The most powerful allrounder.

The most powerful allrounder.
Hilti TE 60
combihammer
The most powerful allrounder.
Hilti. Outperform. Outlast.
Hilti TE 60
combihammer
Applications
• Drilling holes 18 to 30 mm dia. in
concrete, masonry and natural stone
for heavy-duty anchors
• Pipe penetrations up to 66 mm dia.
• Socket cutting up to 82 mm dia.
• Breaching and medium-heavy demolition using pointed and flat chisels
• Working with wide-flat, hollow, mortar
and channel chisels or bushing tools
Advantages
More power in safe hands.
For top drilling and chiseling
performance.
Not only does it offer top performance, tremendous versatility and exceptional
working comfort, thanks to built-in ATC Active Torque Control and the latest
AVR Active Vibration Reduction system, the new Hilti TE 60 combihammer
is also a very safe investment. Featuring superb ergonomic design
and a powerful motor, the TE 60 is simply without equal in
the 6 kg combihammer class.
• Second gear for drilling with high
torque, without hammering, in wood
and steel and for occasional drilling in
masonry with PCM core bits
• Powerful 1200W motor but extremely
compact dimensions
• Ruggedly built for long life
• Center of gravity close to the grip for
good balance and handling
• Hilti TPS electronic theft protection system
Highlights
• Active Torque Control – ATC offers maximum safety and unrestricted working
comfort thanks to automatic cut-out in
critical situations.
SDS max
• Active Vibration Reduction – Compared
with conventional types, power tools
equipped with AVR reduce virbration by
up to two thirds and thus offer efficient
protection from the effects of longtherm exposure to vibration.
Superb handling thanks to good balance
and perfect ergonomic design offers
great versatility.
Exceptionally low vibration makes the tool
easier to work with, especially when
chiseling.
Drilling in masonry with PCM core bits
(DD-BI PCM up to 82 mm) at a speed of
700 /min. without hammering.
Hilti TE 60
combihammer
Working safety
has top priority.
Active Vibration Reduction (AVR)
A built-in mass damper system absorbs
vibration from the entire machine.
Active Torque Control (ATC)
Unbeaten working comfort: In potentially
dangerous situations, i.e. when the drill bit
sticks, the tool switches itself off fully automatically in a fraction of a second.
Count on Hilti.
Hilti power tools, drill bits and chisels are
developed together, tested together and
perfectly matched to each other.
Performance data
Rated power (W)
Single impact energy (full power) (J)
TE 60
1200
TE 50
1050
7
7
5.2
Triaxial vibration, hammer drilling (m/s )
9
18.5
16.1
Triaxial vibration, chiseling (m/s )
8.5
14
11.3
Speed with/without hammering ( /min. )
480 – 700
2
2
Anything but business as usual:
First-class service for all Hilti tools –
for the tool’s entire lifetime!
TE 60-ATC/AVR
1200
480
555
Hammering speed at full power (blows/min.) 2785
2785
3180
Dimensions L3W3H (mm)
4833983284
4833983245
46231133243
Weight as per EPTA 1/2003 (kg)
7.4
6.3
5.7
Right of technical changes reserved.
Hilti TE 60
combihammer
TE 60 combihammer
Ordering designation
Item no.
Hilti TE 60 with ATC and AVR
000000
Equipped with TE-Y (SDS-max) chuck, 4-meter supply cord, ATC Active Torque Control,
AVR Active Vibration Reduction, dust shield, cleaning cloth, safety instructions, operating instructions,
packed in the new durable impact-resistant plastic Hilti toolbox
Hilti TE 60
000000
Drill bits and chisels
The complete size range is listed. Please note the recommended diameters.
TE-YX drill bits
000000
With TE-Y connection end (SDS-max), 12-40 mm dia. (18-30 mm dia. recommended for TE 60)
Pointed, flat, wide-flat, flexible, channel, mortar and joint chisels
000000
With TE-Y connection end
TE-Y-BK percussion core bits
000000
With TE-Y connection end, 45 – 150 mm dia. (45-90 mm recommended for TE 60)
TE-Y-GB breach bits
000000
With TE-Y connection end, 40 – 80 mm dia. (40-66 mm recommended for TE 60)
DD-SC PCM diamond core bits
000000
With adaptor for TE-Y connection end, diameters up to 162 mm (52-82 mm recommended for TE 60)
Chucks and accessories
Keyless quick-release chuck
060208
TE-Y chuck holder
263359
For wood / metal drill bits and mixing paddles with straight shank up to 13 mm dia.
(without hammering action)
382390
TE-Y-AD extension adapter
For drilling extra-deep holes 32 mm dia. and larger with standard-length TE-Y hammer drill bits
TE-Y 350 mm extension
001952
TE-Y 600 mm extension
001953
TE-Y 850 mm extension
001954
For drilling extra-deep holes 32 mm dia. and larger with standard-length TE-Y hammer drill bits
Productivity plus
Laser range meters for
easy, accurate distance
measurement
Rugged reciprocating
saws for cutting materials
of virtually all kinds
High-performance
breakers with AVR for
demanding demolition work
User-friendly, cost-efficient
diamond coring machines
featuring compact design
and advanced engineering
Hilti. Outperform. Outlast.
Hilti Corporation I 9494 Schaan I Liechtenstein I P +423-234 2111 I F +423-234 2965 I www.hilti.com
Hilti = registered trademark of Hilti Corp., Schaan | W 3498 0608 0-en | 1 Printed in Liechtenstein | © 2008 | Right of technical and programme changes reserved S. E. & O.
Equipped with TE-Y (SDS-max) chuck, 4-meter supply cord, dust shield, cleaning cloth,
safety instructions, operating instructions, packed in the new durable impact-resistant
plastic Hilti toolbox
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising