5 Mbps - 400m/600m
2 Mbps - 500m/750m
1 Mbps - 800m/1200m
3.3V/5V
Fully interoperable with
IEEE802.11b compliant
products
RF Link Activity
Support ad-hoc, peer-topeer networks, and
infrastructure
communications to wired
Ethernet networks via
Access Point
Windows 98/ME/2000/NT
4.0/CE/XP
CSMS/CA
IEEE802.11b compliant
64/128-bit WEP data
encryption
2.4 to 2.484 GHz
Direct Sequence Spread
Spectrum (DSSS)
12
802.11b PC Radio Card with
external antenna plug
PC Solutions
Industrial Wireless PC Card with Internal Antenna
RF Output Power
RLX-PC-IG
The RadioLinx Industrial Wireless PC Card with Internal
Antenna is an ultra-fast wireless solution for the most
demanding industrial applications. While providing the
benefits of industrial wireless Ethernet connectivity for
fixed or mobile devices with 10/100 Base-T Ethernet
connections, the RLX-PC-IG is a high-power client
radio for the “industrial hotspot” RLX-IH and other
wireless access devices.
Antenna
Receive @ typical
Features and Benefits
ƒ
ƒ
ƒ
ƒ
ƒ
Up to 21 dBm transmit output power providing up
to four times the transmit power of commercial
grade wireless cards
IEEE 802.11b and IEEE 802.11g compliant
Automatic data rate scaling at up to 54 Mbps
Wi-Fi Protected Access (WPA) with Pre-Shared
Key (PSK) (requires driver update)
802.11d global regulatory roaming
Physical
Form Factor
Size
Operating Voltage
Compatibility
LED Indicator
Network
Architecture
Drivers
Access Protocol
Security
Frequency Band
Radio Type
Modulation
Operation
Channels
1, 2, 5.5, 6, 9, 11, 12, 18, 24,
36, 48, and 54 Mbps
3.3V/5V
Fully interoperable with
IEEE802.11b &
IEEE802.11g compliant
products
RF Link Activity
Support ad-hoc, peer-topeer networks, and
infrastructure
communications to wired
Ethernet networks via
Access Point
Windows 98/ME/2000/NT
4.0/CE/XP
CSMS/CA
Wi-Fi Protected Access
(WPA)
2.12 to 2.484 GHz
CE
20dBm (100mW)
Power depends on country
regulations
Integrated with built-in
diversity
-92 dBm @ 1 Mbps
-89 dBm @ 2 Mbps
-88 dBm @ 5.5 Mbps
-91 dBm @ 6 Mbps
-90 dBm @ 9 Mbps
-85 dBm @ 11 Mbps
-87 dBm @ 12 Mbps
-85 dBm @ 18 Mbps
-82 dBm @ 24 Mbps
-78 dBm @ 36 Mbps
-71 dBm @ 48 Mbps
Weight
PCMCIA Type II PC Card
118 (L) mm x 54 (W) mm x
7.5 (H) mm
40 g
Environmental
Temperature
Range
Humidity
0° C to 55° C Operating
-40° C to 70° C Storage
5% to 95% typical
Specifications
General
Radio Data Rate
FCC
< 23 dBm (200mW)
@ 1, 2, 5.5, 11 Mbps
<22 dBm (158 mW)
@ 6, 9, 12, 18 Mbps
< 19 dBm (79 mW)
@ 24, 26 Mbps
< 18 dBm (63 mW)
@ 48, 54 Mbps
Regulatory Approvals
Type Approvals
FCC
ETSI
FCC Part 15/UL
ETSI 300/328/CE
Ordering Information
RLX-PC-IG
Direct Sequence Spread
Spectrum (DSSS)
CCK (11, 5.5 Mbps),
DQPSK (2 Mbps), DBPSK (1
Mbps), BPSK (6, 9 Mbps),
QPSK (12, 18 Mbps), 16QAM (24, 36 Mbps), 64QAM (48, 54 Mbps)
11 for North America, 13 for
Europe, 2 for Spain, and 4
for France
13
802.11g PC Radio Card with
internal antenna
2.4 GHz Omnidirectional Antennas
All antennas in this section have been tested for
compatibility with RadioLinx products. Please see our
Antenna Selection Guide to assist you in choosing the
best antenna for your application.
Items in this Section
• 2 dBi Halfwave Antenna
16
• Tape Mount Antennas
17
• Straight Antenna
18
• Articulating Omni Antenna
19
• Magnetic Mount
20
• Whipless Antennas
21
• Base Station Antenna
22
• Heavy Duty Antenna
24
2.4 GHz Omnidirectional Antennas
Halfwave Antenna
Ordering Information
2 dBi Halfwave Antenna
A2402S-OSLP
The Halfwave Antenna is molded in
polyurethane with a reverse polarity SMA
connector.
General Specifications
Radome
Material
Polarization
Nominal
Impedance
Termination
Height
Features and Benefits
ƒ
ƒ
2 dBi Omnicollinear Antenna
Halfwave design does note require a
groundplane.
Rugged injection molded design exceeds
stringent OEM drop test requirements.
Flexible Urethane Exterior
(molded)
Vertical
50 Ohms
Type RP-SMA plug
2.5”
Electrical Specifications
Model #
A2402S-OSLP
Frequency Range
2400-2500 MHz
Gain
2 dBi
16
Bandwidth
75 MHz
VSWR
1.5:1
2.4 GHz Omnidirectional Antennas
Tape Mount Antennas
Features and Benefits
ƒ
ƒ
ƒ
ƒ
ƒ
Tape Mount Antennas
The RadioLinx Tape Mount Antennas have a VSWR of
less than 1.5:1. These rugged antennas accommodate
a wide variety of applications including office LAN
environments, factories, remote telemetry, and other
harsh environments where a compact, stick-on mount
antenna solution is required. The antennas utilize 3M®
very high bond tape for quick, easy mounting.
High bond tape mount provides mounting flexibility
for various applications, including computer
monitors, hand-held devices, cashier terminals,
glass, and so on.
Rugged, ultra thin housing design withstands
heavy use and provides maximum visibility.
The antennas can be used for fixed or mobile
applications providing maximum flexibility
and versatility.
Desktop base mount included which is ideal for
use in office and home environments.
Antennas are provided in kits that include the
antenna with a 72 inch pigtail that can be fitted
with various connector types, and a base.
Ordering Information
A2402S-OTM
2 dBi Omnidirectional Tape Mount
Antenna
General Specifications
Radome
Material
Polarization
Nominal
Impedance
Mounting
Method
Termination
U.V. resistant pultruded
fiberglass
Vertical, linear
50 Ohms
3M® high bond tape
Desktop base mount included
in black
Type RP-SMA plug with LMR
100A 72” pigtail
Electrical Specifications
Model #
A2402S-OTM
Frequency Range
2400-2500 MHz
Gain
2 dBi
VSWR
<1.7:1 on glass, <2:1 in free space
Max Power
5W
Color
Black
Mechanical Specifications
Model #
A2402S-OTM
Temperature Range Cable
40° C to +85° C
72” (1,828.8 mm)
LMR100A
Dimensions
5.7” L x 1” W x 0.1” D
(144.8 x 25.4 x 2.54 mm)
Patterns
A2402S-OTM Elevation
A2402S-OTM Azimuth
17
Weight
0.14 lbs (0.064 kg)
2.4 GHz Omnidirectional Antennas
Straight Antenna
Straight Antenna
Ordering Information
A2402S-OS
A2405S-OS
The Straight Antenna works well with beltmounted remote radios and is available in two
models.
2 dBi Omnicollinear Antenna
5 dBi Omnicollinear Antenna
General Specifications
Radome
Material
Connector
Material
Polarization
Nominal
Impedance
Termination
Height
Flexible Urethane Exterior
(molded)
Brass with black chrome plating
Vertical
50 Ohms
Type RP-SMA plug
2.5”
Electrical Specifications
Model #
A2402S-OS
A2405S-OS
Frequency Range
2400-2500 MHz
2400-2483.5 MHz
Gain
2 dBi
5 dBi
Mechanical Specifications
Model #
A2402S-OS
A2405S-OS
Height
4.1” (104 mm)
7.1” (180 mm)
Weight
0.34 lbs (0.172 kg)
0.38 lbs (0.172 kg)
Patterns
A2402S-OS Elevation
A2405S-OS Elevation
A2402S-OS Azimuth
A2405S-OS Azimuth
18
Operation Temp
-20 to +65 celsius
-20 to +65 celsius
Storage Temp
-30 to +75 celsius
-30 to +75 celsius
2.4 GHz Omnidirectional Antennas
Articulating Omni Antenna
Articulating Omni Antenna
Ordering Information
The Articulating Omni Antenna bends at the
connection and is typically connected to a
remote radio.
A2405S-OA
5 dBi Omnicollinear Antenna
General Specifications
Radome
Material
Connector
Material
Polarization
Nominal
Impedance
Termination
Height
Flexible Urethane Exterior
(molded)
Brass with black chrome plating
Vertical
50 Ohms
Type RP-SMA plug
2.5”
Electrical Specifications
Model #
A2405S-OA
Frequency Range
2400-2500 MHz
Gain
5 dBi
Mechanical Specifications
Model #
A2405S-OA
VSWR
<2.0:1
Height
6.5” (166 mm)
Operation Temp
-20 to +65 celsius
Patterns
A2405S-OA Elevation
A2405S-OA Azimuth
19
Storage Temp
-30 to +75 celsius
2.4 GHz Omnidirectional Antennas
Magnetic Mount Omnicollinear Antenna
Ordering Information
Magnetic Mount
A2405S-OM
The engineered design of the Magnetic Mount
Omnicollinear Antenna combines a magnetic
base, an antenna whip and high efficiency
cable that allows direct installation on metallic
surfaces without the need to use a separate
antenna mount.
General Specifications
Radome
Material
Polarization
Nominal
Impedance
Mounting
Method
Termination
Features and Benefits
ƒ
ƒ
5 dBi Omnicollinear Magnetic
Mount Antenna
Black coated whip assembly and machine
polymer base. Inconspicuous appearance,
less susceptible to theft or vandalism.
High efficiency cable provides maximum
power to the antenna to help optimize
system performance.
Stainless steel with black
chrome finish
Vertical
50 Ohms
Magnetic Base
Type RP-SMA plug on
72" pigtail
Electrical Specifications
Model #
A2405S-OM
Frequency Range
2400-2484 MHz
Gain
5 dBi
VSWR
<1.5:1
Max Power
15 W
Mechanical Specifications
Model #
A2405S-OM
Height
9” (228.6 mm)
Weight
2.5 oz
Operation Temp
-40 to +70 celsius
Patterns
A2405S-OM Elevation
A2405S-OM Azimuth
20
Rod/Coil Type
Trilinear/open
2.4 GHz Omnidirectional Antennas
A2403NBH-OC Whipless Antenna
Whipless Antennas
Ordering Information
A2403NBH-OC
The RadioLinx A2403NBH-OC Whipless
Antenna is a tough antenna for outdoor
or indoor applications. The revolutionary
design features field diversity with both
vertical and horizontal polarization
components. This provides the antenna
diversity, frequency agility, low visibility, wide
bandwidth, wide bandwidth, and a low angle radiation
pattern that is superior to traditional gain antennas in
most applications.
General Specifications
Radome
Material
Polarization
Nominal
Impedance
Mounting Base
Diameter
Termination
Features and Benefits
ƒ
ƒ
ƒ
ƒ
3 dBi Omnidirectional N Jack
Bulkhead Antenna
White housing
Vertical or horizontal
50 Ohms
Bulkhead mounting hardware
included
Type N jack standard
Excellent for voice to telemetry applications
Permanent mounting. Permanent mount models
are available for high-risk applications such as
metering where antennas must resist vandalism
and achieve economical mounting
The patented whipless design allows car washes
without removing the antenna. Whipless means
they don't look like antennas, attract less attention,
less vandalism, and have lower wind resistance.
The A2403NBH-OC is also less susceptible to
damage by trees, garages, or other obstructions
Field diversity means that the antenna is
simultaneously sensitive to both electric and
magnetic fields of signal, like having two antennas.
Field diversity makes the antenna resistant to the
picket fence fading and multipath nulls that are
found in urban operation and undulating mobile
environments.
Electrical Specifications
Model #
Frequency Range
Gain
A2403NBH-OC
2400-2500MHz
3 dBi
Bandwidth @
1.5:1 WVSR
>100 MHz
VSWR
1.5:1
Mechanical Specifications
Model #
A2403NBH-OC
Height
3.5 inches (89.9 mm)
Weight
N/A
Patterns
A2403NBH-OC Elevation
A2403NBH-OC Azimuth
21
Max
Power
100 W
Downtilt
N/A
2.4 GHz Omnidirectional Antennas
Base Station Antenna
Ordering Information
Base Station Antenna
A2404NJ-OC
The RadioLinx wireless broadband
Omnidirectional Base Station Antennas are
designed to provide maximum performance and
reliability under the toughest weather
conditions. These antennas feature a U.V.
stable, vented radome that provides the ultimate
protection against weather elements. The
antennas can be mast, wall, or ceiling mounted.
A2406NJ-OC
A2408NJ-OC
4 dBi Omnidirectional N Jack
Collinear Antenna
6 dBi Omnidirectional N Jack
Collinear Antenna
8 dBi Omnidirectional N Jack
Collinear Antenna
General Specifications
Radome
Material
Polarization
Nominal
Impedance
Mounting Base
Diameter
Mounting
Method
These antennas are typically composed of
several linear antennas stacked on top of each
other. The number of stacked elements
increases the gain of this antenna which is
typically between 5 to 8 dBi depending on the
number of elements. This array of antennas provides
an omni-directional pattern. Polarity is linear, parallel to
the length of the antenna.
UV resistant pultruded
fiberglass
Vertical
50 Ohms
1.25 inches
RLX-MMK-1924
L-bracket mount for wall or pipe
mount
RLX-MMK8
Aluminum extruded bracket for
mast mounting
RLX-MMK11
Ceiling mount bracket
Type N jack standard with all
models
Features and Benefits
ƒ
ƒ
ƒ
ƒ
ƒ
UV stable, pultruded fiberglass radome. Allows
outdoor installation even in harsh climates.
Vented system design provides reliable
performance by protecting the electrical design
against extreme moisture and/or temperatures.
Thread relief on connector. Improved accessibility
for taping reduces installation time and improves
overall effectiveness.
Internal O-ring seal in the base of the antenna with
integrated connector at the base. Ensures a
watertight seal to prevent water from migrating into
the antenna connector.
Electrical downtilt options on select models
provide system planners flexibility in challenging
operating environments.
Termination
Electrical Specifications
Model #
Frequency
Gain
A2404NJ-OC
A2406NJ-OC
A2408NJ-OC
2400-2483.5 MHz
2400-2483.5 MHz
2400-2483.5 MHz
4 dBi
6 dBi
8 dBi
Bandwidth
@ 1.5:1
WVSR
100 MHz
100 MHz
100 MHz
Vertical
Beamwidth
@ ½ Power
30°
20°
13°
VSWR
Max
Power
Downtilt
< 1.5:1
< 1.5:1
< 1.5:1
25 Watts
25 Watts
25 Watts
N/A
N/A
N/A
Mechanical Specifications
Model #
Wind
Survival
A2404NJ-OC
125 mph
Equivalent Lateral Thrust
@ Rated Wind
Flat Plate
Area
2
.02 ft
2.1 lbs
A2406NJ-OC
125 mph
.04 ft
A2408NJ-OC
125 mph
.06 ft
Bending
Movement @
Rated Wind
0.7 ft-lbs
2
3.0 lbs
1.4 ft-lbs
2
5.2 lbs
4.4 ft-lbs
22
Height
Weight
8.1”
(294.6 mm)
11.6”
(294.6 mm)
20.2”
(513.1 mm)
0.34 lbs
(0.172 kg)
0.38 lbs
(0.172 kg)
0.50 lbs
(0.226 kg)
2.4 GHz Omnidirectional Antennas
Base Station Antenna
Patterns
A2404NJ-OC Elevation
A2406NJ-OC Elevation
A2408NJ-OC Elevation
Mounting Hardware
Part Number
RLX-MMK8
Description
Mounting bracket for mounting a
1 ¼ inch diameter antenna to a
2 inch diameter mast
Included with
A2404NJ-OC
A2406NJ-OC
A2408NJ-OC
Works with
A2404NJ-OC
A2406NJ-OC
A2408NJ-OC
RLX-MMK11
Ceiling mount bracket for
2.4 GHz
N/A
A2406NJ-OC
A2408NJ-OC
RLX-MMK1924
L bracket for mounting
omnidirectional antennas to a 2
inch maximum diameter mast.
Bracket is 6 inches long with a
5/8 diameter hole
N/A
A2404NJ-OC
A2406NJ-OC
A2408NJ-OC
23
Illustration
2.4 GHz Omnidirectional Antennas
Heavy Duty Antenna
Ordering Information
Heavy Duty Antenna
A2403NJ-OCD
A2406NJ-OCD
A2409NJ-OCD
The Omnidirectional Heavy Duty Antenna
Series antennas are optimized for use in a
wide variety of wireless systems. Typical
uses include WLAN access points or
bridge (802.11b/g), and surveillance
transmitters.
General Specifications
Radome
Material
Polarization
Nominal
Impedance
Mounting Base
Diameter
Mounting
Method
Termination
These antennas consist of a collinear
array with elements stacked
vertically.Unique phasing cancels out-ofphase current distribution, improving system
performance. This design maintains an omni pattern in
the horizontal plane. The OCD series are free space
antennas; no ground plane is required.
Features and Benefits
ƒ
ƒ
ƒ
ƒ
ƒ
3 dBi Omnidirectional Antenna
6 dBi Omnidirectional Antenna
9 dBi Omnidirectional Antenna
Black fiberglass
Vertical
50 Ohms
Use mast up to 2"
Mast mount kit included
Type N jack
UV stable, pultruded fiberglass radome. Allows
outdoor installation even in harsh climates.
3dBi, 6 dBi, and 9 dBi antennas provide uniform
omni coverage
Unique design allows economical build out
Mounting kit includes all hardware needed.
Reflector option provides directional beamshaping
and increased performance.
Electrical Specifications
Model #
Frequency
Gain
A2403NJ-OCD
A2406NJ-OCD
A2409NJ-OCD
2400-2485 MHz
2400-2485 MHz
2400-2485 MHz
3 dBi
6 dBi
9 dBi
Vertical Beamwidth
(-3 dB point)
55°
25°
14°
Maximum Power
25 Watts
25 Watts
25 Watts
Mechanical Specifications
Model #
Wind Survival
A2403NJ-OCD
A2406NJ-OCD
A2409NJ-OCD
100 mph
100 mph
100 mph
Equivalent Flat
Plate Area
10-40 Sq. inch
10-40 Sq. inch
10-40 Sq. inch
Height
Weight
16"
19"
27"
1.5 lbs
1.5 lbs
2.0 lbs
Patterns
A2403NJ-OCD Elevation
A2406NJ-OCD Elevation
24
A2409NJ-OCD Elevation
2.4 GHz Directional Antennas
All antennas in this section have been tested for
compatibility with RadioLinx products. Please see our
Antenna Selection Guide to assist you in choosing the
best antenna for your application.
Items in this Section
• Panel/Patch Antennas
26
• Yagi Antennas
28
• Parabolic Antennas
30
2.4 GHz Directional Antennas
Directional Panel/Patch Antennas
Ordering Information
Panel/Patch
Antennas
A2408NJ-DP
A2413NJ-DP
A2419NJ-DP
The RadioLinx Directional
Panel/Patch Antennas are
designed to cover 2.45 GHz
ISM with a VSWR of less
than 1.5:1, obtaining
maximum gain with an
attractive, low profile
package. All models provide
efficient and stable
performance across the
band and can be mounted
indoors or outdoors.
8 dBi Panel Antenna
13 dBi Panel Antenna
19 dBi Panel Antenna
General Specifications
Polarization
Lightning
Protection
Mounting
Method
Termination
Linear
Direct Ground
Mounting brackets included
8 dBi antenna uses type N jack
on 8" pigtail
All others use type N jack
Features and Benefits
ƒ
ƒ
ƒ
ƒ
Flat design provides efficiency and low back lobes
with minimal depth dimension
Allowed in covenant controlled areas
Easy installation saves time and money
Protected from the environment
(ice loading and wildlife)
Electrical Specifications
Model #
A2408NJ-DP
A2413NJ-DP
A2419NJ-DP
Frequency
Range
2.4-2.5 GHz
2.4-2.5 GHz
2.4-2.5 GHz
Gain
8.5 dBi
13 dBi
19 dBi
Front-toBack Ratio
>30 dB
>30 dB
>30 dB
Horizontal
Beamwidth
60°
38°
18°
Vertical
Beamwidth
60°
38°
18°
VSWR
<1.5:1
<1.5:1
<1.5:1
Max
Power
100 W
100 W
100 W
Mechanical Specifications
Model #
Wind/ice
loading area
A2408NJ-DP
26.5 in²
(171 cm²)
72 in²
(466 cm²)
240 in²
(1552 cm²)
A2413NJ-DP
A2419NJ-DP
Lateral Thrust Torsional moment @ 100
@ 100 mph
mph with standard
mounting
5 lbs
0.1 ft/lbs
(11 kg)
(0.22 m/kg)
10 lbs
0.2 ft/lbs
(22 kg)
(0.22 m/kg)
15 lbs
0.4 ft/lbs
(33 kg)
(0.88 m/kg)
26
Dimensions
5.15" W x 5.15" H x .82" D
(13.1 x 13.1 x 2.1 cm)
8.5" W x 8.5" H x 1.125" D
(21.6 x 21.6 x 2.8 cm)
15.5" W x 15.5" H x 1.125" D
(39.4 x 39.4 x 2.8 cm)
2.4 GHz Directional Antennas
Directional Panel/Patch Antennas
Patterns
A2408NJ-DP Elevation
A2413NJ-DP Elevation
A2419NJ-DP Elevation
A2408NJ-DP Azimuth
A2413NJ-DP Azimuth
A2419NJ-DP Azimuth
27
2.4 GHz Directional Antennas
Directional Yagi Antenna
Yagi Antennas
ƒ
ƒ
The RadioLinx Directional Yagi Antenna can be used
as bridge antennas between two networks or for pointto-point communications. The antennas are field
adjustable for vertical or horizontal polarization with
matched principal plane beamwidth for optimum
performance in either orientation. This design also
provides improved front-to-back ratio and sidelobe
suppression that reduces interference. All models
feature a robust mounting structure for consistent
performance regardless of weather conditions.
rejection of more than 20 dB. Provides superior
signal quality with enhanced gain performance and
minimal interference from neighboring radiators.
30 dB front-to-back ratio permits less physical
separation on the tower, thus adding mounting
flexibility at installation sites where space is
limited.
Attractive weather-proof radome constructed of UV
resistant material provides robust and trouble free
use in harsh outdoor climates.
Ordering Information
A2410NJ-DY
A2415NJ-DY
General Specifications
Radome
Material
Polarization
Typically, Yagi antennas compose an array of linear
elements, parallel to on another and attached
perpendicular to and along the length of a metal boom.
Elements on one side of the feed element are longer
and act as reflectors. Elements on the other side of the
feed element are shorter and act as directors. The
antenna radiates in a beam out the end with the shorter
elements. Beam width varies (longer length produces a
narrower beam). This type of antenna produces gain in
the 6-15 dBi range depending on the overall geometry
of the antenna.
Lightning
Protection
Nominal
Impedance
Mounting
Method
Features and Benefits
ƒ
ƒ
ƒ
ƒ
10 dBi Directional N Jack Yagi
Antenna
15 dBi Directional N Jack Yagi
Antenna
Field adjustable to allow vertical or horizontal
polarity. Eliminates co-channel interference from
neighboring radiators. Polarity markings molded on
the antenna ensure proper installation and correct
orientation.
Optional articulating mount allows precise
adjustment of the antenna both vertically and
horizontally.
All antennas include a robust mast mount bracket
designed to withstand 125 mph wind.
Matched principal plane beamwidths with excellent
sidelobe suppression and cross polarization
Termination
White plastic
Vertical or horizontal, linear
(user adjustable)
DC grounded
50 Ohms
Heavy duty Yagi mounting
bracket (included) permits mast
mounting on mast up to 2
inches O.D. RLX-MYK18
adjustable wall/pipe mount
allows 180° (included angle)
azimuth and elevation
adjustment (sold separately)
Type N jack standard with all
models
Electrical Specifications
Model #
A2410NJ-DY
A2415NJ-DY
Frequency
Range
2.4-2.5 GHz
2.4-2.5 GHz
Gain
10 dBi
15 dBi
Front-toBack Ratio
23 dB
30 dB
Horizontal
Bandwidth
55°
30°
Vertical
Beamwidth
55°
30°
VSWR
<1.5:1
<1.5:1
Mechanical Specifications
Model #
Wind
Survival
A2410NJ-DY
A2415NJ-DY
Equivalent Length
Flat Plate
Area
125 mph
Lateral
Thrust at
Rated
Wind
5.8 lbs
0.060 ft
2
125 mph
18.3 lbs
0.020 ft
2
4.5” x 3” OD
(114 mm x 76 mm OD)
14” x 3” OD
(356 mm x 76 mm OD)
28
Weight
Cable
1 lbs
(0.5 kg)
1 lbs
(0.5 kg)
18” (457 mm)
coax
18” (457 mm)
coax
2.4 GHz Directional Antennas
Directional Yagi Antenna
Patterns
A2410NJ-DY Elevation
A2415NJ-DY Elevation
A2410NJ-DY Azimuth
A2415NJ-DY Azimuth
Mounting Hardware
Part Number
RLX-MYK18
Description
Adjustable Yagi mounting kit.
Clamps to a vertical mast up to
2 inches OD
Included with
N/A
29
Works with
A2410NJ-DY
A2415NJ-DY
Illustration
2.4 GHz Directional Antennas
Parabolic Antenna
Ordering Information
Parabolic Antennas
A2415NJ-DB
The Parabolic Antenna is
constructed of welded steel
wires which are galvanized
and then powder coat painted
with a light gray epoxy paint.
The wire grid semi-parabolic
design offers unsurpassed
low wind loading while
maintaining good RF
performance. The compact
low visual impact attractive
styling blends well in almost
any application.
A2419NJ-DB
A2424NJ-DB
General Specifications
Radome
Material
Polarization
Nominal
Impedance
Termination
Features and Benefits
ƒ
ƒ
ƒ
ƒ
15 dBi Directional N Jack
Parabolic Antenna
19 dBi Directional N Jack
Parabolic Antenna
24 dBi Directional N Jack
Parabolic Antenna
White plastic
Vertical or horizontal, linear
(user adjustable)
50 Ohms
Type N jack
Rugged and Weatherproof
Ultra Low Wind Loading and Low Visual Impact
Vertical or Horizontal Polarization
Various Connection Choices
Electrical Specifications
Model #
A2415NJ-DB
Frequency Range
2.4-2.485 GHz
Gain
15 dBi
A2419NJ-DB
2.4-2.485 GHz
19 dBi
A2424NJ-DB
2.4-2.485 GHz
24 dBi
Front-to-Back Ratio 3dB BW
17 dB
17° V
21° H
22 dB
11" V
17" H
25 dB
8" V
10" H
VSWR
<1.5:1
<1.5:1
<1.5:1
Mechanical Specifications
Model #
A2415NJ-DB
A2419NJ-DB
A2424NJ-DB
Dimensions
12" x 16" (305 x 406 mm)
16.5” x 24” (419 x 610 mm)
28.5" x 36" (724 x 914 mm)
Weight
4 lbs (1.8 kg)
6 lbs (2.7 kg)
11 lbs (5 kg)
Vertical Tilt
0 to 45°
0 to 45°
0 to 45°
Patterns
A2415NJ-DB
A2419NJ-DB
A2424NJ-DB
30
Cables
RadioLinx cables are designed to provide the lowest
attenuation and are pre-cut and assembled with
connectors at the factory to ensure ultimate reliability
and customer satisfaction.
Items in this Section
• LMR-195 Type Cables
32
• LMR-400 Type Cables
33
• LMR-600 Type Cables
34
• VXL5-50 Type Cables
35
• Cables
36
• Cable Numbering
37
Cables
LMR-195 Type Cables
LMR-195 Type Cables
Mechanical Specifications
Minimum Bend Radius
Bending Movement
Weight
Tensile Strength
Flat Plate Crush
0.5 in (12.7 mm)
0.2 ft lbs (0.27 N-m)
0.021 lb/ft (0.03 kg/m)
40 lbs (18.2 kg)
15 lb/in (0.27 kg/mm
Environmental Specifications
LMR-195 Type Cables are ideal for jumper assemblies
in wireless communication systems and short antenna
feed runs.
Installation Temp
Range
Storage Temp Range
Features and Benefits
ƒ
ƒ
ƒ
ƒ
ƒ
Operating Temp Range
Flexible: With a ½-inch mimimum bend radius, the
LMR-195 cable is substantially more flexible than
RG-142 and very comparable to RG-58. The LMR195 cable affords lower loss, greater shielding, and
lower cost.
Low Loss: LMR-195 boasts lower loss than other
RG58/RG142 type cables. This is achieved
through the use of a high velocity gas-injected
closed cell foam dielectric, and bonded aluminum
tape outer conductor.
Weatherproof: The UV-protected black
polyethylene jacket makes the cables rugged and
resistant to the full range of outdoor environments.
Various jacket materials are available to address
other indoor and outdoor requirements.
RF Shielding: The bonded aluminum tape outer
conductor is overlapped to provide 100%
coverage, resulting in >90 dB RF shielding (>180
dB crosstalk) and excellent interference immunity
(ingress and egress); a substantial improvement
from RG58s 40 dB and RG142s 60 dB
performance level
Phase Stability: The intimately bonded structure
and foam dielectric of LMR cables provide
excellent phase stability over temperature and with
bending. The high velocity dielectric results in
superior phase stability as compared with RG58
and RG142 solid dielectric cables.
-40° / +185° F
-40° / +85° C
-94° / +185° F
-70° / + 85° C
-40° / +185° F
-40° / +85° C
Electrical Specifications
Voltage Withstand
Peak Power
Jacket Spark
1000 VDC
2.5 kW
3000 VRMS
Attenuation Average @ 2500 MHz
dB/100 ft
18.1
dB/100 m
59.5
Ordering Information
Cable Type
LMR-195
LMR-195
LMR-195
LMR-195
LMR-195
LMR-195
LMR-195
LMR-195
LMR-195
LMR-195
LMR-195
LMR-195
LMR-195
LMR-195
LMR-195
LMR-195
Part Number
C19M10-30-002
C19M10-30-005
C19M10-30-010
C19M10-30-015
C19M10-30-020
C19M10-40-002
C19M10-40-005
C19M10-40-010
C19M10-40-020
C19M10-60-002
C19M10-80-002
C19M10-80-005
C19M10-80-010
C19M40-60-003
C19M40-80-003
C19M60-90-003
Part Description
2' LMR 195 RA RP-SMA plug--> RP-SMA BH jack cable
5' LMR 195 RA RP-SMA plug --> RP-SMA BH jack cable
10' LMR 195 RA RP-SMA plug --> RP-SMA BH jack cable
15' LMR 195 RA RP-SMA plug --> RP-SMA BH jack cable
20' LMR 195 RA RP-SMA plug --> RP-SMA BH jack cable
2' LMR 195 RA RP-SMA plug --> N plug cable
5' LMR 195 RA RP-SMA plug --> N plug cable
10' LMR 195 RA RP-SMA plug --> N plug cable
20' LMR 195 RA RP-SMA plug --> N plug cable
2' LMR 195 RA RP-SMA plug --> RA-N plug
2' LMR 195 RA RP-SMA plug --> N BH jack cable
5' LMR 195 RA RP-SMA plug--> N BH jack cable
10' LMR 195 RA RP-SMA plug --> N BH jack cable
3' LMR 195 N plug --> RA-N plug cable
3' LMR 195 N plug --> N Jack BH
3' LMR 195 RA N plug --> NBH jack cable
32
Power kW
0.09
Cables
LMR-400 Type Cables
LMR-400 Type Cables
Mechanical Specifications
Minimum Bend Radius
Bending Movement
Weight
Tensile Strength
Flat Plate Crush
Environmental Specifications
LMR-400 Type Cables are ideal for jumper assemblies
in wireless communication systems and antenna feed
runs less than one-hundred feet.
Installation Temp
Range
Storage Temp Range
Features and Benefits
ƒ
ƒ
ƒ
ƒ
ƒ
Operating Temp Range
Flexible: With a 1-inch minimum bend radius,
LMR-400 cable can be easily routed into and
through tight spaces without kinking.
Low Loss: LMR400 has the lowest loss of any
RG8/RG13 type cable. This is achieved through
the use of a high velocity gas-injected closed cell
foam dielectric, and bonded aluminum tape outer
conductor.
Weatherproof: The UV protected black
polyethylene jacket makes the cable rugged and
resistant to the full range of outdoor environments.
The DB version of the cable includes a water
blocking material within the braid to protect the
cable from moisture ingress and eliminates any
potential for corrosion in harsh environments or
should the jacket become damaged.
RF Shielding: The bonded aluminum tape outer
conductor is overlapped to provide 100%
coverage, resulting in >90 dB RF shielding (>180
dB crosstalk) and excellent interference immunity
(ingress and egress).
Phase Stability: The intimately bonded structure
and foam dielectric of LMR cables provide
excellent phase stability over temperature and with
bending. The high velocity dielectric results in
superior phase stability as compared with solid
and air-spaced dielectric cables.
Part Number
C40M40-40-002
C40M40-40-005
C40M40-40-010
C40M40-40-015
C40M40-40-020
C40M40-40-025
C40M40-40-040
C40M40-40-050
C40M40-40-060
C40M40-40-080
C40M40-40-100
C40M40-40-150
C40M40-40-200
C40M40-40-250
-40° / +185° F
-40° / +85° C
-94° / +185° F
-70° / + 85° C
-40° / +185° F
-40° / +85° C
Electrical Specifications
Voltage Withstand
Peak Power
Jacket Spark
2500 VDC
16 kW
8000 VRMS
Attenuation Average @ 2500 MHz
dB/100 ft
6.8
Ordering Information
Cable Type
LMR-400
LMR-400
LMR-400
LMR-400
LMR-400
LMR-400
LMR-400
LMR-400
LMR-400
LMR-400
LMR-400
LMR-400
LMR-400
LMR-400
1 in (25.4 mm)
0.5 ft lbs (0.68 N-m)
0.068 lb/ft (0.10 kg/m)
160 lbs (72.6 kg)
40 lb/in (0.71 kg/mm
Part Description
2' LMR 400 N Plug --> N plug cable
5' LMR 400 N Plug --> N plug cable
10' LMR 400 N Plug --> N plug cable
15' LMR 400 N Plug --> N plug cable
20' LMR 400 N Plug --> N plug cable
25' LMR 400 N Plug --> N plug cable
40' LMR 400 N Plug --> N plug cable
50' LMR 400 N Plug --> N plug cable
60' LMR 400 N Plug --> N plug cable
80' LMR 400 N Plug --> N plug cable
100' LMR 400 N Plug --> N plug cable
150' LMR 400 N Plug --> N plug cable
200' LMR 400 N Plug --> N plug cable
250' LMR 400 N Plug --> N plug cable
33
dB/100 m
22.2
Power kW
0.33
Cables
LMR-600 Type Cables
LMR-600 Type Cables
Mechanical Specifications
Minimum Bend Radius
Bending Movement
Weight
Tensile Strength
Flat Plate Crush
Environmental Specifications
LMR-600 Type Cables are ideal for jumper assemblies
in wireless communication systems and antenna feed
runs greater than one-hundred feet.
Installation Temp
Range
Storage Temp Range
Features and Benefits
ƒ
ƒ
ƒ
ƒ
ƒ
Operating Temp Range
Flexible: With a 1 ½ -inch minimum bend radius,
LMR-600 cable can be easily routed into and
through tight spaces without kinking.
Low Loss: LMR-600 has the lowest loss of any ½inch superflex cable. This is achieved through the
use of a high velocity gas-injected closed cell foam
dielectric, and bonded aluminum tape outer
conductor.
Weatherproof: The UV protected black
polyethylene jacket makes the cable rugged and
resistant to the full range of outdoor environments.
The DB version of the cable includes a water
blocking material within the braid to protect the
cable from moisture ingress and eliminates any
potential for corrosion in harsh environments or
should the jacket become damaged.
RF Shielding: The bonded aluminum tape outer
conductor is overlapped to provide 100%
coverage, resulting in >90 dB RF shielding (>180
dB crosstalk) and excellent interference immunity
(ingress and egress).
Phase Stability: The intimately bonded structure
and foam dielectric of LMR cables provide
excellent phase stability over temperature and with
bending. The high velocity dielectric results in
superior phase stability as compared with solid
and air-spaced dielectric cables.
Part Number
C60M40-40-050
C60M40-40-060
C60M40-40-080
C60M40-40-100
C60M40-40-125
C60M40-40-150
C60M40-40-200
-40° / +185° F
-40° / +85° C
-94° / +185° F
-70° / + 85° C
-40° / +185° F
-40° / +85° C
Electrical Specifications
Voltage Withstand
Peak Power
Jacket Spark
4000 VDC
40 kW
8000 VRMS
Attenuation Average @ 2500 MHz
dB/100 ft
4.4
Ordering Information
Cable Type
LMR-600
LMR-600
LMR-600
LMR-600
LMR-600
LMR-600
LMR-600
1.5 in (38.1 mm)
2.75 ft lbs (3.73 N-m)
0.031 lb/ft (0.20 kg/m)
350 lbs (158.9 kg)
60 lb/in (1.07 kg/mm
Part Description
50' LMR 600 N Plug --> N plug cable
60' LMR 600 N Plug --> N plug cable
80' LMR 600 N Plug --> N plug cable
100' LMR 600 N Plug --> N plug cable
125' LMR 600 N Plug --> N plug cable
150' LMR 600 N Plug --> N plug cable
200' LMR 600 N Plug --> N plug cable
34
dB/100 m
14.5
Power kW
0.52
Cables
VXL Series 7/8-inch Standard Cable
Mechanical Specifications
VXL5-50 Type Cables
Nominal Size
Jacket O.D.
Minimum Bend Radius
One Time Minimum
Bend Radius
Bending Movement
Number of Bends
Weight
Tensile Strength
Flat Plate Crush
Andrews VXL Series 7/8-inch Standard Cable,
Standard Jacket VXL5-50 flexible feeder cable uses
advanced processing technology to provide a lower
cost/higher performance solution for wireless
applications. Versatile and flexible, VXL series cable is
ideal for installation in difficult areas such as lift shafts,
monopoles, and collocated sites.
Installation Temp
Range
Storage Temp Range
VXL series cable makes the job go faster. VXL cable is
easier to handle, easier to bend, and easier to install.
Using “jumperless” VXL5-50 reduces the number of
connectors and weatherproofing. The result is a faster
tower build out.
Operating Temp Range
-40° / +185° F
-40° / +85° C
-40° / +140° F
-70° / + 60° C
-67° / +185° F
-55° / +85° C
Electrical Specifications
Voltage Withstand
Peak Power
Jacket Spark
The lowest loss solution in the industry
When used as a one-piece feeder line, VXL5-50
requires no antenna jumpers. It lowers VSWR, reduces
insertion loss, and minimizes installation time. System
designers and engineers can eliminate the need for
jumper cables when VXL5-50, a 7/8-inch feeder cable
is specified. It is suitable for continuous cable runs from
the base station cabinet to the antenna.
1000 VDC
90 kW
8000 VRMS
Attenuation Average @ 2500 MHz
dB/100 ft
2.18
Ordering Information
Part Number
CVX540-40-100
CVX540-40-120
CVX540-40-140
CVX540-40-160
CVX540-40-180
CVX540-40-200
CVX540-40-400
12 ft lbs (16.3 N-m)
15 min (40 typical)
0.29 lb/ft (0.431 kg/m)
225 lbs (102 kg)
80 lb/in (1.4 kg/mm
Environmental Specifications
Faster Site Completion
Cable Type
VXL5-50
VXL5-50
VXL5-50
VXL5-50
VXL5-50
VXL5-50
VXL5-50
7/8-in
1.08 in (27.5 mm)
5 in (125 mm)
3.5 in (89 mm)
Part Description
100' VXL5 N Plug --> N plug cable
120' VXL5 N Plug --> N plug cable
140' VXL5 N Plug --> N plug cable
160' VXL5 N Plug --> N plug cable
180' VXL5 N Plug --> N plug cable
200' VXL5 N Plug --> N plug cable
400' VXL5 N Plug --> N plug cable
35
dB/100 m
7.15
Power kW
1.21
Cables
Extension and Conversion Cables
Cables
The following Extension and Conversion Cables can be purchased for use with RadioLinx products.
Extension Cables
C19M10-30-0XX (RP-SMA Plug to RP-SMA Jack)
LMR-195 Extension Cable with reverse polarity, right angle
RP SMA female type connector on radio side and reverse
polarity, SMA bulkhead connector on antenna side. Use to
remotely mount antennas with RP female connectors.
C40M40-40-XXX, C60M40-40-XXX, and CVX540-40-XXX (N Plug to N Plug)
LMR-400, 600, VLX5 type extension cables with standard
N plug connector on both ends. Use to connect antenna to
lightning protector on bulkhead.
Conversion Cables
C19M10-40-0XX (RP-SMA Plug to N Plug)
LMR-195 type Conversion Cable with reverse-polarity, right
angle RP SMA female type connector on radio side and
standard N male plug connector on antenna side. Converts
SMA connector type to N plug type and normally attaches
to enclosure side bulkhead lightning protector.
C19M10-80-0XX (RP-SMA Plug to N Jack)
LMR-195 type conversion cable with reverse polarity, right
angle SMA female type connector on radio side and
standard N bulkhead connector on antenna side. Converts
SMA connector type to N bulkhead and normally attaches
to extension cable on outside of enclosure for indoor
applications (i.e., no lightning protector)
C10M15-30-0XX (MMCX to RP-SMA Jack)
Cable for use with PC card radios.
C10M15-40-0XX (MMCX to N Plug)
Cable for use with PC card radios.
36
Cables
Cable Numbering
Cable Numbering
The following Cable Numbering chart shows a cable number example, and how the numbering is broken down.
C40M40-40-020
C
40M
40
40
020
Designator for
Cable
Cable Type
First Connector
End Connector
Length
LMR400
N Plug
N Plug
Measured in Feet
Cable Types
19M = LMR195
40M = LMR400
60M = LMR600
VX5 = VXL5
Connector Types
RP = Reverse Polarity
RA = Right Angle
Jack = threads on the outside
BH = Bulkhead
Plug = threads on the inside
SMA = SMA Type Connector
N = N Type Connector
Connector Numbers
10 = RA RP SMA Plug
20 = RP SMA Plug
30 = RP SMA BH Jack
40 = N Plug
50 = N Jack
60 = RA N Plug
80 = N Jack BH
37
Amplifiers
Items in this Section
• RLX-500 Amplifier
40
• RLX-500 Amplifier Kit
41
Amplifiers
RLX-500 Amplifier
Specifications
RLX-500 Amplifier
Frequency Coverage
Supply Voltage
Receive Gain
Receive High Level
AGC Gain
Noise Figure
Tx to Rx Switching
IP3 (Input)
Transmit AGC Gain
RF Input Power for Turn
On
Harmonic Rejection
Supply Current
Rx to Tx Switching
Maximum Ratings
The RadioLinx RLX-500 Amplifier series are Automatic
Gain Control (AGC) compensated for constant power
output bi-directional amplification. This provides
constant maximum output power at the antenna over a
wide RF input range. An antenna amplifier significantly
improves the link reliability and operating range by low
noise amplification in receive mode, and spectrally
clean power amplification in transmit mode. This
amplifier has unique internal 3-pole filtering and AGC in
both the Tx and Rx paths. This combination provides
exceptional cosite performance in high traffic areas.
System Filtering
RF Connector Size
Weight
Chassis
The bi-directional amplifier may be needed if an
application requires long lengths of coaxial cable to
reach the antenna. The amplifier is designed to put
maximum power right at the antenna and boost the
received signal primarily to overcome cable loss and
improve overall receiver signal quality. Only the RLX500 amplifier has been specifically FCC approved for
use with the RadioLinx RLX-IH Hotspot radio.
Indicator LED
Features and Benefits
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Lightning Suppression
High dynamic range
3 poles of high Q filtering in both Tx and Rx paths
Extremely low transmit harmonics
Transmit AGC
Low receive noise figure
Internal lightning protection
Rx high level AGC (preserves noise figure while
providing maximum input dynamic range even with
high inband RF levels
Tx/Rx LED indicator
Automatically switches between Tx/Rx
Rugged weatherproof housing
2.44 GHz +/-50 MHz
+12 to 15 VDC
20 dB +/- 2dB
Maintains receive chain
linearity when receive.
Pin > -12 dBm by
automatically reducing
gain. High level receive
gain - 4 dB +/- 2dB
4.5 dB
2 µSec
+13 dBm
Automatically adjusts to
specified power output
loop 3 dB bandwidth =
150 KHz
> +2 dBm to +20 dBm
> 70 dBc @ Power Out
< 900 mA
2 µSec
Pin (Radio port) + 30
dBm
Pin (Antenna port) + 27
dBm
An internal 3-pole filter
in both Rx and Tx paths
provides superior cosite
performance achieving
maximum dynamic
range and low harmonic
distortion
2.53” x 5.90” x1.45” (N
type jack connectors)
< 15 oz.
Watertight diecast
aluminum with black
powder paint. Internal
PCB is sealed via
conformal coating to
enhance weather
protection.
Green LED - Rx mode,
Red LED - Tx mode.
¼ wavelength short
Ordering Information
RLX-500
40
500 mW Power Amplifier
with DC Injector
Amplifiers
RLX-500 Amplifier Kit
RLX-500 Amplifier Kit
Kit Contents
The RLX-500 Amplifier Kit includes:
Item
1
2
3
4
5
6
7
8
9
10
11
12
Description
RLX-500 Amplifier (outdoor rated)
RLX-500 DC Injector (indoor rated)
12 VDC wall mount
Aluminum “L” Pole mounting bracket
¼-inch stainless steel pan head screws
2.5 -inch stainless steel U bolt kit with
hardware
Strips of coaxial seal tape
2 foot LMR-195 RA RP SMA plug to RA N
plug Cable
3 foot LMR-195 RA N plug to N plug cable
N jack to N jack bulkhead lightning
protector
N jack to N jack in-line lightning protector
Superflex 400 N plug to N plug extension
cable (length varies with part number)
Quantity
1
1
1
1
2
1
2
1
2
1
1
1
Important Note:
The kit items shown in the table are only included when you order the entire RLX-500 kit. The kit will have a part number
of RLX-500-XXX. If you only order part number RLX-500, you only receive items 1 through 7.
Installation Guidelines
Each RLX-500 amplifier is equipped with internal ¼ wave technology lightning protection. However, for additional
protection, the RLX-500 kit provides additional lightning arrestors between the antenna and the RLX-500 amplifier and
between the radio and the RLX-500 DC injector. This arrestor should be grounded properly with a heavy gauge ground
12AWG wire.
1
The RLX-500 amplification device is a RadioLinx subassembly and its use has been FCC approved for use in an RF
system. The RLX-500 kit has been pre-designed to meet FCC approval and use under the following guidelines:
2
The bi-directional amplifier has been designed to operate with a cable loss between the radio and amplifier of 6.5 dB
to 20 dB. Within this range, the output of the amplifier will always be ½ W regardless of the input level.
3
The amplifier may not be used with less than 6.5 dB cable loss.
4
Use of the amplifier outside of these guidelines will result in violation of 47 CFR Part 15 FCC Rules, under which the
equipment has been authorized.
5
With more than 20 dB of coaxial cable loss, the amplifier will not turn on.
6
Maximum antenna transmit gain allowed for use with the RLX-500 amplifier is 15 dBi for point-to-point paths and 9
dBi for point-to-multipoint paths.
Ordering Information
RLX-500-050
RLX-500-075
RLX-500-100
RLX-500-150
RLX-500-200
500 mW Power Amplifier Kit with
50 ft extension cable
500 mW Power Amplifier Kit with
75 ft extension cable
500 mW Power Amplifier Kit with
100 ft extension cable
500 mW Power Amplifier Kit with
150 ft extension cable
500 mW Power Amplifier Kit with
200 ft extension cable
41
Lightning Protection
Items in this Section
• Lightning Protection
44
Lightning Protection
Lightning Protection
Lightning Protection
LP-24002
RadioLinx Lightning Protection is designed to provide
protection for broadband wireless, Wi-Fi, and WLAN
systems with low RF power and excellent protection for
less exposed subscriber units.
The LP-24002 lightning protection is designed for use
internal to an enclosure with the bulkhead fitting
protruding the enclosure from the inside. The
connectors are standard N jack connector to standard
N jack BH connector. The bulkhead fitting can be
connected to any standard N type connector extension
cable.
Features
ƒ
ƒ
ƒ
ƒ
Multi-strike capability
Fully weatherized housing
Low throughput energy
DC blocked
Technical Specifications
Surge Capabilities
Frequency Range
Return Loss
Insertion Loss
RF Power
Temperature
Operating/Storage
Relative Humidity
Surge Throughput
Energy
Peak Let-Through
Voltage
IEC 1000-4-5, 8/20µs
@ 10kA
2.0 to 6.0 GHz
> 20 dB
≤ 0.2 dB
10W
-40° to + 85° C
0 to 100% condensing
≤ 0.5µJ
(6kV/3kA 8/20µs)
± 3V (6kV/3kA 8/20µs)
LP-24003
The LP-24003 lightning protection is designed for use
internal to an enclosure with the bulkhead fitting
protruding the enclosure from the inside connecting to a
N plug barrel adapter. The barrel adapter fitting can be
connected to any antenna standard N type connector.
Ordering Information
LP-24002
LP-24003
Lightning Protector
Lightning Protector
with barrel adapter
44
Power Divider
Items in this Section
• Power Dividers
46
Power Divider
Power Dividers
Power Divider Kit
RadioLinx Power Dividers come in both 2 way and 3 way divider models.
Ordering Information
Part Number
RLX-PD2
RLX-PD3
Description
2 way divider kit
3 way divider kit
Insertion Loss
3.0 dB
5.0 dB
46
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising