Fluke Corporation Fluke 707 Loop Calibrator Datasheet - Fluke

Fluke Corporation Fluke 707 Loop Calibrator Datasheet - Fluke
Fluke 715 mA Loop
Calibrators
Technical Data
Fluke 715 Volt/mA Calibrator
Volt Milliamp Calibrator to troubleshoot process loops
The Fluke 715 Volt/mA Calibrator delivers outstanding performance,
durability and reliability. Offered in the rugged Fluke 80 Series DMM
package, the calibrator is compact, lightweight and easy to carry. With
a push button interface similar to the multifunction Fluke 740 Series
Documenting Process Calibrators, the 715 is easy to use. It is EMI tolerant, dust/splash resistant and features a removable battery door for
quick battery changes. It features:
• Measure loop current (0 mA to 20 mA, 4 mA to 20 mA) signals
with 0.01 % accuracy and 0.001 mA resolution
• Source precision voltage signals up to 20 V with 0.01 % accuracy
• Measure voltage output process signals from PLCs, transmitters
• Source or simulate 24 mA loop current
• 24 V loop supply with simultaneous current measurement
Fluke 707 Loop Calibrator
The fastest, one-handed tool for loop checks
The Fluke 707 Loop Calibrator is a high performance solution for
calibration, repair and maintenance of current loops. The “Quick Click”
knob makes it extremely fast and easy to use. It features:
• One handed user interface with “Quick Click” detented knob
• mA sourcing, simulation and measurement
• 0.015 % accuracy and 0.001 mA resolution
• Simultaneous mA and % of span display
• Selectable step or ramp outputs
• 24 V Loop supply with mA measure, including 250 Ω HART resistor
• 0 V dc to 28 V dc measurement to check Loop Voltage
• Removable battery door for quick battery replacement
• Compact case with protective holster
• Three year warranty
Fluke 705 Loop Calibrator
Low cost calibration muscle
The Fluke 705 Loop Calibrator is a cost-effective, integrated solution for
calibration, repair and maintenance of current loops. It features:
• mA sourcing, simulation and measurement
• 0.02 % accuracy and 0.001 mA resolution
• Simultaneous mA and % of span display
• Selectable step or ramp outputs
• 24 V Loop supply with mA measure
• 0 V dc to 28 V dc measurement to check Loop Voltage
• Removable battery door for quick battery replacement
• Compact case with protective holster
• Three-year warranty
info@Fluke-Direct.ca
Fluke-Direct .ca
1.800.868.7495
General Specifications:
Maximum voltage: 30 volts: Non-operating temperature: –4 °C to 60 °C
Operating temperature: –10 °C to 55 °C
Relative humidity: 95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C)
Operating altitude: 3,000 m max
Shock: 1 m drop test
Vibration: Random, 2 g, 5 Hz to 500 Hz
Safety: CSA C22.2 No. 1010.1:1992
EMC: EN50082-1:1992 and EN55022:1994 Class B
Power: 9 V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718
Warranty: Three-years
Functional Specifications:
Fluke 705 and 707
Fluke 715
0 V to 28 V
0 mV to 200 mV / 0 V to 25 V
Voltage measurement
Range
Resolution
1 mV
10 µV / 1 mV
Accuracy
705: 0.025 % Rdg + 1 counts
707, 707Ex: 0.015 % Rdg + 2 counts
0.01 % Rdg + 2 counts
Range
0 mA to 24 mA
0 mA to 24 mA
Resolution
0.001 mA
0.001 mA
Accuracy
705: 0.02 % Rdg + 2 counts
707, 707Ex: 0.015 % Rdg + 2 counts
0.01 % + 2 counts
Current measurement
Current sourcing
Range
0 mA to 20 mA or 4 mA to 20 mA
0 mA to 20 mA or 4 mA to 20 mA
Accuracy
705: 0.02 % Rdg + 2 counts
707, 707Ex: 0.015 % Rdg + 2 counts
0.01 % Rdg + 2 counts
Drive capability
705: 1000 Ω @ 24 mA
707: 1200 Ω @ 24 mA
707Ex: 700 Ω @ 20 mA
1000 Ω @ 24 mA
Loop power while measuring mA
24 V
24 V
Voltage sourcing
n/a
0 mV to 200 mV or 0 V to 20 V
Display current and % of span
Yes
mA or %
Auto step, auto ramp
Yes
Yes
Span Check
Yes
Yes
Battery life
18 hours typical, at 12 mA
18 hours typical, at 12 mA
Fluke. Keeping your world
up and running.
Fluke Corporation
PO Box 9090, Everett, WA USA 98206
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa (31 40) 2 675 200 or
Fax (31 40) 2 675 222
In Canada (800) 36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
info@Fluke-Direct.ca
Fluke-Direct .ca
©2006 Fluke Corporation. All rights reserved.
Printed in U.S.A. 2/2006 2574106 D-EN-N Rev A
1.800.868.7495
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising