Rev 2000-04
Rev 2000-04
TIP
TIP CATALOG
CATALOG
Hakko prides itself in the consistently high quality of the materials and workmanship
that go into its products, which include our various soldering and desoldering tips.
Hakko tips are designed and manufactured for maximum heat conductivity,
performance, and life.
TIP MAINTENANCE AND CLEANING PROCEDURES
SELECTING THE PROPER TIP FOR THE JOB.
–
Short tips with larger dimensions will provide better heat transfer and
performance than longer, thinner tips.
–
One common problem is not matching the tip size to the job. This can
cause a drop in the performance of your soldering irons and affect the
reliability of your work.
–
Matching the tip size and configuration to the job is as important as any
other aspect of soldering, and in many cases is more important. Always
use a tip as wide and thick as possible, making sure that it does not
interfere with components or overlap the pad and touch the board.
KEEP TIPS ‘WET’.
–
Applying solder to the working surface of the tip will prevent oxidation and
impurities from building up. This promotes long tip life.
KEEP TIPS CLEAN.
–
Stroking the tip surface across a clean and properly damp cellulose
sponge will keep flux residues, solder impurities, and oxidation from
forming on the surface of the tip. Immediately re-wet the tip with solder
after wiping, or before any extended period when the iron will not be used.
BASIC STYLE OF “HAKKO” SOLDERING IRON TIPS
SHAPE ‘A’
Pyramid
Type
Conical
Type
SHAPE ‘B’
SHAPE ‘C’
Bevel
Type
Chisel
Type
2
SHAPE ‘D’
* These tips are tinned
on the flat only.
Table of Contents
Tip Maintenance and Cleaning Procedures . . . . . . . . . . . . .2
For HAKKO Soldering Stations
911 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
For Model 941
pg. 4
900M/907 & 913 Series . . . . . . . . . . . . . . . . . . . . . . . . . . .6
For Models 936, 937, 926†, 927†, 928, 702†, 703†, 703B
pgs. 6, 8, 9 & 18
900L/908 & 914 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
For Models 936, 937, 926†, 927†, 928, 702†, 703†, 703B
900S Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
For Models 936, 937, 928, 702†,703†, 703B
pgs. 6, 8, 9 & 18
903 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
For Models 939, 929†
pgs. 6, 8, 9 & 18
455 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
For 455 Iron
456 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
For 456 Iron
pg. 10 & 18
918 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
For Mach I Iron (models 918)
920 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
For Mach I Iron (models 920, 921, 922)
pg. 13
N452 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
For Dash Iron (model N452, N453)
N454 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
For Dash Iron (model N454)
pgs. 14 & 15
950 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
For Models 936, 937, 939, 926†, 927†, 928, 702†,
703†, 703B
pgs. 16 & 17
For HAKKO Desoldering Stations
802/807/808 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
For Models 470†, 470B, 471, 472†, 472B, 473, 702†,
703†, 703B
pg. 20
481 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
For Models 481†, 706†
pg. 20
483 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
For Models 483†, 700†, 707†, 800†
For good maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Probable causes of early tip failure . . . . . . . . . . . . . . . . . .23
pgs. 6, 8, 9, 18 & 20
† Discontinued Product
Note: dimensions in ( ) = inches
pg. 18
3
911 Series
T1-4D Shape-4D Chisel
ø4
(ø0.16)
T1-B Shape-B Conical
R
(0 0.2
.0
1)
(0.16)
0.5
(0.02)
7.5
(0.29)
T1-08D Shape-0.8D Chisel
4
7.5
(0.29)
2.5
0.5 (0.1)
(0.02)
ø1
(ø0.04)
ø0.8
(ø0.031)
T1-1BC Shape-1BC Bevel
7.5
(0.29)
T1-12D Shape-1.2D Chisel
45
10
(0.39)
2.5
0.5 (0.1)
(0.02)
ø2
(ø0.08)
ø1.2
(ø0.047)
T1-2BC Shape-2BC Bevel
45
10
(0.39)
7.5
(0.29)
T1-16D Shape-1.6D Chisel
ø3
(ø0.1)
ø1.6
(ø0.06)
T1-3BC Shape-3BC Bevel
3 (0.1)
0.5
(0.02)
7.5
(0.29)
T1-24D Shape-2.4D Chisel
45
10
(0.39)
ø4 (ø0.16)
ø2.4
(ø0.09)
T1-4C Shape-4C Bevel
(0.14) 3.5
0.5
7.5
(0.02)
(0.29)
45
10
(0.39)
4
911 Series
T1-KL Shape-KL Knife
T1-1BCF Shape-1BC Bevel
ø4 (ø0.16)
ø1
(ø0.04)
(Tinned on soldering surface only.)
45
1.5
(0.05)
10
(0.39)
45
9.5
(0.37)
left handed knife tip
T1-2B Shape-2B Conical
T1-2BCF Shape-2BC Bevel
(Tinned on soldering surface only.)
ø2
(ø0.08)
(R R0.
0. 5
02
)
10
(0.39)
45
10
(0.39)
T1-3BCF Shape-3BC Bevel
T1-02JL Shape-02RLB Bent
(Tinned on soldering surface only.)
ø3
(ø0.1)
5
3. 3)
.1
(0
30°
45
10
(0.39)
12
(0.47)
T1-4BCF Shape-4C Bevel
ø4 (ø0.16)
(Tinned on soldering surface only.)
45
10
(0.39)
ø 4 (ø0.16)
T1-K Shape-K Knife
1.5
(0.05)
R0.2
(R0.008)
45
9.5
(0.37)
5
900M/907/913 Series
60°
900M-T-0.8D
0.8 mm
(.032)
900M-T-S7
17 mm
(.670)
17 mm
(.670)
1.2 mm
(.046)
60°
900M-T-1.2D
1.2 mm
(.047)
900M-T-1C
17 mm
(.670)
1.0 mm
(.040)
15 mm
(.591)
* 900M-T-1CF
45°
900M-T-S9
1.0 mm
(.040)
900M-T-2C
16 mm
(.630)
2.0 mm
(.079)
Formerly 900M-T-S1
17 mm
(.670)
* 900M-T-2CF
45°
900M-T-1.6D
1.6 mm
(.063)
900M-T-3C
17 mm
(.670)
3.0 mm
(.118)
17 mm
(.670)
* 900M-T-3CF
45°
900M-T-2.4D
2.4 mm
(.095)
900M-T-4C
17 mm
(.670)
4.0 mm
(.158)
17 mm
(.670)
900M-T-3.2D
3.2 mm
(.126)
900M-T-I
17 mm
(.670)
.2r
(.008)
17 mm
(.670)
900M-T-S3
900M-T-B
19 mm
(.748)
5.2 mm
(.205)
* 900M-T-4CF
.5r
(.020)
17 mm
(.670)
60°
900M-T-S6
1.3 mm
(.050)
900M-T-LB
17 mm
(.670)
.2r
(.008)
6
25 mm
(.984)
900M/907/913 Series
2.0 mm
(.079)
900M-T-RT
900M-T-1.2LD
25 mm
(.984)
1.2 mm
(.047)
4.2 mm
(.166)
17 mm
(.670)
900M-T-2LD
900M-T-S8
25 mm
(.984)
2.0 mm
(.079)
.5r
(.020)
900M-T-3.2LD
. 2 mm
(.01)
25 mm
(.984)
3.2 mm
(.126)
35 mm
(1.38)
900M-T-0.2RB
4m
(0.1 m
6)
30°
15 mm
(.591)
45°
1.8 mm
(.071)
7.5
m
(0.2 m
9)
25°
900M-T-0.5C
900M-T-1.8H
.5 mm
(.020)
14 mm
(.551)
15 mm
(.591)
45°
3.5 mm
(.138)
7.5
m
(0.2 m
9)
25°
900M-T-0.8C
900M-T-H
.8 mm
(.031)
19 mm
(.748)
17 mm
(.670)
60°
45°
*900M-T-1.5CF
900M-T-K
5.0 mm
(.197)
1.5 mm
(.059)
15 mm
(.591)
15 mm
(.591)
(.008)
.2r
900M-T-SB
900M-T-S4
.2r
(.008)
2.0 mm
(.079)
15 mm
(.591)
3.2 mm
(.126)
14 mm
(.551)
(.008)
.2r
900M-T-SI
900M-T-R
5.0 mm
(.201)
13 mm
(.512)
17 mm
(.670)
7
900L/908/914 Series
45°
900L-T-1.6D
1.6 mm
(.063)
900L-T-3C
20 mm
(.788)
3.0 mm
(.118)
20 mm
(.788)
* 900L - T-3CF
45°
900L-T-2.4D
900L-T-4C
20 mm
(.788)
2.4 mm
(.095)
20 mm
(.788)
4.0 mm
(.158)
900L-T-3.2D
3.2 mm
(.126)
* 900L-T-4CF
900L-T-I
.2r
(.008)
20 mm
(.788)
20 mm
(.788)
45°
900L-T-K
900L-T-S1
5.6 mm
(.221)
19 mm
(.748)
5.0 mm
(.197)
18 mm
(.709)
45°
900L-T-5C
900L-T-B
.5r
(.020)
20 mm
(.788)
5.0 mm
(.197)
900L-T-2B
2.0 mm
(.079)
20 mm
(.788)
900L-T-LB
25 mm
(.984)
.2r
(.008)
45°
900L-T-2C
2.0 mm
(.079)
20 mm
(.788)
* 900L-T-2CF
8
15 mm
(.591)
* 900L-T-5CF
900S Series
900S-T-1.2D
1.2 mm
(.047)
17 mm
(.670)
900S-T-1.6D
17 mm
(.670)
1.6 mm
(.063)
60°
900S-T-1C
1.0 mm
(.040)
15 mm
(.591)
45°
900S-T-2C
2.0 mm
(.079)
17 mm
(.670)
900S-T-B
.5r
(.020)
17 mm
(.670)
900S-T-I
.2r
(.008)
17 mm
(.670)
9
903 Series
SHAPE: SI
SHAPE: 0.8D
A1252
A1243
.2r
(.008)
15 mm
(.591)
0.8 mm
(.031)
12.0 mm
(.472)
SHAPE: 0.8SD
SHAPE: 1.6D
A1253
A1244
0.8 mm
(.031)
15 mm
(.591)
1.6 mm
(.063)
10 mm
(.394)
SHAPE: 1.2SD
SHAPE: 2.4D
A1254
A1245
1.2 mm
10 mm
(.047)
(.394)
8 mm
(.315)
2.4 mm
(.094)
SHAPE: 5.2D
SHAPE: .04SC
60°
A1255
A1246
5.2 mm
(.205)
14 mm
(.557)
0.4 mm
(.016)
8 mm
(.315)
SHAPE: 3.2D
SHAPE: B
A1256
A1247
15 mm
(.591)
.5r
(.020)
3.2 mm
(.13)
SHAPE: I
8 mm
(.315)
SHAPE: 2.4LD
2.4 mm
(.094)
A1248
A1266
15 mm
(.591)
15 mm
(.591)
.2r
(.008)
SHAPE: K
SHAPE: 1.2C
60°
5 mm
(.197)
A1249
15 mm
(.591)
1.2 mm
(.047)
45°
A1268
15 mm
(.591)
SHAPE: 0.2RSB
SHAPE: 0.2RB
30°
60°
A1269
A1250
.2r
(.008)
.2r
(.008)
15 mm
(.591)
10
15 mm
(.591)
903 Series
SHAPE: 1C
SHAPE: R2 (3.5)
60°
A1332
1.0 mm
(.040)
A1270
15 mm
(.591)
1.5 mm
(.059)
5.9 mm 3.5 mm
(.232) (.138)
5.2 mm
(.205)
SHAPE: SOP 5.1 X 4.3
SHAPE: 4.5D
4.5 mm
(.177)
A1333
A1271
6.7 mm 5.1 mm
4.3 mm
(.264) (.201)
(.169)
SHAPE: SOP 5.1 x 10.2
15 mm
(.591)
SHAPE: 1.2D
5.3 mm
(.209)
A1334
A1326
1.2 mm
(.047)
9.9 mm
(.390)
SHAPE: 0.8SC
10.2 mm
(.402)
SHAPE: SOP 9.5 x 13.3
60°
6.7 mm 5.1 mm
(.264) (.201) 5.3 mm
(.209)
A1335
A1327
14.2 mm
(.559)
0.8 mm
(.031)
SHAPE: 0.2RSSB
13.3 mm
(.524)
A1328
.2r
(.008)
A1336
7.0 mm
(.276)
4.0 mm 2.3 mm
1.3 mm (.181) (.091)
(.051)
6.4 mm
(.252)
SHAPE: SPATULA 10.4
.2r
(.008)
SHAPE: IS
3.0 mm
(.118)
A1329
A1337
14.7 mm
(.579)
SHAPE: 2.8C
10.4 mm
(.409)
SHAPE: SPATULA 20.8
60°
0.2 mm
(.008)
9.5 mm
(.374)
3.0 mm
(.118)
A1330
2.8 mm
(.110)
5.5 mm
(.217)
SHAPE: R3 (2.3)
30°
1.6 mm
(.063)
11.1 mm 9.5 mm
(.437) (.374)
A1338
17.6 mm
(.693)
20.8 mm
(.819)
SHAPE: 3.2D
SHAPE: R1 (1.7)
A1331
0.2 mm
(.008)
9.5 mm
(.374)
3.2 mm
(.126)
A1341
3.4 mm 1.7 mm
2.5 mm (.134) (.067)
(.093)
0.6 mm
(.024)
6.2 mm
(.242)
11
12.0 mm
(.472)
903 Series
SHAPE: PLCC 12.7 x 12.7
SHAPE: 0.2RLB Bent
R0.2 mm (0.008)
30°
4.0 mm
(.157)
12.7 mm
(.500)
14.2 mm
(.559)
14.2 mm
(.559)
1.5 mm
(.059)
A1346
7.5 mm
(0.3)
A1339
15.8 mm
(.062)
6.0 mm
(.236)
SHAPE: PLCC 16.4 x 22.4
16.4 mm (0.64)
18.9 mm (0.74)
SHAPE: PLCC 17.8 x 17.8
4.0 mm
(.157)
19.0 mm
(.748)
17.8 mm
(.701)
19.0 mm
(.748)
1.5 mm
(.059)
A1340
22.4 mm (0.88)
22.9 mm (0.98)
A1347
6.5 mm
(0.25)
6.0 mm
(.236)
SHAPE: PLCC 25.5 x 25.5
25.5 mm (1.00)
28 mm (1.10)
SHAPE: PLCC 10.2 x 10.2
4.0 mm
(.157)
10.2 mm
(.402)
11.5 mm
(.453)
11.5 mm
(.453)
1.5 mm
(.059)
A1342
25.5 mm (1.00)
28 mm (1.10)
6.0 mm
(.236)
SHAPE: PLCC 15.2 x 12.7
4.0 mm
(.157)
14.2 mm
(.559)
12.7 mm
(.500)
15.2 mm
(.598)
16.7 mm
(.657)
1.5 mm
(.059)
A1345
6.0 mm
(.236)
12
A1348
7.5 mm
(0.29)
455/456 Series
455 Series
456 Series
SHAPE: B
SHAPE: 2B
A1047
.5r
(.020)
A1023
25 mm
(.984)
30 mm
(1.18)
1.0r
(.040)
SHAPE: 3C
SHAPE: 4C
45°
45°
A1048
3.0 mm
(.118)
A1024
25 mm
(.984)
30 mm
(1.18)
4.0 mm
(.158)
SHAPE: 4C
SHAPE: 8C
45°
45°
A1049
4.0 mm
(.158)
A1025
25 mm
(.984)
26 mm
(1.02)
8.0 mm
(.315)
SHAPE: 5C
SHAPE: SD
45°
A1050
5.0 mm
(.197)
A1026
25 mm
(.984)
5.0 mm
(.197)
SHAPE: 6C
30 mm
(1.18)
SHAPE: 6C
45°
45°
A1051
6.0 mm
(.236)
A1031
25 mm
(.984)
6.0 mm
(.236)
SHAPE: SD
SHAPE: K
30 mm
(1.18)
45°
A1032
A1052
25 mm
(.984)
5.0 mm
(.197)
SHAPE: K
9.0 mm
(.354)
30 mm
(1.18)
SHAPE: 9D
45°
A1053
9.0 mm
(.354)
A1179
25 mm
(.984)
9.0 mm
(.354)
13
30 mm
(1.18)
918 Series
918-T-1.6D
918-T-6.5D
20 mm
(.788)
1.6 mm
(.063)
6.5 mm
(.250)
918-T-2.4D
20 mm
(.788)
2.4 mm
(.095)
918-T-3.2D
20 mm
(.788)
3.0 mm
(.118)
45°
918-T-3C
3.0 mm
(.118)
22 mm
(.866)
* 918-T-3CF
45°
918-T-4C
4.0 mm
(.158)
20 mm
(.788)
* 918-T-4CF
45°
918-T-5C
5.0 mm
(.197)
20 mm
(.788)
* 918-T-5CF
60°
918-T-BC
1.6 mm
(.063)
20 mm
(.788)
918-T-B
.5r
(.020)
20 mm
(.788)
14
20 mm
(.788)
920 Series
920-T-1.0D
1.0 mm
(.040)
16 mm
(.630)
920-T-1.6D
1.6 mm
(.063)
14 mm
(.551)
920-T-SB
0.5 r
(.020)
17 mm
(.670)
920-T-2.4D
2.4 mm
(.095)
920-T-B
0.5 r
(.020)
13 mm
(.512)
920-T-I
0.5 r
(.020)
17 mm
(.670)
15 mm
(.591)
920-T-A
920-T-3.2D
19 mm
(.748)
3.2 mm
(.126)
.5 mm
(.019)
15 mm
(.591)
3.2 mm
(.126)
60°
920-T-R
920-T-BC
19 mm
(.748)
1.6 mm
(.063)
4.8 mm
(.189)
16 mm
(.630)
2.0 mm
(.079)
45°
920-T-RT
920-T-2C
2.0 mm
(.079)
14 mm
(.551)
4.2 mm
(.166)
* 920-T-2CF
45°
920-T-3C
3.0 mm
(.118)
14 mm
(.551)
* 920-T-3CF
45°
920-T-4C
4.0 mm
(.158)
15 mm
(.591)
* 920-T-4CF
15
16 mm
(.630)
N452 Series
N452-T-B
.5r
(.020)
N452-T-D
17 mm
(.670)
3.0 mm
(.118)
15 mm
(.591)
N452-T-SB
2.0
(.079)
N452-T-SD
17 mm
(.670)
2.0 mm
(.079)
17 mm
(.670)
45°
N452-T-C
1.5 mm
(.059)
N452-T-I
17 mm
(.670)
.4r
(.016)
45°
N452-T-SC
.08 mm
(.032)
17 mm
(.670)
60°
N452-T-1C
1.0 mm
(.040)
15 mm
(.591)
* N452-T-1CF
45°
N452-T-2C
2.0 mm
(.079)
17 mm
(.670)
* N452-T-2CF
45°
N452-T-3C
3.0 mm
(.118)
17 mm
(.670)
* N452-T-3CF
45°
N452-T-4C
4.0 mm
(.158)
17 mm
(.670)
* N452-T-4CF
16
17 mm
(.670)
N454 Series
N454-T-B
.5r
(.020)
20 mm
(.788)
45°
N454-T-2C
2.0 mm
(.079)
23 mm
(.905)
* N454-T-2CF
45°
N454-T-3C
3.0 mm
(.118)
22 mm
(.866 )
* N454-T-3CF
45°
N454-T-4C
20 mm
(.780)
4.0 mm
(.158)
* N454-T-4CF
45°
N454-T-5C
5.0 mm
(.197)
20 mm
(.788)
* N454-T-5CF
N454-T-D
3.0 mm
(.118)
22 mm
(.866 )
N454-T-I
.4r
(.016)
23 mm
(.905)
17
950 Series
SOP
A1390 Tip/SOP 4L
A1392 Tip/SOP 15L
4mm
(0.16 in.)
15mm
(0.91 in.)
A1391 Tip/SOP 6L
6mm
(0.24 in.)
A1383 Tip/SOP 18L
18mm
(0.71 in.)
A1380 Tip/SOP 8L
8mm
(0.31 in.)
A1384 Tip/SOP 20L
20mm
(0.79 in.)
A1381 Tip/SOP 10L
10mm
(0.39 in.)
A1385 Tip/SOP 25L
A1382 Tip/SOP 13L
25mm
(0.98 in.)
13mm
(0.51 in.)
18
950 Series
888-079 Tip/CHIP 2.6C
45°
2.6mm
(0.10 in.)
888-080 Tip/CHIP 0.7T
0.5mm
(0.02 in.)
CHIP
A1379 Tip/CHIP 1L
1mm
(0.04 in.)
A1378 Tip/CHIP 2L
2mm
(0.08 in.)
CHIP
A1388 Tip/CHIP 0.5C
0.5mm
(0.02 in.)
1.5mm
(0.06 in.)
45°
A1389 Tip/CHIP 0.5I
R0.25mm
(R0.01 in.)
19
802/807/808 Series
A1002
A1003
A1004
A1005
A1006
A1007
0.8 mm
(.032)
1.8 mm
(.071)
A1393
1.0 mm
(.040)
2.0 mm
(.079)
A1394
0.8 mm
(.032)
2.3 mm
(.091)
A1395
1.0 mm
(.040)
2.5 mm
(.099)
A1396
1.3 mm
(.051)
3.0 mm
(.118)
1.6 mm
(.063)
3.0 mm
(.118)
20
1.0 mm
(.040)
1.6 mm
(.062)
1.0 mm
(.040)
2.1 mm
(.090)
1.3 mm
(.051)
2.3 mm
(.091)
2.3 mm
(.091)
4.0 mm
(.157)
11 mm
(.434)
481/483 Series
481-T-0.8
481-T-1.0
481-T-1.3
481-T-1.6
483-T-0.8
0.8 mm
(.032)
2.5 mm
(.099)
483-T-1.0
1.0 mm
(.040)
2.5 mm
(.099)
483-T-1.3
1.3 mm
(.051)
2.5 mm
(.099)
483-T-1.6
1.6 mm
(.063)
3.0 mm
(.118)
0.8 mm
(.032)
2.5 mm
(.099)
1.0 mm
(.040)
2.5 mm
(.099)
1.3 mm
(.051)
3.0 mm
(.118)
1.6 mm
(.063)
3.0 mm
(.118)
483-T-0.8T
483-T-1.0T
483-T-1.3T
21
0.8 mm
(.032)
1.7 mm
(.067)
1.0 mm
(.040)
2.0 mm
(.079)
1.3 mm
(.051)
2.3 mm
(.091)
For long lasting use of your desoldering tools,
Keep Hakko’s “Desoldering
Maintenance Kit” by your side!
Desoldering
Maintenance K it
P/N HJ2002-01
777-090
Part No. 777-090
Maintenance Brush
Part No. A1033
Ceramic Paper Filter (L) (Set of 10)
Cleans oxides and flux residue from heater
core. Do not use on nozzles as brush will
damage the plating.
Protects the pump by filtering flux vapors at
the handpiece. Replace when face of filter is
coated with flux.
A1033
Part No. 888-001
Drill for Heating Element
Part No. A1042
Cleaning Sponge
Cleans solder and flux from the heating
element core. Use once a day.
Cleans nozzle of excess solder and oxides.
Rinse with water only. Replace sponge
when contaminated.
A1042
888-001
Part No. 888-075
Wrench
Part No. B1087
Nozzle Cleaning Pin (1.0mm)
B1086: 0.8mm, B1088: 1.3mm, B1089: 1.6mm
Removes and replaces enclosure nut,
enclosure and nozzle from heating element.
Used to clean accumulated solder from the
nozzle, preventing clogging. Match cleaning
pin diameter to nozzle hole diameter. Use
approximately every two hours of operation.
888-075
Part No. A1009
Ceramic Paper Filter (S) (Set of 10)
A1009
B1086 - B1089
Protects the pump by filtering flux vapors at
the desolder station. Replace when face of
filter is coated with flux.
Part No. B1303
Nozzle Cleaning Drill (1.0mm) with holder
Drill bit only: B1308; 0.8mm, B1310;
1.3mm, B1311; 1.6mm
Part No. A1011
Filter Holder for 802
A1011
Holds spring filter (A1030) in filter pipe
(B1128). For use with 802 handpiece only.
Replace if holder becomes stiff or cracked.
Used to remove heavy accumulation of solder from the nozzle. Use if cleaning pin can
not clean nozzle.
B1302 - B1305
Part No. A1030
Spring Filter (Set of 10)
Part No. B1915
Filter Holder for 807
Captures solder in the handpiece. Replace
when filter is 1/2 to 1/3 full of solder.
Holds spring filter (A1030) in filter pipe
(B1916). For use with 807 handpiece only.
Replace if holder becomes stiff or cracked.
A1030
B1915
22
PROBABLE CAUSES OF EARLY TIP FAILURE
HIGH LINE VOLTAGE.
–
Even though Hakko irons and stations are designed to maintain temperature with
slightly varying supply voltages, a consistently high line voltage will cause the iron to
run hot. This will reduce tip life.
LOW TIN ALLOY SOLDER.
–
The lower the tin content of your solder, the more difficult it will be to keep the tip from
‘dewetting’ (losing its protective coat of solder). Keep a roll of large diameter 63-37
solder on hand to periodically flush and re-tin the tips.
SMALL DIAMETER SOLDER.
–
In many cases, the diameter of the solder being used is too small for effective wetting
of the tips. A periodic flooding with a larger diameter solder, as mentioned above, will
do the trick.
DIFFERENCES IN FLUX ACTIONS.
(RA, RMA, water soluble, ‘No Clean’ etc.)...
–
The more active the flux, the more frequently the tip needs to be cleaned. Oxidation
forms at a much higher rate with highly active fluxes. Please check with the solder or
flux manufacturer as to the relative activity of the flux you are using.
EXCESSIVE PRESSURE, OR THE ‘PUSHING IN’ OF HEAT.
–
Applying excessive pressure, or rubbing the tip against the joint to ‘force’ heat in, will
destroy the tip faster than normal contact soldering.
TIP TEMPERATURE.
–
The higher the tip temperature, the faster oxidation will form. At temperatures
exceeding 875 deg. F, the speed of oxidation is just about twice that at 700 deg. F.
– NOTE –
Tips subjected to proper maintenance and cleaning procedures should last between two to four
weeks, depending upon the temperature, tip configuration, and the job or jobs being performed.
23
American Hakko Products, Inc.
25072 Anza Drive, Santa Clarita, CA 91355
www.hakkousa.com
Toll Free: (800) 88-HAKKO (42556)
Customer Service: (661) 294-0090
Fax: (661) 294-0096
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising