SUPERNAIT 2 Integrated Amplifier
SUPERNAIT 2 Integrated Amplifier
Overview:
The SUPERNAIT 2 combines a muscular 80 Watts per channel power amplifier with six analogue inputs. In terms of both performance and
hardware, it is conceptually as close as it is possible to get to separate pre and power amps in one box. It borrows advanced technology from
Naim’s flagship preamplifiers, the NAC 552, and in employing the latest Naim DR (Discrete Regulator) techniques in its power supply, sits right at
the forefront of Naim amplifier technology. It is also constructed in the classic Naim full height extruded aluminium enclosure.
Features:
80W per channel (in 8 ohms), 130W per channgel (into 4 ohms)
Built in Naim DR (Discrete Regulator) supplying preamplifier section
¼? (6.35mm) headphone output and high-quality Class-A headphone amplifier
Constant current source circuit technique employed (introduced in NAC 552 preamplifier) to provide ultra-quiet drive signals for relays to
improve sound quality
All inputs are individually decoupled and hand-wired for improved microphonic isolation (as per NAC 282 upwards)
Ceramic heat sink isolation for improved sound quality on power and preamp section
Performance upgradable via Naim FlatCap, HiCap or SuperCap power supplies
Powered input for use with StageLine or SuperLine phono stages
USB-mini B for future software upgrades
British build and design
1/3
Specification:
AUDIO INPUTS
Input Level
Input Sensitivity
Analogue Inputs
USER CONTROL INTERFACE
Suitable for 2V sources (0.5 to 5.0V)
130mV
4 x DIN/RCA pair, 1 x RCA pair, 1 x DIN (for Naim phono amplifier)
Front Panel
AUDIO OUTPUTS
Volume control, balance control and front panel buttons
Line Outputs Fixed (level)
Line Outputs Variable (level)
Power Output
Headphone outputs
SPEAKER OUTPUTS
AV (DIN), HDD (DIN) 130mV, 600?
Pre-amp (DIN), bi-amp (DIN), sub (RCA pair) 775mV, 50?
+24V for Naim phono amplifier
¼ inch (6.35mm) TRS Socket
Power Output
UPGRADES
80W per channel into 8?, 130W per channel into 4?
Power Supply
CONNECTIVITY
FlatCap, HiCap or SuperCap
Remote Control
Remote Input
Updates
POWER
Infra-Red (RC5)
1 x 3.5mm jack on rear
1 x USB mini-B
Mains Supply
Power Consumption (quiescent)
Power Consumption (maximum)
PHYSICAL
100V, 115V, 230V; 50 or 60Hz
37VA
400VA
Dimensions
Weight
Supplied With
OTHER
87 x 432 x 314 (H x W x D)
13.4kg
NARCOM-4 remote control
Suggested System
FINISH
CDX2 CD player or NDX network player
Front
Case
Brushed and black anodised aluminium
Black powder coated aluminium
Reviews
Here is a selection of reviews that have been written about this product.
What Hi-Fi?-February 2014
"It delivers a huge slice of Naim’s addictive sound at a still sensible price"
Please visit your neareset retailer for a demonstration:
naimaudio.com/find-a-retailer
Naim Audio Limited
Southampton Road • Salisbury • England • SP1 2LN
Tel: +44 (0) 1722 426600 • Fax: +44 (0) 871 230 1012
naimaudio.com
2/3
3/3
Powered by TCPDF (www.tcpdf.org)
Powered by TCPDF (www.tcpdf.org)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising